1
Commit Graph

5223 Commits

Author SHA1 Message Date
Uli Luckas
896937ad5c [ARM] 3120/1: Fix MMC/SD card driver resume deadlock
Patch from Uli Luckas

This is a simplification of patch 3116/1 as sugested by Russell King.

Signed-off-by: Uli Luckas <u.luckas@road-gmbh.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07 21:22:07 +00:00
Linus Torvalds
6adfd34e85 Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel 2005-11-06 16:58:38 -08:00
Pantelis Antoniou
21c614a789 [SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.
The offsets of the registers are in a different place, and
some parts cannot handle a full set of modem control signals.

Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-06 09:07:03 +00:00
Samuel Thibault
88dcb6c411 [PATCH] Set the vga cursor even when hidden
Some visually impaired people use hardware devices which directly read
the vga screen. When newt for instance asks to hide the cursor for
better visual aspect, the kernel puts the vga cursor out of the screen,
so that the cursor position can't be read by the hardware device. This
is a great loss for such people.

Here is a patch which uses the same technique as CUR_NONE for hiding the
cursor while still moving it.

Mario, you should apply it to the speakup kernel for access floppies
asap. I'll submit a 2.4 patch too.

Signed-off-by: samuel.thibault@ens-lyon.org
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 13:30:03 -08:00
Russell King
2c119aa809 [DRIVER MODEL] Fix sgivwfb
Statically allocated devices in module data is a potential cause
of oopsen.  The device may be in use by a userspace process, which
will keep a reference to the device.  If the module is unloaded,
the module data will be freed.  Subsequent use of the platform
device will cause a kernel oops.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:22:39 +00:00
Russell King
abbf268ae8 [DRIVER MODEL] Fix gbefb
Statically allocated devices in module data is a potential cause
of oopsen.  The device may be in use by a userspace process, which
will keep a reference to the device.  If the module is unloaded,
the module data will be freed.  Subsequent use of the platform
device will cause a kernel oops.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:22:13 +00:00
Russell King
8d972a9621 [DRIVER MODEL] Fix arcfb
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device.  If the module is unloaded, the module
text will be freed.  Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:21:38 +00:00
Russell King
09c6518ca0 [DRIVER MODEL] Fix macsonic
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device.  If the module is unloaded, the module
text will be freed.  Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:21:10 +00:00
Russell King
95cb5d954e [DRIVER MODEL] Fix jazzsonic
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device.  If the module is unloaded, the module
text will be freed.  Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:20:47 +00:00
Russell King
5d994b7f5d [DRIVER MODEL] Fix depca
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device.  If the module is unloaded, the module
text will be freed.  Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:20:21 +00:00
Russell King
37c12e7497 [DRIVER MODEL] Improved dynamically allocated platform_device interface
Re-jig the simple platform device support to allow private data
to be attached to a platform device, as well as allowing the
parent device to be set.

Example usage:

	pdev = platform_device_alloc("mydev", id);
	if (pdev) {
		err = platform_device_add_resources(pdev, &resources,
						    ARRAY_SIZE(resources));
		if (err == 0)
			err = platform_device_add_data(pdev, &platform_data,
						       sizeof(platform_data));
		if (err == 0)
			err = platform_device_add(pdev);
	} else {
		err = -ENOMEM;
	}
	if (err)
		platform_device_put(pdev);

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:19:33 +00:00
Linus Torvalds
70d9d825e0 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2005-11-05 12:04:02 -08:00
Matt Porter
f896424cbc [PATCH] phy address mask support for generic phy layer
Adds a phy_mask field to struct mii_bus and uses it.  This field
indicates each phy address to be ignored when probing the mdio bus.

This support is needed for the fs_enet and ibm_emac drivers to be
converted to the generic phy layer among other drivers. Many systems
lock up on probing certain phy addresses or probing doesn't return
0xffff when nothing is found at the address. A new driver I'm
working on also makes use of this mask.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05 14:40:55 -05:00
Don Fry
4371dc6c60 [PATCH] pcnet32: Prevent hang with 79c976
Some boards using the 79c976 pcnet32 chip will hang the system if the
ethtool --register-dump is performed with the device operational.  The
request to read bcr30 is retried by the PCI device infinitely without
returning data, hanging the system.

Tested ia32 and ppc64.

