1
Commit Graph

45372 Commits

Author SHA1 Message Date
Alan Stern
9da82bd464 USB: implement "soft" unbinding
This patch (as1091) changes the way usbcore handles interface
unbinding.  If the interface's driver supports "soft" unbinding (a new
flag in the driver structure) then in-flight URBs are not cancelled
and endpoints are not disabled.  Instead the driver is allowed to
continue communicating with the device (although of course it should
stop before its disconnect routine returns).

The purpose of this change is to allow drivers to do a clean shutdown
when they get unbound from a device that is still plugged in.  Killing
all the URBs and disabling the endpoints before calling the driver's
disconnect method doesn't give the driver any control over what
happens, and it can leave devices in indeterminate states.  For
example, when usb-storage unbinds it doesn't want to stop while in the
middle of transmitting a SCSI command.

The soft_unbind flag is added because in the past, a number of drivers
have experienced problems related to ongoing I/O after their disconnect
routine returned.  Hence "soft" unbinding is made available only to
drivers that claim to support it.

The patch also replaces "interface_to_usbdev(intf)" with "udev" in a
couple of places, a minor simplification.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:54 -07:00
Adrian Bunk
473bca94ba USB: isp1760-hcd.c: make 2 functions static
This patch makes the following needlessly global functions static:
- enqueue_an_ATL_packet()
- enqueue_an_INT_packet()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:54 -07:00
Alan Stern
7119e3c37f usb-storage: change remaining semaphore to completion
This patch (as1090) converts the one remaining semaphore in
usb-storage into a completion.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:53 -07:00
Alan Stern
7e4d6c3879 usb-storage: separate dynamic flags from fixed flags
This patch (as1089) separates out the dynamic atomic bitflags and the
static bitfields in usb-storage.  Until now the two sorts of flags
have been sharing the same word; this has always been awkward.

To help prevent possible confusion, the two new fields each have a
different name from the original.  us->fflags contains the fixed
bitfields (mostly taken from the USB ID table in unusual_devs.h), and
us->dflags contains the dynamic atomic bitflags (used with set_bit,
test_bit, and so on).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:53 -07:00
Alan Cox
2742fd8899 USB: io_ti: FIrst cut at a big clean up
Sort out the insane naming like "OperationalFirmwareVersion" which seems
	designed to cause formatting problems and RSI
Merge various common code together
Clean up the pointlessly complex and spread about MCR handling

This is really just the low hanging fruit.

Needs lots of testing before it goes upstream so testers and reports
appreciated

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:53 -07:00
Alan Stern
4330354f76 USB: combine hub_quiesce and hub_stop
This patch (as1083) combines hub_quiesce() and hub_stop() into a
single routine.  There's no point keeping them separate since they are
usually called together.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:52 -07:00
Alan Stern
f2835219ed USB: combine hub_activate and hub_restart
This patch (as1071) combines hub_activate() and hub_restart() into a
single routine.  There's no point keeping them separate, since they
are always called together.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:52 -07:00
Alan Stern
948fea37dc USB: optimize port debouncing during hub activation
This patch (as1082) makes a small optimization to the way the hub
driver carries out port debouncing immediately after a hub is
activated (i.e., initialized, reset, or resumed).  If any port-change
statuses are observed, the code will delay for a minimal debounce
period -- thereby making a good start at debouncing all the ports at
once.

If this wasn't sufficient then khubd will debounce any port that still
requires attention.  But in most cases it should suffice; it's rare
for a device to need more than a minimal debounce delay.  (In the
cases of hub initialization or reset even that is most likely not
needed, since any devices plugged in at such times have probably been
attached for a while.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:52 -07:00
Alan Stern
8808f00c7a USB: try to salvage lost power sessions
This patch (as1073) adds to khubd a way to recover from power-session
interruption caused by transient connect-change or enable-change
events.  After the debouncing period, khubd attempts to do a
USB-Persist-style reset or reset-resume.  If it works, the connection
will remain unscathed.

The upshot is that we will be more immune to noise caused by EMI.  The
grace period is on the order of 100 ms, so this won't permit recovery
from the "accidentally knocked the USB cable out of its socket" type
of event, but it's a start.

As an added bonus, if a device was suspended when the system goes to
sleep then we no longer need to check for power-session interruptions
when the system wakes up.  Khubd will naturally see the status change
while processing the device's parent hub and will do the right thing.

