blk_limits_io_min and blk_limits_io_opt are unused since the
recent commit
0a94a469a4 ("dm: stop using blk_limits_io_{min,opt}")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240920004817.676216-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some drivers validate that their own logical block size. It is no harm to
always do this, so validate in blk_validate_limits().
This allows us to remove the validation in most of those drivers.
Add a comment to blk_validate_block_size() to inform users that self-
validation of LBS is usually unnecessary.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't reduce the max_sectors value below the normal cap when the driver
advertsizes a very low io_opt. This restores the behavior we had before
the recent changes to the max_sectors calculation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io_min is larger than the cap, it must by definition be non-zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark blk_apply_bdi_limits non-static and open code disk_update_readahead
in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
"static" never goes on a line of its own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a flag for ->flags and not a feature for ->features. And fix the
one place that actually incorrectly cleared it from ->features.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For arm32, we get the following build warning:
In file included from /tmp/next/build/include/linux/printk.h:10,
from /tmp/next/build/include/linux/kernel.h:31,
from /tmp/next/build/block/blk-settings.c:5:
/tmp/next/build/block/blk-settings.c: In function 'blk_validate_atomic_write_limits':
/tmp/next/build/include/asm-generic/div64.h:222:35: warning: comparison of distinct pointer types lacks a cast
222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
| ^~
The divident for do_div() should be 64b, which it is not. Since we want to
check 2x unsigned ints, just use % operator. This allows us to drop the
chunk_sectors variable.
Fixes: 9da3d1e912 ("block: Add core atomic write support")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-next/b765d200-4e0f-48b1-a962-7dfa1c4aef9c@kernel.dk/T/#mbf067b1edd89c7f9d7dac6e258c516199953a108
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240621183016.3092518-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag
New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
of an atomic write which the device may support. It is not
necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
and atomic_write_max_sectors would be the limit on a merged atomic write
request size. This value is not capped at max_sectors, as the value in
max_sectors can be controlled from userspace, and it would only cause
trouble if userspace could limit atomic_write_unit_max_bytes and the
other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
min/max length of an atomic write unit which the device may support. They
both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
indicates an LBA space boundary at which an atomic write straddles no
longer is atomically executed by the disk. The value must be a
power-of-2. Note that it would be acceptable to enforce a rule that
atomic_write_hw_boundary_sectors is a multiple of
atomic_write_hw_unit_max, but the resultant code would be more
complicated.
All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
bytes
- atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in queue limits cleanups.
* for-6.11/block-limits:
block: move the raid_partial_stripes_expensive flag into the features field
block: remove the discard_alignment flag
block: move the misaligned flag into the features field
block: renumber and rename the cache disabled flag
block: fix spelling and grammar for in writeback_cache_control.rst
block: remove the unused blk_bounce enum
Move the raid_partial_stripes_expensive flags into the features field to
reclaim a little bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
queue_limits.discard_alignment is never read except in the places
where it is stacked into another limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the misaligned flags into the features field to reclaim a little
bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240619154623.450048-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in last round of queue limits changes from Christoph.
* for-6.11/block-limits: (26 commits)
block: move the bounce flag into the features field
block: move the skip_tagset_quiesce flag to queue_limits
block: move the pci_p2pdma flag to queue_limits
block: move the zone_resetall flag to queue_limits
block: move the zoned flag into the features field
block: move the poll flag to queue_limits
block: move the dax flag to queue_limits
block: move the nowait flag to queue_limits
block: move the synchronous flag to queue_limits
block: move the stable_writes flag to queue_limits
block: move the io_stat flag setting to queue_limits
block: move the add_random flag to queue_limits
block: move the nonrot flag to queue_limits
block: move cache control settings out of queue->flags
block: remove blk_flush_policy
block: freeze the queue in queue_attr_store
nbd: move setting the cache control flags to __nbd_set_size
virtio_blk: remove virtblk_update_cache_mode
loop: fold loop_update_rotational into loop_reconfigure_limits
loop: also use the default block size from an underlying block device
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the bounce flag into the features field to reclaim a little bit of
space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the zoned flags into the features field to reclaim a little
bit of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the poll flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the nowait flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the cache control settings into the queue_limits so that the flags
can be set atomically with the device queue frozen.
Add new features and flags field for the driver set flags, and internal
(usually sysfs-controlled) flags in the block layer. Note that we'll
eventually remove enough field from queue_limits to bring it back to the
previous size.
The disable flag is inverted compared to the previous meaning, which
means it now survives a rescan, similar to the max_sectors and
max_discard_sectors user limits.
