replace pcmcia_socket->lock and pcmcia_dev_list_lock by using the
per-socket "ops_mutex", as we do neither need different locks
nor a spinlock here.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
As a side effect,
socket_state_t socket;
u_int state;
u_int suspended_state;
are properly protected now.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
As a side effect,
io_window_t io[MAX_IO_WIN];
is explicitely protected now.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Protect the pccard_operations callback "set_mem_map" by a new
mutex ops_mutex. This mutex also protects the following values
in struct pcmcia_socket:
pccard_mem_map win[]
pccard_mem_map cis_mem
void __iomem *cis_virt
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
This fixes:
drivers/pcmcia/omap_cf.c:74:1: warning: "SZ_2K" redefined
Since
c1191b0 ([ARM] Kirkwood: create a mapping for the Security Accelerator SRAM)
SZ_2K is defined in arch/arm/include/asm/sizes.h.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
This fixes:
drivers/pcmcia/at91_cf.c:55:1: warning: "SZ_2K" redefined
Since
c1191b0 ([ARM] Kirkwood: create a mapping for the Security Accelerator SRAM)
SZ_2K is defined in arch/arm/include/asm/sizes.h.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
platform_get_irq returns -ENXIO on failure, so !irq was probably
always true. Better use irq <= 0. Note that a return value of
zero is still handled as error even though this could mean irq0.
This is a followup to 305b3228f9 that
changed the return value of platform_get_irq from 0 to -ENXIO on error.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Vrabel <dvrabel@arcom.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
O2-bridges can do read prefetch and write burst. However, for some combinations
of older bridges and cards, this causes problems, so it is disabled for those
bridges. Now, as some users know their setup works with the speedups enabled, a
new parameter is introduced to the driver. Now, a user can specifically enable
or disable these features, while the default is what we have today: detect the
bridge and decide accordingly. Fixes Bugzilla entry 15014.
Simplify and unify the printouts, fix a whitespace issue while we are here.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: frodone@gmail.com
[linux@dominikbrodowski.net: whitespace fixes]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The match_table field of the struct of_device_id is constant in <linux/of_platform.h>
so it is worth to make the initialization data also constant.
The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
With CONFIG_PCMCIA=m and CONFIG_YENTA=y, we get
drivers/built-in.o: In function `yenta_probe':
yenta_socket.c:(.devinit.text+0x1e582): undefined reference to
`pccard_nonstatic_ops'
This is because
select PCCARD_NONSTATIC if PCMCIA
sets PCCARD_NONSTATIC = min(YENTA, PCMCIA). Change it to 'if PCMCIA!=n'
to remove the upper limit.
[linux@dominikbrodowski.net: propagate change to PCMICA_M8XX]
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
If only CardBus cards are used, but not PCMCIA cards, we do not need
the extensive resource management functions provided for by
rsrc_nonstatic.c (~240K).
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Move rsrc_mgr indirections only used by the pcmcia module to the
pcmcia module.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
As PCMCIA is the only real user of CIS access functions, include
cistpl.c in the PCMCIA module, not in the PCMCIA & CardBus core
module.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The socket driver m8xx_pcmcia.c uses a static memory assignment,
but io_offset is set to 0. Therefore, it seems proper to use the
iodyn resource manager for this driver, as was previously the
case (before commit 80128ff79d).
CC: Vitaly Bordug <vitb@kernel.crashing.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
m32r_cfc sets the socket capabilities to SS_CAP_STATIC_MAP and
also sets io_offset != 0. This means no calls to
&pccard_nonstatic_ops went through. Therfore, replace it with
&pccard_static_ops which is exactly for this case.
CC: Mamoru Sakugawa <sakugawa@linux-m32r.org>
CC: Hirokazu Takata <takata@linux-m32r.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Remove rsrc_mgr indirections only used by pcmcia_resource.c
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
As release_resoure_db() used to be called only from one place, and
it's a two-line function, remove it.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Do not lock the socket driver module on card insert, as
the PCMCIA core can handle a socket module removal, at least
if we add a call to socket_remove() on pccardd()'s shutdown.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Do not lock the socket driver module in pcmcia_get_socket(), as
the PCMCIA core can handle a socket module removal: In
pcmcia_unregister_socket(), we explicitely wait for the last
put_device() to succeed.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Add a lot of documentation to the rsrc_nonstatic io memory probe
functions. Also, add a first memory probe call -- just checking
whether request_resource() succeeds -- upon adding of resources.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
As ds.c is the only real user of CIS access functions, call the
cleanup functions from ds.c, too.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
At least no in-kernel CardBus-capable PCI driver makes use of the CIS
access functions. Therefore, it seems sensible to remove this unused
code, and cleanup cardbus.c a lot.
