* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
x86, apic: Enable lapic nmi watchdog on AMD Family 11h
x86: Remove unnecessary mdelay() from cpu_disable_common()
x86, ioapic: Document another case when level irq is seen as an edge
x86, ioapic: Fix the EOI register detection mechanism
x86, io-apic: Move the effort of clearing remoteIRR explicitly before migrating the irq
x86: SGI UV: Map low MMR ranges
x86: apic: Print out SRAT table APIC id in hex
x86: Re-get cfg_new in case reuse/move irq_desc
x86: apic: Remove not needed #ifdef
x86: io-apic: IO-APIC MMIO should not fail on resource insertion
x86: Remove asm/apicnum.h
x86: apic: Do not use stacked physid_mask_t
x86, apic: Get rid of apicid_to_cpu_present assign on 64-bit
x86, ioapic: Use snrpintf while set names for IO-APIC resourses
x86, apic: Use PAGE_SIZE instead of numbers
x86: Remove local_irq_enable()/local_irq_disable() in fixup_irqs()
x86: Use EOI register in io-apic on intel platforms
x86: Force irq complete move during cpu offline
x86: Remove move_cleanup_count from irq_cfg
x86, intr-remap: Avoid irq_chip mask/unmask in fixup_irqs() for intr-remapping
...
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (40 commits)
tracing: Separate raw syscall from syscall tracer
ring-buffer-benchmark: Add parameters to set produce/consumer priorities
tracing, function tracer: Clean up strstrip() usage
ring-buffer benchmark: Run producer/consumer threads at nice +19
tracing: Remove the stale include/trace/power.h
tracing: Only print objcopy version warning once from recordmcount
tracing: Prevent build warning: 'ftrace_graph_buf' defined but not used
ring-buffer: Move access to commit_page up into function used
tracing: do not disable interrupts for trace_clock_local
ring-buffer: Add multiple iterations between benchmark timestamps
kprobes: Sanitize struct kretprobe_instance allocations
tracing: Fix to use __always_unused attribute
compiler: Introduce __always_unused
tracing: Exit with error if a weak function is used in recordmcount.pl
tracing: Move conditional into update_funcs() in recordmcount.pl
tracing: Add regex for weak functions in recordmcount.pl
tracing: Move mcount section search to front of loop in recordmcount.pl
tracing: Fix objcopy revision check in recordmcount.pl
tracing: Check absolute path of input file in recordmcount.pl
tracing: Correct the check for number of arguments in recordmcount.pl
...
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
x86, Calgary IOMMU quirk: Find nearest matching Calgary while walking up the PCI tree
x86/amd-iommu: Remove amd_iommu_pd_table
x86/amd-iommu: Move reset_iommu_command_buffer out of locked code
x86/amd-iommu: Cleanup DTE flushing code
x86/amd-iommu: Introduce iommu_flush_device() function
x86/amd-iommu: Cleanup attach/detach_device code
x86/amd-iommu: Keep devices per domain in a list
x86/amd-iommu: Add device bind reference counting
x86/amd-iommu: Use dev->arch->iommu to store iommu related information
x86/amd-iommu: Remove support for domain sharing
x86/amd-iommu: Rearrange dma_ops related functions
x86/amd-iommu: Move some pte allocation functions in the right section
x86/amd-iommu: Remove iommu parameter from dma_ops_domain_alloc
x86/amd-iommu: Use get_device_id and check_device where appropriate
x86/amd-iommu: Move find_protection_domain to helper functions
x86/amd-iommu: Simplify get_device_resources()
x86/amd-iommu: Let domain_for_device handle aliases
x86/amd-iommu: Remove iommu specific handling from dma_ops path
x86/amd-iommu: Remove iommu parameter from __(un)map_single
x86/amd-iommu: Make alloc_new_range aware of multiple IOMMUs
...
The x86 lapic nmi watchdog does not recognize AMD Family 11h,
resulting in:
NMI watchdog: CPU not supported
As far as I can see from available documentation (the BKDM),
family 11h looks identical to family 10h as far as the PMU
is concerned.
Extending the check to accept family 11h results in:
Testing NMI watchdog ... OK.
