In support of this I also add a struct msi_msg that captures the the two
address and one data field ina typical msi message, and I remember the pos and
if the address is 64bit in struct msi_desc.
This makes the code a little more readable and easier to maintain, and paves
the way to further simplfications.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently move_native_irq disables and renables the irq we are migrating to
ensure we don't take that irq when we are actually doing the migration
operation. Disabling the irq needs to happen but sometimes doing the work is
move_native_irq is too late.
On x86 with ioapics the irq move sequences needs to be:
edge_triggered:
mask irq.
move irq.
unmask irq.
ack irq.
level_triggered:
mask irq.
ack irq.
move irq.
unmask irq.
We can easily perform the edge triggered sequence, with the current defintion
of move_native_irq. However the level triggered case does not map well. For
that I have added move_masked_irq, to allow me to disable the irqs around both
the ack and the move.
Q: Why have we not seen this problem earlier?
A: The only symptom I have been able to reproduce is that if we change
the vector before acknowleding an irq the wrong irq is acknowledged.
Since we currently are not reprogramming the irq vector during
migration no problems show up.
We have to mask the irq before we acknowledge the irq or else we could
hit a window where an irq is asserted just before we acknowledge it.
Edge triggered irqs do not have this problem because acknowledgements
do not propogate in the same way.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The primary aim of this patchset is to remove maintenances problems caused by
the irq infrastructure. The two big issues I address are an artificially
small cap on the number of irqs, and that MSI assumes vector == irq. My
primary focus is on x86_64 but I have touched other architectures where
necessary to keep them from breaking.
- To increase the number of irqs I modify the code to look at the (cpu,
vector) pair instead of just looking at the vector.
With a large number of irqs available systems with a large irq count no
longer need to compress their irq numbers to fit. Removing a lot of brittle
special cases.
For acpi guys the result is that irq == gsi.
- Addressing the fact that MSI assumes irq == vector takes a few more
patches. But suffice it to say when I am done none of the generic irq code
even knows what a vector is.
In quick testing on a large Unisys x86_64 machine we stumbled over at least
one driver that assumed that NR_IRQS could always fit into an 8 bit number.
This driver is clearly buggy today. But this has become a class of bugs that
it is now much easier to hit.
This patch:
This is a minor space optimization. In practice I don't think this has any
affect because of our alignment constraints and the other fields but there is
not point in chewing up an uncessary word and since we already read the flag
field this should improve the cache hit ratio of the irq handler.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts all the i386 PIC controllers (except VisWS and Voyager,
which I could not test - but which should still work as old-style IRQ layers)
to the new and simpler irq-chip interrupt handling layer.
[akpm@osdl.org: build fix]
[mingo@elte.hu: enable fasteoi handler for i386 level-triggered IO-APIC irqs]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts all the x86_64 PIC controllers layers to the new and
simpler irq-chip interrupt handling layer.
[mingo@elte.hu: The patch also enables the fasteoi handler for x86_64]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
make headers_check fails on linux/nfsd/const.h.
Since linux/sunrpc/msg_prot.h does not seem to export anything interesting
for userspace, this patch moves it in the __KERNEL__ protected section.
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use all the pieces set up so far to implement referral support, allowing
return of NFS4ERR_MOVED and fs_locations attribute.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Encode fs_locations attribute.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define FS locations structures, some functions to manipulate them, and add
code to parse FS locations in downcall and add to the exports structure.
[bfields@fieldses.org: bunch of fixes and cleanups]
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Store the export path in the svc_export structure instead of storing only the
dentry. This will prevent the need for additional d_path calls to provide
NFSv4 fs_locations support.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Both the (recently introduces) nsm_sema and the older f_sema are converted
over.
Cc: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The NFSACL patches introduced support for multiple RPC services listening on
the same transport. However, only the first of these services was registered
with portmapper. This was perfectly fine for nfsacl, as you traditionally do
not want these to show up in a portmapper listing.
The patch below changes the default behavior to always register all services
listening on a given transport, but retains the old behavior for nfsacl
services.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Every NLM call includes the client's NSM state. Currently, the Linux client
always reports 0 - which seems not to cause any problems, but is not what the
protocol says.
This patch exposes the kernel's internal variable to user space via a sysctl,
which can be set at system boot time by statd.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When we send a GRANTED_MSG call, we current copy the NLM cookie provided in
the original LOCK call - because in 1996, some broken clients seemed to rely
on this bug. However, this means the cookies are not unique, so that when the
client's GRANTED_RES message comes back, we cannot simply match it based on
the cookie, but have to use the client's IP address in addition. Which breaks
when you have a multi-homed NFS client.
The X/Open spec explicitly mentions that clients should not expect the same
cookie; so one may hope that any clients that were broken in 1996 have either
been fixed or rendered obsolete.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The way we incremented the NLM cookie in nlmclnt_next_cookie was not thread
safe. This patch changes the counter to an atomic_t
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds the nsm_use_hostnames sysctl and module param. If set, lockd
will use the client's name (as given in the NLM arguments) to find the NSM
handle. This makes recovery work when the NFS peer is multi-homed, and the
reboot notification arrives from a different IP than the original lock calls.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As a result of previous patches, the loop in nlmsvc_invalidate_all just sets
h_expires for all client/hosts to 0 (though does it in a very complicated
way).
This was possibly meant to trigger early garbage collection but half the time
'0' is in the future and so it infact delays garbage collection.
Pre-aging the 'hosts' is not really needed at this point anyway so we throw
out the loop and nlm_find_client which is no longer needed.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes nlm_traverse{locks,blocks,shares} and friends use a function
pointer rather than a "action" enum.
This function pointer is given two nlm_hosts (one given by the caller, the
other taken from the lock/block/share currently visited), and is free to do
with them as it wants. If it returns a non-zero value, the lockd/block/share
is released.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes struct nlm_file and the nlm_files hash table to use a hlist
instead of the home-grown lists.
This allows us to remove f_hash which was only used to find the right hash
chain to delete an entry from.
It also increases the size of the nlm_files hash table from 32 to 128.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes the nlm_blocked list to use a list_node instead of
homegrown linked list handling.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Get rid of the home-grown singly linked lists for the nlm_host hash table.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This converts the statd upcalls to use the nsm_handle
This means that we only register each host once with statd, rather than
registering each host/vers/protocol triple.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes the SM_NOTIFY handling understand and use the nsm_handle.
To make it a bit clear what is happening:
nlmclent_prepare_reclaim and nlmclnt_finish_reclaim
get open-coded into 'reclaimer'
The result is tidied up.
Then some of that functionality is moved out into nlm_host_rebooted (which
calls nlmclnt_recovery which starts a thread which runs reclaimer).
Also host_rebooted now finds an nsm_handle rather than a host, then then
iterates over all hosts and deals with each host that shares that nsm_handle.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces the nsm_handle, which is shared by all nlm_host objects
referring to the same client.
With this patch applied, all nlm_hosts from the same address will share the
same nsm_handle. A future patch will add sharing by name.
