In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
VAS is a hardware engine stays on the chip. So when the partition
migrates, all VAS windows on the source system have to be closed
and reopen them on the destination after migration.
The kernel has to consider both DLPAR CPU and migration events to
take action on VAS windows. So using VAS_WIN_NO_CRED_CLOSE and
VAS_WIN_MIGRATE_CLOSE status bits and windows will be reopened
after migration only after both status bits are cleared.
This patch make changes to the current reconfig_open/close_windows
functions to support migration:
- Set VAS_WIN_MIGRATE_CLOSE to the window status when closes and
reopen windows with the same status during resume.
- Continue to close all windows even if deallocate HCALL failed
(should not happen) since no way to stop migration with the
current LPM implementation.
- If the DLPAR CPU event happens while migration is in progress,
set VAS_WIN_NO_CRED_CLOSE to the window status. Close window
happens with the first event (migration or DLPAR) and Reopen
window happens only with the last event (migration or DLPAR).
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0aad580387cb58379496b4cbbd7c5596e9ea70be.camel@linux.ibm.com
The hypervisor assigns vas credits (windows) for each LPAR based
on the number of cores configured in that system. The OS is
expected to release credits when cores are removed, and may
allocate more when cores are added. So there is a possibility of
using excessive credits (windows) in the LPAR and the hypervisor
expects the system to close the excessive windows so that NX load
can be equally distributed across all LPARs in the system.
When the OS closes the excessive windows in the hypervisor,
it sets the window status inactive and invalidates window
virtual address mapping. The user space receives paste instruction
failure if any NX requests are issued on the inactive window.
Then the user space can use with the available open windows or
retry NX requests until this window active again.
This patch also adds the notifier for core removal/add to close
windows in the hypervisor if the system lost credits (core
removal) and reopen windows in the hypervisor when the previously
lost credits are available.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/108928f9c00a48cc6a722315d482d07cf66acf5a.camel@linux.ibm.com
The user space opens VAS windows and issues NX requests by pasting
CRB on the corresponding paste address mmap. When the system lost
credits due to core removal, the kernel has to close the window in
the hypervisor and make the window inactive by unmapping this paste
address. Also the OS has to handle NX request page faults if the user
space issue NX requests.
This handler maps the new paste address with the same VMA when the
window is active again (due to core add with DLPAR). Otherwise
returns paste failure.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3956e1c1fdfde69127055ff1c0256c7d71104030.camel@linux.ibm.com
This patch adds VAS window allocatioa/close with the corresponding
hcalls. Also changes to integrate with the existing user space VAS
API and provide register/unregister functions to NX pseries driver.
The driver register function is used to create the user space
interface (/dev/crypto/nx-gzip) and unregister to remove this entry.
The user space process opens this device node and makes an ioctl
to allocate VAS window. The close interface is used to deallocate
window.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e8d956bace3f182c4d2e66e343ff37cb0391d1fd.camel@linux.ibm.com
This patch adds hcalls and other definitions. Also define structs
that are used in VAS implementation on PowerVM.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b4b8c594c27ee4aa6be9dc6dc4ee7331571cbbe8.camel@linux.ibm.com
Many elements in vas_struct are used on PowerNV and PowerVM
platforms. vas_window is used for both TX and RX windows on
PowerNV and for TX windows on PowerVM. So some elements are
specific to these platforms.
So this patch defines common vas_window and platform
specific window structs (pnv_vas_window on PowerNV). Also adds
the corresponding changes in PowerNV vas code.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1698c35c158dfe52c6d2166667823d3d4a463353.camel@linux.ibm.com
If a coprocessor encounters an error translating an address, the
VAS will cause an interrupt in the host. The kernel processes
the fault by updating CSB. This functionality is same for both
powerNV and pseries. So this patch moves these functions to
common vas-api.c and the actual functionality is not changed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bf8d5b0770fa1ef5cba88c96580caa08d999d3b5.camel@linux.ibm.com
Take pid and mm references when each window opens and drops during
close. This functionality is needed for powerNV and pseries. So
this patch defines the existing code as functions in common book3s
platform vas-api.c
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fa40df962250a737c804e58202924717b39e381.camel@linux.ibm.com
PowerNV uses registers to open/close VAS windows, and getting the
paste address. Whereas the hypervisor calls are used on PowerVM.
This patch adds the platform specific user space window operations
and register with the common VAS user space interface.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f85091f4ace67f951ac04d60394d67b21e2f5d3c.camel@linux.ibm.com
powerNV and pseries drivers register / unregister to the corresponding
platform specific VAS separately. Then these VAS functions call the
common API with the specific window operations. So rename powerNV VAS
API register/unregister functions.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9db00d58dbdcb7cfc07a1df95f3d2a9e3e5d746a.camel@linux.ibm.com
The pseries platform will share vas and nx code and interfaces
with the PowerNV platform, so create the
arch/powerpc/platforms/book3s/ directory and move VAS API code
there. Functionality is not changed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e05c8db17b9eabe3545b902d034238e4c6c08180.camel@linux.ibm.com
When window is opened, pid reference is taken for user space
windows. Not needed for kernel windows. So remove 'pid' in
vas_tx_win_attr struct.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587114674.2275.1132.camel@hbabu-laptop
On power9, userspace can send GZIP compression requests directly to NX
once kernel establishes NX channel / window with VAS. This patch provides
user space API which allows user space to establish channel using open
VAS_TX_WIN_OPEN ioctl, mmap and close operations.