The remote_wakeup() routine is changed; now it expects the caller to
acquire the device lock rather than acquiring the lock itself.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:51 -07:00
Alan Stern
6ee0b270c7 USB: simplify hub_restart() logic
This patch (as1081) straightens out the logic of the hub_restart()
routine.  Each port of the hub is scanned and the driver makes sure
that ports which are supposed to be disabled really _are_ disabled.
Any ports with a significant change in status are flagged in
hub->change_bits, so that khubd can focus on them without the need to
scan all the ports a second time -- which means the hub->activating
flag is no longer needed.

Also, it is now recognized explicitly that the only reason for
resuming a port which was not suspended is to carry out a reset-resume
operation, which happens only in a non-CONFIG_USB_SUSPEND setting.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:50 -07:00
Greg Kroah-Hartman
9e5eace734 USB: revert "don't use reset-resume if drivers don't support it"
This reverts Linus's previous patch that is in mainline to make it
easier for the USB hub.c patches that follow this to apply cleanly.  The
functionality will be added back in a followon patch in this series.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:48 -07:00
Alan Stern
24618b0cd4 USB: debounce before unregistering
This patch (as1080) makes a significant change to the way khubd
handles port connect-change and enable-change events.  Both types of
event are now debounced, and the debouncing is carried out _before_ an
existing usb_device is unregistered, instead of afterward.

This means that drivers will have to deal with longer runs of errors
when a device is unplugged, but they are supposed to be prepared for
that in any case.

The advantage is that when an enable-change occurs (caused for example
by electromagnetic interference), the debouncing period will provide
time for the cause of the problem to die away.  A simple port reset
(added in a forthcoming patch) will then allow us to recover from the
fault.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:47 -07:00
Alan Stern
b01b03f3ad USB: add new routine for checking port-resume type
This patch (as1070) creates a new subroutine to check whether a device
can be resumed.  This code is needed even when CONFIG_USB_SUSPEND
isn't set, because devices do suspend themselves when the root hub
(and hence the entire bus) is suspended, and power sessions can get
lost during a system sleep even without individual port suspends.

The patch also fixes a loose end in USB-Persist reset-resume handling.
When a low- or full-speed device is attached to an EHCI's companion
controller, the port handoff during resume will cause the companion
port's connect-status-change feature to be set.  If that flag isn't
cleared, the port-reset code will think it indicates that the device
has been unplugged and the reset-resume will fail.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:47 -07:00
Harvey Harrison
bd2c784595 USB: use get_unaligned_* helpers for kl5kusb105 driver
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:47 -07:00
Kay Sievers
0031a06e2f USB: usb dev_set_name() instead of dev->bus_id
The bus_id field is going away, use the dev_set_name() function
to set it properly.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:47 -07:00
Kay Sievers
7071a3ce0c USB: usb dev_name() instead of dev->bus_id
The bus_id field is going away, use the dev_name() function instead.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:46 -07:00
Greg Kroah-Hartman
36aa81172e USB: revert "don't lose disconnections during suspend"
This reverts Alan's previous patch so that the recent Hub changes will
apply cleanly.  The above mentioned patch was needed for 2.6.26 to work
properly.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:46 -07:00
Greg Kroah-Hartman
1b26da1510 USB: handle pci_name() being const
This changes usb_create_hcd() to be able to handle the fact that
pci_name() has changed to a constant string.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:46 -07:00
Andrew Lunn
c5e46007e9 USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:46 -07:00
Linus Torvalds
e89970aa93 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netfilter: nf_conntrack_sctp: fix sparse warnings
  netfilter: nf_nat_sip: c= is optional for session
  netfilter: xt_TCPMSS: collapse tcpmss_reverse_mtu{4,6} into one function
  netfilter: nfnetlink_log: send complete hardware header
  netfilter: xt_time: fix time's time_mt()'s use of do_div()
  netfilter: accounting rework: ct_extend + 64bit counters (v4)
  netlink: add NLA_PUT_BE64 macro
  netfilter: nf_nat_core: eliminate useless find_appropriate_src for IP_NAT_RANGE_PROTO_RANDOM
  hdlcdrv: Fix CRC calculation.
  Revert "pkt_sched: Make default qdisc nonshared-multiqueue safe."
  net: In __netif_schedule() use WARN_ON instead of BUG_ON
  net: Improve simple_tx_hash().
  pkt_sched: Remove unused variable skb in dev_deactivate_queue function.
  sunhme: Remove stop/wake TX queue calls in set-multicast-list handler.
  ucc_geth: do not touch net queue in adjust_link phylib callback
  gianfar: do not touch net queue in adjust_link phylib callback
  atl1: Do not wake queue before queue has been started.
2008-07-21 11:29:52 -07:00
Randy Dunlap
443bd1c4dd pci kernel-doc fatal error
Fix kernel-doc comments so that they don't produce errors.
Also cut some extraneous copy-paste text.

