Clean up: NSM's XDR data structures are used only in fs/lockd/mon.c,
so move them there.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Make sure any error returned by rpc.statd during an SM_UNMON call is
reported rather than ignored completely. There isn't much to do with
such an error, but we should log it in any case.
Similar to a recent change to nsm_monitor().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up.
Make the nlm_host argument "const," and move the public declaration to
lockd.h. Add a documenting comment.
Bruce observed that nsm_unmonitor()'s only caller doesn't care about
its return code, so make nsm_unmonitor() return void.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_handle's reference count is bumped in nlm_lookup_host(). It
should be decremented in nlm_destroy_host() to make it easier to see
the balance of these two operations.
Move the nsm_release() call to fs/lockd/host.c.
The h_nsmhandle pointer is set in nlm_lookup_host(), and never cleared.
The nlm_destroy_host() function is never called for the same nlm_host
twice, so h_nsmhandle won't ever be NULL when nsm_unmonitor() is
called.
All references to the nlm_host are gone before it is freed. We can
skip making h_nsmhandle NULL just before the nlm_host is deallocated.
It's also likely we can remove the h_nsmhandle NULL check in
nlmsvc_is_client() as well, but we can do that later when rearchitect-
ing the nlm_host cache.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up.
Make the nlm_host argument "const," and move the public declaration to
lockd.h with other NSM public function (nsm_release, eg) and global
variable declarations.
Add a documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_monitor() function reports an error and does not set sm_monitored
if the SM_MON upcall reply has a non-zero result code, but nsm_monitor()
does not return an error to its caller in this case.
Since sm_monitored is not set, the upcall is retried when the next NLM
request invokes nsm_monitor(). However, that may not come for a while.
In the meantime, at least one NLM request will potentially proceed
without the peer being monitored properly.
Have nsm_monitor() return an error if the result code is non-zero.
This will cause all NLM requests to fail immediately if the upcall
completed successfully but rpc.statd returned an error.
This may be inconvenient in some cases (for example if rpc.statd
cannot complete a proper DNS reverse lookup of the hostname), but will
make the reboot monitoring service more robust by forcing such issues
to be corrected by an admin.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Remove the BUG_ON() invocation in nsm_monitor(). It's not
likely that nsm_monitor() is ever called with a NULL host pointer, and
the code will die anyway if host is NULL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nsm_monitor() function already generates a printk(KERN_NOTICE) if
the SM_MON upcall fails, so the similar printk() in the nlmclnt_lock()
function is redundant.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Use the sm_name field for reporting the hostname in nsm_monitor()
and nsm_unmonitor(), just as the other functions in fs/lockd/mon.c do.
The h_name field is just a copy of the sm_name pointer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls
is a string that contains the hostname or IP address of the remote peer
to be notified when this host has rebooted. The sm-notify command uses
this identifier to contact the peer when we reboot, so it must be
either a well-qualified DNS hostname or a presentation format IP
address string.
When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM
provides a presentation format IP address in the "mon_name" argument.
Otherwise, the "caller_name" argument from NLM requests is used,
which is usually just the DNS hostname of the peer.
To support IPv6 addresses for the mon_name argument, we use the
nsm_handle's address eye-catcher, which already contains an appropriate
presentation format address string. Using the eye-catcher string
obviates the need to use a large buffer on the stack to form the
presentation address string for the upcall.
This patch also addresses a subtle bug.
An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the
same peer are required to use the same value for the "mon_name"
argument. Otherwise, rpc.statd's NSMPROC_UNMON processing cannot
locate the database entry for that peer and remove it.
If the setting of nsm_use_hostnames is changed between the time the
kernel sends an NSMPROC_MON request and the time it sends the
NSMPROC_UNMON request for the same peer, the "mon_name" argument for
these two requests may not be the same. This is because the value of
"mon_name" is currently chosen at the moment the call is made based on
the setting of nsm_use_hostnames
To ensure both requests pass identical contents in the "mon_name"
argument, we now select which string to use for the argument in the
nsm_monitor() function. A pointer to this string is saved in the
nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall.
NB: There are other potential problems, such as how nlm_host_rebooted()
might behave if nsm_use_hostnames were changed while hosts are still
being monitored. This patch does not attempt to address those
problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: make the printk(KERN_DEBUG) in nsm_mon_unmon() a dprintk,
and add another dprintk to note if creating an RPC client for the
upcall failed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Use a C99 structure initializer instead of open-coding the
initialization of nsm_args.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: introduce a helper function to generate IPv4 addresses using
the same style as the IPv6 helper function we just added.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Scope ID support is needed since the kernel's NSM implementation is
about to use these displayed addresses as a mon_name in some cases.
When nsm_use_hostnames is zero, without scope ID support NSM will fail
to handle peers that contact us via a link-local address. Link-local
addresses do not work without an interface ID, which is stored in the
sockaddr's sin6_scope_id field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
AF_UNSPEC support is no longer needed in nlm_display_address() now
that a presentation address is no longer generated for the h_srcaddr
field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The h_name field in struct nlm_host is a just copy of
h_nsmhandle->sm_name. Likewise, the contents of the h_addrbuf field
should be identical to the sm_addrbuf field.
