In order to avoid the "Busy inodes after unmount" error message, we need to
ensure that nfs_async_unlink_release() releases the super block after the
call to nfs_free_unlinkdata().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
MAY_... found in mask.
The obvious next target in that direction is permission(9)
folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the following compile error caused by commit
f9247273cb ("UFS: add const to parser
token table"):
CC fs/nfs/nfsroot.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/nfs/nfsroot.c:130: error: tokens causes a section type conflict
make[3]: *** [fs/nfs/nfsroot.o] Error 1
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page accesses are serialised using the page locks, whereas all attribute
updates are serialised using the inode->i_lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Page cache accesses are serialised using page locks, whereas attribute
updates are serialised using inode->i_lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Attribute updates are safe, and dentry operations are protected using VFS
level locks. Defer removing the BKL from sillyrename until a separate
patch.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All dentry-related operations are already BKL-safe, since they are
protected by the VFS locking. No extra locks should be needed in the NFS
code.
In the case of nfs_revalidate_inode(), we're only doing an attribute
update (protected by the inode->i_lock).
In the case of nfs_lookup(), we're instantiating a new dentry, so there
should be no contention possible until after we call d_materialise_unique.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_instantiate() does not require the BKL, neither do the attribute
updates or the RPC code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All the NFSv4 stateful operations are already protected by other locks (in
particular by the rpc_sequence locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The main problem is dealing with inode->i_size: we need to set the
inode->i_lock on all attribute updates, and so vmtruncate won't cut it.
Make an NFS-private version of vmtruncate that has the necessary locking
semantics.
The result should be that the following inode attribute updates are
protected by inode->i_lock
nfsi->cache_validity
nfsi->read_cache_jiffies
nfsi->attrtimeo
nfsi->attrtimeo_timestamp
nfsi->change_attr
nfsi->last_updated
nfsi->cache_change_attribute
nfsi->access_cache
nfsi->access_cache_entry_lru
nfsi->access_cache_inode_lru
nfsi->acl_access
nfsi->acl_default
nfsi->nfs_page_tree
nfsi->ncommit
nfsi->npages
nfsi->open_files
nfsi->silly_list
nfsi->acl
nfsi->open_states
inode->i_size
inode->i_atime
inode->i_mtime
inode->i_ctime
inode->i_nlink
inode->i_uid
inode->i_gid
The following is protected by dir->i_mutex
nfsi->cookieverf
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The kernel's NFS client mount option parser currently doesn't allow
unrecognized or incorrect mount options. This prevents misspellings or
incorrectly specified mount options from possibly causing silent data
corruption.
However, NFS mount options are not standardized, so different operating
systems can use differently spelled mount options to support similar
features, or can support mount options which no other operating system
supports.
"Sloppy" mount option parsing, which allows the parser to ignore any
option it doesn't recognize, is needed to support automounters that often
use maps that are shared between heterogenous operating systems.
The legacy mount command ignores the validity of the values of mount
options entirely, except for the "sec=" and "proto=" options. If an
incorrect value is specified, the out-of-range value is passed to the
kernel; if a value is specified that contains non-numeric characters,
it appears as though the legacy mount command sets that option to zero
(probably incorrect behavior in general).
In any case, this sets a precedent which we will partially follow for
the kernel mount option parser:
+ if "sloppy" is not set, the parser will be strict about both
unrecognized options (same as legacy) and invalid option
values (stricter than legacy)
+ if "sloppy" is set, the parser will ignore unrecognized
options and invalid option values (same as legacy)
An "invalid" option value in this case means that either the type
(integer, short, or string) or sign (for integer values) of the specified
value is incorrect.
This patch does two things: it changes the NFS client's mount option
parsing loop so that it parses the whole string instead of failing at
the first unrecognized option or invalid option value. An unrecognized
option or an invalid option value cause the option to be skipped.
Then, the patch adds a "sloppy" mount option that allows the parsing
to succeed anyway if there were any problems during parsing. When
parsing a set of options is complete, if there are errors and "sloppy"
was specified, return success anyway. Otherwise, only return success
if there are no errors.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set the default security flavor when we set the other mount option
default values for NFSv4. This cleans up the NFSv4 mount option parsing
path to look like the NFSv2/v3 one.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set the default security flavor when we set the other mount option default
values. After this change, only the legacy user-space mount path needs to
set the NFS_MOUNT_SECFLAVOUR flag.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Refactor the NFS mount option parsing function to extract the
security flavor parsing logic into a separate function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The remount path does not need to set the port in the server address.
Since it's not really a part of option parsing, move the nfs_set_port()
call to nfs_parse_mount_options()'s callers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the UDP/TCP default timeo/retrans settings for text mounts to
nfs_init_timeout_values(), which was were they were always being
initialised (and sanity checked) for binary mounts.
Document the default timeout values using appropriate #defines.
Ensure that we initialise and sanity check the transport protocols that
may have been specified by the user.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the nfsv4 callback thread is rapidly brought up and down, it's
possible that nfs_callback_svc might never get a chance to run. If
this happens, the cleanup at thread exit might never occur, throwing
the refcounting off and nfs_callback_info in an incorrect state.
