1
Commit Graph

296 Commits

Author SHA1 Message Date
Ben Hutchings
25f51b76f9 xhci-pci: Make xhci-pci-renesas a proper modular driver
If CONFIG_USB_XHCI_PCI_RENESAS is enabled, xhci-pci conditionally
calls into the xhci-pci-renesas module, which means both modules must
be loaded to use any xHCI PCI controller.

The MODULE_FIRMWARE declaration in the base xhci-pci module causes
initramfs-tools to check for and warn about missing firmware for the
Renesas xHCI controllers, when any xHCI PCI controller is present.
And because of the previous oddity, simply moving this declaration to
xhci-pci-renesas wouldn't help.

To fix this, reverse the relationship between the modules:

- Remove the quirk for the Renesas xHCIs, and the driver_data
  structure used only for them
- In xhci-pci:
  - Rename xhci_pci_probe() to xhci_pci_common_probe()
  - Export xhci_pci_common_probe() and xhci_pci_remove()
  - Use a new probe function that rejects the Renesas xHCIs and then
    calls the common probe function
- In xhci-pci-renesas:
  - Stop exporting renesas_xhci_check_request_fw()
  - Add a probe function that calls renesas_xhci_check_request_fw()
    followed by xhci_pci_common_probe()
  - Add and register a new pci_driver matching only the Renesas xHCIs
    and using its own probe function, but with other operations the
    same as in xhci-pci
- Make CONFIG_USB_XHCI_PCI_RENESAS depend on CONFIG_USB_XHCI_PCI,
  not the other way around

Finally, move the MODULE_FIRMWARE declaration to xhci-pci-renesas.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Cyril Brulebois <cyril@debamax.com>
Link: https://lore.kernel.org/r/ZqqfXYRJf7kGaqus@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07 12:51:38 +02:00
Niklas Schnelle
be3d5a493b usb: add HAS_IOPORT dependencies
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-37-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-29 15:28:34 +01:00
Uwe Kleine-König
213acadd21 usb: host: u132-hcd: Delete driver
This driver got its last actual change in 2006 and is probably unused as
nowbody should use a cardbus to USB adapter any more.

If it were still used, the driver was in urgent need for maintainer
love. (Explicit kref handling, underdocumented locking, .remove() can
return errors ...)

Also the link in the (now removed) help text doesn't look actively
maintained. According to archive.org it forwarded to
http://www.copenhagen-hotel.net/ already back in 2018.

So don't waste more time on this driver and just delete it.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230321103638.343886-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-21 14:06:11 +01:00
Linus Torvalds
72bffe7e1e USB / Thunderbolt driver changes for 6.3-rc1
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
 
 Nothing major in here, just lots of good development, including:
   - Thunderbolt additions for new device support and features
   - xhci driver updates and cleanups
   - USB gadget media driver updates (includes media core changes that
     were acked by the v4l2 maintainers)
   - lots of other USB gadget driver updates for new features
   - dwc3 driver updates and fixes
   - minor debugfs leak fixes
   - typec driver updates and additions
   - dt-bindings conversions to yaml
   - other small bugfixes and driver updates
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
 3o1IKOYqIMOx5E7zxn6W
 =7ajf
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.

  Nothing major in here, just lots of good development, including:

   - Thunderbolt additions for new device support and features

   - xhci driver updates and cleanups

   - USB gadget media driver updates (includes media core changes that
     were acked by the v4l2 maintainers)

   - lots of other USB gadget driver updates for new features

   - dwc3 driver updates and fixes

   - minor debugfs leak fixes

   - typec driver updates and additions

   - dt-bindings conversions to yaml

   - other small bugfixes and driver updates

  All have been in linux-next for a while with no reported issues"

* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
  usb: dwc3: xilinx: Remove unused of_gpio,h
  usb: typec: pd: Add higher capability sysfs for sink PDO
  usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
  usb: dwc3: pci: add support for the Intel Meteor Lake-M
  usb: gadget: u_ether: Don't warn in gether_setup_name_default()
  usb: gadget: u_ether: Convert prints to device prints
  usb: gadget: u_serial: Add null pointer check in gserial_resume
  usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
  xhci: host: potential NULL dereference in xhci_generic_plat_probe()
  dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
  usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
  of: device: Do not ignore error code in of_device_uevent_modalias
  of: device: Ignore modalias of reused nodes
  usb: gadget: configfs: Fix set but not used variable warning
  usb: gadget: uvc: Use custom strings if available
  usb: gadget: uvc: Allow linking function to string descs
  usb: gadget: uvc: Pick up custom string descriptor IDs
  usb: gadget: uvc: Allow linking XUs to string descriptors
  usb: gadget: configfs: Attach arbitrary strings to cdev
  usb: gadget: configfs: Support arbitrary string descriptors
  ...
2023-02-24 12:07:00 -08:00
Christoph Hellwig
4f6dfc2136 usb: remove the dead USB_OHCI_SH option
USB_OHCI_SH is a dummy option that never builds any code, remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230113062339.1909087-3-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-03 08:25:30 +01:00
Arnd Bergmann
ec5499d338 xhci: split out rcar/rz support from xhci-plat.c
The USB_XHCI_RZV2M and USB_RENESAS_USB3 select other drivers
based on the enabled SoC types, which leads to build failures
when the dependencies are not met:

WARNING: unmet direct dependencies detected for USB_RZV2M_USB3DRD
  Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=n] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y])
  Selected by [m]:
  - USB_XHCI_RZV2M [=m] && USB_SUPPORT [=y] && USB [=y] && USB_XHCI_HCD [=m] && USB_XHCI_PLATFORM [=m] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y])
ERROR: modpost: "rzv2m_usb3drd_reset" [drivers/usb/host/xhci-plat-hcd.ko] undefined!

The xhci-rcar driver has a reverse dependency with the xhci core, and it
depends on the UDC driver in turn. To untangle this, make the xhci-rcar.ko
driver a standalone module that just calls into the xhci-plat.ko module
like other drivers do.

This allows handling the dependency on the USB_RZV2M_USB3DRD driver to
only affect the xhci-rcar module and simplify the xhci-plat module.

It also allows leaving out the hacks for broken dma mask and nested
devices from the rcar side and keep that only in the generic xhci driver.

As a future cleanup, the marvell and dwc3 specific bits of xhci-plat.c
could be moved out as well, but that is not required for this bugfix.

Fixes: c52c9acc41 ("xhci: host: Add Renesas RZ/V2M SoC support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230131150531.12347-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02 11:12:59 +01:00
Biju Das
c52c9acc41 xhci: host: Add Renesas RZ/V2M SoC support
RZ/V2M is similar to R-Car XHCI but it doesn't require any
firmware, we need to reset the USB Host reset release in DRD Module
before accessing host registers.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230121145853.4792-10-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25 15:48:17 +01:00
Arnd Bergmann
1ea35b3557 ARM: s3c: remove s3c24xx specific hacks
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16 09:26:05 +01:00
Arnd Bergmann
0d7bb85e94 ARM: omap1: remove unused board files
All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are supported in
qemu.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12 10:53:11 +01:00
Arnd Bergmann
e73307b9eb ARM: cns3xxx: remove entire platform
cns3xxx was marked as unused a while ago, and gets removed
entirely now.

Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:26 +01:00
Linus Walleij
1dd33a9f1b usb: fotg210: Collect pieces of dual mode controller
The Faraday FOTG210 is a dual-mode OTG USB controller that can
act as host, peripheral or both. To be able to probe from one
hardware description and to follow the pattern of other dual-
mode controllers such as MUSB or MTU3 we need to collect the
two, currently completely separate drivers in the same
directory.

After this, users need to select the main symbol USB_FOTG210
and then each respective subdriver. We pave the road to
compile both drivers into the same kernel and select the
one we want to use at probe() time, and possibly add OTG
support in the end.

This patch doesn't do much more than create the new symbol
and collect the drivers in one place. We also add a comment
for the section of dual-mode controllers in the Kconfig
file so people can see what these selections are about.

Also add myself as maintainer as there has been little
response on my patches to these drivers.