Error(linhead//drivers/pci/pci.c:1133): duplicate section name 'Description'
Error(linhead//drivers/pci/pci.c:1189): duplicate section name 'Description'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21 10:43:26 -07:00
Linus Torvalds
72a73693aa Merge branch 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (160 commits)
  x86: remove extra calling to get ext cpuid level
  x86: use setup_clear_cpu_cap() when disabling the lapic
  KVM: fix exception entry / build bug, on 64-bit
  x86: add unknown_nmi_panic kernel parameter
  x86, VisWS: turn into generic arch, eliminate leftover files
  x86: add ->pre_time_init to x86_quirks
  x86: extend and use x86_quirks to clean up NUMAQ code
  x86: introduce x86_quirks
  x86: improve debug printout: add target bootmem range in early_res_to_bootmem()
  Subject: devmem, x86: fix rename of CONFIG_NONPROMISC_DEVMEM
  x86: remove arch_get_ram_range
  x86: Add a debugfs interface to dump PAT memtype
  x86: Add a arch directory for x86 under debugfs
  x86: i386: reduce boot fixmap space
  i386/xen: add proper unwind annotations to xen_sysenter_target
  x86: reduce force_mwait visibility
  x86: reduce forbid_dac's visibility
  x86: fix two modpost warnings
  x86: check function status in EDD boot code
  x86_64: ia32_signal.c: remove signal number conversion
  ...
2008-07-21 10:34:25 -07:00
Linus Torvalds
b7e6f62fe2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm crypt: add merge
  dm table: remove merge_bvec sector restriction
  dm: linear add merge
  dm: introduce merge_bvec_fn
  dm snapshot: use per device mempools
  dm snapshot: fix race during exception creation
  dm snapshot: track snapshot reads
  dm mpath: fix test for reinstate_path
  dm mpath: return parameter error
  dm io: remove struct padding
  dm log: make dm_dirty_log init and exit static
  dm mpath: free path selector on invalid args
2008-07-21 10:30:10 -07:00
Linus Torvalds
8a392625b6 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md: (52 commits)
  md: Protect access to mddev->disks list using RCU
  md: only count actual openers as access which prevent a 'stop'
  md: linear: Make array_size sector-based and rename it to array_sectors.
  md: Make mddev->array_size sector-based.
  md: Make super_type->rdev_size_change() take sector-based sizes.
  md: Fix check for overlapping devices.
  md: Tidy up rdev_size_store a bit:
  md: Remove some unused macros.
  md: Turn rdev->sb_offset into a sector-based quantity.
  md: Make calc_dev_sboffset() return a sector count.
  md: Replace calc_dev_size() by calc_num_sectors().
  md: Make update_size() take the number of sectors.
  md: Better control of when do_md_stop is allowed to stop the array.
  md: get_disk_info(): Don't convert between signed and unsigned and back.
  md: Simplify restart_array().
  md: alloc_disk_sb(): Return proper error value.
  md: Simplify sb_equal().
  md: Simplify uuid_equal().
  md: sb_equal(): Fix misleading printk.
  md: Fix a typo in the comment to cmd_match().
  ...
2008-07-21 10:29:12 -07:00
Linus Torvalds
519f0141f1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits)
  Input: add switch for dock events
  Input: add microphone insert switch definition
  Input: i8042 - add Arima-Rioworks HDAMB board to noloop list
  Input: sgi_btns - add support for SGI Indy volume buttons
  Input: add option to disable HP SDC driver
  Input: serio - trivial documentation fix
  Input: add new serio driver for Xilinx XPS PS2 IP
  Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreen
  Input: new driver for SGI O2 volume buttons
  Input: yealink - reliably kill urbs
  Input: q40kbd - make q40kbd_lock static
  Input: gtco - eliminate early return
  Input: i8042 - add Dritek quirk for Acer Aspire 5720
  Input: usbtouchscreen - ignore eGalax screens supporting HID protocol
  Input: i8042 - add Medion NAM 2070 to noloop blacklist
  Input: i8042 - add Gericom Bellagio to nomux blacklist
  Input: i8042 - add Acer Aspire 1360 to nomux blacklist
  Input: hp_sdc_mlc.c - make a struct static
  Input: hil_mlc.c - make code static
  Input: wistron - generate normal key event if bluetooth or wifi not present
  ...
2008-07-21 10:27:31 -07:00
Micah Dowty
ae6134bdf3 hdlcdrv: Fix CRC calculation.
This is a trivial patch against the hdlcdrv module that fixes its CRC
calculation. The finished CRC was overwriting the first two bytes of
each packet rather than being appended to the end.