The FLUSH and FUA flags are now inherited by blk_stack_limits, which
simplified the code in dm a lot, but also causes a slight behavior
change in that dm-switch and dm-unstripe now advertise a write cache
despite setting num_flush_bios to 0. The I/O path will handle this
gracefully, but as far as I can tell the lack of num_flush_bios
and thus flush support is a pre-existing data integrity bug in those
targets that really needs fixing, after which a non-zero num_flush_bios
should be required in dm for targets that map to underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently compiling block/blk-settings.c with C=1 gives the following
warning:
block/blk-settings.c:262:9: warning: context imbalance in 'queue_limits_commit_update' - wrong count at exit
request_queue.limits_lock is a mutex. Sparse locking annotation for
mutexes are currently not supported - see [0] - so drop that locking
annotation.
[0] https://lore.kernel.org/lkml/cover.1579893447.git.jbi.octave@gmail.com/T/#mbb8bda6c0a7ca7ce19f46df976a8e3b489745488
Fixes: d690cb8ae1 ("block: add an API to atomically update queue limits")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240614090345.655716-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that the zone resource limits of a zoned block device are
correct by checking that:
(a) If the device has a max active zones limit, make sure that the max
open zones limit is lower than the max active zones limit.
(b) If the device has zone resource limits, check that the limits
values are lower than the number of sequential zones of the device.
If it is not, assume that the zoned device has no limits by setting
the limits to 0.
For (a), a check is added to blk_validate_zoned_limits() and an error
returned if the max open zones limit exceeds the value of the max active
zone limit (if there is one).
For (b), given that we need the number of sequential zones of the zoned
device, this check is added to disk_update_zone_resources(). This is
safe to do as that function is executed with the disk queue frozen and
the check executed after queue_limits_start_update() which takes the
queue limits lock. Of note is that the early return in this function
for zoned devices that do not use zone write plugging (e.g. DM devices
using native zone append) is moved to after the new check and adjustment
of the zone resource limits so that the check applies to any zoned
device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20240611023639.89277-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the integrity information into the queue limits so that it can be
set atomically with other queue limits, and that the sysfs changes to
the read_verify and write_generate flags are properly synchronized.
This also allows to provide a more useful helper to stack the integrity
fields, although it still is separate from the main stacking function
as not all stackable devices want to inherit the integrity settings.
Even with that it greatly simplifies the code in md and dm.
Note that the integrity field is moved as-is into the queue limits.
While there are good arguments for removing the separate blk_integrity
structure, this would cause a lot of churn and might better be done at a
later time if desired. However the integrity field in the queue_limits
structure is now unconditional so that various ifdefs can be avoided or
replaced with IS_ENABLED(). Given that tiny size of it that seems like
a worthwhile trade off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A few drivers optimistically try to support discard, write zeroes and
secure erase and disable the features from the I/O completion handler
if the hardware can't support them. This disable can't be done using
the atomic queue limits API because the I/O completion handlers can't
take sleeping locks or freeze the queue. Keep the existing clearing
of the relevant field to zero, but replace the old blk_queue_max_*
APIs with new disable APIs that force the value to 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove all APIs that are unused now that sd and sr have been converted
to the atomic queue limits API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The soft max_sectors limit is normally capped by the hardware limits and
an arbitrary upper limit enforced by the kernel, but can be modified by
the user. A few drivers want to increase this limit (nbd, rbd) or
adjust it up or down based on hardware capabilities (sd).
Change blk_validate_limits to default max_sectors to the optimal I/O
size, or upgrade it to the preferred minimal I/O size if that is
larger than the kernel default if no optimal I/O size is provided based
on the logic in the SD driver.
This keeps the existing kernel default for drivers that do not provide
an io_opt or very big io_min value, but picks a much more useful
default for those who provide these hints, and allows to remove the
hacks to set the user max_sectors limit in nbd, rbd and sd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The logical block size need to be smaller than the max_hw_sector
setting, otherwise we can't even transfer a single LBA.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The max_user_sectors is one of the three factors determining the actual
max_sectors limit for READ/WRITE requests. Because of that it needs to
be stacked at least for the device mapper multi-path case where requests
are directly inserted on the lower device. For SCSI disks this is
important because the sd driver actually sets it's own advisory limit
that is lower than max_hw_sectors based on the block limits VPD page.
While this is a bit odd an unusual, the same effect can happen if a
user or udev script tweaks the value manually.
Fixes: 4f563a6473 ("block: add a max_user_discard_sectors queue limit")
Reported-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240523182618.602003-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers. The remaining patches are assorted minor fixes and
deprecated function updates plus a bit of constification.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZkOnWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYe7AP93XRN/
xnccJbSTTUL4FFGobq2CYXv58Na+FM/b/+/kEAD+PNi0LmHDdDTOaFUblMd9l4lj
mpvYLRvJ6ifnHX6WXAg=
=PVnL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
-----BEGIN PGP SIGNATURE-----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=HnjE
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
For devices with virt_boundary limit, the driver may provide zero max
segment size, we have to set it as UINT_MAX at default. Otherwise, it
may cause warning in driver when handling sglist.
