There is only a single caller of this function, and that's in
drivers/pwm/core.c itself. So don't export the function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240712171821.1470833-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
While driving a PWM via the sysfs API it's hard to determine the right
order of writes to the pseudo files "period" and "duty_cycle":
If you want to go from duty_cycle/period = 50/100 to 150/300 you have to
write period first (because 150/100 is invalid). If however you start at
400/500 the duty_cycle must be configured first. The rule that works is:
If you increase period write period first, otherwise write duty_cycle
first. A complication however is that it's usually sensible to configure
the polarity before both period and duty_cycle. This can only be done if
the current state's duty_cycle and period configuration isn't bogus
though. It is still worse (but I think only theoretic) if you have a PWM
that only supports inverted polarity and you start with period = 0 and
polarity = normal. Then you can change neither period (because polarity
= normal is refused) nor polarity (because there is still period = 0).
To simplify the corner cases for userspace, let invalid target states
pass if the current state is invalid already.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240628103519.105020-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
With the compiler caring for unlocking the mutex several functions can
be simplified. Benefit from that.
There is just one caller left for mutex_lock(&export->lock). The code
flow is too complicated there to convert it to the compiler assisted
variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/210010f2e579a92476462726e18e0135f6854909.1719520143.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
While the debugfs operations don't technically depend on an initialized
class, they loop over the idr that only can get entries when the class
is properly initialized.
This also fixes the ugly (but harmless) corner case that the debugfs
file stays around after the pwm class failed to initialize.
While at it, add an appropriate error message when class initialization
fails.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240626222529.2901200-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The last user of this function outside of core.c is gone, so it can be
made static.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240607084416.897777-8-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Define all pwm core's symbols in the namespace "PWM". The necessary
module import statement is just added to the main header, this way every
file that knows about the public functions automatically has this
namespace available.
Thanks to Biju Das for pointing out a cut'n'paste failure in my initial
patch.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240607160012.1206874-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
After assigning chip = pwm->chip; the compiler is free to assume that
pwm is non-NULL and so can optimize out the check for pwm against NULL.
While it's probably a programming error to pass a NULL pointer to
pwm_put() this shouldn't be dropped without careful consideration and
wasn't intended.
So assign chip only after the NULL check.
Reported-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/66a6f562-1fdd-4e45-995a-e7995432aa0c@baylibre.com
Fixes: 4c56b1434b ("pwm: Add a struct device to struct pwm_chip")
Link: https://lore.kernel.org/r/20240329101648.544155-2-u.kleine-koenig@pengutronix.de
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
It's required to not free the memory underlying a requested PWM
while a consumer still has a reference to it. While currently a pwm_chip
doesn't live long enough in all cases, linking the struct pwm to the
pwm_chip results in the right lifetime as soon as the pwmchip is living
long enough. This happens with the following commits.
Note this is a breaking change for all pwm drivers that don't use
pwmchip_alloc().
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> # for struct_size() and __counted_by()
Link: https://lore.kernel.org/r/7e9e958841f049026c0023b309cc9deecf0ab61d.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
With the upcoming restructuring having all in a single file simplifies
things a bit. The relevant and somewhat visible changes are:
- Some dropped prototypes from include/linux/pwm.h that were only
necessary that core.c has a declaration of the symbols defined in
sysfs.c. The respective functions are static now.
- The pwm class now also exists if CONFIG_SYSFS isn't enabled. Having
CONFIG_SYSFS is not very relevant today, but even without it the
class and device stuff still provides lifetime tracking.
- Both files had an initcall, these are merged into a single one now.
Instead of a big #ifdef block for CONFIG_DEBUG_FS, a single
if (IS_ENABLED(CONFIG_DEBUG_FS)) is used now. This increases compile
coverage a bit and is a tad nicer on the eyes.
Link: https://lore.kernel.org/r/9e2d39a5280d7dda5bfc6682a8aef510148635b2.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Memory holding a struct device must not be freed before the reference
count drops to zero. So a struct pwm_chip must not live in memory
freed by a driver on unbind. All in-tree drivers were fixed accordingly,
but as out-of-tree drivers, that were not adapted, still compile fine,
catch these in pwmchip_add().
Link: https://lore.kernel.org/r/35f5b229c98f78b2f6ce2397259a4a936be477c0.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This function allocates a struct pwm_chip and driver data. Compared to
the status quo the split into pwm_chip and driver data is new, otherwise
it doesn't change anything relevant (yet).