Signed-off-by:  Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05 14:40:55 -05:00
Don Fry
2964bbd704 [PATCH] pcnet32: AT2700/2701 and Bugzilla 2699 & 4551
This patch is a better fix for Allied Telesyn 2700/2701 FX boards than
the change made in early January this year.  It allows the user to
select the speed/duplex via module_param, but if no selection is made,
forces the speed to 100 FD.  It fixes both Bugzilla bugs 2669 and 4551.
Tested ia32 and ppc64 by myself, and by the originator of bug 2669.

Signed-off-by: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05 14:40:55 -05:00
Don Fry
a88c844c17 [PATCH] pcnet32: show name of failing device
Display the name eth%d or pci_name() of device which fails to allocate
memory.  When changing ring size via ethtool, it also releases the
lock before returning on error.  Added comment that the caller of
pcnet32_alloc_ring must call pcnet32_free_ring on error, to avoid leak.
Tested ia32 by forcing allocation errors.

Signed-off-by: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05 14:40:55 -05:00
Ananda Raju
da6971d8ec [PATCH] S2io: Multi buffer mode support
Hi,
This patch  provides dynamic two buffer-mode and 3 buffer-mode options.
Previously 2 buffer-mode was compilation option. Now with this patch applied
one can load driver in 2 buffer-mode with module-load parameter

ie.
#insmod s2io.ko rx_ring_mode=2

This patch also provides 3 buffer-mode which provides header separation
functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and
"skb_shinfo(skb)->frag_list->data" will have have L4 payload.
one can load driver in 3 buffer-mode with same above module-load parameter

ie.
#insmod s2io.ko rx_ring_mode=3

Please review the patch.

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05 14:40:27 -05:00
Gabriel A. Devenyi
29b09fcc34 [PATCH] drivers/net/wireless/airo.c unsigned comparason
fid is declared as a u32 (unsigned int), and then a few lines later, it is checked for a value < 0, which is clearly useless.
In the two locations this function is used, in one it is *explicitly* given a negative number, which would be ignored with the
current definition.

Thanks to LinuxICC (http://linuxicc.sf.net).

Signed-off-by: Gabriel A. Devenyi <ace@staticwave.ca>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05 14:40:26 -05:00
Jeff Garzik
328198acb7 Merge branch 'master' 2005-11-05 14:38:55 -05:00
Tejun Heo
537a95d935 [libata] restore sg on DMA mapping failure 2005-11-05 14:29:01 -05:00
Linus Torvalds
fecb4a0c87 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-11-05 10:31:35 -08:00
Linus Torvalds
a2c78f7c1d Merge master.kernel.org:/home/rmk/linux-2.6-mmc 2005-11-05 09:47:46 -08:00
Alan Stern
39b7f1e25a [SCSI] sd: Fix refcounting
Currently the driver takes a reference only for requests coming by way
of the gendisk, not for requests coming by way of the struct device or
struct scsi_device.  Such requests can arrive in the rescan, flush,
and shutdown pathways.

The patch also makes the scsi_disk keep a reference to the underlying
scsi_device, and it erases the scsi_device's pointer to the scsi_disk
when the scsi_device is removed (since the pointer should no longer be
used).

This resolves Bugzilla entry #5237.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-05 09:52:24 -06:00
Pierre Ossman
d191634f7a [MMC] Use controller id instead of driver name for printks
The printks that aren't for debugging should use the name of the controller,
not the driver name. Multiple MMC controllers aren't that common today, but
this is the right way to do things.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-05 10:36:35 +00:00
Pierre Ossman
25cc5e5bd2 [MMC] Fix chip config in wbsd
There is a broken if clause in the wbsd driver that can cause the
driver to try and configure the chip even though none is found. This
results in i/o on invalid ports.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-05 10:16:50 +00:00
James Bottomley
0ee957cb7a Fix ips.c compile
It looks like one of the ips patches was missing a closing brace in a
function

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-04 23:22:55 -06:00
James Bottomley
849a8924a6 Merge by Hand
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and
scsi_transport_fc.h

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-04 22:29:52 -06:00
Jeff Garzik
6037d6bbdf [libata] ATAPI pad allocation fixes/cleanup
Use ata_pad_{alloc,free} in two drivers, to factor out common code.