I've been running with this change on a Turion X2 Ultra ZM-82
laptop for a couple of weeks now without problems.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
LKML-Reference: <19223.53436.931768.278021@pilspetsen.it.uu.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On a multi-node x3950M2 system, there's a slight oddity in the
PCI device tree for all secondary nodes:
30:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
\-33:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
\-34:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
...as compared to the primary node:
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
\-01:00.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
\-04:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
In both nodes, the LSI RAID controller hangs off a CalIOC2
device, but on the secondary nodes, the BIOS hides the VGA
device and substitutes the device tree ending with the disk
controller.
It would seem that Calgary devices don't necessarily appear at
the top of the PCI tree, which means that the current code to
find the Calgary IOMMU that goes with a particular device is
buggy.
Rather than walk all the way to the top of the PCI
device tree and try to match bus number with Calgary descriptor,
the code needs to examine each parent of the particular device;
if it encounters a Calgary with a matching bus number, simply
use that.
Otherwise, we BUG() when the bus number of the Calgary doesn't
match the bus number of whatever's at the top of the device tree.
Extra note: This patch appears to work correctly for the x3950
that came before the x3950 M2.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jon D. Mason <jdmason@kudzu.us>
Cc: Corinna Schultz <coschult@us.ibm.com>
Cc: <stable@kernel.org>
LKML-Reference: <20091202230556.GG10295@tux1.beaverton.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fixup_irqs() already has a mdelay(). Remove the extra and
unnecessary mdelay() from cpu_disable_common().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233335.232177348@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the case when cpu goes offline, fixup_irqs() will forward any
unhandled interrupt on the offlined cpu to the new cpu
destination that is handling the corresponding interrupt. This
interrupt forwarding is done via IPI's. Hence, in this case also
level-triggered io-apic interrupt will be seen as an edge
interrupt in the cpu's APIC IRR.
Document this scenario in the code which handles this case by doing
an explicit EOI to the io-apic to clear remote IRR of the io-apic RTE.
Requested-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233335.143970505@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Maciej W. Rozycki reported:
> 82093AA I/O APIC has its version set to 0x11 and it
> does not support the EOI register. Similarly I/O APICs
> integrated into the 82379AB south bridge and the 82374EB/SB
> EISA component.
IO-APIC versions below 0x20 don't support EOI register.
Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
version as 0x2. This is an error with documentation and these
ICH chips use io-apic's of version 0x20 and indeed has a working
EOI register for the io-apic.
Fix the EOI register detection mechanism to check for version
0x20 and beyond.
And also, a platform can potentially have io-apic's with
different versions. Make the EOI register check per io-apic.
Reported-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233335.065361533@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When the level-triggered interrupt is seen as an edge interrupt,
we try to clear the remoteIRR explicitly (using either an
io-apic eoi register when present or through the idea of
changing trigger mode of the io-apic RTE to edge and then back
to level). But this explicit try also needs to happen before we
try to migrate the irq. Otherwise irq migration attempt will
fail anyhow, as it postpones the irq migration to a later
attempt when it sees the remoteIRR in the io-apic RTE still set.
Signed-off-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233334.975416130@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we disable a breakpoint through dr7, we unregister it right
away, making us lose track of its corresponding address
register value.
It means that the following sequence would be unsupported:
- set address in dr0
- enable it through dr7
- disable it through dr7
- enable it through dr7
because we lost the address register value when we disabled the
breakpoint.
Don't unregister the disabled breakpoints but rather disable
them.
Reported-by: "K.Prasad" <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259735536-9236-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The data that was stored in this table is now available in
dev->archdata.iommu. So this table is not longer necessary.
This patch removes the remaining uses of that variable and
removes it from the code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch removes the ugly contruct where the
iommu->lock must be released while before calling the
reset_iommu_command_buffer function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch cleans up the code to flush device table entries
in the IOMMU. With this chance the driver can get rid of the
iommu_queue_inv_dev_entry() function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds a function to flush a DTE entry for a given
struct device and replaces iommu_queue_inv_dev_entry calls
with this function where appropriate.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch cleans up the attach_device and detach_device
paths and fixes reference counting while at it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch introduces a list to each protection domain which
keeps all devices associated with the domain. This can be
used later to optimize certain functions and to completly
remove the amd_iommu_pd_table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds a reference count to each device to count
how often the device was bound to that domain. This is
important for single devices that act as an alias for a
number of others. These devices must stay bound to their
domains until all devices that alias to it are unbound from
the same domain.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch changes IOMMU code to use dev->archdata->iommu to
store information about the alias device and the domain the
device is attached to.