The intention is that after all drivers are switched to use this
allocation function, its possible to add a struct device to struct
pwm_chip to properly track the latter's lifetime without touching all
drivers again. Proper lifetime tracking is a necessary precondition to
introduce character device support for PWMs (that implements atomic
setting and doesn't suffer from the sysfs overhead of the /sys/class/pwm
userspace support).
The new function pwmchip_priv() (obviously?) only works for chips
allocated with pwmchip_alloc().
Link: https://lore.kernel.org/r/9577d6053a5a52536057dc8654ff567181c2da82.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Currently a pwm_chip stores in its struct device *dev member a pointer
to the parent device. Preparing a change that embeds a full struct
device in struct pwm_chip, this accessor function should be used in all
drivers directly accessing chip->dev now. This way struct pwm_chip and
this new function can be changed without having to touch all drivers in
the same change set.
Make use of this function in the framework's core sources.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/cc30090d2f9762bed9854a55612144bccc910781.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This moves the functions called by pwm consumers above the functions
called by pwm providers. When character device support is added later
this is hooked into the chip registration functions. As the needed
callbacks are a kind of consumer and make use of the consumer functions,
having this order is more natural and prevents having to add
declarations for static functions.
Also move the global variables for pwm tables to the respective
functions to have them properly grouped.
Link: https://lore.kernel.org/r/eed83de07bdfb69b5ceba0b9aed757ee612dea8f.1706182805.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Apart from the two of_xlate implementations this member is write-only.
In the of_xlate functions of_pwm_xlate_with_flags() and
of_pwm_single_xlate() it's more sensible to check for args->args_count
because this is what is actually used in the device tree.
Acked-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/53d8c545aa8f79a920358be9e72e382b3981bdc4.1704835845.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
pwm->chip and pwm->chip->ops are used several times in this function.
Introduce local variables for these.
There is no semantical change, but with ARCH=arm, allmodconfig and
gcc-13 bloat-o-meter reports a slight improvement:
add/remove: 1/1 grow/shrink: 1/1 up/down: 8/-36 (-28)
Function old new delta
pwm_apply_state 476 480 +4
__initcall__kmod_core__307_1092_pwm_debugfs_init4 - 4 +4
__initcall__kmod_core__307_1090_pwm_debugfs_init4 4 - -4
pwm_request_from_chip 628 596 -32
Total: Before=15091, After=15063, chg -0.19%
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Some PWM devices require sleeping, for example if the pwm device is
connected over I2C. However, many PWM devices could be used from atomic
context, e.g. memory mapped PWM. This is useful for, for example, the
pwm-ir-tx driver which requires precise timing. Sleeping causes havoc
with the generated IR signal.
Since not all PWM devices can support atomic context, we also add a
pwm_might_sleep() function to check if is not supported.
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
In the expression determining the size of the allocation for chip->pwms
it's more natural to use sizeof(*chip->pwms) than sizeof(*pwm). With
that changed, the variable pwm is only used in a for loop and its scope
can be reduced accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
While it's not hard to match the entries from /sys/kernel/debug/pwm to
the corresponding pwmchip in /sys/class/pwm, it's a bit simpler to have
the number mentioned in /sys/kernel/debug/pwm.
Link: https://lore.kernel.org/r/20230808165250.942396-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Traditionally each PWM device had a unique ID stored in the "pwm" member
of struct pwm_device. However this number was hardly used and dropped
in the previous commit. To identify a certain PWM you're supposed to use
the chip's ID and the hwpwm of the PWM device now.
With the PWM chip base gone PWM chips can get their IDs better and
simpler using an idr.
This is expected to change the numbering of PWM chips, but nothing
should rely on the numbering anyhow.
Other than that the side effects are:
- The PWM chip IDs are smaller and in most cases consecutive.
- The ordering in /sys/kernel/debug/pwm is ordered by ascending PWM
chip ID.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This member is only assigned to and never read. So drop it.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The semantic of chip_data is a bit surprising as it's cleared when
pwm_put() is called. Also there is a big overlap with the standard driver
data.
All drivers were adapted to not make use of chip_data any more, so it can
go away.
Link: https://lore.kernel.org/r/20230705080650.2353391-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of requiring each driver to care for assigning the owner member
of struct pwm_ops, handle that implicitly using a macro. Note that the
owner member has to be moved to struct pwm_chip, as the ops structure
usually lives in read-only memory and so cannot be modified.
