This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
DISCOVERY_FINDING shall only be set for active scanning as passive
scanning is not meant to generate MGMT Device Found events causing
discovering state to go out of sync since userspace would believe it
is discovering when in fact it is just passive scanning.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088
Fixes: 2e2515c1ba ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On a Broadcast Sink, after synchronizing to the PA transimitted by a
Broadcast Source, the BIGInfo advertising reports emitted by the
Controller hold the encryption field, which indicates whether the
Broadcast Source is transmitting encrypted streams.
This updates the PA sync hcon QoS with the encryption value reported
in the BIGInfo report, so that this information is accurate if the
userspace tries to access the QoS struct via getsockopt.
Fixes: 1d11d70d1f ("Bluetooth: ISO: Pass BIG encryption info through QoS")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_sync_established_evt is necessary to filter out cases where the
handle value is belonging to ida id range, otherwise ida will be erroneously
released in hci_conn_cleanup.
Fixes: 181a42eddd ("Bluetooth: Make handle of hci_conn be unique")
Reported-by: syzbot+b2545b087a01a7319474@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b2545b087a01a7319474
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
qos->ucast interval reffers to the SDU interval, and should not
be set to the interval value reported by the LE CIS Established
event since the latter reffers to the ISO interval. These two
interval are not the same thing:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 6, Part G
Isochronous interval:
The time between two consecutive BIS or CIS events (designated
ISO_Interval in the Link Layer)
SDU interval:
The nominal time between two consecutive SDUs that are sent or
received by the upper layer.
So this instead uses the following formula from the spec to calculate
the resulting SDU interface:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 6, Part G
page 3075:
Transport_Latency_C_To_P = CIG_Sync_Delay + (FT_C_To_P) ×
ISO_Interval + SDU_Interval_C_To_P
Transport_Latency_P_To_C = CIG_Sync_Delay + (FT_P_To_C) ×
ISO_Interval + SDU_Interval_P_To_C
Link: https://github.com/bluez/bluez/issues/823
Fixes: 2be22f1941 ("Bluetooth: hci_event: Fix parsing of CIS Established Event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some Broadcom controllers found on Apple Silicon machines abuse the
reserved bits inside the PHY fields of LE Extended Advertising Report
events for additional flags. Add a quirk to drop these and correctly
extract the Primary/Secondary_PHY field.
The following excerpt from a btmon trace shows a report received with
"Reserved" for "Primary PHY" on a 4388 controller:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x2515
Props: 0x0015
Connectable
Directed
Use legacy advertising PDUs
Data status: Complete
Reserved (0x2500)
Legacy PDU Type: Reserved (0x2515)
Address type: Random (0x01)
Address: 00:00:00:00:00:00 (Static)
Primary PHY: Reserved
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -60 dBm (0xc4)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (Apple, Inc.)
Data length: 0x00
Cc: stable@vger.kernel.org
Fixes: 2e7ed5f5e6 ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync")
Reported-by: Janne Grunau <j@jannau.net>
Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robin
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.
Fixes: e7b02296fb ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for multiple on-stack definitions
of a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
Notice that, due to the use of `__counted_by()` in `struct
hci_cp_le_create_cis`, the for loop in function `hci_cs_le_create_cis()`
had to be modified. Once the index `i`, through which `cp->cis[i]` is
accessed, falls in the interval [0, cp->num_cis), `cp->num_cis` cannot
be decremented all the way down to zero while accessing `cp->cis[]`:
net/bluetooth/hci_event.c:4310:
4310 for (i = 0; cp->num_cis; cp->num_cis--, i++) {
...
4314 handle = __le16_to_cpu(cp->cis[i].cis_handle);
otherwise, only half (one iteration before `cp->num_cis == i`) or half
plus one (one iteration before `cp->num_cis < i`) of the items in the
array will be accessed before running into an out-of-bounds issue. So,
in order to avoid this, set `cp->num_cis` to zero just after the for
loop.
Also, make use of `aux_num_cis` variable to update `cmd->num_cis` after
a `list_for_each_entry_rcu()` loop.
With these changes, fix the following warnings:
net/bluetooth/hci_sync.c:1239:56: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1415:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1731:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:6497:45: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case of a Broadcast Source that has PA enabled but no active BIG,
a Broadcast Sink needs to establish PA sync and parse BASE from PA
reports.