Note: this patch changes h_name so that it is no longer guaranteed to be an IP
address of the host. When the host represents an NFS server, h_name will be
the name passed in the mount call. When the host represents a client, h_name
will be the name presented in the lock request received from the client. A
h_name is only used for printing informational messages, this change should
not be significant.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds the peer's hostname (and name length) to all calls to
nlm*_lookup_host functions. A subsequent patch will make use of these (is
requested by a sysctl).
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Common code from nlm4svc_proc_sm_notify and nlmsvc_proc_sm_notify is moved
into a new nlm_host_rebooted.
This is in preparation of a patch that will change the reboot notification
handling entirely.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Speed up high call-rate workloads by caching the struct ip_map for the peer on
the connected struct svc_sock instead of looking it up in the ip_map cache
hashtable on every call. This helps workloads using AUTH_SYS authentication
over TCP.
Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16
synthetic client threads simulating an rsync (i.e. recursive directory
listing) workload reading from an i386 RH9 install image (161480 regular files
in 10841 directories) on the server. That tree is small enough to fill in the
server's RAM so no disk traffic was involved. This setup gives a sustained
call rate in excess of 60000 calls/sec before being CPU-bound on the server.
Profiling showed strcmp(), called from ip_map_match(), was taking 4.8% of each
CPU, and ip_map_lookup() was taking 2.9%. This patch drops both contribution
into the profile noise.
Note that the above result overstates this value of this patch for most
workloads. The synthetic clients are all using separate IP addresses, so
there are 64 entries in the ip_map cache hash. Because the kernel measured
contained the bug fixed in commit
commit 1f1e030bf7
and was running on 64bit little-endian machine, probably all of those 64
entries were on a single chain, thus increasing the cost of ip_map_lookup().
With a modern kernel you would need more clients to see the same amount of
performance improvement. This patch has helped to scale knfsd to handle a
deployment with 2000 NFS clients.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The max possible is the maximum RPC payload. The default depends on amount of
total memory.
The value can be set within reason as long as no nfsd threads are currently
running. The value can also be ready, allowing the default to be determined
after nfsd has started.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The limit over UDP remains at 32K. Also, make some of the apparently
arbitrary sizing constants clearer.
The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of
the rqstp. This allows it to be different for different protocols (udp/tcp)
and also allows it to depend on the servers declared sv_bufsiz.
Note that we don't actually increase sv_bufsz for nfs yet. That comes next.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
.. by allocating the array of 'kvec' in 'struct svc_rqst'.
As we plan to increase RPCSVC_MAXPAGES from 8 upto 256, we can no longer
allocate an array of this size on the stack. So we allocate it in 'struct
svc_rqst'.
However svc_rqst contains (indirectly) an array of the same type and size
(actually several, but they are in a union). So rather than waste space, we
move those arrays out of the separately allocated union and into svc_rqst to
share with the kvec moved out of svc_tcp_recvfrom (various arrays are used at
different times, so there is no conflict).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We are planning to increase RPCSVC_MAXPAGES from about 8 to about 256. This
means we need to be a bit careful about arrays of size RPCSVC_MAXPAGES.
struct svc_rqst contains two such arrays. However the there are never more
that RPCSVC_MAXPAGES pages in the two arrays together, so only one array is
needed.
The two arrays are for the pages holding the request, and the pages holding
the reply. Instead of two arrays, we can simply keep an index into where the
first reply page is.
This patch also removes a number of small inline functions that probably
server to obscure what is going on rather than clarify it, and opencode the
needed functionality.
Also remove the 'rq_restailpage' variable as it is *always* 0. i.e. if the
response 'xdr' structure has a non-empty tail it is always in the same pages
as the head.
check counters are initilised and incr properly
check for consistant usage of ++ etc
maybe extra some inlines for common approach
general review
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Magnus Maatta <novell@kiruna.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Driver for TI Flash Media card reader. At present, only MMC/SD cards are
supported.
[akpm@osdl.org: cleanups, build fixes]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Cc: Daniel Qarras <dqarras@yahoo.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix paren-placement / precedence bug breaking initialization for 1 MHz
clock mode.
Also fix comment spelling error, and fence-post (off-by-one) error on
symbol used in request_region.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=7242
Thanks alexander.krause@erazor-zone.de, dzpost@dedekind.net, for the
reports and patch test, and phelps@mantara.com for the independent patch
and verification.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: <alexander.krause@erazor-zone.de>
Cc: <dzpost@dedekind.net>
Cc: <phelps@mantara.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- rename ____kmalloc to kmalloc_track_caller so that people have a chance
to guess what it does just from it's name. Add a comment describing it
for those who don't. Also move it after kmalloc in slab.h so people get
less confused when they are just looking for kmalloc - move things around
in slab.c a little to reduce the ifdef mess.
[penberg@cs.helsinki.fi: Fix up reversed #ifdef]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We were pretending to use the GENERIC_ISA_DMA routines, but never
selected that symbol. Since ISA DMA is known to not work right now,
just remove the attempts to acquire the dma_spin_lock to fix compile
warnings.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
We can compile at least one IDE driver that refers to this. We can't
use the asm-generic file because we have our own definitions of
pcibios_resource_to_bus etc.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
iounmap's argument needs to be both const and volatile, otherwise we'll
get warnings that we're discarding pointer qualifiers
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Pull out struct sba_device and struct lba_device into a
common ropes.h header. Also fold the parisc portion of
iosapic.h into this file. (Then delete the useless portion
of iosapic.h)
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Our prior mode of operation didn't allow nested interrupts
because it makes the interrupt code much simpler. However,
nested interrupts are better for latency.
This code uses the EIEM register to simulate level interrupts
and thus achieve nesting.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Use the __raw_spin_lock_flags routine so we can take an interrupt while
spinning. This re-fixes a bug jejb found on 2005-10-20:
CPU0 does a flush_tlb_all holding the vmlist_lock for write.
CPU1 tries a cat of /proc/meminfo which tries to acquire vmlist_lock for read
CPU1 is now spinning with interrupts disabled
CPU0 tries to execute a smp_call_function to flush the local tlb caches
This is now a deadlock because CPU1 is spinning with interrupts disabled and
can never receive the IPI
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This isn't likely to be causing problems for other bits of
kernel code. I can't find any other user of CONFIG_HZ outside
of arch specific code.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Rewrite rwlock implementation to avoid various deadlocks in the current
scheme.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Russell King pointed out that asm/serial.h is anachronistic and we were
misusing BASE_BAUD. So fix BASE_BAUD for PCI 16550 UARTs, move LASI_BASE_BAUD
into 8250_gsc, and fix the obsolete comment about reserving serial port slots.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Stop using PER_LINUX32 to designate processes needing
compaterizing. Convert is_compat_task to use TIF_32BIT and
set TIF_32BIT in binfmt_elf32.c
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
This patch fixes the pa8800 at a gross level (there are still other
subtle incoherency issues which can still cause crashes and HPMCs).
What it does is try to force eject inequivalent aliases before they
become visible to the L2 cache (which is where we get the incoherence
problems).
