1
Commit Graph

545 Commits

Author SHA1 Message Date
Kuninori Morimoto
858424b998 V4L/DVB (13670): soc-camera: Add mt9t112 camera driver
create mode 100644 drivers/media/video/mt9t112.c
 create mode 100644 include/media/mt9t112.h

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:41 -02:00
Kuninori Morimoto
85dc1cff0d V4L/DVB (13665): sh_mobile_ceu_camera: Add support for sync polarity selection
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:35 -02:00
Guennadi Liakhovetski
a6b5f2008a V4L/DVB (13661): rj54n1cb0c: Add cropping, auto white balance, restrict sizes, add platform data
It has been experimentally found out, that the sensor only supports up to
512x384 video output and also has some restrictions on minimum scale. We
disable non-working size ranges until, maybe, someone finds out how to properly
set them up. Also add cropping support, an auto white balance control, platform
data to specify master clock frequency and polarity of the IOCTL pin.

 create mode 100644 include/media/rj54n1cb0c.h

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:30 -02:00
Guennadi Liakhovetski
760697beca V4L/DVB (13659): soc-camera: convert to the new mediabus API
Convert soc-camera core and all soc-camera drivers to the new mediabus
API. This also takes soc-camera client drivers one step closer to also be
usable with generic v4l2-subdev host drivers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:29 -02:00
Guennadi Liakhovetski
9a74251d8b V4L/DVB (13658): v4l: add a media-bus API for configuring v4l2 subdev pixel and frame formats
Video subdevices, like cameras, decoders, connect to video bridges over
specialised busses. Data is being transferred over these busses in various
formats, which only loosely correspond to fourcc codes, describing how video
data is stored in RAM. This is not a one-to-one correspondence, therefore we
cannot use fourcc codes to configure subdevice output data formats. This patch
adds codes for several such on-the-bus formats and an API, similar to the
familiar .s_fmt(), .g_fmt(), .try_fmt(), .enum_fmt() API for configuring those
codes. After all users of the old API in struct v4l2_subdev_video_ops are
converted, it will be removed. Also add helper routines to support generic
pass-through mode for the soc-camera framework.

 create mode 100644 drivers/media/video/soc_mediabus.c
 create mode 100644 include/media/soc_mediabus.h
 create mode 100644 include/media/v4l2-mediabus.h

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:27 -02:00
Guennadi Liakhovetski
0f4482940a V4L/DVB (13650): soc-camera: switch drivers and platforms to use .priv in struct soc_camera_link
After this change drivers can be further extended to not fail, if they don't
get platform data, but to use defaults.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:19 -02:00
Guennadi Liakhovetski
3fd7ceffdd V4L/DVB (13648): soc-camera: add a private field to struct soc_camera_link
Up to now, if a client driver needed platform data apart from those contained
in struct soc_camera_link, it had to embed the struct into its own object. This
makes the use of such a driver in configurations other than soc-camera

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:18 -02:00
Guennadi Liakhovetski
5d28d52545 V4L/DVB (13645): soc-camera: fix multi-line comment coding style
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:15 -02:00
Guennadi Liakhovetski
325361088b V4L/DVB (13644): v4l: add new v4l2-subdev sensor operations, use g_skip_top_lines in soc-camera
Introduce new v4l2-subdev sensor operations, move .enum_framesizes() and
.enum_frameintervals() methods to it, add a new .g_skip_top_lines() method
and switch soc-camera to use it instead of .y_skip_top soc_camera_device
member, which can now be removed.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:13 -02:00
Guennadi Liakhovetski
11e3d1adbe V4L/DVB (13643): soc-camera: remove no longer needed struct members
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:12 -02:00
Muralidharan Karicheri
2e535ed5a1 V4L/DVB (13618): v4l2: Adding helper function to get dv preset description
This patch adds a helper function to get description of a digital
video preset added by the video timing API. This will be useful for drivers
implementing the above API.

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:47 -02:00
Mauro Carvalho Chehab
579e7d60ba V4L/DVB (13617): ir: move input_register_device() to happen inside ir_input_register()
We'll need to register a sysfs class for the IR devices. As such, the better
is to have the input_register_device()/input_unregister_device() inside
the ir register/unregister functions.