The h_srcaddrbuf field is used only in one place for debugging. We can
live without this until we get %pI formatting for printk().
Currently these buffers are 48 bytes, but we need to support scope IDs
in IPv6 presentation addresses, which means making the buffers even
larger. Instead, let's find ways to eliminate them to save space.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The default method for calculating the number of connections allowed
per RPC service arbitrarily limits single-threaded services to 80
connections. This is too low for services like lockd and artificially
limits the number of TCP clients that it can support.
Have lockd set a default sv_maxconn value to 1024 (which is the typical
default value for RLIMIT_NOFILE. Also add a module parameter to allow an
admin to set this to an arbitrary value.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cksum.data is not freed up in one error case. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Minor cleanup/rewrite of find_stateid. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (27 commits)
GFS2: Use DEFINE_SPINLOCK
GFS2: Fix use-after-free bug on umount (try #2)
Revert "GFS2: Fix use-after-free bug on umount"
GFS2: Streamline alloc calculations for writes
GFS2: Send useful information with uevent messages
GFS2: Fix use-after-free bug on umount
GFS2: Remove ancient, unused code
GFS2: Move four functions from super.c
GFS2: Fix bug in gfs2_lock_fs_check_clean()
GFS2: Send some sensible sysfs stuff
GFS2: Kill two daemons with one patch
GFS2: Move gfs2_recoverd into recovery.c
GFS2: Fix "truncate in progress" hang
GFS2: Clean up & move gfs2_quotad
GFS2: Add more detail to debugfs glock dumps
GFS2: Banish struct gfs2_rgrpd_host
GFS2: Move rg_free from gfs2_rgrpd_host to gfs2_rgrpd
GFS2: Move rg_igeneration into struct gfs2_rgrpd
GFS2: Banish struct gfs2_dinode_host
GFS2: Move i_size from gfs2_dinode_host and rename it to i_disksize
...
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (138 commits)
ocfs2: Access the right buffer_head in ocfs2_merge_rec_left.
ocfs2: use min_t in ocfs2_quota_read()
ocfs2: remove unneeded lvb casts
ocfs2: Add xattr support checking in init_security
ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle
ocfs2: calculate and reserve credits for xattr value in mknod
ocfs2/xattr: fix credits calculation during index create
ocfs2/xattr: Always updating ctime during xattr set.
ocfs2/xattr: Remove extend_trans call and add its credits from the beginning
ocfs2/dlm: Fix race during lockres mastery
ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list
ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating
ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler()
ocfs2/dlm: Fix a race between migrate request and exit domain
ocfs2: One more hamming code optimization.
ocfs2: Another hamming code optimization.
ocfs2: Don't hand-code xor in ocfs2_hamming_encode().
ocfs2: Enable metadata checksums.
ocfs2: Validate superblock with checksum and ecc.
ocfs2: Checksum and ECC for directory blocks.
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
inotify: fix type errors in interfaces
fix breakage in reiserfs_new_inode()
fix the treatment of jfs special inodes
vfs: remove duplicate code in get_fs_type()
add a vfs_fsync helper
sys_execve and sys_uselib do not call into fsnotify
zero i_uid/i_gid on inode allocation
inode->i_op is never NULL
ntfs: don't NULL i_op
isofs check for NULL ->i_op in root directory is dead code
affs: do not zero ->i_op
kill suid bit only for regular files
vfs: lseek(fd, 0, SEEK_CUR) race condition
The problems lie in the types used for some inotify interfaces, both at the kernel level and at the glibc level. This mail addresses the kernel problem. I will follow up with some suggestions for glibc changes.
For the sys_inotify_rm_watch() interface, the type of the 'wd' argument is
currently 'u32', it should be '__s32' . That is Robert's suggestion, and
is consistent with the other declarations of watch descriptors in the
kernel source, in particular, the inotify_event structure in
include/linux/inotify.h:
struct inotify_event {
__s32 wd; /* watch descriptor */
__u32 mask; /* watch mask */
__u32 cookie; /* cookie to synchronize two events */
__u32 len; /* length (including nulls) of name */
char name[0]; /* stub for possible name */
};
The patch makes the changes needed for inotify_rm_watch().
Signed-off-by: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Robert Love <rlove@google.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
save 14 bytes:
text data bss dec hex filename
1354 32 4 1390 56e fs/filesystems.o.before
text data bss dec hex filename
1340 32 4 1376 560 fs/filesystems.o
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fsync currently has a fdatawrite/fdatawait pair around the method call,
and a mutex_lock/unlock of the inode mutex. All callers of fsync have
to duplicate this, but we have a few and most of them don't quite get
it right. This patch adds a new vfs_fsync that takes care of this.
It's a little more complicated as usual as ->fsync might get a NULL file
pointer and just a dentry from nfsd, but otherwise gets afile and we
want to take the mapping and file operations from it when it is there.