A new function (parisc_requires_coherency) is introduced in
asm/processor.h to identify the pa8x00 processors (8800 and 8900)
which have the issue.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Add header for McKinley bus related code. Remove extern decl
of proc_mckinley_root in drivers/parisc/sba_iommu.c
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Abstract existing shift register left macros as shift register
right are. This lends itself to a nice clean up of some #ifdef
blocks in entry.S
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
It seems PA7200 processors also suppress traps on loads to
%r0. This means we can prefetch for read on these cpus. Of course,
we can't support prefetch for write, since that requires
LOAD DOUBLEWORD which was added with PA2.0
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
asm/processor.h on parisc wants spinlocks for cpuinfo, but
linux/spinlock_types.h needs lockdep, and lockdep wants prefetch.
This leads to a horrible circular dependancy, because <asm/processor.h>
is including something which depends on things which are not defined
until the end of the file.
Kludge around this by moving prefetch related code into <asm/prefetch.h>
and including it before <linux/spinlock_types.h>, however this is just
a temporary solution until this mess can be cleaned up.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Hi,
This patch adds a new type for 3rd party module use and cleans up a deprecated
message type.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:
http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt
The patch provides only single family support (i.e. inner family =
outer family).
Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com>
Signed-off-by: Miika Komu <miika@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Abhinav Pathak <abhinav.pathak@hiit.fi>
Signed-off-by: Jeff Ahrenholz <ahrenholz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following patch adds or/and/xor functionality for the mark target,
while staying backwards compatible.
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
By adding a type parameter to ip_route_me_harder() the
expensive call to inet_addr_type() can be avoided in some cases.
A followup patch where ip_route_me_harder() is called from within
ip_vs_out() is one such example.
Signed-off-By: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
My patch to make the early xmon logic work with earlier early param
parsing (480f6f35a1) breaks xmon=off.
No one does this obviously as xmon rocks, but it should really work
as documented.
While fixing that it struck me that we could move the xmon param
handling into xmon.c, and also consolidate the
xmon_init()/do_early_xmon logic into xmon_setup(). This means
xmon=early drops into xmon a little earlier on 32-bit, but it
seems to work just fine.
Tested on PSERIES and CLASSIC32.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
For some reason we have two prototypes for xmon_init(), remove the
one in system.h.
No one calls xmon() anymore, debugger() is preferable, so we don't
need the prototype. And similarly no one calls xmon_printf().
Also update the include guards on xmon.h to match the standard
format, add copyright and license, and add comments to #endifs.
Built for pseries_defconfig and pmac32_defconfig.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This allows numaq to properly align cpus to their given node during
boot. Pass logical apicid to apicid_to_node and allow the summit
sub-arch to use physical apicid (hard_smp_processor_id()).
Tested against numaq and summit based systems with no issues.
Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (39 commits)
Add missing maintainer countries in CREDITS
Fix bytes <-> kilobytes typo in Kconfig for ramdisk
fix a typo in Documentation/pi-futex.txt
BUG_ON conversion for fs/xfs/
BUG_ON() conversion in fs/nfsd/
BUG_ON conversion for fs/reiserfs
BUG_ON cleanups in arch/i386
BUG_ON cleanup in drivers/net/tokenring/
BUG_ON cleanup for drivers/md/
kerneldoc-typo in led-class.c
debugfs: spelling fix
rcutorture: Fix incorrect description of default for nreaders parameter
parport: Remove space in function calls
Michal Wronski: update contact info
Spelling fix: "control" instead of "cotrol"
reboot parameter in Documentation/kernel-parameters.txt
Fix copy&waste bug in comment in scripts/kernel-doc
remove duplicate "until" from kernel/workqueue.c
ite_gpio fix tabbage
fix file specification in comments
...
Fixed trivial path conflicts due to removed files:
arch/mips/dec/boot/decstation.c, drivers/char/ite_gpio.c
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME.
[MIPS] DECstation defconfig update
[MIPS] Fix size of zones_size and zholes_size array
[MIPS] BCM1480: Mask pending interrupts against c0_status.im.
[MIPS] SB1250: Interrupt handler fixes
[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.
[MIPS] Remove Atlas and SEAD from feature-removal-schedule.
[MIPS] Remove Jaguar and Ocelot family from feature list.
[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems
[MIPS] Remove dead DECstation boot code
[MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundary
VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls are meant
to be used to provide better support for webcams. Currently, it is not yet
used on kernel drivers.
Better to keep it marked as experimental, until we have several kernel drivers
supporting those features.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
A generic change to cards to allow any board to specify whether
it needs the wm8775 module loaded (by the core) or not.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
As per feature-removal-schedule.txt.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
It was obesrved that at least one older PCI card predating the
requirement for the TRDY signal to respond within 16 clock ticks actually
does not meet this rule nor even the power-on defaults of the PCI bridges
found in development systems built around the Broadcom SiByte SOCs. Here
is a patch that bumps up the timeout to the highest finite value supported
by these chips, which is 255 clock ticks. The bridges affected are the
SiByte SOC itself and the SP1011.
This change does not effectively affect systems only having PCI option
cards installed that meet the TRDY requirement of the current PCI spec.
The rule was introduced with PCI 2.1, so any older card may make the
system affected. If this is the case, performance of the system will
suffer in return for the card working at all. If this is a concern, then
the solution is not to use such cards.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
The stack pointer in MIPS/gcc should always 8 bytes aligned on
entry to any routines. Therefore pt_regs structure must be
aligned to 8-byte boundary too.
Instead of creating dummy fields to achieve this alignment, this
patch let gcc doing it. Therefore 'smtc_pad' field can be safely
removed.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support
[ARM] 3880/1: remove the last trace of iop31x support
[ARM] 3879/1: ep93xx: instantiate platform devices for ep93xx ethernet
[ARM] 3809/3: get rid of 4 megabyte kernel image size limit
[ARM] Fix XIP_KERNEL build error in arch/arm/mm/mmu.c
[ARM] 3874/1: Remove leftover usage of asm/timeofday.h
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fixup __raw_read_trylock().
sh: Kill off remaining config.h references.
sh: Initial gitignore list
sh: build fixes for defconfigs.
sh: Kill off more dead headers.
sh: Set pclk default for SH7705.
sh: defconfig updates.
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Update defconfig.
[SPARC64]: Do not include compat.h from asm-sparc64/signal.h any more.
[SPARC64]: Move signal compat bits to new header file.
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits)
[POWERPC] Fix rheap alignment problem
[POWERPC] Use check_legacy_ioport() for ISAPnP
[POWERPC] Avoid NULL pointer in gpio1_interrupt
[POWERPC] Enable generic rtc hook for the MPC8349 mITX
[POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot
[POWERPC] fix spin lock nesting in hvc_iseries
[POWERPC] EEH failure to mark pci slot as frozen.
