There was a bug in the truncation/invalidation race path for
->page_mkwrite for gfs2. It ought to return 0 so that the effect is the
same as if the page was truncated at any of the other points at which
the page_lock is dropped. This will result in the restart of the whole
page fault path. If it was due to a real truncation (as opposed to an
invalidate because we let a glock go) then the ->fault path will pick
that up when it gets called again.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
It is possible to reduce the size of GFS2 inodes by taking the i_alloc
structure out of the gfs2_inode. This patch allocates the i_alloc
structure whenever its needed, and frees it afterward. This decreases
the amount of low memory we use at the expense of requiring a memory
allocation for each page or partial page that we write. A quick test
with postmark shows that the overhead is not measurable and I also note
that OCFS2 use the same approach.
In the future I'd like to solve the problem by shrinking down the size
of the members of the i_alloc structure, but for now, this reduces the
immediate problem of using too much low-memory on x86 and doesn't add
too much overhead.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is just a cleanup. Function gfs2_get_block() just calls
function gfs2_block_map reversing the last two parameters. By
reversing the parameters, gfs2_block_map() may be called directly
and function gfs2_get_block may be eliminated altogether.
Since this function is done for every block operation,
this streamlines the code and makes it a little bit more efficient.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 supports two modes of locking - lock_nolock for single node filesystem
and lock_dlm for cluster mode locking. The gfs2 lock methods are removed from
file operation table for lock_nolock protocol. This would allow VFS to handle
posix lock and flock logics just like other in-tree filesystems without
duplication.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Just like ext3 we now have three sets of address space operations
to cover the cases of writeback, ordered and journalled data
writes. This means that the individual operations can now become
less complicated as we are able to remove some of the tests for
file data mode from the code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This cleans up the mmap() code path for GFS2 by implementing the
page_mkwrite function for GFS2. We are thus able to use the
generic filemap_fault function for our ->fault() implementation.
This now means that shared writable mappings will be much more
efficiently shared across the cluster if there is a reasonable
proportion of read activity (the greater proportion, the better).
As a side effect, it also reduces the size of the code, removes
special cases from readpage and readpages, and makes the code
path easier to follow.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As requested by Christoph, this patch cleans up GFS2's internal
read function so that it no longer uses the do_generic_mapping_read
function. This function is obsolete and GFS2 is the last user of it.
As a side effect the internal read code gets smaller and easier
to read and gfs2_readpage is split into two. One function has the locking
and the other function has the rest of the logic.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
The early LFS work that Linux uses favours EFBIG in various places. SuSv3
specifically uses EOVERFLOW for this as noted by Michael (Bug 7253)
[EOVERFLOW]
The named file is a regular file and the size of the file cannot be
represented correctly in an object of type off_t. We should therefore
transition to the proper error return code
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'locks' of git://linux-nfs.org/~bfields/linux:
nfsd: remove IS_ISMNDLCK macro
Rework /proc/locks via seq_files and seq_list helpers
fs/locks.c: use list_for_each_entry() instead of list_for_each()
NFS: clean up explicit check for mandatory locks
AFS: clean up explicit check for mandatory locks
9PFS: clean up explicit check for mandatory locks
GFS2: clean up explicit check for mandatory locks
Cleanup macros for distinguishing mandatory locks
Documentation: move locks.txt in filesystems/
locks: add warning about mandatory locking races
Documentation: move mandatory locking documentation to filesystems/
locks: Fix potential OOPS in generic_setlease()
Use list_first_entry in locks_wake_up_blocks
locks: fix flock_lock_file() comment
Memory shortage can result in inconsistent flocks state
locks: kill redundant local variable
locks: reverse order of posix_locks_conflict() arguments
This patch adds a new flag to the gfs2_holder structure GL_FLOCK.
It is set on holders of glocks representing flocks. This flag is
checked in add_to_queue() and a process is permitted to queue more
than one holder onto a glock if it is set. This solves the issue
of a process not being able to do multiple flocks on the same file.
Through a single descriptor, a process can now promote and demote
flocks. Through multiple descriptors a process can now queue
multiple flocks on the same file. There's still the problem of
a process deadlocking itself (because gfs2 blocking locks are not
interruptible) by queueing incompatible deadlock.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The __mandatory_lock(inode) function makes the same check, but makes the code
more readable.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Due to a mix up between the jdata attribute and inherit jdata attribute
it has not been possible to set the inherit jdata attribute on
directories. This is now fixed and the ioctl will report the inherit
jdata attribute for directories rather than the jdata attribute as it
did previously. This stems from our need to have the one bit in the
ioctl attr flags mean two different things according to whether the
underlying inode is a directory or not.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Make it a little more clear that this is the default implementation for
the setleast operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change ->fault prototype. We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things. This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).
This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.
struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.
The page is now returned via a page pointer in the vm_fault struct.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.
->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping. The hitch here
is that the ->nopage handler didn't pass down enough information (ie. pgoff).
But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).
Having the populate handler install the pte itself is likewise a nasty thing
to be doing.
This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn. Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.
The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.
After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache. Seems like a fringe functionality anyway.
NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no
users have hit mainline yet.
[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the race between invalidate_inode_pages and do_no_page.
Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.
The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache. Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.
The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.
Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).
Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size. do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size). The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data. Valid mappings to the same
place will see a different page.
Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit. He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight. However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit. Scalability is not an issue.
This patch implements this latter approach. ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so). do_no_page only unlocks the page after setting up the mapping
completely. invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).
