asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The update_hw_blink() function prints an error message when hardware is
not able to handle a blink configuration on its own. IMHO, this isn't a
'real' error since the software fallback is used afterwards.
Remove the error messages to avoid flooding the logs with unnecessary
messages.
Cc: stable@vger.kernel.org
Fixes: 48ca7f302c ("leds: pca9532: Use PWM1 for hardware blinking")
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240826133237.134604-1-bastien.curutchet@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
With the new __counted_by annotation, the "num_leds" variable needs to
valid for accesses to the "leds" array. This requirement is not met in
gpio_leds_create(), since "num_leds" starts at "0", so "leds" index "0"
will not be considered valid (num_leds would need to be "1" to access
index "0").
Fix this by setting the allocation size after allocation, and then update
the final count based on how many were actually added to the array.
Fixes: 52cd75108a ("leds: gpio: Annotate struct gpio_leds_priv with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716212455.work.809-kees@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Simplify the code a bunch by using managed resource helpers.
Also, there is no need to save clk pointer anymore.
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Huan Yang <link@vivo.com>
Link: https://lore.kernel.org/r/20240821013725.785956-1-link@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
Drop the manual access to the fwnode of the device to iterate over its
child nodes. `device_for_each_child_node` macro provides direct access
to the child nodes, and given that the `child` variable is only required
within the loop, the scoped variant of the macro can be used.
Use the `device_for_each_child_node_scoped` macro to iterate over the
direct child nodes of the device.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240820-device_child_node_access-v3-2-1ee09bdedb9e@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-var-v1-16-1d0292802470@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
At beginning of probe() function, the driver iterates over OF children
and assigns found device node for later. The code uses
for_each_available_child_of_node() which drops the references on
children on each successful pass, thus the probe function operates later
on the device node without holding the reference.
Fix this by increasing the reference count for found child node and
drop it at the end of the probe, because it is not needed further (the
V4L init code takes its own references).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-var-v1-3-1d0292802470@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Replace msleep() with usleep_range() in sun50i_a100_ledc_suspend()
to address the checkpatch.pl warning. msleep() for such short delay
can lead to inaccurate sleep times. Switch to usleep_range()
provide more precise delay.
Fix the following warning from checkpatch.pl:
WARNING: msleep < 20ms can sleep for up to 20ms;
see Documentation/timers/timers-howto.rst
+ msleep(1);
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20240816171129.6411-1-abhishektamboli9@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
With CONFIG_LEDS_CLASS_MULTICOLOR=m, a builtin leds-blinkm driver causes
a link failure:
arm-linux-gnueabi-ld: drivers/leds/leds-blinkm.o: in function `blinkm_set_mc_brightness':
leds-blinkm.c:(.text.blinkm_set_mc_brightness+0xc): undefined reference to `led_mc_calc_color_components'
Add a more specific dependency that only allows multicoler mode to
be enabled for blinkm if it can build and link.
Fixes: 56e8c56c9a ("leds: Add multicolor support to BlinkM LED driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Joseph Strauss <jstrauss@mailbox.org>
Link: https://lore.kernel.org/r/20240807075614.2118068-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The current implementation accesses the `child` fwnode handle outside of
device_for_each_child_node() without incrementing its refcount.
Add the missing call to `fwnode_handle_get(child)`.
The cleanup process where `child` is accessed is not right either
because a single call to `fwnode_handle_put()` is carried out in case of
an error, ignoring unasigned nodes at the point when the error happens.
Keep `child` inside of the first loop, and use the helper pointer that
receives references via `fwnode_handle_get()` to handle the child nodes
within the second loop. Keeping `child` inside the first node has also
the advantage that the scoped version of the loop can be used.
Fixes: ee4e80b296 ("leds: pca995x: Add support for PCA995X chips")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240807-leds-pca995x-fix-fwnode-usage-v1-1-8057c84dc583@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
Use `device_for_each_child_node()` to indicate device's direct child
nodes.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240805-device_for_each_child_node-available-v3-2-48243a4aa5c0@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
LED controller should be reset during initialization to avoid abnormal
behaviors. For example, when power to SoC is recycled but power to LED
controller is not, LED controller should not presume to be in original
state.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20240801153048.3813581-1-zenghuchen@google.com
Signed-off-by: Lee Jones <lee@kernel.org>
The flash module has status bits to indicate different thermal
conditions which are called as OTSTx. For each OTSTx status,
there is a recommended total flash current for all channels to
prevent the flash module entering into higher thermal level.