Cc: Fabian Vogt <fabian@ritter-vogt.de>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09 12:38:09 +01:00
Colin Ian King
4e74b483a3 USB: host: Kconfig: Fix spelling mistake "firwmare" -> "firmware"
There is a spelling mistake in a Kconfig description. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221007203210.2756505-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22 13:21:55 +02:00
Tomer Maimon
b6caf79d21 USB: host: npcm: Add NPCM8XX support
Modify NPCM USB EHCI host controller configuration to support all NPCM
BMC SoC.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20220718181842.61040-4-tmaimon77@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19 11:03:30 +02:00
Artur Bujdoso
9dbdac024d staging: octeon-usb: move driver out of staging
The Octeon usb driver has been in staging for a long time and used in
Ubiquiti routers for a while now.
It's been built and then tested on real hardware with several usb devices
and it is proven to be stable and ready to be moved to its proper place
in the kernel tree.

Move it to drivers/usb/host and adjust its Makefile, Kconfig and defconfig
dependencies.

Many thanks to the developers who made it happen.

Signed-off-by: Artur Bujdoso <artur.bujdoso@gmail.com>
Link: https://lore.kernel.org/r/Yo0HBIlSXOBM+//9@crux
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21 16:43:37 +02:00
Arnd Bergmann
11e002924d usb: omap: avoid mach/*.h headers
The omap usb drivers still rely on mach/*.h headers that
are explicitly or implicitly included, but all the required
definitions are now in include/linux/soc/ti/, so use those
instead and allow compile-testing on other architectures.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21 15:01:32 +02:00
Juergen Gross
494ed3997d usb: Introduce Xen pvUSB frontend (xen hcd)
Introduces the Xen pvUSB frontend. With pvUSB it is possible for a Xen
domU to communicate with a USB device assigned to that domU. The
communication is all done via the pvUSB backend in a driver domain
(usually Dom0) which is owner of the physical device.

The pvUSB frontend is a USB hcd for a virtual USB host connector.

The code is taken from the pvUSB implementation in Xen done by Fujitsu
based on Linux kernel 2.6.18.

Changes from the original version are:
- port to upstream kernel
- put all code in just one source file
- move module to appropriate location in kernel tree
- adapt to Linux style guide
- minor code modifications to increase readability

Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211123132048.5335-3-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13 14:58:32 +01:00
Krzysztof Kozlowski
2abc865706 usb: exynos: describe driver in KConfig
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210924133005.111564-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05 12:55:50 +02:00
Lukas Bulwahn
b2582996a7 usb: host: remove dead EHCI support for on-chip PMC MSP71xx USB controller
Commit 1b00767fd8 ("MIPS: Remove PMC MSP71xx platform") deletes
./arch/mips/pmcs-msp71xx/Kconfig, including its config  MSP_HAS_USB.

Hence, since then, the corresponding EHCI support for on-chip PMC MSP71xx
USB controller is dead code. Remove this dead driver.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210818071137.22711-2-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-18 15:32:19 +02:00
Dmitry Osipenko
0b9828763a usb: host: ehci-tegra: Select USB_GADGET Kconfig option
Select USB_GADGET Kconfig option in order to fix build failure which
happens because ChipIdea driver has a build dependency on both USB_GADGET
and USB_EHCI_HCD, while USB_EHCI_TEGRA force-selects the ChipIdea driver
without taking into account the tristate USB_GADGET dependency. It's not
possible to do anything about the cyclic dependency of the Kconfig
options, but USB_EHCI_TEGRA is now a deprecated option that isn't used
by defconfigs and USB_GADGET is wanted on Tegra by default, hence it's
okay to have a bit clunky workaround for it.

Fixes: c3590c7656 ("usb: host: ehci-tegra: Remove the driver")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210320151915.7566-2-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23 12:37:31 +01:00
Dmitry Osipenko
c3590c7656 usb: host: ehci-tegra: Remove the driver
The ChipIdea driver now provides USB2 host mode support for NVIDIA Tegra
SoCs. The ehci-tegra driver is obsolete now, remove it and redirect the
older Kconfig entry to the CI driver.

Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-9-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13 11:26:34 +01:00
Fabio Estevam
e7018751d2 usb: host: ehci-mxc: Remove the driver
The ehci-mxc driver was only used by i.MX non-DT platforms.