This allows the driver to get rid of the amd_iommu_pd_table
in the future.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch makes device isolation mandatory and removes
support for the amd_iommu=share option. This simplifies the
code in several places.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch rearranges two dma_ops related functions so that
their forward declarations are not longer necessary.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch moves alloc_pte() and fetch_pte() into the page
table handling code section so that the forward declarations
for them could be removed.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The logic of these two functions is reimplemented (at least
in parts) in places in the code. This patch removes these
code duplications and uses the functions instead. As a side
effect it moves check_device() to the helper function code
section.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This is a helper function and when its placed in the helper
function section we can remove its forward declaration.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
With the previous changes the get_device_resources function
can be simplified even more. The only important information
for the callers is the protection domain.
This patch renames the function to get_domain() and let it
only return the protection domain for a device.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If there is no domain associated to a device yet and the
device has an alias device which already has a domain, the
original device needs to have the same domain as the alias
device.
This patch changes domain_for_device to handle this
situation and directly assigns the alias device domain to
the device in this situation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
With the prior changes this parameter is not longer
required. This patch removes it from the function and all
callers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Since the assumption that an dma_ops domain is only bound to
one IOMMU was given up we need to make alloc_new_range aware
of it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Every call-place of get_device_resources calls check_device
before it. So call it from get_device_resources directly and
simplify the code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The check_device logic needs to include the dma_supported
checks to be really sure. Merge the dma_supported logic into
check_device and use it to implement dma_supported.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The non-present cache flag was IOMMU local until now which
doesn't make sense. Make this a global flag so we can remove
the lase user of 'struct iommu' in the map/unmap path.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch reimplements the function
flush_all_domains_on_iommu to use the global protection
domain list.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch reimplementes the amd_iommu_flush_all_domains
function to use the global protection domain list instead
of flushing every domain on every IOMMU.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds code to keep a global list of all protection
domains. This allows to simplify the resume code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This iommu_flush_tlb_pde function does essentially the same.
So the iommu_flush_domain function is redundant and can be
removed.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch extends the iommu_flush_pages function to flush
the TLB entries on all IOMMUs the domain has devices on.
This basically gives up the former assumption that dma_ops
domains are only bound to one IOMMU in the system.
For dma_ops domains this is still true but not for
IOMMU-API managed domains. Giving this assumption up for
dma_ops domains too allows code simplification.
Further it splits out the main logic into a generic function
which can be used by iommu_flush_tlb too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds a function to the AMD IOMMU driver which
completes all queued commands an all IOMMUs a specific
domain has devices attached on. This is required in a later
patch when per-domain flushing is implemented.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds reference counting for protection domains
per IOMMU. This allows a smarter TLB flushing strategy.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds an index field to struct amd_iommu which can
be used to lookup it up in an array. This index will be used
in struct protection_domain to keep track which protection
domain has devices behind which IOMMU.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch updates the copyright headers in the relevant AMD
IOMMU driver files to match the date of the latest changes.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch moves all function declarations which are only
used inside the driver code to a seperate header file.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In-kernel user breakpoints are created using functions in which
we pass breakpoint parameters as individual variables: address,
length and type.
Although it fits well for x86, this just does not scale across
archictectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Explicitly mmap the UV chipset MMR address ranges used to
access blade-local registers. Although these same MMRs are also
mmaped at higher addresses, the low range is more
convenient when accessing blade-local registers.
The low range addresses always alias to the local blade
regardless of the blade id.
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20091125162018.GA25445@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mce_disable_cpu() and mce_reenable_cpu() are called only
from mce_cpu_callback() which is marked as __cpuinit.
So these functions can be __cpuinit too.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4B0E3C4E.4090809@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we schedule out a breakpoint from the cpu, we also
incidentally remove the "Global exact breakpoint" flag from the
breakpoint control register. It makes us losing the fine grained
precision about the origin of the instructions that may trigger
breakpoint exceptions for the other breakpoints running in this
cpu.
Reported-by: Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259211878-6013-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