For example, the total flash current should be limited to 1000mA/500mA
respectively when the HW reaches the OTST1/OTST2 thermal level.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/20240705-qcom_flash_thermal_derating-v3-1-8e2e2783e3a6@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
In this case, the child nodes are not required outside the loop, and
the scoped version of the macro can be used to remove the repetitive
`goto put` pattern.
Use `device_for_each_child_node_scoped_scoped()` to indicate device's
direct child nodes.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240721-device_for_each_child_node-available-v2-4-f33748fd8b2d@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The current implementation accesses the `child` fwnode handle outside of
fwnode_for_each_available_child_node() without incrementing its
refcount. Add the missing call to `fwnode_handle_get(child)`.
The cleanup process where `child` is accessed is not right either
because a single call to `fwnode_handle_put()` is carried out in case of
an error, ignoring unasigned nodes at the point when the error happens.
Keep `child` inside of the first loop, and use the helper pointer that
receives references via `fwnode_handle_get()` to handle the child nodes
within the second loop.
Moreover, the iterated nodes are direct children of the device node,
and the `device_for_each_child_node()` macro accounts for child node
availability. By restricting `child` to live within that loop, the
scoped version of it can be used to simplify the error handling.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
Use `device_for_each_child_node_scoped()` to indicate device's direct
child nodes.
Fixes: 8325642d27 ("leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240721-device_for_each_child_node-available-v2-3-f33748fd8b2d@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for PCA9956B chip, which belongs to the same family.
This chip features 24 instead of 16 outputs, so add a chipdef struct to
deal with the different register layouts.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pieterjan Camerlynck <pieterjanca@gmail.com>
Link: https://lore.kernel.org/r/20240711-pca995x-v4-2-702a67148065@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add multicolor support to the BlinkM driver, making it easier to control
from userspace. The BlinkM LED is a programmable RGB LED. The driver
currently supports only the regular LED sysfs class, resulting in the
creation of three distinct classes, one for red, green, and blue. The
user then has to input three values into the three seperate brightness
files within those classes. The multicolor LED framework makes the
device easier to control with the multi_intensity file: the user can
input three values at once to form a color, while still controlling the
lightness with the brightness file.
The main struct blinkm_led has changed slightly. The struct led_classdev
for the regular sysfs classes remain. The blinkm_probe function checks
CONFIG_LEDS_BLINKM_MULTICOLOR to decide whether to load the seperate
sysfs classes or the single multicolor one, but never both. The
blinkm_set_mc_brightness() function had to be added to calculate the
three color components and then set the fields of the blinkm_data
structure accordingly.
Signed-off-by: Joseph Strauss <jstrauss@mailbox.org>
Link: https://lore.kernel.org/r/20240710184844.108006-1-jstrauss@mailbox.org
Signed-off-by: Lee Jones <lee@kernel.org>
This patch provides support for enabling blinking of LEDs when RX or TX
errors are detected.
Approach taken in this patch is similar to one for TX or RX data
transmission indication (i.e. TRIGGER_NETDEV_TX/RX attribute).
One can inspect transmission errors with:
ip -s link show eth0
Example LED configuration:
cd /sys/devices/platform/amba_pl@0/a001a000.leds/leds/
echo netdev > mode:blue/trigger && \
echo eth0 > mode:blue/device_name && \
echo 1 > mode:blue/tx_err
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240710100651.4059887-1-lukma@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
The torch_current_max should be checked not exceeding the upper bound.
If it does, throw a warning message and set to LM3601X_MAX_TORCH_I_UA.
LM3601x torch brigthness register (LM3601X_LED_TORCH_REG) takes 0 as the
minimum output (2.4 mA). However, 0 of led_brightness means LED_OFF.