Since 5.10-rc1, i.MX has been converted to a DT-only platform and all
board files are gone.

Remove the ehci-mxc driver as there are no more users at all.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201113171231.2205-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-14 00:28:16 +01:00
Fabio Estevam
e625f3dede usb: host: imx21-hcd: Remove the driver
Since commit 4b563a0666 ("ARM: imx: Remove imx21 support") the imx21
SoC is no longer supported.

Get rid of its USB driver too, which is now unused.

Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201109210813.21382-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13 15:22:46 +01:00
Colin Ian King
cda37dbbf1 usb: xhci: fix spelling mistake in Kconfig "firwmare" -> "firmware"
There are two spelling mistakes in the Kconfig text. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200618093224.10179-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18 16:03:46 +02:00
Masahiro Yamada
a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Vinod Koul
df00731cff usb: xhci: fix USB_XHCI_PCI depends
The xhci-pci-renesas module exports symbols for xhci-pci to load the
RAM/ROM on renesas xhci controllers. We had dependency which works
when both the modules are builtin or modules.

But if xhci-pci is inbuilt and xhci-pci-renesas in module, we get below
linker error:
drivers/usb/host/xhci-pci.o: In function `xhci_pci_remove':
drivers/usb/host/xhci-pci.c:411: undefined reference to `renesas_xhci_pci_exit'
drivers/usb/host/xhci-pci.o: In function `xhci_pci_probe':
drivers/usb/host/xhci-pci.c:345: undefined reference to `renesas_xhci_check_request_fw'

Fix this by adding USB_XHCI_PCI having depends on USB_XHCI_PCI_RENESAS
|| !USB_XHCI_PCI_RENESAS so that both can be either inbuilt or modules.

Reported-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: a66d21d7db ("usb: xhci: Add support for Renesas controller with memory")
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200519050622.994908-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19 08:26:31 +02:00
Christian Lamparter
8bd5741e31 usb: renesas-xhci: Add the renesas xhci driver
This add a new driver for renesas xhci which is basically a firmware
loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will
invoke this driver for loading/unloading on relevant devices.

This patch adds a firmware loader for the uPD720201K8-711-BAC-A
and uPD720202K8-711-BAA-A variant. Both of these chips are listed
in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
devices which need the firmware loader on page 2 in order to
work as they "do not support the External ROM".

The "Firmware Download Sequence" is describe in chapter
"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.

The firmware "K2013080.mem" is available from a USB3.0 Host to
PCIe Adapter (PP2U-E card) "Firmware download" archive. An
alternative version can be sourced from Netgear's WNDR4700 GPL
archives.

The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
(2012-06-15) state that the firmware is for the following devices:
 - uPD720201 ES 2.0 sample whose revision ID is 2.
 - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
 - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.

[vkoul: fixed comments:
	used macros for timeout count and delay
	removed renesas_fw_alive_check
	cleaned renesas_fw_callback
	removed recursion for renesas_fw_download
	add register defines and field names
	move to a separate file
	make fw loader as sync probe so that we execute in probe and
        prevent race
	make xhci-pci-renesas a seprate module]

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15 15:44:35 +02:00
Al Cooper
c33f4f24b8 usb: host: Add ability to build new Broadcom STB USB drivers
Add the build system changes needed to get the Broadcom STB XHCI,
EHCI and OHCI functionality working. The OHCI support does not
require anything unique to Broadcom so the standard ohci-platform
driver is being used. Also update MAINTAINERS.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200512150019.25903-6-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13 14:29:09 +02:00
Krzysztof Kozlowski
dea7b202bd usb: exynos: Rename Samsung and Exynos to lowercase
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.