Also, solves a naming problem with V4L ir_input_init() function, that were,
in fact, registering a device.

While here, do a few cleanups at budget-ci IR logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:45 -02:00
Mauro Carvalho Chehab
38ef6aa884 V4L/DVB (13616): IR: rename ir_input_free as ir_input_unregister
Now, ir_input_free does more than just freeing the keytab. Better to
rename it as ir_input_unregister.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:44 -02:00
Mauro Carvalho Chehab
75543cce0c V4L/DVB (13615): ir-core: create ir_input_register
Move non-V4L specific stuff from ir-functions ir_input_init() into
a new function to register ir devices: ir_input_register().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:44 -02:00
Mauro Carvalho Chehab
446e4a64d2 V4L/DVB (13613): IR: create ir-core module
Split the ir-common into two separate modules:
	- ir-core: it is the IR-independent functions;
	- ir-common: has the common part used by V4L drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:42 -02:00
Muralidharan Karicheri
b6456c0cfe V4L/DVB (13571): v4l: Adding Digital Video Timings APIs
This adds the above APIs to the v4l2 core. This is based on version v1.2
of the RFC titled "V4L - Support for video timings at the input/output interface"
Following new ioctls are added:-

        - VIDIOC_ENUM_DV_PRESETS
        - VIDIOC_S_DV_PRESET
        - VIDIOC_G_DV_PRESET
        - VIDIOC_QUERY_DV_PRESET
        - VIDIOC_S_DV_TIMINGS
        - VIDIOC_G_DV_TIMINGS

Please refer to the RFC for the details. This code was tested using vpfe
capture driver on TI's DM365. Following is the test configuration used :-

Blu-Ray HD DVD source -> TVP7002 -> DM365 (VPFE) ->DDR

A draft version of the TVP7002 driver (currently being reviewed in the mailing
list) was used that supports V4L2_DV_1080I60 & V4L2_DV_720P60 presets.

A loopback video capture application was used for testing these APIs. This calls
following IOCTLS :-

 -  verify the new v4l2_input capabilities flag added
 -  Enumerate available presets using VIDIOC_ENUM_DV_PRESETS
 -  Set one of the supported preset using VIDIOC_S_DV_PRESET
 -  Get current preset using VIDIOC_G_DV_PRESET
 -  Detect current preset using VIDIOC_QUERY_DV_PRESET
 -  Using stub functions in tvp7002, verify VIDIOC_S_DV_TIMINGS
    and VIDIOC_G_DV_TIMINGS ioctls are received at the sub device.
 -  Tested on 64bit platform by Hans Verkuil

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:03 -02:00
Laurent Pinchart
327ae59757 V4L/DVB (13557): v4l: Remove unneeded video_device::minor usage in drivers
The video_device::minor field is used where it shouldn't, either to

- test for error conditions that can't happen anymore with the current
  v4l-dvb core,
- store the value in a driver private field that isn't used anymore,
- check the video device type where video_device::vfl_type should be
  used, or
- create the name of a kernel thread that should get a stable name.

Remove or fix those use cases.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:58 -02:00
Laurent Pinchart
957b4aa9f7 V4L/DVB (13552): v4l: Replace video_is_unregistered with video_is_registered
Replace the video_is_unregistered function by a video_is_registered
function. The V4L2_FL_UNREGISTERED flag is replaced by a
V4L2_FL_REGISTERED flag.

This change makes the video_is_registered function return coherent
results when called on an initialize but not yet registered video_device
instance. The function can now be used instead of checking
video_device::minor.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:55 -02:00
Laurent Pinchart
eac8ea536a V4L/DVB (13549): v4l: Add video_device_node_name function
Many drivers access the device number (video_device::v4l2_devnode::num)
in order to print the video device node name. Add and use a helper
function to retrieve the video_device node name.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:54 -02:00
Mauro Carvalho Chehab
cda4303f55 V4L/DVB (13546): ir-keymaps: Add table for Terratec Cinergy XS FM
This IR uses NEC protocol, with address=0x14. This keymap is similar
to the existing Terratec Cinergy XS, except that:
	- it contains the full address/command code;
	- the Music button were mapped as KEY_RADIO;
	- some keycodes from the previous entry were wrong, IMHO.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:53 -02:00
Mauro Carvalho Chehab
d30a3fe896 V4L/DVB (13543): ir-common: Associate a table with a given protocol type
While here, convert the protocol types into an enum
and define 0 as unknown.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:52 -02:00
Mauro Carvalho Chehab
7fee03e487 V4L/DVB (13540): ir-common: Cleanup get key evdev code
The same loop to seek for a key were used on different places. Also,
no spinlock were protecting it to avoid the risk of replacing a keycode
while seeking for a new code.