Adding a -1 offset to brightness before writing to brightness
register, so when users write minimum brightness (1), it sets lm3601x
output the minimum.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20240704191500.766846-1-zenghuchen@google.com
Signed-off-by: Lee Jones <lee@kernel.org>
- Add new Trigger for Input Events
- Add new led_mc_set_brightness() call to adapt colour/brightness for mutli-colour LEDs
- Add new lled_mc_trigger_event() call to call the above based on given trigger conditions
- Add new led_get_color_name() call, a wrapper around the existing led_colors[] array
- Add a new flag to avoid automatic renaming of LED devices
- New Drivers
- Add support for Silergy SY7802 Flash LED Controller
- Add support for Texas Instruments LP5569 LED Controller
- Add support for ChromeOS EC LED Controller
- New Device Support
- Add support for KTD202{6,7} to Kinetic KTD2026/7 LEDs
- Fix-ups
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Use generic platform device properties instead of OF/ACPI specific ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
- Bug Fixes
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error handling routines
- Repair locking issue causing circular dependency splats and lock-ups
- Unregister sysfs entries before deactivating triggers to prevent use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW triggers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmaWgMEACgkQUa+KL4f8
d2Glng//Sw3+ev7IFn4PmNfMHtKeWlJEerT8kyF0GdK05zn7ImlydkSVW5RvHN8B
J2A8cfXXkhggYoG2i4zjs1wtfPDXP9iJMhVaRnPPuWgYJpPrhUFSSkJKiauSKyGN
Tp3Vn6QaHM5Gs/THUidcTV0+USE6j9+DXdLjLASAi2YXqoGCC3KWcq4Hb6NdGM/Q
ajEuGnrO1HEF0dOaEgkYuNIXcADHzeeQlU0Y96bGv7qnUBw7LAIpH+AC1d49jcXS
gIJNxmtmn0QqCK0/lS74DmR9r2quofeYer6G5WDJVv72R8KIljFN16AGFLdC8ID/
3B4JnjQKpEyn344gmvqzx23dp3jqvCupgDcojR6RY7yIZTXSjg0R0OocKYQlDnNY
LoNZqZ9J2nNDWNlx7r7PXuIAm7Bb9kdY0/PWgXOwWsEb19DcxyAHE3+xGeyQF6f5
/s1bGZxQyfBnDZm8+XiJ6KTsiZ1t0MljG9y7xil6vtzJIJTynao9qzZipcrx7UuT
3UyoGa/Z4o95OkQye9n6tKGJJDKLJIZL7x4pGOW3HeHgfvJ1koyHr8WwhmK4Zoh/
xeHfHABuaMoulTsuGjtnRP4/UWOTEf2hh7FK1mSrpxSCvv+I9W4lTO9QBkXU8xuD
1oCekcTYWOwKhxaFX4jjaGEHXIWYzXDjE7hqroLzj8Ifhqe9xrc=
=0Kyu
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- New trigger for Input Events
- New led_mc_set_brightness() call to adapt colour/brightness for
mutli-colour LEDs
- New lled_mc_trigger_event() call to call the above based on given
trigger conditions
- New led_get_color_name() call, a wrapper around the existing
led_colors[] array
- A new flag to avoid automatic renaming of LED devices
New Drivers:
- Silergy SY7802 Flash LED Controller
- Texas Instruments LP5569 LED Controller
- ChromeOS EC LED Controller
New Device Support:
- KTD202{6,7} support for Kinetic KTD2026/7 LEDs
Fix-ups:
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity and
avoid duplication
- Use generic platform device properties instead of OF/ACPI specific
ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
Bug Fixes:
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error
handling routines
- Repair locking issue causing circular dependency splats and
lock-ups
- Unregister sysfs entries before deactivating triggers to prevent
use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW
triggers"
* tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (65 commits)
leds: leds-lp5569: Enable chip after chip configuration
leds: leds-lp5569: Better handle enabling clock internal setting
leds: leds-lp5569: Fix typo in driver name
leds: flash: leds-qcom-flash: Test the correct variable in init
leds: leds-lp55xx: Convert mutex lock/unlock to guard API
leds: leds-lp5523: Convert to sysfs_emit API
leds: leds-lp5569: Convert to sysfs_emit API
Revert "leds: led-core: Fix refcount leak in of_led_get()"
leds: leds-lp5569: Add support for Texas Instruments LP5569
leds: leds-lp55xx: Drop deprecated defines
leds: leds-lp55xx: Support ENGINE program up to 128 bytes
leds: leds-lp55xx: Generalize sysfs master_fader
leds: leds-lp55xx: Generalize sysfs engine_leds
leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
leds: leds-lp55xx: Generalize stop_engine function
leds: leds-lp55xx: Generalize turn_off_channels function
leds: leds-lp55xx: Generalize set_led_current function
leds: leds-lp55xx: Generalize multicolor_brightness function
leds: leds-lp55xx: Generalize led_brightness function
leds: leds-lp55xx: Generalize firmware_loaded function
...
- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
Documentation say that clock internal config needs to be set BEFORE chip
is enabled. Align code to this and move the CHIP enable after the CHIP
is configured.
While at it also make use of STATUS reg and check when STARTUP is
completed instead of sleep for 1-2 ms.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-3-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Better handle enabling clock internal setting. In further testing it was
notice that internal clock config MUST be set before clock output config
or the LED CHIP might stop working.
This wasn't documented and was actually found on devices that have 2
chip chained where one chip provide clock for the other.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-2-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This code was passing the incorrect pointer to PTR_ERR_OR_ZERO() so it
always returned success. It should have been checking the array element
instead of the array itself.
Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZoWJS_epjIMCYITg@stanley.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
Convert any entry of mutex lock/unlock to guard API and simplify code.
With the use of guard API, handling for selttest functions can be
greatly simplified.
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626221520.2846-3-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert sprintf to the much safer sysfs_emit API to handle output for
sysfs.
Also better handle situation where on the same chip there may be LED
open and shorted at the same time.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626221520.2846-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This reverts commit da1afe8e60.
Commit 699a8c7c4b ("leds: Add of_led_get() and led_put()"), introduced in
5.5, added of_led_get() and led_put() but missed a put_device() in
led_put(), thus creating a leak in case the consumer device is removed.
Arguably device removal was not very popular, so this went apparently
unnoticed until 2022. In January 2023 two different patches got merged to
fix the same bug:
- commit da1afe8e60 ("leds: led-core: Fix refcount leak in of_led_get()")
- commit 445110941e ("leds: led-class: Add missing put_device() to led_put()")
They fix the bug in two different ways, which creates no patch conflicts,
and both were merged in v6.2. The result is that now there is one more
put_device() than get_device()s, instead of one less.
Arguably device removal is not very popular yet, so this apparently hasn't
been noticed as well up to now. But it blew up here while I'm working with
device tree overlay insertion and removal. The symptom is an apparently
unrelated list of oopses on device removal, with reasons:
kernfs: can not remove 'uevent', no directory
kernfs: can not remove 'brightness', no directory
kernfs: can not remove 'max_brightness', no directory
...
Here sysfs fails removing attribute files, which is because the device name
changed and so the sysfs path. This is because the device name string got
corrupted, which is because it got freed too early and its memory reused.
Different symptoms could appear in different use cases.
Fix by removing one of the two fixes.
The choice was to remove commit da1afe8e60 because:
* it is calling put_device() inside of_led_get() just after getting the
device, thus it is basically not refcounting the LED device at all
during its entire lifetime
* it does not add a corresponding put_device() in led_get(), so it fixes
only the OF case
The other fix (445110941e) is adding the put_device() in led_put() so it
covers the entire lifetime, and it works even in the non-DT case.
Fixes: da1afe8e60 ("leds: led-core: Fix refcount leak in of_led_get()")
Co-developed-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240625-led-class-device-leak-v2-1-75fdccf47421@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for Texas Instruments LP5569 LED driver.
Texas Instruments LP5569 is 9 channels chip with programmable engines.
It almost a copy of LP5523 with fundamental changes to regs order and
regs content.
Has difference in how the clock is handled and doesn't support detecting
clock time automatically, different handling for selftest and different
scheme for the status regs.
LED chip supports ENGINE and MUX to group LED and run precompiled code
with magic values to run patterns. This is loaded via the sysfs entry
and it's passed as a string of ASCII HEX char.
One some devices using this LED Controller (a NBG7815 Router) it was
found loading big precompiled pattern with up to 96 bytes of code. To
have support for this "extended" scenario, hardcode each engine to
support 4 pages of precompiled pattern (128 bytes of code) and 1 page
for each MUX. This gives plenty of space for any kind precompiled
pattern keeping simple logic for page handling of each engine and mux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-21-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Some LED chip supports up to 16 pages and with some magic they can be
divided in 4 page for each ENGINE + 1 for each MUX. Following this we
can support bigger programs up to 128 bytes.
Rework the update_program_memory function to support program of multiple
pages instead of hardcoding it to one page per programs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-19-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