"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names.  Therefore they should be written with lowercase letters starting
with capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200104152107.11407-9-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09 10:53:38 +01:00
Krzysztof Kozlowski
4e52af1cca usb: host: Do not compile test deprecated USB_OCTEON_EHCI
The USB_OCTEON_EHCI is deprecated and only selects proper driver so
there is no need to compile test it.  Since it selects
USB_EHCI_BIG_ENDIAN_MMIO it causes compilation failures on certain big
endian architectures (e.g. m68k):

    In file included from drivers/usb/host/ehci-mxc.c:19:0:
    drivers/usb/host/ehci.h: In function ‘ehci_readl’:
    drivers/usb/host/ehci.h:743:3: error:
        implicit declaration of function ‘readl_be’ [-Werror=implicit-function-declaration]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1577778392-570-1-git-send-email-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31 09:26:18 +01:00
Krzysztof Kozlowski
88eaaecc44 usb: host: Enable compile testing for some of drivers
Some of the USB host drivers can be compile tested to increase build
coverage.  Add 'if' conditional to 'default y' so they will not get
enabled by default on all other architectures.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191230172215.17370-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30 20:27:51 +01:00
Krzysztof Kozlowski
2f8b6e9a2b usb: host: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191121132910.29310-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21 14:39:39 +01:00
Krzysztof Kozlowski
c2c1c66b5d usb: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190923154956.6868-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04 14:09:41 +02:00
Linus Torvalds
c6b48dad92 USB changes for 5.4-rc1
Here is the big set of USB patches for 5.4-rc1.
 
 Two major chunks of code are moving out of the tree and into the staging
 directory, uwb and wusb (wireless USB support), because there are no
 devices that actually use this protocol anymore, and what we have today
 probably doesn't work at all given that the maintainers left many many
 years ago.  So move it to staging where it will be removed in a few
 releases if no one screams.
 
 Other than that, lots of little things.  The usual gadget and xhci and
 usb serial driver updates, along with a bunch of sysfs file cleanups due
 to the driver core changes to support that.  Nothing really major, just
 constant forward progress.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIYYQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymn8ACfTi8Y2ku/yqw8Nvs4vQjc08MUDhgAoNnbhsI6
 H3HUrZTjJJzuxHCM22Lh
 =8ZRm
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big set of USB patches for 5.4-rc1.

  Two major chunks of code are moving out of the tree and into the
  staging directory, uwb and wusb (wireless USB support), because there
  are no devices that actually use this protocol anymore, and what we
  have today probably doesn't work at all given that the maintainers
  left many many years ago. So move it to staging where it will be
  removed in a few releases if no one screams.

  Other than that, lots of little things. The usual gadget and xhci and
  usb serial driver updates, along with a bunch of sysfs file cleanups
  due to the driver core changes to support that. Nothing really major,
  just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: usbcore: Fix slab-out-of-bounds bug during device reset
  usb: cdns3: Remove redundant dev_err call in cdns3_probe()
  USB: rio500: Fix lockdep violation
  USB: rio500: simplify locking
  usb: mtu3: register a USB Role Switch for dual role mode
  usb: common: add USB GPIO based connection detection driver
  usb: common: create Kconfig file
  usb: roles: get usb-role-switch from parent
  usb: roles: Add fwnode_usb_role_switch_get() function
  device connection: Add fwnode_connection_find_match()
  usb: roles: Introduce stubs for the exiting functions in role.h
  dt-bindings: usb: mtu3: add properties about USB Role Switch
  dt-bindings: usb: add binding for USB GPIO based connection detection driver
  dt-bindings: connector: add optional properties for Type-B
  dt-binding: usb: add usb-role-switch property
  usbip: Implement SG support to vhci-hcd and stub driver
  usb: roles: intel: Enable static DRD mode for role switch
  xhci-ext-caps.c: Add property to disable Intel SW switch
  usb: dwc3: remove generic PHY calibrate() calls
  usb: core: phy: add support for PHY calibration
  ...
2019-09-18 10:33:46 -07:00
Arnd Bergmann
23565baece usb: ohci-nxp: enable compile-testing
The driver hardcodes a hardware I/O address the way one should
generally not do, and this prevents both compile-testing, and
moving the platform to CONFIG_ARCH_MULTIPLATFORM.

Change the code to be independent of the machine headers
to allow those two. Removing the hardcoded address would
be hard and is not necessary, so leave that in place for now.