This commit moves the allocation of a PA sync hcon from the BIGInfo
advertising report event to the PA sync established event. After the
first complete PA report, the hcon is notified to the ISO layer. A
child socket is allocated and enqueued in the parent's accept queue.
BIGInfo reports also need to be processed, to extract the encryption
field and inform userspace. After the first BIGInfo report is received,
the PA sync hcon is notified again to the ISO layer. Since a socket will
be found this time, the socket state will transition to BT_CONNECTED and
the userspace will be woken up using sk_state_change.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure that discovery state is properly synchronized otherwise
reports may not generate MGMT DeviceFound events as it would be assumed
that it was not initiated by a discovery session.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix potential null-ptr-deref in hci_le_big_sync_established_evt().
Fixes: f777d88278 (Bluetooth: ISO: Notify user space about failed bis connections)
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.
Fixes: c569242cd4 ("Bluetooth: hci_event: set the conn encrypted before conn establishes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.
Fixes: 288c90224e ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We have a BT headset (Lenovo Thinkplus XT99), the pairing and
connecting has no problem, once this headset is paired, bluez will
remember this device and will auto re-connect it whenever the device
is powered on. The auto re-connecting works well with Windows and
Android, but with Linux, it always fails. Through debugging, we found
at the rfcomm connection stage, the bluetooth stack reports
"Connection refused - security block (0x0003)".
For this device, the re-connecting negotiation process is different
from other BT headsets, it sends the Link_KEY_REQUEST command before
the CONNECT_REQUEST completes, and it doesn't send ENCRYPT_CHANGE
command during the negotiation. When the device sends the "connect
complete" to hci, the ev->encr_mode is 1.
So here in the conn_complete_evt(), if ev->encr_mode is 1, link type
is ACL and HCI_CONN_ENCRYPT is not set, we set HCI_CONN_ENCRYPT to
this conn, and update conn->enc_key_size accordingly.
After this change, this BT headset could re-connect with Linux
successfully. This is the btmon log after applying the patch, after
receiving the "Connect Complete" with "Encryption: Enabled", will send
the command to read encryption key size:
> HCI Event: Connect Request (0x04) plen 10
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
Class: 0x240404
Major class: Audio/Video (headset, speaker, stereo, video, vcr)
Minor class: Wearable Headset Device
Rendering (Printing, Speaker)
Audio (Speaker, Microphone, Headset)
Link type: ACL (0x01)
...
> HCI Event: Link Key Request (0x17) plen 6
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
Link key: ${32-hex-digits-key}
...
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 256
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
Link type: ACL (0x01)
Encryption: Enabled (0x01)
< HCI Command: Read Encryption Key... (0x05|0x0008) plen 2
Handle: 256
< ACL Data TX: Handle 256 flags 0x00 dlen 10
L2CAP: Information Request (0x0a) ident 1 len 2
Type: Extended features supported (0x0002)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Success (0x00)
Handle: 256
Key size: 16
Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/704
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ATS2851 controller erroneously reports support for the "Read
Encryption Key Length" HCI command. This makes it unable to connect
to any devices, since this command is issued by the kernel during the
connection process in response to an "Encryption Change" HCI event.
Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command
is unsupported, preventing it from interrupting the connection process.
This is the error log from btmon before this patch:
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 2048 Address: ...
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 2048 Address: ...
> HCI Event: Command Status (0x0f) plen 4
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Unknown HCI Command (0x01)
Signed-off-by: Vinicius Peixoto <nukelet64@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
the request in req_skb so even if sent_cmd is replaced with a new
command the pending request will remain in stored in req_skb.
Fixes: 6a98e3836f ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit cec9f3c5561d ("Bluetooth: Remove BT_HS") removes config BT_HS, but
misses two "ifdef BT_HS" blocks in hci_event.c.
Remove this dead code from this removed config option.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.
hci_conn_check_pending() was used to trigger this retry, we can remove it
now.
Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.
This is somewhat reverting commit 4c67bc74f0 ("[Bluetooth] Support
concurrent connect requests").
With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BIG Sync (aka. Broadcast sink) requires to inform that the device is
connected when a data path is active otherwise userspace could attempt
to free resources allocated to the device object while scanning.
Fixes: 1d11d70d1f ("Bluetooth: ISO: Pass BIG encryption info through QoS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We have error defines already, so let's use them.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The "pending connections" feature was originally introduced with commit
4c67bc74f0 ("[Bluetooth] Support concurrent connect requests") and
6bd5741612 ("[Bluetooth] Handling pending connect attempts after
inquiry") to handle controllers supporting only a single connection request
at a time. Later things were extended to also cancel ongoing inquiries on
connect() with commit 89e65975fe ("Bluetooth: Cancel Inquiry before
Create Connection").