I've tested this with 2.6.8 and 2.6.10-rc1, but hdlcdrv hasn't changed
much recently so it should work with many other kernel versions.

Signed-off-by: Micah Dowty <micah@navi.cx>
Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21 10:10:56 -07:00
Linus Torvalds
f8b71a3a92 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: (44 commits)
  sparc: Remove Sparc's asm-offsets for sclow.S
  sparc64: Update defconfig.
  sparc64: Add Niagara2 RNG driver.
  sparc64: Add missing hypervisor service group numbers.
  sparc64: Remove 4MB and 512K base page size options.
  sparc64: Convert to generic helpers for IPI function calls.
  sparc: Use new '%pS' infrastructure to print symbols.
  sparc32: fix init.c allnoconfig build error
  sparc64: Config category "Processor type and features" absent
  sparc: arch/sparc/kernel/apc.c to unlocked_ioctl
  sparc: join the remaining header files
  sparc: merge header files with trivial differences
  sparc: when header files are equal use asm-sparc version
  sparc: copy sparc64 specific files to asm-sparc
  sparc: Merge asm-sparc{,64}/asi.h
  sparc: export openprom.h to userspace
  sparc: Merge asm-sparc{,64}/types.h
  sparc: Merge asm-sparc{,64}/termios.h
  sparc: Merge asm-sparc{,64}/termbits.h
  sparc: Merge asm-sparc{,64}/setup.h
  ...
2008-07-21 09:40:26 -07:00
Wang Chen
42a77a1b8f Fix istallion build failure
Commits b02f5ad6a3 ("istallion: use
tty_port") and a352def21a ("tty: Ldisc
revamp") broke the istallion driver.

Fix the compile error and silence a warning.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21 09:39:15 -07:00
David S. Miller
fd24c4af6e sunhme: Remove stop/wake TX queue calls in set-multicast-list handler.
Based upon a bug report by Alexander Beregalov and commentary
from Ben Hutchings.

These are totally unnecessary, in particular because this
driver's ->hard_start_xmit() handler takes the same driver
spinlock that the set-multicast-list handler uses.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21 08:34:49 -07:00
Anton Vorontsov
ebbdbd7c02 ucc_geth: do not touch net queue in adjust_link phylib callback
If the net queue has not been started, we'll get this nice oops
and non-working ethernet:

------------[ cut here ]------------
Kernel BUG at c01f4648 [verbose debug info unavailable]
Oops: Exception in kernel mode, sig: 5 [#1]
MPC836x RDK
Modules linked in:
NIP: c01f4648 LR: c01c0a10 CTR: c01c08e4
REGS: cf839e40 TRAP: 0700   Not tainted  (2.6.26-05254-gc7b9969)
MSR: 00021032 <ME,IR,DR>  CR: 22042044  XER: 00000000
TASK = cf828c30[4] 'events/0' THREAD: cf838000
GPR00: c01c0a10 cf839ef0 cf828c30 c035ceb0 cf8469a0 00000064 00000000 00000000
GPR08: c035ceb0 00000001 00000001 cf99c280 22044044 7ca81020 0fffc000 00000000
GPR16: 0fff2544 0fff63c0 00000000 0fff78e0 0ffa5580 00000004 00000000 00000000
GPR24: 02082000 cf9d0000 d1068000 00009032 cf846800 cf846b80 00000001 00000014
NIP [c01f4648] __netif_schedule+0x28/0x8c
LR [c01c0a10] adjust_link+0x12c/0x1e4
Call Trace:
[cf839ef0] [c0380f50] 0xc0380f50 (unreliable)
[cf839f10] [c01c0a10] adjust_link+0x12c/0x1e4
[cf839f40] [c01c2628] phy_state_machine+0x2e0/0x448
[cf839f60] [c00425e8] run_workqueue+0xc8/0x168
[cf839f90] [c0042c6c] worker_thread+0x70/0xd0
[cf839fd0] [c0046954] kthread+0x48/0x84
[cf839ff0] [c0012488] kernel_thread+0x44/0x60
Instruction dump:
7c0803a6 4e800020 3d20c036 9421ffe0 7c0802a6 7c681b78 3929ceb0 7c694a78
7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028
---[ end trace a57d367843bd2904 ]---