This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since gfs2 can't prevent conflicting opens or leases on other nodes, we
probably shouldn't allow it to give out leases at all.
Put the newly defined lease operation into use in gfs2 by turning off
lease, unless we're using the "nolock' locking module (in which case all
locking is local anyway).
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
They can use generic_file_splice_read() instead. Since sys_sendfile() now
prefers that, there should be no change in behaviour.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch cleans up the inode number handling code. The main difference
is that instead of looking up the inodes using a struct gfs2_inum_host
we now use just the no_addr member of this structure. The tests relating
to no_formal_ino can then be done by the calling code. This has
advantages in that we want to do different things in different code
paths if the no_formal_ino doesn't match. In the NFS patch we want to
return -ESTALE, but in the ->lookup() path, its a bug in the fs if the
no_formal_ino doesn't match and thus we can withdraw in this case.
In order to later fix bz #201012, we need to be able to look up an inode
without knowing no_formal_ino, as the only information that is known to
us is the on-disk location of the inode in question.
This patch will also help us to fix bz #236099 at a later date by
cleaning up a lot of the code in that area.
There are no user visible changes as a result of this patch and there
are no changes to the on-disk format either.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add NFS lock support to GFS2.
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
posix_test_lock() and ->lock() do the same job but have gratuitously
different interfaces. Modify posix_test_lock() so the two agree,
simplifying some code in the process.
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.
To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.
Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes the extra filldir callback which gfs2 was using to
enclose an attempt at readahead for inodes during readdir. The
code was too complicated and also hurts performance badly in the
case that the getdents64/readdir call isn't being followed by
stat() and it wasn't even getting it right all the time when it
was.
As a result, on my test box an "ls" of a directory containing 250000
files fell from about 7mins (freshly mounted, so nothing cached) to
between about 15 to 25 seconds. When the directory content was cached,
the time taken fell from about 3mins to about 4 or 5 seconds.
Interestingly in the cached case, running "ls -l" once reduced the time
taken for subsequent runs of "ls" to about 6 secs even without this
patch. Now it turns out that there was a special case of glocks being
used for prefetching the metadata, but because of the timeouts for these
locks (set to 10 secs) the metadata was being timed out before it was
being used and this the prefetch code was constantly trying to prefetch
the same data over and over.
Calling "ls -l" meant that the inodes were brought into memory and once
the inodes are cached, the glocks are not disposed of until the inodes
are pushed out of the cache, thus extending the lifetime of the glocks,
and thus bringing down the time for subsequent runs of "ls"
considerably.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a bit better than the previous version of gfs2_fsync()
although it would be better still if we were able to call a
function which only wrote the inode & metadata. Its no big deal
though that this will potentially write the data as well since
the VFS has already done that before calling gfs2_fsync(). I've
also added a comment to explain whats going on here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@osdl.org>
The gfs2_fsync() function was doing a journal flush on each
and every call. While this is correct, its also a lot of
overhead. This patch means that on fdatasync flushes we
rely on the VFS to flush the data for us and we don't do
a journal flush unless we really need to.
We have to do a journal flush for stuffed files though because
they have the data and the inode metadata in the same block.
Journaled files also need a journal flush too of course.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The gfs2_glock_nq_m_atime function is unused in so far as its only
ever called with num_gh = 1, and this falls through to the
gfs2_glock_nq_atime function, so we might as well call that directly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We were setting the inode flags from GFS2's flags far too often, even when they
couldn't possibly have changed. This patch reduces the amount of flag
setting going on so that we do it only when the inode is read in or
when the flags have changed. The create case is covered by the "when
the inode is read in" case.
This also fixes a bug where we didn't set S_SYNC correctly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This removes the duplicate di_mode field in favour of using the
inode->i_mode field. This saves 4 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Everywhere this was called, a struct gfs2_inode was available,
but despite that, it was always called with a struct gfs2_dinode
as an argument. By making this change it paves the way to start
eliminating fields duplicated between the kernel's struct inode
and the struct gfs2_dinode.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Update GFS2 in the light of David Howells' patch:
[PATCH] BLOCK: Move common FS-specific ioctls to linux/fs.h [try #6]
36695673b0
which calls the filesystem independant flags FS_..._FL. As a result
we no longer need the flags.h file and the conversion routine is
moved into the GFS2 source code.
Userland programs which used to include iflags.h should now include
fs.h and use the new flag names.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix GFS for streamline-generic_file_-interfaces-and-filemap.patch
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
lm_interface.h has a few out of the tree clients such as GFS1
and userland tools.
Right now, these clients keeps a copy of the file in their build tree
that can go out of sync.
Move lm_interface.h to include/linux, export it to userland and
clean up fs/gfs2 to use the new location.
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's fifth email. This has most of the changes
recommended, which is the removal of casts which are not required,
some indenting fixes and similar.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This makes all fixed size types have consistent names.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.
The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].
I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tidy up some files and remove an unused routine in meta_io.h. Also
added a bit of extra debugging in meta_io.h.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per comments received, alter the GFS2 direct I/O path so that
it uses the standard read functions "out of the box". Needs a
small change to one of the VFS functions. This reduces the size
of the code quite a lot and also removes the need for one new export.
Some more work remains to be done, but this is the bones of the
thing.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
traced the "umount hang due to spurious glock" issue that I was having
with gfs2meta. It's in the do_gfs2_set_flags function, which does a
gfs2_holder_init as well as a gfs2_glock_nq_init (increases ref count by
2 instead of 1).
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