This cleanup does:
	- create an unique function to seek for a code;
	- adds an spinlock to protect the table lookup;
	- remove some unused code;
	- simplifies to code to make it easier to understand.

Basically no change in behavior should be noticed after this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:22 -02:00
Mauro Carvalho Chehab
a53e212571 V4L/DVB (13539): ir-common: add __func__ for debug messages
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:22 -02:00
Mauro Carvalho Chehab
f6fc504940 V4L/DVB (13538): ir-common: Use a dynamic keycode table
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:21 -02:00
Mauro Carvalho Chehab
055cd55601 V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
Currently, the IR table is initialized by calling ir_input_init(). However,
this function doesn't return any error code, nor has a function to be called
when de-initializing the IR's.

Change the return argment to integer and make sure that each driver will
handle the error code. Also adds a function to free any resources that may
be allocating there: ir_input_free().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:21 -02:00
Mauro Carvalho Chehab
35d1988c6e V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
Now that V4L drivers can support more than 7 bits for scan code, let's
add a modified version for the Hauppauge Grey IR containing the full IR
scancode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:20 -02:00
Mauro Carvalho Chehab
6d691237e6 V4L/DVB (13534): ir-common: Remove some unused fields/structs
Now that the IR conversion to dynamic tables has finished, we can get
rid of some fields and definitions that aren't used anymore.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:20 -02:00
Mauro Carvalho Chehab
8573b74af2 V4L/DVB (13533): ir: use dynamic tables, instead of static ones
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:19 -02:00
Mauro Carvalho Chehab
ef53a1159d V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
V4L drivers use an static keycode vector with 128 entries, where the scancode
indexes the keycode. While this works, it limits the scancodes to have only
7 bits, not allowing for example full RC5 codes.

Instead of implementing the same code on every V4L driver, provide a common
infrastructure to handle the bigger tables, minimizing the changes inside
each driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:19 -02:00
Mauro Carvalho Chehab
4e89217b94 V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
As newer IR common code will be added on other files, we need a global
debug var inside the module.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:18 -02:00
Hans Verkuil
dbc8e34a32 V4L/DVB (13477): v4l2-subdev: remove unnecessary check
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:05 -02:00
Vaibhav Hiremath
e53a70b472 V4L/DVB (13464): Davinci VPFE Capture: add i2c adapter id in platform data
The I2C adapter ID is actually depends on Board and may vary, Davinci
uses id=1, but in case of AM3517 id=3.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:01 -02:00
Jonathan Corbet
f8b0bca1a7 V4L/DVB (13417): Fix videobuf_queue_vmalloc_init() prototype
For whatever reason, the device structure pointer to
videobuf_queue_vmalloc_init is typed "void *", even though it's passed
right through to videobuf_queue_core_init(), which expects a struct
device pointer.  The other videobuf implementations use struct device *;
I think vmalloc should too.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:47 -02:00
Jonathan Corbet
38a54f35a0 V4L/DVB (13377): make struct videobuf_queue_ops constant
The videobuf_queue_ops function vector is not declared constant, but
there's no need for the videobuf layer to ever change it.  Make it const
so that videobuf users can make their operations const without warnings.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:35 -02:00
Laurent Pinchart
622b828ab7 V4L/DVB (13238): v4l2_subdev: rename tuner s_standby operation to core s_power
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice
power state from the core. This use case is already partially covered by
the tuner s_standby operation, but no way to explicitly come back from
the standby state is available.

Rename the tuner s_standby operation to core s_power, and fix tuner
drivers accordingly. The tuner core will call s_power(0) instead of
s_standby(). No explicit call to s_power(1) is required for tuners as
they are supposed to wake up from standby automatically.