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
During a suspend/resume cycle, an user may change the card in the
PCMCIA/CardBus slot. The pcmcia_core can at least look at the
socket state to check whether it is the same.
For PCMCIA devices, move the detection and handling of such a
change to ds.c.
For CardBus devices, the PCI hotplug interface doesn't offer a "rescan"
facility which also _removes_ devices no longer to be found behind a
bridge. Therefore, remove and re-add all devices unconditionally.
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cleanup pccard_validate_cis() and make it return an error code on
all failures, not merely on some failures.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
In pccard_validate_cis(), validate the card CIS, not the CIS cache.
Also, destroy the CIS cache if pccard_validate_cis fails.
Furthermore, do not remove the fake CIS in destroy_cis_cache() but
do so explicitely in the code paths where it makes sense.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Do not release any iomem resources already in use.
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
In runtime_resume(), do not throw away the return value of
pcmcia_dev_resume(), for we can use it (at least) in
pcmcia_store_pm_state(). This also fixes the pointless assignment
previosly seen there, as noted by Dan Carpenter.
CC: Dan Carpenter <error27@gmail.com>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI/cardbus: Add a fixup hook and fix powerpc
PCI: change PCI nomenclature in drivers/pci/ (non-comment changes)
PCI: change PCI nomenclature in drivers/pci/ (comment changes)
PCI: fix section mismatch on update_res()
PCI: add Intel 82599 Virtual Function specific reset method
PCI: add Intel USB specific reset method
PCI: support device-specific reset methods
PCI: Handle case when no pci device can provide cache line size hint
PCI/PM: Propagate wake-up enable for PCIe devices too
vgaarbiter: fix a typo in the vgaarbiter Documentation
The cardbus code creates PCI devices without ever going through the
necessary fixup bits and pieces that normal PCI devices go through.
There's in fact a commented out call to pcibios_fixup_bus() in there,
it's commented because ... it doesn't work.
I could make pcibios_fixup_bus() do the right thing on powerpc easily
but I felt it cleaner instead to provide a specific hook pci_fixup_cardbus
for which a weak empty implementation is provided by the PCI core.
This fixes cardbus on powerbooks and probably all other PowerPC
platforms which was broken completely for ever on some platforms and
since 2.6.31 on others such as PowerBooks when we made the DMA ops
mandatory (since those are setup by the fixups).
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Commit d0d26c33b6 broke the driver by
propagating a pointer to the platform_device where a pointer to the
generic device was expected, leading to a spectacular crash...
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
commit 66024db removes all other references of skt->irq by using
skt->socket.pci_irq, while leaving these two missed. Get them fixed.
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The Arcom Zeus CF slot requires the same kind of support as the Viper.
To avoid code duplication, introduce a platform device that abstracts
the differences.
This also allows for the removal of the ugly export of viper_cf_rst().
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
ERROR: "pxa2xx_drv_pcmcia_ops" [drivers/pcmcia/pxa2xx_lubbock_cs.ko] undefined!
ERROR: "pxa2xx_drv_pcmcia_add_one" [drivers/pcmcia/pxa2xx_lubbock_cs.ko] undefined!
We also remove __pxa2xx_drv_pcmcia_probe and its export, since this is
no longer required.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix several CodingStyle issues in drivers/pcmcia/ . checkpatch.pl no longer
reports errors in the PCMCIA core. The remaining warnings mostly relate to
wrong indent -- PCMCIA historically used 4 spaces --, to lines over 80
characters and to hundreds of typedefs. The cleanup of those will follow
in the future.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Jonathan Cameron reports that building PCMCIA as modules doesn't work:
As module get a load of undefined symbols:
ERROR: "soc_pcmcia_request_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_free_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_enable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_disable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_add_one" [drivers/pcmcia/pxa2xx_base.ko] undefined!
ERROR: "soc_common_pcmcia_get_timing" [drivers/pcmcia/pxa2xx_base.ko] undefined!
ERROR: "soc_pcmcia_remove_one" [drivers/pcmcia/pxa2xx_base.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
This is because soc_common tries to be built-in, but it should be a module.
Allow soc_common to be a module.
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Both iPAQs h3600 and h3100 share the same control
GPIOs for PCMCIA, so driver can be reused.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Combine both headers into one, rename to h3xxx.h and change all
users accordingly.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use of gpio_request/gpio_free in some callbacks may look ugly, but
corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet)
init/exit hooks and registering these gpios in *_mach_init is also
not possible, because htc-gpio driver starts a bit later...
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Convert all operations with GPLR/GPCR/GPSR to gpiolibs calls.
Also change all IRQ_GPIO* to gpio_to_irq(*GPIO*)
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