[POWERPC] update powerpc defconfig files after libata kconfig breakage
[POWERPC] enable sysrq in pmac32_defconfig
[POWERPC] UPIO_TSI cleanup
[POWERPC] rewrite mkprep and mkbugboot in sane C
[POWERPC] maple/pci iomem annotations
[POWERPC] powerpc oprofile __user annotations
[POWERPC] cell spufs iomem annotations
[POWERPC] NULL noise removal: spufs
[POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c
[POWERPC] update mpc8349_itx_defconfig and remove some debug settings
[POWERPC] Always call cede in pseries dedicated idle loop
[POWERPC] Fix loop logic in irq_alloc_virt()
...
check pr_debug() arguments
When DEBUG isn't defined pr_debug() is defined away as an empty macro. By
throwing away the arguments we allow completely incorrect code to build.
Instead let's make it an empty inline which checks arguments and mark it so gcc
can check the format specification.
This results in a seemingly insignificant code size increase. A x86-64
allyesconfig:
text data bss dec hex filename
25354768 7191098 4854720 37400586 23ab00a vmlinux.before
25354945 7191138 4854720 37400803 23ab0e3 vmlinux
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Once upon a time we needed to fixed limit to the number of md devices,
probably because we preallocated some array. This need no longer exists, but
we still have an arbitrary limit.
So remove MAX_MD_DEVS and allow as many devices as we can fit into the 'minor'
part of a device number.
Also remove some useless noise at init time (which reports MAX_MD_DEVS) and
remove MD_THREAD_NAME_MAX which hasn't been used for a while.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It is equivalent to conf->raid_disks - conf->mddev->degraded.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a new sysfs interface that allows the bitmap of an array to be dirtied.
The interface is write-only, and is used as follows:
echo "1000" > /sys/block/md2/md/bitmap
(dirty the bit for chunk 1000 [offset 0] in the in-memory and on-disk
bitmaps of array md2)
echo "1000-2000" > /sys/block/md1/md/bitmap
(dirty the bits for chunks 1000-2000 in md1's bitmap)
This is useful, for example, in cluster environments where you may need to
combine two disjoint bitmaps into one (following a server failure, after a
secondary server has taken over the array). By combining the bitmaps on
the two servers, a full resync can be avoided (This was discussed on the
list back on March 18, 2005, "[PATCH 1/2] md bitmap bug fixes" thread).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It isn't needed as mddev->degraded contains equivalent info.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
They are not needed. conf->failed_disks is the same as mddev->degraded and
conf->working_disks is conf->raid_disks - mddev->degraded.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Instead of magic numbers (0,1,2,3) in sb_dirty, we have
some flags instead:
MD_CHANGE_DEVS
Some device state has changed requiring superblock update
on all devices.
MD_CHANGE_CLEAN
The array has transitions from 'clean' to 'dirty' or back,
requiring a superblock update on active devices, but possibly
not on spares
MD_CHANGE_PENDING
A superblock update is underway.
We wait for an update to complete by waiting for all flags to be clear. A
flag can be set at any time, even during an update, without risk that the
change will be lost.
Stop exporting md_update_sb - isn't needed.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch contains the scheduled removal of the START_ARRAY ioctl for md.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds support for a per-target dm_flush_fn method. This is needed
to allow dm-loop to invalidate page cache mappings in response to BLKFLSBUF
ioctl commands.
Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Separate the setting of device I/O limits from dm_get_device(). dm-loop will
use this.
Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds a target preresume hook.
It is called before the targets are resumed and if it returns an error the
resume gets cancelled.
The crypt target will use this to indicate that it is unable to process I/O
because no encryption key has been supplied.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Export blkdev_driver_ioctl for device-mapper.
If we get as far as the device-mapper ioctl handler, we know the ioctl is not
a standard block layer BLK* one, so we don't need to check for them a second
time and can call blkdev_driver_ioctl() directly.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Extend the core device-mapper infrastructure to accept arbitrary ioctls on a
mapped device provided that it has exactly one target and it is capable of
supporting ioctls.
[We can't use unlocked_ioctl because we need 'inode': 'file' might be NULL.
Is it worth changing this?]
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Arnd Bergmann <arnd@arndb.de> wrote:
> Am Wednesday 21 June 2006 21:31 schrieb Alasdair G Kergon:
> > static struct block_device_operations dm_blk_dops = {
> > .open = dm_blk_open,
> > .release = dm_blk_close,
> > +.ioctl = dm_blk_ioctl,
> > .getgeo = dm_blk_getgeo,
> > .owner = THIS_MODULE
>
> I guess this also needs a ->compat_ioctl method, otherwise it won't
> work for ioctl numbers that have a compat_ioctl implementation in the
> low-level device driver.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Remove 24/32bit unused support (the chips don't do 24/32bit anyway)
- Clean up printk obfuscation
- Clean up lispitus in the if(())()) stuff
- Minor tidying
No functionality changes, may have a crack at hardware scrolling based
on my X driver once the cleanups are in.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds proper prototypes to header files for three console init
functions used on drivers/char/vt.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check the return value of device_create_file(). If return is 'fail', remove
attributes by calling device_remove_file().
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adds functionality to read the EDID information over the DDC bus in a generic
way. This code is based on the DDC implementation in the radeon driver.
[adaplas]
- separate from fbmon.c and place in new file fb_ddc.c
- remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature
will not compile if i2c support is compiled as a module
- feature is selectable only by drivers needing it. It must have a
'select FB_DDC if xxx' in Kconfig
- change printk's to dev_*, the i2c people prefers it
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Michal Miroslaw reported a problem (bugzilla #7023) where a user initiated
reset while the IDE layer was already resetting the channel caused a crash,
and provided a rough fix.
This is a slightly cleaner version of the fix which tracks the reset state
and blocks further reset requests while a reset is in progress.
Note this is not a security issue - random end users can't access the
ioctl in question anyway.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove dma_base2 field from ide_hwif_t as it's used only in 2 drivers and
without great need.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: John Keller <jpk@sgi.com>
Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make IDE_HWIFS configurable if EMBEDDED
This lets us lop as much as 16k off an x86 build. It's a little ugly, but
it's dead simple. Note the fix for HWIFS < 2.
Sizing interfaces dynamically unfortunately turns out to be pretty
major surgery.
add/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182)
function old new delta
ide_hwifs 16920 1692 -15228
init_irq 1113 750 -363
ideprobe_init 283 138 -145
ide_pci_setup_ports 1329 1193 -136
save_match 85 - -85
ide_register_hw_with_fixup 367 287 -80
ide_setup 1364 1308 -56
is_chipset_set 40 4 -36
create_proc_ide_interfaces 225 205 -20
init_ide_data 84 67 -17
ide_probe_for_cmd640x 1198 1183 -15
ide_unregister 1452 1451 -1
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Claim extra DMA I/O ports regardless of what IDE channels are
present/enabled.
- Remove extra ports handling from ide_mapped_mmio_dma() since it's not
applicable to the custom-mapping IDE drivers.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Up to now sched group's cpu_power for each sched domain is initialized
independently. This made the setup code ugly as the new sched domains are
getting added.
Make the sched group cpu_power setup code generic, by using domain child
field and new domain flag in sched_domain. For most of the sched
domains(except NUMA), sched group's cpu_power is now computed generically
using the domain properties of itself and of the child domain.
sched groups in NUMA domains are setup little differently and hence they
don't use this generic mechanism.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce the child field in sched_domain struct and use it in
sched_balance_self().
