1
Commit Graph

16 Commits

Author SHA1 Message Date
Josef Bacik
1dfc3220d9 jbd2: fix possible journal overflow issues
There are several cases where the running transaction can get buffers
added to its BJ_Metadata list which it never dirtied, which makes its
t_nr_buffers counter end up larger than its t_outstanding_credits
counter.

This will cause issues when starting new transactions as while we are
logging buffers we decrement t_outstanding_buffers, so when
t_outstanding_buffers goes negative, we will report that we need less
space in the journal than we actually need, so transactions will be
started even though there may not be enough room for them.  In the worst
case scenario (which admittedly is almost impossible to reproduce) this
will result in the journal running out of space.

The fix is to only refile buffers from the committing transaction to the
running transactions BJ_Modified list when b_modified is set on that
journal, which is the only way to be sure if the running transaction has
modified that buffer.

This patch also fixes an accounting error in journal_forget, it is
possible that we can call journal_forget on a buffer without having
modified it, only gotten write access to it, so instead of freeing a
credit, we only do so if the buffer was modified.  The assert will help
catch if this problem occurs.  Without these two patches I could hit
this assert within minutes of running postmark, with them this issue no
longer arises.

Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Josef Bacik
9fc7c63a1d jbd2: fix the way the b_modified flag is cleared
Currently at the start of a journal commit we loop through all of the buffers
on the committing transaction and clear the b_modified flag (the flag that is
set when a transaction modifies the buffer) under the j_list_lock.

The problem is that everywhere else this flag is modified only under the jbd2
lock buffer flag, so it will race with a running transaction who could
potentially set it, and have it unset by the committing transaction.

This is also a big waste, you can have several thousands of buffers that you
are clearing the modified flag on when you may not need to.  This patch
removes this code and instead clears the b_modified flag upon entering
do_get_write_access/journal_get_create_access, so if that transaction does
indeed use the buffer then it will be accounted for properly, and if it does
not then we know we didn't use it.

That will be important for the next patch in this series.  Tested thoroughly
by myself using postmark/iozone/bonnie++.

Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Mingming Cao
4019191be7 jbd2: sparse pointer use of zero as null
Get rid of sparse related warnings from places that use integer as NULL
pointer.  (Ported from upstream ext3/jbd changes.)

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28 23:58:27 -05:00
Mingming Cao
db857da336 jbd2: Use round-jiffies() function for the "5 second" ext4/jbd2 wakeup
While "every 5 seconds" doesn't sound as a problem, there can be many
of these (and these timers do add up over all the kernel).  The "5
second" wakeup isn't really timing sensitive; in addition even with
rounding it'll still happen every 5 seconds (with the exception of the
very first time, which is likely to be rounded up to somewhere closer
to 6 seconds)

(Ported from similar JBD patch made by Arjan van de Ven to
fs/jbd/transaction.c)

Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28 23:58:27 -05:00
Mingming Cao
7b7510662f jbd2: add lockdep support
Ported from similar patch for the jbd layer.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28 23:58:27 -05:00
Johann Lombardi
8e85fb3f30 jbd2: jbd2 stats through procfs
The patch below updates the jbd stats patch to 2.6.20/jbd2.
The initial patch was posted by Alex Tomas in December 2005
(http://marc.info/?l=linux-ext4&m=113538565128617&w=2).
It provides statistics via procfs such as transaction lifetime and size.

Sometimes, investigating performance problems, i find useful to have
stats from jbd about transaction's lifetime, size, etc. here is a
patch for review and inclusion probably.

for example, stats after creation of 3M files in htree directory:

[root@bob ~]# cat /proc/fs/jbd/sda/history
R/C  tid   wait  run   lock  flush log   hndls  block inlog ctime write drop  close
R    261   8260  2720  0     0     750   9892   8170  8187
C    259                                                    750   0     4885  1
R    262   20    2200  10    0     770   9836   8170  8187
R    263   30    2200  10    0     3070  9812   8170  8187
R    264   0     5000  10    0     1340  0      0     0
C    261                                                    8240  3212  4957  0
R    265   8260  1470  0     0     4640  9854   8170  8187
R    266   0     5000  10    0     1460  0      0     0
C    262                                                    8210  2989  4868  0
R    267   8230  1490  10    0     4440  9875   8171  8188
R    268   0     5000  10    0     1260  0      0     0
C    263                                                    7710  2937  4908  0
R    269   7730  1470  10    0     3330  9841   8170  8187
R    270   0     5000  10    0     830   0      0     0
C    265                                                    8140  3234  4898  0
C    267                                                    720   0     4849  1
R    271   8630  2740  20    0     740   9819   8170  8187
C    269                                                    800   0     4214  1
R    272   40    2170  10    0     830   9716   8170  8187
R    273   40    2280  0     0     3530  9799   8170  8187
R    274   0     5000  10    0     990   0      0     0