Link: https://lore.kernel.org/r/20190809144043.476786-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15 21:32:56 +02:00
Arnd Bergmann
a190d94830 usb: remove ehci-w90x900 driver
The ARM w90x900 platform is getting removed, so this driver is obsolete.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190809202749.742267-16-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-10 09:28:28 +02:00
Greg Kroah-Hartman
71ed79b0e4 USB: Move wusbcore and UWB to staging as it is obsolete
The UWB and wusbcore code is long obsolete, so let us just move the code
out of the real part of the kernel and into the drivers/staging/
location with plans to remove it entirely in a few releases.

Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08 07:52:01 +02:00
Mauro Carvalho Chehab
ecefae6db0 docs: usb: rename files to .rst and add them to drivers-api
While there are a mix of things here, most of the stuff
were written from Kernel developer's PoV. So, add them to
the driver-api book.

A follow up for this patch would be to move documents from
there that are specific to sysadmins, adding them to the
admin-guide.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20 14:28:36 +02:00
Bartlomiej Zolnierkiewicz
d991f855cb usb: remove redundant 'default n' from Kconfig-s
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:06:22 +02:00
Ofer Heifetz
12453a897e usb: host: xhci: mvebu: add reset on resume quirk
The mvebu xHCI host driver does not have suspend/resume support. Use of
the XHCI_RESET_ON_RESUME quirk is mandatory in order to avoid failures
after resume. This will work only if no USB device is plugged-in.

While at it, mention in the Kconfig file that this IP is also present
on the A3700 SoC.

Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[miquel.raynal@bootlin.com: Reword the commit message]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30 09:22:35 +01:00
Greg Kroah-Hartman
cae8dc3b68 USB: add missing SPDX lines to Kconfig and Makefiles
There are a few remaining drivers/usb/ files that do not have SPDX
identifiers in them, all of these are either Kconfig or Makefiles.  Add
the correct GPL-2.0 identifier to them to make scanning tools happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 09:08:17 +01:00
Ran Wang
73855109a9 usb: kconfig: remove dependency FSL_SOC for ehci fsl driver
CONFIG_USB_EHCI_FSL is not dependent on FSL_SOC, it can be built on
non-PPC platforms.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18 10:02:09 +01:00
Lubomir Rintel
0440fa3d1b USB: EHCI: make ehci-mv a separate driver
This is done do that it could be enabled alongside other platform EHCI
glue drivers on multiplatform kernels.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:07:55 +02:00
Avi Fishman
df44831ee2 USB host: Add USB ehci support for nuvoton npcm7xx platform
This patch adds support for ehci controller for the Nuvoton
npcm7xx platform.
Most of the code was taken from ehci-spear.c + specific initialization
code

Signed-off-by: Avi Fishman <AviFishman70@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25 21:59:15 +08:00
Jianguo Sun
c508f41da0 xhci: hisilicon: support HiSilicon STB xHCI host controller
This commit adds support for HiSilicon STB xHCI host controller.
There are two xHCI host controllers on HiSilicon STB SoCs. Each
one requires additional configuration before exposing interface
compliant with xHCI.

Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24 18:03:07 +02:00
Dmitry Osipenko
ee30ec0cba usb: phy: Add Kconfig entry for Tegra PHY driver
Tegra's EHCI driver has a build dependency on Tegra's PHY driver and
currently Tegra's PHY driver is built only when Tegra's EHCI driver is
built. Add own Kconfig entry for the Tegra's PHY driver so that drivers
other than ehci-tegra (like ChipIdea UDC) could work with ehci-tegra
driver being disabled in kernels config by allowing user to manually
select the PHY driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:50:57 +02:00
Linus Torvalds
ac9053d2dc USB/PHY patches for 4.17-rc1
Here is the big set of USB and PHY driver patches for 4.17-rc1.
 
 Lots of USB typeC work happened this round, with code moving from the
 staging directory into the "real" part of the kernel, as well as new
 infrastructure being added to be able to handle the different types of
 "roles" that typeC requires.
 
 There is also the normal huge set of USB gadget controller and driver
 updates, along with XHCI changes, and a raft of other tiny fixes all
 over the USB tree.  And the PHY driver updates are merged in here as
 well as they interacted with the USB drivers in some places.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSpJw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylGawCdED2xS3HUxOIqfh81d8B1py8ji04AoJXdLAsH
 JgwXbdbibZBabYTVi5s5
 =LrRH
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 4.17-rc1.