With commit a9de924806 ("[Bluetooth] Switch from OGF+OCF to using only
opcodes"), hci_conn_check_pending() was introduced as a helper to
consolidate a few places where we check for pending connections (indicated
by the BT_CONNECT2 flag) and then try to connect.
This refactoring commit also snuck in two more calls to
hci_conn_check_pending():
- One is in the failure callback of hci_cs_inquiry(), this one probably
makes sense: If we send an "HCI Inquiry" command and then immediately
after a "Create Connection" command, the "Create Connection" command might
fail before the "HCI Inquiry" command, and then we want to retry the
"Create Connection" on failure of the "HCI Inquiry".
- The other added call to hci_conn_check_pending() is in the event handler
for the "Remote Name" event, this seems unrelated and is possibly a
copy-paste error, so remove that one.
Fixes: a9de924806 ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]
That was revoled by commit c49a8682fc ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.
So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.
[0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869
Fixes: 68d19d7d99 ("Revert "Bluetooth: validate BLE connection interval updates"")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection_Request, so causes recording wakeup BD_ADDR error and
potential stability issue, fix it by using the correct field.
Fixes: 2f20216c1d ("Bluetooth: Emit controller suspend and resume events")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts 19f8def031
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.
Fixes: 19f8def031 ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:
net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
524 | memcpy(hdev->dev_class, rp->dev_class, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.
Add another explicit check for the same condition to make sure gcc sees
this cannot happen.
Fixes: a9de924806 ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some layers such as SMP depend on getting notified about encryption
changes immediately as they only allow certain PDU to be transmitted
over an encrypted link which may cause SMP implementation to reject
valid PDUs received thus causing pairing to fail when it shouldn't.
Fixes: 7aca0ac479 ("Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes: 9f78191cc9 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the cleanup callback for slave bis and pa sync hcons.
Closing all bis hcons will trigger BIG Terminate Sync, while closing
all bises and the pa sync hcon will also trigger PA Terminate Sync.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.
After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.
After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bacmp() is a wrapper around memcpy(), which contain compile-time
checks for buffer overflow. Since the hci_conn_request_evt() also calls
bt_dev_dbg() with an implicit NULL pointer check, the compiler is now
aware of a case where 'hdev' is NULL and treats this as meaning that
zero bytes are available:
In file included from net/bluetooth/hci_event.c:32:
In function 'bacmp',
inlined from 'hci_conn_request_evt' at net/bluetooth/hci_event.c:3276:7:
include/net/bluetooth/bluetooth.h:364:16: error: 'memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
364 | return memcmp(ba1, ba2, sizeof(bdaddr_t));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add another NULL pointer check before the bacmp() to ensure the compiler
understands the code flow enough to not warn about it. Since the patch
that introduced the warning is marked for stable backports, this one
should also go that way to avoid introducing build regressions.
Fixes: 1ffc6f8cc3 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Cc: Kees Cook <keescook@chromium.org>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following code style problem:
ERROR: that open brace { should be on the previous line
+ if (!bacmp(&hdev->bdaddr, &ev->bdaddr))
+ {
Fixes: 1ffc6f8cc3 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
memcmp is not consider safe to use with cryptographic secrets:
'Do not use memcmp() to compare security critical data, such as
cryptographic secrets, because the required CPU time depends on the
number of equal bytes.'
While usage of memcmp for ZERO_KEY may not be considered a security
critical data, it can lead to more usage of memcmp with pairing keys
which could introduce more security problems.
Fixes: 455c2ff0a5 ("Bluetooth: Fix BR/EDR out-of-band pairing with only initiator data")
Fixes: 33155c4aae ("Bluetooth: hci_event: Ignore NULL link key")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Syzbot reports a warning as follows:
WARNING: CPU: 1 PID: 26946 at net/bluetooth/hci_conn.c:619
hci_conn_timeout+0x122/0x210 net/bluetooth/hci_conn.c:619
...
Call Trace:
<TASK>
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
It is because the HCI_EV_SIMPLE_PAIR_COMPLETE event handler drops
hci_conn directly without check Simple Pairing whether be enabled. But
the Simple Pairing process can only be used if both sides have the
support enabled in the host stack.