We will also use this field in cleaning up the sched group cpu_power
setup(done in a different patch) code.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The last change for partport_pc did fix the common case for all PowerMacs,
but it broke the case for PCI multiport IO cards. In fact, the config
option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed
the parport driver. It enables the winbond and smsc probing.
Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will
take care of it. All powerpc configs should have
CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp
boards we tested it on.
Tested on a G4/466 with a PCI card:
0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd Unknown device 5079
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at f2000800 [size=32]
Region 2: I/O ports at f2000870 [size=8]
Region 3: I/O ports at f2000860 [size=8]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add kernel-doc function headers in kernel/dma.c and use it in DocBook.
Clean up kernel-doc in mca_dma.h (the colon (':') represents a
section header).
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some uses of kallsyms_lookup() do not need to find out the name of a symbol
and its module's name it belongs. This is specially true in arch specific
code, which needs to unwind the stack to show the back trace during oops
(mips is an example). In this specific case, we just need to retreive the
function's size and the offset of the active intruction inside it.
Adds a new entry "kallsyms_lookup_size_offset()" This new entry does
exactly the same as kallsyms_lookup() but does not require any buffers to
store any names.
It returns 0 if it fails otherwise 1.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system. They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example. The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.
Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.
This patch:
Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.
The stat functions then returns the full 64-bit inode number where
available and where possible. If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.
Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.
Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.
Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.
It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.
[akpm: alpha build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make the pid.h macros look less revolting in an 80-col window.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generic__raw_read_trylock() was broken, fix up the __raw_read_trylock()
implementation for something sensible. Taken from m32r, which has the
same use cases.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
It's not needed, now that all of that stuff is now in
asm/compat_signal.h, and it breaks the build too :-)
Signed-off-by: David S. Miller <davem@davemloft.net>
Create asm-sparc64/compat_signal.h and stuff things there.
This avoids the "linux/compat.h includes asm/signal.h but
asm/signal.h needs compat_sigset_t which isn't defined yet"
problems introduced recently.
Signed-off-by: David S. Miller <davem@davemloft.net>
Duh. I screwed up editing David Howells patch in commit
3f2e05e90e, and the actual declaration for
the sigset_from_compat() function went missing. My bad.
Olaf Hering saved the day and noticed that I'm a moron.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add watchdog support for Philips PNX4008 ARM board inlined.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Update GFS2 in the light of David Howells' patch:
[PATCH] BLOCK: Move common FS-specific ioctls to linux/fs.h [try #6]
36695673b0
which calls the filesystem independant flags FS_..._FL. As a result
we no longer need the flags.h file and the conversion routine is
moved into the GFS2 source code.
Userland programs which used to include iflags.h should now include
fs.h and use the new flag names.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* git://git.infradead.org/mtd-2.6:
[MTD] Cleanup of 'ioremap balanced with iounmap for drivers/mtd subsystem'
[MTD] fix nftl_write warning
[MTD] fix printk warning
[MTD ONENAND] Check OneNAND lock scheme & all block unlock command support
[MTD ONENAND] Remove unused MTD_ONENAND_SYNC_READ configuration
[MTD ONENAND] Fix OneNAND probe
[MTD NAND] Provide prototype for newly-exported nand_wait_ready()
[MTD] Remove #ifndef __KERNEL__ hack in <mtd/mtd-abi.h>
[MTD NAND] Allow override of page read and write functions.
[MTD NAND] Allocate chip->buffers separately to allow it to be overridden
[MTD NAND] Split nand_scan() into two parts; allow board driver to intervene
[MTD NAND] Export nand_wait_ready() for use by board drivers
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
Input: wistron - add support for Acer TravelMate 2424NWXCi
Input: wistron - fix setting up special buttons
Input: add KEY_BLUETOOTH and KEY_WLAN definitions
Input: add new BUS_VIRTUAL bus type
Input: add driver for stowaway serial keyboards
Input: make input_register_handler() return error codes
Input: remove cruft that was needed for transition to sysfs
Input: fix input module refcounting
Input: constify input core
Input: libps2 - rearrange exports
Input: atkbd - support Microsoft Natural Elite Pro keyboards
Input: i8042 - disable MUX mode on Toshiba Equium A110
Input: i8042 - get rid of polling timer
Input: send key up events at disconnect
Input: constify psmouse driver
Input: i8042 - add Amoi to the MUX blacklist
Input: logips2pp - add sugnature 56 (Cordless MouseMan Wheel), cleanup
Input: add driver for Touchwin serial touchscreens
Input: add driver for Touchright serial touchscreens
Input: add driver for Penmount serial touchscreens
...
Revert Andrew Morton's patch to temporarily hack around the lack of a
declaration of sigset_t in linux/compat.h to make the block-disablement
patches build on IA64. This got accidentally pushed to Linus and should
be fixed in a different manner.
Also make linux/compat.h #include asm/signal.h to gain a definition of
sigset_t so that it can externally declare sigset_from_compat().
This has been compile-tested for i386, x86_64, ia64, mips, mips64, frv, ppc and
ppc64 and run-tested on frv.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There are a few places in the kernel where the init task is signaled. The
ctrl+alt+del sequence is one them. It kills a task, usually init, using a
cached pid (cad_pid).
This patch replaces the pid_t by a struct pid to avoid pid wrap around
problem. The struct pid is initialized at boot time in init() and can be
modified through systctl with
/proc/sys/kernel/cad_pid
[ I haven't found any distro using it ? ]
It also introduces a small helper routine kill_cad_pid() which is used
where it seemed ok to use cad_pid instead of pid 1.
[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
proc_pid_make_inode:
ei->pid = get_pid(task_pid(task));
I think this is not safe. get_pid() can be preempted after checking "pid
!= NULL". Then the task exits, does detach_pid(), and RCU frees the pid.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move execve() into arch/avr32/kernel/sys_avr32.c, rename it to
kernel_execve() and return the syscall return value directly without
setting errno.
This also gets rid of the __KERNEL_SYSCALLS__ stuff from unistd.h and
expands #ifdef __KERNEL__ to cover everything in unistd.h except the
__NR_foo definitions.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The last in-kernel user of errno is gone, so we should remove the definition
and everything referring to it. This also removes the now-unused lib/execve.c
file that was introduced earlier.
Also remove every trace of __KERNEL_SYSCALLS__ that still remained in the
kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some architectures provide an execve function that does not set errno, but
instead returns the result code directly. Rename these to kernel_execve to
get the right semantics there. Moreover, there is no reasone for any of these
architectures to still provide __KERNEL_SYSCALLS__ or _syscallN macros, so
remove these right away.
[akpm@osdl.org: build fix]
[bunk@stusta.de: build fix]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch set allows to unshare IPCs and have a private set of IPC objects
(sem, shm, msg) inside namespace. Basically, it is another building block of
containers functionality.
This patch implements core IPC namespace changes:
- ipc_namespace structure
- new config option CONFIG_IPC_NS
- adds CLONE_NEWIPC flag
- unshare support
[clg@fr.ibm.com: small fix for unshare of ipc namespace]
[akpm@osdl.org: build fix]
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement a CLONE_NEWUTS flag, and use it at clone and sys_unshare.