Fix it by setting default max segment size as UINT_MAX.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@kernel.org>
Fixes: b561ea56a2 ("block: allow device to have both virt_boundary_mask and max segment size")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-block/7e38b67c-9372-a42d-41eb-abdce33d3372@linux-m68k.org/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240424134722.2584284-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only elevator feature ever implemented is ELEVATOR_F_ZBD_SEQ_WRITE
for signaling that a scheduler implements zone write locking to tightly
control the dispatching order of write operations to zoned block
devices. With the removal of zone write locking support in mq-deadline
and the reliance of all block device drivers on the block layer zone
write plugging to control ordering of write operations to zones, the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE is completely unused.
Remove it, and also remove the now unused code for filtering the
possible schedulers for a block device based on required features.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-23-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding a generic zone append emulation using zone
write plugging, allow device drivers supporting zoned block device to
set a the max_zone_append_sectors queue limit of a device to 0 to
indicate the lack of native support for zone append operations and that
the block layer should emulate these operations using regular write
operations.
blk_queue_max_zone_append_sectors() is modified to allow passing 0 as
the max_zone_append_sectors argument. The function
queue_max_zone_append_sectors() is also modified to ensure that the
minimum of the max_hw_sectors and chunk_sectors limit is used whenever
the max_zone_append_sectors limit is 0. This minimum is consistent with
the value set for the max_zone_append_sectors limit by the function
blk_validate_zoned_limits() when limits for a queue are validated.
The helper functions queue_emulates_zone_append() and
bdev_emulates_zone_append() are added to test if a queue (or block
device) emulates zone append operations.
In order for blk_revalidate_disk_zones() to accept zoned block devices
relying on zone append emulation, the direct check to the
max_zone_append_sectors queue limit of the disk is replaced by a check
using the value returned by queue_max_zone_append_sectors(). Similarly,
queue_zone_append_max_show() is modified to use the same accessor so
that the sysfs attribute advertizes the non-zero limit that will be
used, regardless if it is for native or emulated commands.
For stacking drivers, a top device should not need to care if the
underlying devices have native or emulated zone append operations.
blk_stack_limits() is thus modified to set the top device
max_zone_append_sectors limit using the new accessor
queue_limits_max_zone_append_sectors(). queue_max_zone_append_sectors()
is modified to use this function as well. Stacking drivers that require
zone append emulation, e.g. dm-crypt, can still request this feature by
calling blk_queue_max_zone_append_sectors() with a 0 limit.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-10-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-24-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We already cap down the actual max_sectors to the max of the hardware
and user limit, so don't reject the configuration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240326060745.2349154-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 8e0ef41286.
It's broken, and causes the boot to fail on encrypted volumes.
Reported-and-bisected-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/20240311235023.GA1205@cmpxchg.org/
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
disk_stack_limits is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-12-hch@lst.de
Use queue_limits_set which validates the limits and takes care of
updating the readahead settings instead of directly assigning them to
the queue. For that make sure all limits are actually updated before
the assignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240228225653.947152-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a small wrapper around blk_stack_limits that allows passing a bdev
for the bottom device and prints an error in case of misaligned
device. The name fits into the new queue limits API and the intent is
to eventually replace disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240228225653.947152-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a small wrapper around queue_limits_commit_update for stacking
drivers that don't want to update existing limits, but set an
entirely new set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240228225653.947152-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Device mapper may create a non-zoned mapped device out of a zoned device
(e.g., the dm-zoned target). In such case, some queue limit such as the
max_zone_append_sectors and zone_write_granularity endup being non zero
values for a block device that is not zoned. Avoid this by clearing
these limits in blk_stack_limits() when the stacked zoned limit is
false.
Fixes: 3093a47972 ("block: inherit the zoned characteristics in blk_stack_limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't set the default max_segment_size value when a virt_boundary is
used.
Fixes: d690cb8ae1 ("block: add an API to atomically update queue limits")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240221125010.3609444-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new max_user_discard_sectors limit that mirrors max_user_sectors
and stores the value that the user manually set. This now allows
updates of the max_hw_discard_sectors to not worry about the user
limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new queue_limits_{start,commit}_update pair of functions that
allows taking an atomic snapshot of queue limits, update it, and
commit it if it passes validity checking. Also use the low-level
validation helper to implement blk_set_default_limits instead of
duplicating the initialization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_set_stacking_limits uses very little from blk_set_default_limits.
Open code these initializations in preparation for rewriting
blk_set_default_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a blk_apply_bdi_limits limits helper that can be used with
an explicit queue_limits argument, which will be useful later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Discarding less than a physical block doesn't make sense. This fixes
the existing behavior for zram before the recent changes to default
the discard granularity to the logical block size, and is also a
generally useful sanity check.
Fixes: 3753039def ("zram: use the default discard granularity")
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240103081622.508754-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current the discard granularity defaults to 0 and must be initialized by
any driver that wants to support discard. Default to the sector size
instead, which is the smallest possible value, and a very useful default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231228075545.362768-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