Since the driver is using phylib (which is doing netif_carrier_on/off()),
we should simply remove netif_tx_schedule_all() from adjust_link().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21 08:30:36 -07:00
Anton Vorontsov
afc079465e gianfar: do not touch net queue in adjust_link phylib callback
If the net queue has not been started, we'll get this nice oops
and non-working ethernet:

PHY: 0:01 - Link is Up - 1000/Full
------------[ cut here ]------------
kernel BUG at net/core/dev.c:1328!
Oops: Exception in kernel mode, sig: 5 [#1]
MPC837x RDB
Modules linked in:
NIP: c02544a0 LR: c01a17d0 CTR: c01a16ac
REGS: cf837e40 TRAP: 0700   Not tainted  (2.6.26-05253-g14b395e)
MSR: 00021032 <ME,IR,DR>  CR: 22042044  XER: 00000000
TASK = cf819400[5] 'events/0' THREAD: cf836000
GPR00: c01a17d0 cf837ef0 cf819400 c03d8d08 cf8469a0 00000064 00000000 00000000
GPR08: c03d8d08 00000001 00000001 cf899ba0 22044044 00000000 0fffd000 00000000
GPR16: 0fff3028 0fff6cf0 00000000 0fff8390 0ff494a0 00000004 00000000 00000000
GPR24: c0361a00 00001058 cf9f6600 00009032 cf846800 cf846b80 00000001 00000014
NIP [c02544a0] __netif_schedule+0x28/0x8c
LR [c01a17d0] adjust_link+0x124/0x1cc
Call Trace:
[cf837ef0] [c03fb3a0] 0xc03fb3a0 (unreliable)
[cf837f10] [c01a17d0] adjust_link+0x124/0x1cc
[cf837f40] [c01a8e28] phy_state_machine+0x2e0/0x448
[cf837f60] [c0040254] run_workqueue+0xc8/0x168
[cf837f90] [c00408d8] worker_thread+0x70/0xd0
[cf837fd0] [c0044630] kthread+0x48/0x84
[cf837ff0] [c0012610] kernel_thread+0x44/0x60
Instruction dump:
7c0803a6 4e800020 3d20c03e 9421ffe0 7c0802a6 7c681b78 39298d08 7c694a78
7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028
---[ end trace 13dfd73ee42d0c30 ]---

Since the driver is using phylib (which is doing netif_carrier_on/off()),
we should simply remove netif_tx_schedule_all() from adjust_link().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21 08:29:54 -07:00
David S. Miller
39d48157ac atl1: Do not wake queue before queue has been started.
Based upon a bug report by Alexey Dobriyan, the patch is
also tested by him and confirmed to fix the problem.

Packet flow during link state events should not be done by
waking and stopping the TX queue anyways, that is handled
transparently by netif_carrier_{on,off}().

So, remove the netif_{wake,stop}_queue() calls in the link
check code, and add the necessary netif_start_queue() call
to atl1_up().

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21 08:28:37 -07:00
Ingo Molnar
2e2dcc7631 Merge branch 'x86/paravirt-spinlocks' into x86/for-linus 2008-07-21 16:45:56 +02:00
Ingo Molnar
acee709cab Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', 'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus 2008-07-21 16:37:17 +02:00
Ingo Molnar
e66d90fb4a Merge branch 'linus' into xen-64bit 2008-07-21 15:06:09 +02:00
Ingo Molnar
1c29dd9a9e Merge branch 'linus' into x86/paravirt-spinlocks 2008-07-21 15:05:58 +02:00
Milan Broz
d41e26b901 dm crypt: add merge
This patch implements biovec merge function for crypt target.

If the underlying device has merge function defined, call it.
If not, keep precomputed value.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:40 +01:00
Milan Broz
9980c638a6 dm table: remove merge_bvec sector restriction
Remove max_sector restriction - merge function replaced it.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:39 +01:00
Milan Broz
7bc3447b69 dm: linear add merge
This patch implements biovec merge function for linear target.