Add ata_pad_{alloc,free} to two other drivers, which needed the padding
but had not been updated.
2005-11-04 22:08:00 -05:00
Jeff Garzik
c2cc87ca95 Merge branch 'master' 2005-11-04 21:39:31 -05:00
Calin A. Culianu
7015faa7df [PATCH] nvidiafb: Geforce 7800 series support added
This adds support for the Nvidia Geforce 7800 series of cards to the
nvidiafb framebuffer driver.  All it does is add the PCI device id for
the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device
table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work
on these cards.

I also added the relevant PCI device ids to linux/pci_ids.h

I tested it on my 7800 GTX here and it works like a charm.  I now can
get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text
mode to make your eyes BLEED.  ;)

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 18:01:34 -08:00
Linus Torvalds
127f2fa31a Merge branch 'srp' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband 2005-11-04 16:32:36 -08:00
Linus Torvalds
ba77df570c Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband 2005-11-04 16:31:54 -08:00
Linus Torvalds
602d4a7e2f Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-merge 2005-11-04 16:27:50 -08:00
David S. Miller
462aae65f6 [USB]: Make early handoff a final fixup instead of a header one.
At header fixup time, it is not yet legal to ioremap() PCI
device registers, yet that is what this quirk code needs to
do.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-04 11:17:24 -08:00
Russell King
34cf9e3750 [MMC] Response to write commands is R1 nor R1b
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04 18:43:39 +00:00
Linus Torvalds
c8ebce6eeb Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-11-04 10:42:53 -08:00
Russell King
d56c524afa [PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfrom
No longer maintained
2005-11-04 17:28:34 +00:00
Russell King
866237eafc [PATCH] ARM: Reverted 2921/1: Support for the RTC / nvram on the Comdial MP1000
No longer maintained
2005-11-04 17:26:57 +00:00
Russell King
e399822da0 [PATCH] ARM: Reverted 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000
No longer maintained
2005-11-04 17:26:56 +00:00
Jack Morgenstein
d09e327641 [IB] mthca: check P_Key index in modify QP
Make sure that the P_Key index passed into mthca_modify_qp() is
within the device's P_Key table.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-03 14:58:33 -08:00
Ben Dooks
b2281abf11 [SERIAL] 8250_early.c passing 0 instead of NULL
Fix sparse warning about passing `0` to  simple_strtoul()

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-03 21:07:37 +00:00
Roland Dreier
0c99cb6d5f [IB] umad: fix hot remove of IB devices
Fix hotplug of devices for ib_umad module: when a device goes away,
kill off all MAD agents for open files associated with that device,
and make sure that the device is not touched again after ib_umad
returns from its remove_one function.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-03 12:01:18 -08:00
Roland Dreier
87cfe32375 [IB] mthca: fix format of FW version
Mellanox has decided that the components of the firmware version are
really meant to be displayed in decimal, e.g. 0x000400070190 is
version 4.7.400.  Change the format we use from "%x.%x.%x" to
"%d.%d.%d" to match this convention.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 22:59:37 -08:00
Roland Dreier
8ae5a8a24f [IPoIB] don't compile debug code if debugging isn't enabled
Don't build ipoib_mcast_iter_ functions if CONFIG_INFINIBAND_IPOIB_DEBUG
is not enabled -- their only callers will not be built either.

Also move the prototype for ipoib_open() to ipoib.h to fix a sparse warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 20:51:01 -08:00
Linus Torvalds
cfa024f4e4 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-11-02 18:38:22 -08:00
Roland Dreier
aef9ec39c4 IB: Add SCSI RDMA Protocol (SRP) initiator
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator.  This driver is
used to talk talk to InfiniBand SRP targets (storage devices).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 14:07:13 -08:00
Roland Dreier
21a384897d [IPoIB] remove unneeded initializations to 0
Shrink our source and .text a little by removing a few assignments of
NULL and 0 to memory that is already cleared as part of the allocation.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 10:07:59 -08:00
Linus Torvalds
ec1890c5df Merge git://brick.kernel.dk/data/git/linux-2.6-block 2005-11-02 08:06:02 -08:00
Roland Dreier
de6eb66b56 [IB] kzalloc() conversions
Replace kmalloc()+memset(,0,) with kzalloc(), for a net savings of 35
source lines and about 500 bytes of text.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 07:23:14 -08:00
Russell King
e831556fb6 [ARM] AMBA CLCD driver can drive PL110 and PL111 primecells
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 14:40:35 +00:00