where,

R     - line for transaction's life from T_RUNNING to T_FINISHED
C     - line for transaction's checkpointing
tid   - transaction's id
wait  - for how long we were waiting for new transaction to start
         (the longest period journal_start() took in this transaction)
run   - real transaction's lifetime (from T_RUNNING to T_LOCKED
lock  - how long we were waiting for all handles to close
         (time the transaction was in T_LOCKED)
flush - how long it took to flush all data (data=ordered)
log   - how long it took to write the transaction to the log
hndls - how many handles got to the transaction
block - how many blocks got to the transaction
inlog - how many blocks are written to the log (block + descriptors)
ctime - how long it took to checkpoint the transaction
write - how many blocks have been written during checkpointing
drop  - how many blocks have been dropped during checkpointing
close - how many running transactions have been closed to checkpoint this one

all times are in msec.


[root@bob ~]# cat /proc/fs/jbd/sda/info
280 transaction, each upto 8192 blocks
average:
  1633ms waiting for transaction
  3616ms running transaction
  5ms transaction was being locked
  1ms flushing data (in ordered mode)
  1799ms logging transaction
  11781 handles per transaction
  5629 blocks per transaction
  5641 logged blocks per transaction

Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28 23:58:27 -05:00
Mingming Cao
d802ffa885 JBD2/Ext4: Convert kmalloc to kzalloc in jbd2/ext4
Convert kmalloc to kzalloc() and get rid of the memset().

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:57 -04:00
Mingming Cao
2d917969bc JBD2: replace jbd_kmalloc with kmalloc directly.
This patch cleans up jbd_kmalloc and replace it with kmalloc directly

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:57 -04:00
Mingming Cao
af1e76d6b3 JBD2: jbd2 slab allocation cleanups
JBD2: Replace slab allocations with page allocations

JBD2 allocate memory for committed_data and frozen_data from slab. However
JBD2 should not pass slab pages down to the block layer. Use page allocator
pages instead. This will also prepare JBD for the large blocksize patchset.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:56 -04:00
Uwe Kleine-König
5886269962 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:16 +02:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Adrian Bunk
7ddae86095 [PATCH] make fs/jbd2/transaction.c:__kbd2_journal_temp_unlink_buffer() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:40 -08:00
Eric Sandeen
9b57988db9 [PATCH] jbd2: journal_dirty_data re-check for unmapped buffers
When running several fsx's and other filesystem stress tests, we found
cases where an unmapped buffer was still being sent to submit_bh by the
ext3 dirty data journaling code.

I saw this happen in two ways, both related to another thread doing a
truncate which would unmap the buffer in question.

Either we would get into journal_dirty_data with a bh which was already
unmapped (although journal_dirty_data_fn had checked for this earlier, the
state was not locked at that point), or it would get unmapped in the middle
of journal_dirty_data when we dropped locks to call sync_dirty_buffer.

By re-checking for mapped state after we've acquired the bh state lock, we
should avoid these races.  If we find a buffer which is no longer mapped,
we essentially ignore it, because journal_unmap_buffer has already decided
that this buffer can go away.

I've also added tracepoints in these two cases, and made a couple other
tracepoint changes that I found useful in debugging this.

Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 11:30:51 -07:00
OGAWA Hirofumi
3e2a532b26 [PATCH] ext3/4: fix J_ASSERT(transaction->t_updates > 0) in journal_stop()
A disk generated some I/O error, after it, I hitted
J_ASSERT(transaction->t_updates > 0) in journal_stop().

It seems to happened on ext3_truncate() path from stack trace. Then,
maybe the following case may trigger J_ASSERT(transaction->t_updates > 0).

ext3_truncate()
    -> ext3_free_branches()
        -> ext3_journal_test_restart()
	    -> ext3_journal_restart()
                -> journal_restart()
                transaction->t_updates--;
                /* another process aborted journal */
                    -> start_this_handle()
		    returns -EROFS without transaction->t_updates++;

    -> ext3_journal_stop()
        -> journal_stop()
	J_ASSERT(transaction->t_updates > 0)

If journal was aborted in middle of journal_restart(), ext3_truncate()
may trigger J_ASSERT().

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:44 -07:00
Mingming Cao
f7f4bccb72 [PATCH] jbd2: rename jbd2 symbols to avoid duplication of jbd symbols
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00
Dave Kleikamp
470decc613 [PATCH] jbd2: initial copy of files from jbd
This is a simple copy of the files in fs/jbd to fs/jbd2 and
/usr/incude/linux/[ext4_]jbd.h to /usr/include/[ext4_]jbd2.h

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00