If the underlying device has merge function defined, call it.
If not, keep precomputed value.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:38 +01:00
Milan Broz
f6fccb1213 dm: introduce merge_bvec_fn
Introduce a bvec merge function for device mapper devices
for dynamic size restrictions.

This code ensures the requested biovec lies within a single
target and then calls a target-specific function to check
against any constraints imposed by underlying devices.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:37 +01:00
Mikulas Patocka
92e868122e dm snapshot: use per device mempools
Change snapshot per-module mempool to per-device mempool.

Per-module mempools could cause a deadlock if multiple
snapshot devices are stacked above each other.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:35 +01:00
Mikulas Patocka
a8d41b59f3 dm snapshot: fix race during exception creation
Fix a race condition that returns incorrect data when a write causes an
exception to be allocated whilst a read is still in flight.

The race condition happens as follows:
* A read to non-reallocated sector in the snapshot is submitted so that the
  read is routed to the original device.
* A write to the original device is submitted. The write causes an exception
  that reallocates the block.  The write proceeds.
* The original read is dequeued and reads the wrong data.

This race can be triggered with CFQ scheduler and one thread writing and
multiple threads reading simultaneously.

(This patch relies upon the earlier dm-kcopyd-per-device.patch to avoid a
deadlock.)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:34 +01:00
Mikulas Patocka
cd45daffd1 dm snapshot: track snapshot reads
Whenever a snapshot read gets mapped through to the origin, track it in
a per-snapshot hash table indexed by chunk number, using memory allocated
from a new per-snapshot mempool.

We need to track these reads to avoid race conditions which will be fixed
by patches that follow.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:32 +01:00
Alasdair G Kergon
def052d21c dm mpath: fix test for reinstate_path
Fix test for reinstate_path method before attempting to use it.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Julia Lawall <julia@diku.dk>
2008-07-21 12:00:31 +01:00
Mikulas Patocka
148acff615 dm mpath: return parameter error
Return a specific error message if there are an invalid number of multipath
arguments.

This invalid command returns an "Unknown error" because the ti->error field is
not set

dmsetup create --table '0 2 multipath 0 0 1 1 round-robin 0 1 1 /dev/sdh' mpath0

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:30 +01:00
Richard Kennedy
6ae2fa6718 dm io: remove struct padding
Rearrange struct dm_io.
Shrinks size from 40 -> 32 allowing more objects/slab.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:28 +01:00
Adrian Bunk
c8da2f8dd8 dm log: make dm_dirty_log init and exit static
dm_dirty_log_{init,exit}() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:27 +01:00
Mikulas Patocka
371b2e348b dm mpath: free path selector on invalid args
Free path selector if the arguments are invalid.

This command (note that it is invalid) causes reference leak on module
"dm_round_robin" and prevents the module from being removed.

dmsetup create --table '0 2 multipath 0 0 1 1 round-robin /dev/sdh' mpath0

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:24 +01:00
Ingo Molnar
e27772b48d Merge branch 'linus' into x86/urgent 2008-07-21 11:02:45 +02:00
NeilBrown
4b80991c6c md: Protect access to mddev->disks list using RCU
All modifications and most access to the mddev->disks list are made
under the reconfig_mutex lock.  However there are three places where
the list is walked without any locking.  If a reconfig happens at this
time, havoc (and oops) can ensue.

So use RCU to protect these accesses:
  - wrap them in rcu_read_{,un}lock()
  - use list_for_each_entry_rcu
  - add to the list with list_add_rcu
  - delete from the list with list_del_rcu
  - delay the 'free' with call_rcu rather than schedule_work

Note that export_rdev did a list_del_init on this list.  In almost all
cases the entry was not in the list anymore so it was a no-op and so
safe.  It is no longer safe as after list_del_rcu we may not touch
the list_head.
An audit shows that export_rdev is called:
  - after unbind_rdev_from_array, in which case the delete has
     already been done,
  - after bind_rdev_to_array fails, in which case the delete isn't needed.
  - before the device has been put on a list at all (e.g. in
      add_new_disk where reading the superblock fails).
  - and in autorun devices after a failure when the device is on a
      different list.

So remove the list_del_init call from export_rdev, and add it back
immediately before the called to export_rdev for that last case.

Note also that ->same_set is sometimes used for lists other than
mddev->list (e.g. candidates).  In these cases rcu is not needed.

Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:25 +10:00