[clg@fr.ibm.com: IPC unshare fix]
[bunk@stusta.de: cleanup]
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The system_utsname isn't needed now that kernel/sysctl.c is fixed.
Nuke it.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch defines the uts namespace and some manipulators.
Adds the uts namespace to task_struct, and initializes a
system-wide init namespace.
It leaves a #define for system_utsname so sysctl will compile.
This define will be removed in a separate patch.
[akpm@osdl.org: build fix, cleanup]
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use. This patch replaces those with a the init_utsname
helper.
Changes: Removed several uses of init_utsname(). Hope I picked all the
right ones in net/ipv4/ipconfig.c. These are now changed to
utsname() (the per-process namespace utsname) in the previous
patch (2/7)
[akpm@osdl.org: CIFS fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace references to system_utsname to the per-process uts namespace
where appropriate. This includes things like uname.
Changes: Per Eric Biederman's comments, use the per-process uts namespace
for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c
[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define utsname() and init_utsname() which return &system_utsname. Users of
system_utsname will be changed to use these helpers, after which
system_utsname will disappear.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This moves the mount namespace into the nsproxy. The mount namespace count
now refers to the number of nsproxies point to it, rather than the number of
tasks. As a result, the unshare_namespace() function in kernel/fork.c no
longer checks whether it is being shared.
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds a nsproxy structure to the task struct. Later patches will
move the fs namespace pointer into this structure, and introduce a new utsname
namespace into the nsproxy.
The vserver and openvz functionality, then, would be implemented in large part
by virtualizing/isolating more and more resources into namespaces, each
contained in the nsproxy.
[akpm@osdl.org: build fix]
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Actually implement multiple pools. On NUMA machines, allocate a svc_pool per
NUMA node; on SMP a svc_pool per CPU; otherwise a single global pool. Enqueue
sockets on the svc_pool corresponding to the CPU on which the socket bh is run
(i.e. the NIC interrupt CPU). Threads have their cpu mask set to limit them
to the CPUs in the svc_pool that owns them.
This is the patch that allows an Altix to scale NFS traffic linearly
beyond 4 CPUs and 4 NICs.
Incorporates changes and feedback from Neil Brown, Trond Myklebust, and
Christoph Hellwig.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently knfsd keeps its own list of all nfsd threads in nfssvc.c; add a new
way of managing the list of all threads in a svc_serv. Add
svc_create_pooled() to allow creation of a svc_serv whose threads are managed
by the sunrpc code. Add svc_set_num_threads() to manage the number of threads
in a service, either per-pool or globally across the service.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
add svc_get() for those occasions when we need to temporarily bump up
svc_serv->sv_nrthreads as a pseudo refcount.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Split out the list of idle threads and pending sockets from svc_serv into a
new svc_pool structure, and allocate a fixed number (in this patch, 1) of
pools per svc_serv. The new structure contains a lock which takes over
several of the duties of svc_serv->sv_lock, which is now relegated to
protecting only sv_tempsocks, sv_permsocks, and sv_tmpcnt in svc_serv.
The point is to move the hottest fields out of svc_serv and into svc_pool,
allowing a following patch to arrange for a svc_pool per NUMA node or per CPU.
This is a major step towards making the NFS server NUMA-friendly.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Convert the svc_sock->sk_reserved variable from an int protected by
svc_serv->sv_lock, to an atomic. This reduces (by 1) the number of places we
need to take the (effectively global) svc_serv->sv_lock.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Protect the svc_sock->sk_deferred list with a new lock svc_sock->sk_defer_lock
instead of svc_serv->sv_lock. Using the more fine-grained lock reduces the
number of places we need to take the svc_serv lock.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Convert the svc_sock->sk_inuse counter from an int protected by
svc_serv->sv_lock, to an atomic. This reduces the number of places we need to
take the (effectively global) svc_serv->sv_lock.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Following are 11 patches from Greg Banks which combine to make knfsd more
Numa-aware. They reduce hitting on 'global' data structures, and create some
data-structures that can be node-local.
knfsd threads are bound to a particular node, and the thread to handle a new
request is chosen from the threads that are attach to the node that received
the interrupt.
The distribution of threads across nodes can be controlled by a new file in
the 'nfsd' filesystem, though the default approach of an even spread is
probably fine for most sites.
Some (old) numbers that show the efficacy of these patches: N == number of
NICs == number of CPUs == nmber of clients. Number of NUMA nodes == N/2
N Throughput, MiB/s CPU usage, % (max=N*100)
Before After Before After
--- ------ ---- ----- -----
4 312 435 350 228
6 500 656 501 418
8 562 804 690 589
This patch:
Move the aging of RPC/TCP connection sockets from the main svc_recv() loop to
a timer which uses a mark-and-sweep algorithm every 6 minutes. This reduces
the amount of work that needs to be done in the main RPC loop and the length
of time we need to hold the (effectively global) svc_serv->sv_lock.
[akpm@osdl.org: cleanup]
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It isn't needed as it is available in rqstp->rq_server, and dropping it allows
some local vars to be dropped.
[akpm@osdl.org: build fix]
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Userspace should create and bind a socket (but not connectted) and write the
'fd' to portlist. This will cause the nfs server to listen on that socket.
To close a socket, the name of the socket - as read from 'portlist' can be
written to 'portlist' with a preceding '-'.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This file will list all ports that nfsd has open.
Default when TCP enabled will be
ipv4 udp 0.0.0.0 2049
ipv4 tcp 0.0.0.0 2049
Later, the list of ports will be settable.
'portlist' chosen rather than 'ports', to avoid unnecessary confusion with
non-mainline patches which created 'ports' with different semantics.
[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We have an array 'nfsd_version' which lists the available versions of nfsd,
and 'nfsd_versions' (poor choice there :-() which lists the currently active
versions.
Then we have a bitmap - nfsd_versbits which says which versions are wanted.
The bits in this bitset cause content to be copied from nfsd_version to
nfsd_versions when nfsd starts.
This patch removes nfsd_versbits and moves information directly from
nfsd_version to nfsd_versions when requests for version changes arrive.
Note that this doesn't make it possible to change versions while the server is
running. This is because serv->sv_xdrsize is calculated when a service is
created, and used when threads are created, and xdrsize depends on the active
versions.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently lockd listens on UDP always, and TCP if CONFIG_NFSD_TCP is set.
However as lockd performs services of the client as well, this is a problem.
If CONFIG_NfSD_TCP is not set, and a tcp mount is used, the server will not be
able to call back to lockd.
So:
- add an option to lockd_up saying which protocol is needed
- Always open sockets for which an explicit port was given, otherwise
only open a socket of the type required
- Change nfsd to do one lockd_up per socket rather than one per thread.
This
- removes the dependancy on CONFIG_NFSD_TCP
- means that lockd may open sockets other than at startup
- means that lockd will *not* listen on UDP if the only
mounts are TCP mount (and nfsd hasn't started).