Notes on the fsync callers:
- ecryptfs wasn't calling filemap_fdatawrite / filemap_fdatawait on the
lower file
- coda wasn't calling filemap_fdatawrite / filemap_fdatawait on the host
file, and returning 0 when ->fsync was missing
- shm wasn't calling either filemap_fdatawrite / filemap_fdatawait nor
taking i_mutex. Now given that shared memory doesn't have disk
backing not doing anything in fsync seems fine and I left it out of
the vfs_fsync conversion for now, but in that case we might just
not pass it through to the lower file at all but just call the no-op
simple_sync_file directly.
[and now actually export vfs_fsync]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sys_execve and sys_uselib do not call into fsnotify so inotify does not get
open events for these types of syscalls. This patch simply makes the
requisite fsnotify calls.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and don't bother in callers. Don't bother with zeroing i_blocks,
while we are at it - it's already been zeroed.
i_mode is not worth the effort; it has no common default value.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We used to have rather schizophrenic set of checks for NULL ->i_op even
though it had been eliminated years ago. You'd need to go out of your
way to set it to NULL explicitly _and_ a bunch of code would die on
such inodes anyway. After killing two remaining places that still
did that bogosity, all that crap can go away.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
it's already set to empty table (and no, ntfs doesn't have any explicit
checks for NULL ->i_op or NULL ->i_fop)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
for one thing it never happens, for another we check that inode
is a directory right after that place anyway (and we'd already
checked that reading it from disk has not failed).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch fixes a race condition in lseek. While it is expected that
unpredictable behaviour may result while repositioning the offset of a
file descriptor concurrently with reading/writing to the same file
descriptor, this should not happen when merely *reading* the file
descriptor's offset.
Unfortunately, the only portable way in Unix to read a file
descriptor's offset is lseek(fd, 0, SEEK_CUR); however executing this
concurrently with read/write may mess up the position.
[with fixes from akpm]
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In commit "ocfs2: Use metadata-specific ocfs2_journal_access_*()
functions", the wrong buffer_head is accessed. So change it
to the right buffer_head.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
dlmglue.c has lots of code which casts the return value of ocfs2_dlm_lvb().
This is pointless however, as ocfs2_dlm_lvb() returns void *.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We must check whether ocfs2 volume support xattr in init_security,
if not support xattr and security is enable, would cause failure of mknod.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In extreme situation, may need xattr bucket for setting
security entry and acl entries during mknod. This only
happens when block size is too small.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We extend the credits for xattr's large value in set_value_outside
before, this can give rise to a credits issue when we set one security
entry and two acl entries duing mknod. As we remove extend_trans form
set_value_outside, we must calculate and reserve the credits for
xattr's large value in mknod.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When creating a xattr index block, the old calculation forget
to add credits for the meta change of the alloc file. So add
more credits and more comments to explain it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In xattr set, we should always update ctime if the operation goes
sucessfully. The old one mistakenly put it in ocfs2_xattr_set_entry
which is only called when we set xattr in inode or xattr block. The
side benefit is that it resolve the bug 1052 since in that scenario,
ocfs2_calc_xattr_set_need only calc out the xattr set credits while
ocfs2_xattr_set_entry update the inode also which isn't concerned with
the process of xattr set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Actually, when setting a new xattr value, we know it from the very
beginning, and it isn't like the extension of bucket in which case
we can't figure it out. So remove ocfs2_extend_trans in that function
and calculate it before the transaction. It also relieve acl operation
from the worry about the side effect of ocfs2_extend_trans.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
dlm_get_lock_resource() is supposed to return a lock resource with a proper
master. If multiple concurrent threads attempt to lookup the lockres for the
same lockid while the lock mastery in underway, one or more threads are likely
to return a lockres without a proper master.
This patch makes the threads wait in dlm_get_lock_resource() while the mastery
is underway, ensuring all threads return the lockres with a proper master.
This issue is known to be limited to users using the flock() syscall. For all
other fs operations, the ocfs2 dlmglue layer serializes the dlm op for each
lockid.
Users encountering this bug will see flock() return EINVAL and dmesg have the
following error:
ERROR: Dlm error "DLM_BADARGS" while calling dlmlock on resource <LOCKID>: bad api args
Reported-by: Coly Li <coyli@suse.de>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds a new lock, dlm->tracking_lock, to protect adding/removing
lockres' to/from the dlm->tracking_list. We were previously using dlm->spinlock
for the same, but that proved inadequate as we could be freeing a lockres from
a context that did not hold that lock. As the new lock only protects this list,
we can explicitly take it when removing the lockres from the tracking list.
This bug was exposed when testing multiple processes concurrently flock() the
same file.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
During lockres purge, o2dlm sends a drop reference message to the lockres
master. This patch delays the message if the lockres is being migrated.
Fixes oss bugzilla#1012
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1012
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Patch cleans printed errors in dlm_proxy_ast_handler(). The errors now includes
the node number that sent the (b)ast. Also it reduces the number of endian swaps
of the cookie.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Patch address a racing migrate request message and an exit domain message.
Instead of blocking exit domains for the duration of the migrate, we ignore
failure to deliver that message. This is because an exiting domain should
not have any active locks and thus has no role to play in the migration.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