Add hci_conn_ssp_enabled() for hci_conn in HCI_EV_IO_CAPA_REQUEST and
HCI_EV_SIMPLE_PAIR_COMPLETE event handlers to fix the problem.
Fixes: 0493684ed2 ("[Bluetooth] Disable disconnect timer during Simple Pairing")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This change is used to relieve CVE-2020-26555. The description of
the CVE:
Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]
The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]
It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.
A condition of this attack is that attacker should change the
BR_ADDR of his hacking device (Host B) to equal to the BR_ADDR with
the target device being attacked (Host A).
Thus, we reject the connection with device which has same BD_ADDR
both on HCI_Create_Connection and HCI_Connection_Request to prevent
the attack. A similar implementation also shows in btstack project.
[3][4]
Cc: stable@vger.kernel.org
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1]
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3523 [3]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L7297 [4]
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This change is used to relieve CVE-2020-26555. The description of the
CVE:
Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]
The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]
It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.
Thus, we can ignore null link key in the handler of "Link Key Notification
event" to relieve the attack. A similar implementation also shows in
btstack project. [3]
v3: Drop the connection when null link key be detected.
v2:
- Used Link: tag instead of Closes:
- Used bt_dev_dbg instead of BT_DBG
- Added Fixes: tag
Cc: stable@vger.kernel.org
Fixes: 55ed8ca10f ("Bluetooth: Implement link key handling for the management interface")
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1]
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3722 [3]
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves the hci_le_terminate_big_sync call from rx_work
to cmd_sync_work, to avoid calling sleeping function from
an invalid context.
Reported-by: syzbot+c715e1bd8dfbcb1ab176@syzkaller.appspotmail.com
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the case of a Periodic Synchronized Receiver,
the PA report received from a Broadcaster contains the BASE,
which has information about codec and other parameters of a BIG.
This isnformation is stored and the application can retrieve it
using getsockopt(BT_ISO_BASE).
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit implements defer setup support for the Broadcast Sink
scenario: By setting defer setup on a broadcast socket before calling
listen, the user is able to trigger the PA sync and BIG sync procedures
separately.
This is useful if the user first wants to synchronize to the periodic
advertising transmitted by a Broadcast Source, and trigger the BIG sync
procedure later on.
If defer setup is set, once a PA sync established event arrives, a new
hcon is created and notified to the ISO layer. A child socket associated
with the PA sync connection will be added to the accept queue of the
listening socket.
Once the accept call returns the fd for the PA sync child socket, the
user should call read on that fd. This will trigger the BIG create sync
procedure, and the PA sync socket will become a listening socket itself.
When the BIG sync established event is notified to the ISO layer, the
bis connections will be added to the accept queue of the PA sync parent.
The user should call accept on the PA sync socket to get the final bis
connections.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When user tries to connect a new CIS when its CIG is not configurable,
that connection shall fail, but pre-existing connections shall not be
affected. However, currently hci_cc_le_set_cig_params deletes all CIS
of the CIG on error so it doesn't work, even though controller shall not
change CIG/CIS configuration if the command fails.
Fix by failing on command error only the connections that are not yet
bound, so that we keep the previous CIS configuration like the
controller does.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces hci_conn_set_handle which takes care of verifying the
conditions where the hci_conn handle can be modified, including when
hci_conn_abort has been called and also checks that the handles is
valid as well.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI_MAX_AD_LENGTH shall only be used if the controller doesn't support
extended advertising, otherwise HCI_MAX_EXT_AD_LENGTH shall be used
instead.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some use cases require the user to be informed if BIG synchronization
fails. This commit makes it so that even if the BIG sync established
event arrives with error status, a new hconn is added for each BIS,
and the iso layer is notified about the failed connections.
Unsuccesful bis connections will be marked using the
HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event
is triggered on the newly allocated bis sockets, before adding them
to the accept list of the parent socket.
From user space, a new fd for each failed bis connection will be
obtained by calling accept. The user should check for the POLLERR
event on the new socket, to determine if the connection was successful
or not.
The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync
has been successfully established. This flag is checked at bis cleanup,
so the HCI LE BIG Terminate Sync command is only issued if needed.
The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called
for a listening socket, to avoid issuing the command everytime a BIGInfo
advertising report is received.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to always allocate a unique handle for connections so they
can be properly aborted by the likes of hci_abort_conn, so this uses the
invalid range as a pool of unset handles that way if userspace is trying
to create multiple connections at once each will be given a unique
handle which will be considered unset.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