The latter is the only one that concerns me at all - I don't know if this
might be a problem with some servers.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nfsd has some cleanup that it wants to do when the last thread exits, and
there will shortly be some more. So collect this all into one place and
define a callback for an rpc service to call when the service is about to be
destroyed.
[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kprobe_flush_task() possibly calls kfree function during holding
kretprobe_lock spinlock, if kfree function is probed by kretprobe that will
incur spinlock deadlock. This patch moves kfree function out scope of
kretprobe_lock.
Signed-off-by: bibo, mao <bibo.mao@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add the regs_return_value() macro to extract the return value in an
architecture agnostic manner, given the pt_regs.
Other architecture maintainers may want to add similar helpers.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kallsyms_lookup_name() allows for <module:symbol> style specification for
looking up symbol addresses. Handle the case where the user specifies
<module:.symbol> on powerpc, given that 64-bit powerpc uses function
descriptors.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In an effort to make kprobe modules more portable, here is a patch that:
o Introduces the "symbol_name" field to struct kprobe.
The symbol->address resolution now happens in the kernel in an
architecture agnostic manner. 64-bit powerpc users no longer have
to specify the ".symbols"
o Introduces the "offset" field to struct kprobe to allow a user to
specify an offset into a symbol.
o The legacy mechanism of specifying the kprobe.addr is still supported.
However, if both the kprobe.addr and kprobe.symbol_name are specified,
probe registration fails with an -EINVAL.
o The symbol resolution code uses kallsyms_lookup_name(). So
CONFIG_KPROBES now depends on CONFIG_KALLSYMS
o Apparantly kprobe modules were the only legitimate out-of-tree user of
the kallsyms_lookup_name() EXPORT. Now that the symbol resolution
happens in-kernel, remove the EXPORT as suggested by Christoph Hellwig
o Modify tcp_probe.c that uses the kprobe interface so as to make it
work on multiple platforms (in its earlier form, the code wouldn't
work, say, on powerpc)
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The problem with remembering a user space process by its pid is that it is
possible that the process will exit, pid wrap around will occur.
Converting to a struct pid avoid that problem, and paves the way for
implementing a pid namespace.
Also since usb is the only user of kill_proc_info_as_uid rename
kill_proc_info_as_uid to kill_pid_info_as_uid and have the new version take
a struct pid.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define a per-container pid space object. And create one instance of this
object, init_pspace, to define the entire pid space. Subsequent patches
will provide/use interfaces to create/destroy pid spaces.
Its a subset/rework of Eric Biederman's patch
http://lkml.org/lkml/2006/2/6/285 .
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move struct pidmap and PIDMAP_ENTRIES to a new file, include/linux/pspace.h
where it will be used in subsequent patches to define pid spaces.
Its a subset of Eric Biederman's patch http://lkml.org/lkml/2006/2/6/285
[akpm@osdl.org: cleanups]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I think it is hardly possible to read the current do_each_task_pid(). The
new version is much simpler and makes the code smaller.
Only the do_each_task_pid change is tested, the do_each_pid_task isn't.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As part of an SMP cleanliness pass over UML, I consted a bunch of
structures in order to not have to document their locking. One of these
structures was a struct tty_operations. In order to const it in UML
without introducing compiler complaints, the declaration of
tty_set_operations needs to be changed, and then all of its callers need to
be fixed.
This patch declares all struct tty_operations in the tree as const. In all
cases, they are static and used only as input to tty_set_operations. As an
extra check, I ran an i386 allyesconfig build which produced no extra
warnings.
53 drivers are affected. I checked the history of a bunch of them, and in
most cases, there have been only a handful of maintenance changes in the
last six months. serial_core.c was the busiest one that I looked at.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
File handles can be requested to send sigio and sigurg to processes. By
tracking the destination processes using struct pid instead of pid_t we make
the interface safe from all potential pid wrap around problems.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I took a good hard look at the locking and it appears the locking on vt_pid
is the console semaphore. Every modified path is called under the console
semaphore except reset_vc when it is called from fn_SAK or do_SAK both of
which appear to be in interrupt context. In addition I need to be careful
because in the presence of an oops the console_sem may be arbitrarily
dropped.
Which leads me to conclude the current locking is inadequate for my needs.
Given the weird cases we could hit because of oops printing instead of
introducing an extra spin lock to protect the data and keep the pid to
signal and the signal to send in sync, I have opted to use xchg on just the
struct pid * pointer instead.
Due to console_sem we will stay in sync between vt_pid and vt_mode except
for a small window during a SAK, or oops handling. SAK handling should
kill any user space process that care, and oops handling we are broken
anyway. Besides the worst that can happen is that I try to send the wrong
signal.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is such a rare path it took me a while to figure out how to test
this after soring out the locking.
This patch does several things.
- The variables used are moved into a structure and declared in vt_kern.h
- A spinlock is added so we don't have SMP races updating the values.
- Instead of raw pid_t value a struct_pid is used to guard against
pid wrap around issues, if the daemon to spawn a new console dies.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As we stop storing pid_t's and move to storing struct pid *. We need a way to
get the pid_t from the struct pid to report to user space what we have stored.
Having a clean well defined way to do this is especially important as we move
to multiple pid spaces as may need to report a different value to the caller
depending on which pid space the caller is in.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently the signal functions all either take a task or a pid_t argument.
This patch implements variants that take a struct pid *. After all of the
users have been update it is my intention to remove the variants that take a
pid_t as using pid_t can be more work (an extra hash table lookup) and
difficult to get right in the presence of multiple pid namespaces.
There are two kinds of functions introduced in this patch. The are the
general use functions kill_pgrp and kill_pid which take a priv argument that
is ultimately used to create the appropriate siginfo information, Then there
are _kill_pgrp_info, kill_pgrp_info, kill_pid_info the internal implementation
helpers that take an explicit siginfo.
The distinction is made because filling out an explcit siginfo is tricky, and
will be even more tricky when pid namespaces are introduced.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To avoid pid rollover confusion the kernel needs to work with struct pid *
instead of pid_t. Currently there is not an iterator that walks through all
of the tasks of a given pid type starting with a struct pid. This prevents us
replacing some pid_t instances with struct pid. So this patch adds
do_each_pid_task which walks through the set of task for a given pid type
starting with a struct pid.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the last round of cleaning up the pid hash table a more general struct pid
was introduced, that can be referenced counted.
With the more general struct pid most if not all places where we store a pid_t
we can now store a struct pid * and remove the need for a hash table lookup,
and avoid any possible problems with pid roll over.
Looking forward to the pid namespaces struct pid * gives us an absolute form a
pid so we can compare and use them without caring which pid namespace we are
in.
This patchset introduces the infrastructure needed to use struct pid instead
of pid_t, and then it goes on to convert two different kernel users that
currently store a pid_t value.
There are a lot more places to go but this is enough to get the basic idea.
Before we can merge a pid namespace patch all of the kernel pid_t users need
to be examined. Those that deal with user space processes need to be
converted to using a struct pid *. Those that deal with kernel processes need
to converted to using the kthread api. A rare few that only use their current
processes pid values get to be left alone.