The upside is that new low level drivers cannot forget the assignment and
save one line each. The pwm-crc driver didn't assign .owner, that's not
a problem in practice though as the driver cannot be compiled as a
module.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti
Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip
Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld
Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
pwmchip_add() calls of_pwmchip_add() only after adding the chip to
pwm_chips and releasing pwm_lock. So the proper order in
pwmchip_remove() is to call of_pwmchip_remove() before taking the mutex
and removing the chip from pwm_chips. This way pwmchip_remove() releases
the resources in reverse order compared to pwmchip_add() requesting
them.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
core.c doens't use any of the symbols provided by linux/radix-tree.h
and compiles just fine without this include. So drop the #include.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
pwmchip_remove() returns void since some time but the documentation still
mentions the situations where it used to return an error code. Just remove
this old and now wrong text.
Fixes: 8083f58d08 ("pwm: Make pwmchip_remove() return void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables of type struct pwm_chip * are named "chip", there are
only three outliers called "pc". Change these three to "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The radix tree's only use was to map PWM channels to the global number
space. With that number space gone, the radix tree is now unused, so it
can simply be removed.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since commit 5a7fbe452a ("backlight: pwm_bl: Drop support for legacy PWM
probing") the last user of pwm_request() and pwm_free() is gone. So remove
these functions that were deprecated over 10 years ago in commit
8138d2ddbc ("pwm: Add table-based lookup for static mappings").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[thierry.reding@gmail.com: clean up a bit after removal]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This is just to ensure that .usage_power is properly initialized and
doesn't contain random stack data. The other members of struct pwm_state
should get a value assigned in a successful call to .get_state(). So in
the absence of bugs in driver implementations, this is only a safe-guard
and no fix.
Reported-by: Munehisa Kamata <kamatam@amazon.com>
Link: https://lore.kernel.org/r/20230310214004.2619480-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This suppresses diagnosis for PWM_DEBUG routines and makes sure that
pwm->state isn't modified in pwm_device_request() if .get_state() fails.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Record and report an error code for the events. This allows to report
about failed calls without ambiguity and so gives a more complete
picture.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
list_add() just overwrites the members of the element to add (here:
chip->list) without any checks, even in the DEBUG_LIST case. So save the
effort to initialize the list.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
alloc_pwms() only identified a free range of IDs and this range was marked
as used only later by pwmchip_add(). Instead let alloc_pwms() already do
the marking (which makes the function actually allocating the range and so
justifies the function name). This way access to the allocated_pwms
bitfield is limited to two functions only.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This simplifies error handling as the need for goto error handling goes
away and at the end of the function the code can be simplified as this
code isn't used in the error case any more.
Now memory allocation and the call to of_pwmchip_add() are done without
holding the lock. Both don't access the data structures protected by
&pwm_lock.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To simplify validation of the used locking, document for the global pwm
mutex what it actually protects against concurrent access. Also note for
two functions modifying these that pwm_lock is held by the caller.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The Rockchip and Mediatek drivers gain support for more chips and the
LPSS driver undergoes some refactoring and receives some improvements.
Other than that there are various cleanups of the core.
-----BEGIN PGP SIGNATURE-----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=zTfN
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The Rockchip and Mediatek drivers gain support for more chips and the
LPSS driver undergoes some refactoring and receives some improvements.
Other than that there are various cleanups of the core"
* tag 'pwm/for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: sysfs: Replace sprintf() with sysfs_emit()
pwm: core: Replace custom implementation of device_match_fwnode()
pwm: lpss: Add a comment to the bypass field
pwm: lpss: Make use of bits.h macros for all masks
pwm: lpss: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
pwm: lpss: Use device_get_match_data() to get device data
pwm: lpss: Move resource mapping to the glue drivers
pwm: lpss: Move exported symbols to PWM_LPSS namespace
pwm: lpss: Deduplicate board info data structures
dt-bindings: pwm: Add compatible for Mediatek MT8188
dt-bindings: pwm: rockchip: Add rockchip,rk3128-pwm
dt-bindings: pwm: rockchip: Add description for rk3588
pwm: sysfs: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
pwm: rockchip: Convert to use dev_err_probe()
Replace custom implementation of the device_match_fwnode(). This hides
the implementation details and makes future changes easier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
There are no users outside of PWM core of the of_pwm_get().
Make it static.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The devm_of_pwm_get() has recently lost its single user, drop
the dead API as well.
Note, the new code should use either plain pwm_get() or managed
devm_pwm_get() or devm_fwnode_pwm_get() APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