Move the clean functions into nfs_callback_down. Also change the
nfs_callback_info struct to track the svc_rqst rather than svc_serv
since we need to know that to call svc_exit_thread.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs_callback_mutex is sufficient protection.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
gcc (4.3.0) rightfully warns about this:
/usr0/export/dev/bhalevy/git/linux-pnfs-bh-nfs41/fs/nfs/nfs4proc.c: In function nfs4_proc_setclientid_confirm:
/usr0/export/dev/bhalevy/git/linux-pnfs-bh-nfs41/fs/nfs/nfs4proc.c:2936: warning: timeout may be used uninitialized in this function
nfs4_delay that's passed a pointer to 'timeout' is looking at its value
and sets it up to some value in the range: NFS4_POLL_RETRY_MIN..NFS4_POLL_RETRY_MAX
if (*timeout <= 0)
*timeout = NFS4_POLL_RETRY_MIN;
if (*timeout > NFS4_POLL_RETRY_MAX)
*timeout = NFS4_POLL_RETRY_MAX;
Therefore it will end up set to some sane, though rather indeterministic, value.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add support in the kernel NFS client's address parser for interface
identifiers.
IPv6 link-local addresses require an additional "interface identifier",
which is a network device name or an integer that indexes the array of
local network interfaces. They are suffixed to the address with a '%'.
For example:
fe80::215:c5ff:fe3b:e1b2%2
indicates an interface index of 2. Or
fe80::215:c5ff:fe3b:e1b2%eth0
indicates that requests should be routed through the eth0 device.
Without the interface ID, link-local addresses are not usable for NFS.
Both the kernel NFS client mount option parser and the mount.nfs command
can take either form. The mount.nfs command always passes the address
through getnameinfo(3), which usually re-writes interface indices as
device names.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To make nfs_parse_server_address() more generally useful, allow it to
accept input strings that are not terminated with '\0'.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Traditionally the mount command has looked for a ":" to separate the
server's hostname from the export path in the mounted on device name,
like this:
mount server:/export /mounted/on/dir
The server's hostname is "server" and the export path is "/export".
You can also substitute a specific IPv4 network address for the server
hostname, like this:
mount 192.168.0.55:/export /mounted/on/dir
Raw IPv6 addresses present a problem, however, because they look
something like this:
fe80::200:5aff:fe00:30b
Note the use of colons.
To get around the presence of colons, copy the Solaris convention used for
mounting IPv6 servers by address: wrap a raw IPv6 address with square
brackets.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To support passing a raw IPv6 address as a server hostname, we need to
expand the logic that handles splitting the passed-in device name into
a server hostname and export path
Start by pulling device name parsing out of the mount option validation
functions and into separate helper functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix the 'nfs4_fs_type' undeclared error in nfs_remount when compiling sans
NFSv4...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Jeff Layton <jlayton@redhat.com>
Currently, if an unstable write completes, we cannot redirty the page in
order to reflect a new change in the page data until after we've sent a
COMMIT request.
This patch allows a page rewrite to proceed without the unnecessary COMMIT
step, putting it immediately back onto the dirty page list, undoing the
VM unstable write accounting, and removing the NFS_PAGE_TAG_COMMIT tag from
the NFS radix tree.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Simplify the loop in nfs_update_request by moving into a separate function
the code that attempts to update an existing cached NFS write.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: the "intr" and "nointr" mount options were recently retired.
Document this in the NFS mount option parser.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The kernel NFS mount option parser should ignore the retry= mount option
since it is meaningful only in user space. Today it expects a number
rather than arbitrary text, so it ignores the option if the value is
numeric, but chokes if there are other characters in the value.
Change it to allow any text (except ",") as its value.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We're not modifying the nfs_server when we call nfs_inc_server_stats and
friends, so allow the compiler to pass 'const' pointers too.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The fs/nfs/iostat.h header has definitions that were designed to be exposed
to user space. Move these definitions under include/linux so user space can
use the definitions in applications that read /proc/self/mountstats.
Also address a handful of coding style issues called out by checkpatch.pl in
fs/nfs/iostat.h.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All instances are set to nfs_open(), so we should just remove the redundant
indirection. Ditto for the file_release op
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
ftruncate() access checking is supposed to be performed at open() time,
just like reads and writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When remounting an NFS or NFS4 filesystem, the new NFS options are not
respected, yet the remount will still return success. This patch adds
a remount_fs sb op for NFS that checks any new nfs mount options against
the existing ones and fails the mount if any have changed.
This is only implemented for string-based mount options since doing
this with binary options isn't really feasible.
This is essentially the same as the original patch I sent out, but
adds a check to see if the addr= option has changed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch removes a CVS keyword that wasn't updated for a long time
from a comment.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: fix a few dprintk messages that still need to show the RPC task ID
correctly, and be sure we use the preferred %lld or %llu instead of %Ld or
%Lu.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