[mchehab@redhat.com: CodingStyle fix]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:03 -02:00
David T.L. Wong
fb29ab9698 V4L/DVB (13206): cx25840: add component support
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:52 -02:00
Richard Röjfors
eea85b0a62 V4L/DVB (13177): radio: Add support for TEF6862 tuner
This patch adds support for TEF6862 Car Radio Enhanced Selectivity Tuner.

It's implemented as a subdev, supporting checking signal strength
and setting and getting frequency.

Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:43 -02:00
Igor M. Liplianin
9d2ba7ad80 V4L/DVB (13135): Add support for TeVii remotes
The patch brings infrared remote support for some cx88 based cards.
Such as TeVii S460,S420.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:29 -02:00
Igor M. Liplianin
d8d8622552 V4L/DVB (13134): Add support for TBS-likes remotes
The patch brings infrared remote support for some cx88 based cards.
Such as:
TeVii S460,S420; Omicom SS4; SatTrade ST4200;
TBS 8920,8910; Prof 7300,6200.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:29 -02:00
Guennadi Liakhovetski
8f37cf25ba V4L/DVB (13130): soc-camera: add a new driver for the RJ54N1CB0C camera sensor from Sharp
This adds an soc-camera / v4l2-subdev driver for the RJ54N1CB0C CMOS camera
sensor from Sharp. The sensor is very picky about initialisation and
configuration sequences. The driver limits artificially maximum window size by
800x600, although the sensor supports 1600x1200. Sizes above 800x600 don't seem
to work correctly, besides, examples from the system integrator use sizes above
640x480 only for still photography. Unfortunately, I had to use "magic"
register-value pairs for undocumented and "reserved" registers. This version of
the driver also omits some functionality, like cropping, which hasn't been
sufficiently tested yet and will be added later.

 create mode 100644 drivers/media/video/rj54n1cb0c.c

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:28 -02:00
Michael Krufky
9133aee09e V4L/DVB (13103): create a standard method for dvb adapter drivers to override frontend ioctls
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:21 -02:00
Andy Walls
1d23a00243 V4L/DVB (13099): ir-functions: Export ir_rc5_decode() for use by the cx23885 module
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:21 -02:00
Andy Walls
1d986add96 V4L/DVB (13096): v4l2-subdev: Add v4l2_subdev_ir_ops and IR notify defines for v4l2_device
Add v4l2_subdev_ir_ops and IR notify defines for v4l2_device.  This change
is specifically needed at this time to support the integrated IR controller in
the CX2388[58] chips.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:19 -02:00
Andy Walls
f56db93cef V4L/DVB (13084): v4l2-chip-ident: Add ID's needed for the cx23885 and cx25840 modules
Add identifiers for CX2388[578] chips, CX2310[012] chips, integrated
A/V decoders cores, integrated IR controller core, and the CX23417
MPEG encoder.  The cx23885 module and cx25840 module will use these
identifiers in upcoming changes.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:16 -02:00
Marek Vasut
8d64827172 V4L/DVB (13040): V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV9640 sensor
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:01 -02:00
Richard Röjfors
6789cb5230 V4L/DVB (13019): video: initial support for ADV7180
This is an initial driver for Analog Devices ADV7180 Video Decoder.
So far it only supports query standard.

[akpm@linux-foundation.org: remove unneeded cast]
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:53:39 -03:00
Hans Verkuil
6b5270d212 V4L/DVB (12725): v4l: warn when desired devnodenr is in use & add _no_warn function
Warn when the desired device node number is already in use, except when
the new video_register_device_no_warn function is called since in some
use-cases that warning is not relevant.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:19:34 -03:00
Hans Verkuil
7ae0cd9bc7 V4L/DVB (12541): v4l: remove video_register_device_index
video_register_device_index is never actually called, instead the
stream index number is always calculated automatically.

This patch removes this function and simplifies the internal get_index
function since that can now always just return the first free index.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:19:26 -03:00
Hans Verkuil
53dacb1570 V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friends
Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg
and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr.

This simplifies this API substantially.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:19:24 -03:00
Guennadi Liakhovetski
96c7539954 V4L/DVB (12536): soc-camera: remove .gain and .exposure struct soc_camera_device members
This makes the soc-camera interface for V4L2 subdevices thinner yet. Handle
gain and exposure internally in each driver just like all other controls.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:19:20 -03:00