This patch:
task_session returns the struct pid of a tasks session.
task_pgrp returns the struct pid of a tasks process group.
task_tgid returns the struct pid of a tasks thread group.
task_pid returns the struct pid of a tasks process id.
These can be used to avoid unnecessary hash table lookups, and to implement
safe pid comparisions in the face of a pid namespace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently proc_pident_lookup gets the names and types from a table and then
has a huge switch statement to get the inode and file operations it needs.
That is silly and is becoming increasingly hard to maintain so I just put all
of the information in the table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When listing loaded modules during an oops or panic, also list each
module's Tainted flags if non-zero (P: Proprietary or F: Forced load only).
If a module is did not taint the kernel, it is just listed like
usbcore
but if it did taint the kernel, it is listed like
wizmodem(PF)
Example:
[ 3260.121718] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
[ 3260.121729] [<ffffffff8804c099>] :dump_test:proc_dump_test+0x99/0xc8
[ 3260.121742] PGD fe8d067 PUD 264a6067 PMD 0
[ 3260.121748] Oops: 0002 [1] SMP
[ 3260.121753] CPU 1
[ 3260.121756] Modules linked in: dump_test(P) snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device ide_cd generic ohci1394 snd_hda_intel snd_hda_codec snd_pcm snd_timer snd ieee1394 snd_page_alloc piix ide_core arcmsr aic79xx scsi_transport_spi usblp
[ 3260.121785] Pid: 5556, comm: bash Tainted: P 2.6.18-git10 #1
[Alternatively, I can look into listing tainted flags with 'lsmod',
but that won't help in oopsen/panics so much.]
[akpm@osdl.org: cleanup]
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modules using the genpool allocator need to be able to destroy the data
structure when unloading.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add the ability to have pxafb use only certain fixed video modes
(selected on a per platform basis). This is useful on production
hardware such as the Zaurus cxx00 models where the valid modes are
known in advance and any other modes could result in hardware damage.
Following this, add support for the cxx00 QVGA mode. Mode information
is passed to the lcd_power call to allowing the panel drivers to
configure the display hardware accordingly (corgi_lcd already contains
the functionality for the cxx00 panel).
This mirrors the setup already used by w100fb.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Honor alignment parameter in the rheap allocator. This is needed by
qe_lib.
Remove compile warning.
Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Kumar Galak <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Add powerpc get/set_rtc_time interface to new generic rtc class. This
abstracts rtc chip specific code from the platform code for rtc-over-i2c
platforms. Specific RTC chip support is now configured under
Device Drivers -> Real Time Clock. Setting time of day from the RTC
on startup is also configurable.
this time without the potentially platform breaking initcall.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the PC was ret_from_irq or ret_from_exception, there will be no
more normal stackframe. Instead of stopping the unwinding, use PC and
RA saved by an exception handler to continue unwinding into the
interrupted context. This also simplifies the CONFIG_STACKTRACE code.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement stacktrace interface by using unwind_stack() and enable lockdep
support in Kconfig.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In handle_sys and its variants, we must reload some registers which
might be clobbered by trace_hardirqs_on().
Also we must make sure trace_hardirqs_on() called in kernel level (not
exception level).
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make sysrq-K work on serial console by passing in the tty.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
A serial card might have been removed when the system is resumed.
This results in a suspended port being shut down, which results in
the ports shutdown method being called twice in a row. This causes
BUGs. Avoid this by tracking the suspended state separately from
the initialised state.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
During tracking down a PAE compile failure, I found that config.h was being
included in a bunch of places in i386 code. It is no longer necessary, so
drop it.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a pte_update_hook which notifies about pte changes that have been made
without using the set_pte / clear_pte interfaces. This allows shadow mode
hypervisors which do not trap on page table access to maintain synchronized
shadows.
It also turns out, there was one pte update in PAE mode that wasn't using any
accessor interface at all for setting NX protection. Considering it is PAE
specific, and the accessor is i386 specific, I didn't want to add a generic
encapsulation of this behavior yet.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that ptep_establish has a definition in PAE i386 3-level paging code, the
only paging model which is insane enough to have multi-word hardware PTEs
which are not efficient to set atomically, we can remove the ghost of
set_pte_atomic from other architectures which falesly duplicated it, and
remove all knowledge of it from the generic pgtable code.
set_pte_atomic is now a private pte operator which is specific to i386
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The ptep_establish macro is only used on user-level PTEs, for P->P mapping
changes. Since these always happen under protection of the pagetable lock,
the strong synchronization of a 64-bit cmpxchg is not needed, in fact, not
even a lock prefix needs to be used. We can simply instead clear the P-bit,
followed by a normal set. The write ordering is still important to avoid the
possibility of the TLB snooping a partially written PTE and getting a bad
mapping installed.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Create a new PTE function which combines clearing a kernel PTE with the
subsequent flush. This allows the two to be easily combined into a single
hypercall or paravirt-op. More subtly, reverse the order of the flush for
kmap_atomic. Instead of flushing on establishing a mapping, flush on clearing
a mapping. This eliminates the possibility of leaving stale kmap entries
which may still have valid TLB mappings. This is required for direct mode
hypervisors, which need to reprotect all mappings of a given page when
changing the page type from a normal page to a protected page (such as a page
table or descriptor table page). But it also provides some nicer semantics
for real hardware, by providing extra debug-proofing against using stale
mappings, as well as ensuring that no stale mappings exist when changing the
cacheability attributes of a page, which could lead to cache conflicts when
two different types of mappings exist for the same page.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove ptep_test_and_clear_{dirty|young} from i386, and instead use the
dominating functions, ptep_clear_flush_{dirty|young}. This allows the TLB
page flush to be contained in the same macro, and allows for an eager
optimization - if reading the PTE initially returned dirty/accessed, we can
assume the fact that no subsequent update to the PTE which cleared accessed /
dirty has occurred, as the only way A/D bits can change without holding the
page table lock is if a remote processor clears them. This eliminates an
extra branch which came from the generic version of the code, as we know that
no other CPU could have cleared the A/D bit, so the flush will always be
needed.
We still export these two defines, even though we do not actually define
the macros in the i386 code:
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
The reason for this is that the only use of these functions is within the
generic clear_flush functions, and we want a strong guarantee that there
are no other users of these functions, so we want to prevent the generic
code from defining them for us.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement lazy MMU update hooks which are SMP safe for both direct and shadow
page tables. The idea is that PTE updates and page invalidations while in
lazy mode can be batched into a single hypercall. We use this in VMI for
shadow page table synchronization, and it is a win. It also can be used by
PPC and for direct page tables on Xen.
For SMP, the enter / leave must happen under protection of the page table
locks for page tables which are being modified. This is because otherwise,
you end up with stale state in the batched hypercall, which other CPUs can
race ahead of. Doing this under the protection of the locks guarantees the
synchronization is correct, and also means that spurious faults which are
generated during this window by remote CPUs are properly handled, as the page
fault handler must re-check the PTE under protection of the same lock.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change pte_clear_full to a more appropriately named pte_clear_not_present,
allowing optimizations when not-present mapping changes need not be reflected
in the hardware TLB for protected page table modes. There is also another
case that can use it in the fremap code.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