Each window corresponds to file descriptor and application can open
multiple windows. After the window is opened, VAS_TX_WIN_OPEN icoctl to
open a window on specific VAS instance, mmap() system call to map
the hardware address of engine's request queue into the application's
virtual address space.
Then the application can then submit one or more requests to the the
engine by using the copy/paste instructions and pasting the CRBs to
the virtual address (aka paste_address) returned by mmap().
Only NX GZIP coprocessor type is supported right now and allow GZIP
engine access via /dev/crypto/nx-gzip device node.
Thanks to Michael Ellerman for his changes and suggestions to make the
ioctl generic to support any coprocessor type.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587114121.2275.1109.camel@hbabu-laptop
Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well
as some other functions only used by drivers that haven't (yet?) made it
upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf record -e
mem: ...) which could lead to register corruption and kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc
when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to use gas
macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to:
Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater,
Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig,
Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R.
Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg
Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria,
Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun
Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung
Bauermann, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=3dBZ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
as well as some other functions only used by drivers that haven't
(yet?) made it upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf
record -e mem: ...) which could lead to register corruption and
kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
vmalloc when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to
use gas macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
Jitindar Singh, Thiago Jung Bauermann, YueHaibing"
* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
powerpc/eeh: Handle hugepages in ioremap space
ocxl: Update for AFU descriptor template version 1.1
powerpc/boot: pass CONFIG options in a simpler and more robust way
powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
powerpc/module64: Use symbolic instructions names.
powerpc/module32: Use symbolic instructions names.
powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
powerpc/boot: Add lzo support for uImage
powerpc/boot: Add lzma support for uImage
powerpc/boot: don't force gzipped uImage
powerpc/8xx: Add microcode patch to move SMC parameter RAM.
powerpc/8xx: Use IO accessors in microcode programming.
powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
powerpc/8xx: refactor programming of microcode CPM params.
powerpc/8xx: refactor printing of microcode patch name.
powerpc/8xx: Refactor microcode write
powerpc/8xx: refactor writing of CPM microcode arrays
...
These two function have never been used anywhere in the kernel tree
since they were added to the kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define an interface to return a system-wide unique id for a given VAS
window.
The vas_win_id() will be used in a follow-on patch to generate an unique
handle for a user space receive window. Applications can use this handle
to pair send and receive windows for fast thread-wakeup.
The hardware refers to this system-wide unique id as a Partition Send
Window ID which is expected to be used during fault handling. Hence the
"pswid" in the function names.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define an interface that the NX drivers can use to find the physical
paste address of a send window. This interface is expected to be used
with the mmap() operation of the NX driver's device. i.e the user space
process can use driver's mmap() operation to map the send window's paste
address into their address space and then use copy and paste instructions
to submit the CRBs to the NX engine.
Note that kernel drivers will use vas_paste_crb() directly and don't need
this interface.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define a helper, chip_to_vas_id() to map a given chip id to corresponding
vas id.
Normally, callers of vas_rx_win_open() and vas_tx_win_open() want the VAS
window to be on the same chip where the calling thread is executing. These
callers can pass in -1 for the VAS id.
This interface will be useful if a thread running on one chip wants to open
a window on another chip (like the NX-842 driver does during start up).
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define interfaces (wrappers) to the 'copy' and 'paste'
instructions (which are new in PowerISA 3.0). These are intended to be
used to by NX driver(s) to submit Coprocessor Request Blocks (CRBs) to
the NX hardware engines.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define an interface to open a VAS send window. This interface is
intended to be used the Nest Accelerator (NX) driver(s) to open
a send window and use it to submit compression/encryption requests
to a VAS receive window.
The receive window, identified by the [vasid, cop] parameters, must
already be open in VAS (i.e connected to an NX engine).
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define the vas_win_close() interface which should be used to close a
send or receive windows.
While the hardware configurations required to open send and receive
windows differ, the configuration to close a window is the same for
both. So we use a single interface to close the window.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define the vas_rx_win_open() interface. This interface is intended to
be used by the Nest Accelerator (NX) driver(s) to setup receive
windows for one or more NX engines (which implement compression &
encryption algorithms in the hardware).
Follow-on patches will provide an interface to close the window and to
open a send window that kernel subsystems can use to access the NX
engines.
The interface to open a receive window is expected to be invoked for
each instance of VAS in the system.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the GET_FIELD and SET_FIELD macros to vas.h as VAS and other
users of VAS, including NX-842 can use those macros.
There is a lot of related code between the VAS/NX kernel drivers
and skiboot. For consistency, switch the order of parameters in
SET_FIELD to match the order in skiboot.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define macros for the VAS hardware registers and bit-fields as well
as couple of data structures needed by the VAS driver.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[mpe: Fixup include guard to use _ASM_POWERPC_VAS_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