  Lots of USB typeC work happened this round, with code moving from the
  staging directory into the "real" part of the kernel, as well as new
  infrastructure being added to be able to handle the different types of
  "roles" that typeC requires.

  There is also the normal huge set of USB gadget controller and driver
  updates, along with XHCI changes, and a raft of other tiny fixes all
  over the USB tree. And the PHY driver updates are merged in here as
  well as they interacted with the USB drivers in some places.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
  Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
  usb: musb: gadget: misplaced out of bounds check
  usb: chipidea: imx: Fix ULPI on imx53
  usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
  usb: chipidea: usbmisc: small clean up
  usb: chipidea: usbmisc: evdo can be set e/o reset
  usb: chipidea: usbmisc: evdo is only specific to OTG port
  USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
  usb: dwc3: gadget: never call ->complete() from ->ep_queue()
  usb: gadget: udc: core: update usb_ep_queue() documentation
  usb: host: Remove the deprecated ATH79 USB host config options
  usb: roles: Fix return value check in intel_xhci_usb_probe()
  USB: gadget: f_midi: fixing a possible double-free in f_midi
  usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
  usb: core: Copy parameter string correctly and remove superfluous null check
  USB: announce bcdDevice as well as idVendor, idProduct.
  USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
  usb: hub: Reduce warning to notice on power loss
  USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
  USB: serial: cp210x: add ELDAT Easywave RX09 id
  ...
2018-04-04 17:55:35 -07:00
Arnd Bergmann
da2827a298 usb: isp1362: remove blackfin arch glue
The blackfin architecture is getting removed, and this is the last
remaining architecture specific setting, so the various hacks
can be removed now.

From all I can tell, there are no remaining in-tree users of the
driver, but it could be used by out-of-tree platform ports.
I've marked the driver as 'depends on COMPILE_TEST', short of
removing it outright.

It was originally written for some ARM PXA machines using the same
chip, but that platform never really worked and the code has been
removed a long time ago.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:57:14 +02:00
Alban Bedel
53d473fc1e usb: host: Remove the deprecated ATH79 USB host config options
The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
generic EHCI and OHCI platform drivers, and have been marked as
deprecated since 2012.

These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
still get enabled for the EHCI driver. This is now done be selecting
this option when the EHCI platform driver is enabled on the ATH79
platform.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-26 11:59:25 +02:00
James Hogan
ec897569ad
usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and
USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is
conditional upon USB && USB_SUPPORT, so that it can be freely selected
by platform Kconfig symbols in architecture code.

For example once the MIPS_GENERIC platform selects are fixed in commit
2e6522c565 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS
32r6_defconfig warns like so:

warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB)
warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB)

Fixes: 2e6522c565 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-mips@linux-mips.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patchwork: https://patchwork.linux-mips.org/patch/18559/
2018-02-15 21:29:13 +00:00
Lu Baolu
dfba2174dc usb: xhci: Add DbC support in xHCI driver
xHCI compatible USB host controllers(i.e. super-speed USB3 controllers)
can be implemented with the Debug Capability(DbC). It presents a debug
device which is fully compliant with the USB framework and provides the
equivalent of a very high performance full-duplex serial link. The debug
capability operation model and registers interface are defined in 7.6.8
of the xHCI specification, revision 1.1.

The DbC debug device shares a root port with the xHCI host. By default,
the debug capability is disabled and the root port is assigned to xHCI.
When the DbC is enabled, the root port will be assigned to the DbC debug
device, and the xHCI sees nothing on this port. This implementation uses
a sysfs node named <dbc> under the xHCI device to manage the enabling
and disabling of the debug capability.

When the debug capability is enabled, it will present a debug device
through the debug port. This debug device is fully compliant with the
USB3 framework, and it can be enumerated by a debug host on the other
end of the USB link. As soon as the debug device is configured, a TTY
serial device named /dev/ttyDBC0 will be created.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08 17:43:52 +01:00