1
Commit Graph

4681 Commits

Author SHA1 Message Date
Linus Torvalds
176000734e ata changes for 6.12
- Convert the qcom AHCI controller DT bindings to DT schema (from
    Rayyan)
 
  - Cleanup of libata core and drivers code handling controller and
    device quirks to rename "blacklist" to the more neutral "quirk" and
    to replace the rarely used "horkage" term with the more common
    "quirk" naming (from me)
 
  - Add libata-core message to print the quirks applied to a controller
    or device (from me)
 
  - Remove the not-so-useful function ata_noop_qc_prep() from libata core
    (from me)
 
  - ahci_imx driver cleanup, improvements and DT bindings compatible
    strings update (from Richard and Dan)
 
  - libahci_platform improvements (from Zhang)
 
  - Remove obsolete functions declarations from libata header files (from
    Gaosheng)
 
  - Improve teh ahci_brcm driver using managed device resources funetions
    (from Zhang)
 
  - Introduce new helper function to improve libata EH code readability
    (from Niklas)
 
  - Enable module autoloading for the pata_ftide010, pata_ixp4xx and
    sata_gemini drivers (from Liao)
 
  - Move SATA related functions and data declaraions from libata-core to
    libata-sata (from me)
 
  - Rename the function handling the sense data for successful NCQ
    commands log to better reflect that function actions (from me)
 
  - Reduce libata memory usage by moving port resources to struct
    ata_device and by optimizing the management of resources for CDL
    capable devices (from me)
 
  - Improve libata-eh handling of failed ATA passthrough commands (from
    Niklas)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZuvJ2wAKCRDdoc3SxdoY
 dhVhAP9Zctzd9Ylb17eO7vVDwA0p7nzqyDxwxWPL8p3FtSm8PQD+PWQaLAPfWmKD
 X8RqWv9WDGvCGUTEBBSjiZslEp7ccwk=
 =68kF
 -----END PGP SIGNATURE-----

Merge tag 'ata-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata updates from Damien Le Moal:

 - Convert the qcom AHCI controller DT bindings to DT schema (from
   Rayyan)

 - Cleanup of libata core and drivers code handling controller and
   device quirks to rename "blacklist" to the more neutral "quirk" and
   to replace the rarely used "horkage" term with the more common
   "quirk" naming (me)

 - Add libata-core message to print the quirks applied to a controller
   or device (me)

 - Remove the not-so-useful function ata_noop_qc_prep() from libata core
   (me)

 - ahci_imx driver cleanup, improvements and DT bindings compatible
   strings update (Richard and Dan)

 - libahci_platform improvements (Zhang)

 - Remove obsolete functions declarations from libata header files (from
   Gaosheng)

 - Improve teh ahci_brcm driver using managed device resources funetions
   (Zhang)

 - Introduce new helper function to improve libata EH code readability
   (Niklas)

 - Enable module autoloading for the pata_ftide010, pata_ixp4xx and
   sata_gemini drivers (Liao)

 - Move SATA related functions and data declaraions from libata-core to
   libata-sata (me)

 - Rename the function handling the sense data for successful NCQ
   commands log to better reflect that function actions (me)

 - Reduce libata memory usage by moving port resources to struct
   ata_device and by optimizing the management of resources for CDL
   capable devices (me)

 - Improve libata-eh handling of failed ATA passthrough commands
   (Niklas)

* tag 'ata-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (39 commits)
  ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
  ata: libata: Fix W=1 compilation warning
  ata: libata: Improve CDL resource management
  ata: libata: Introduce ata_dev_free_resources
  ata: libata: Move sector_buf from struct ata_port to struct ata_device
  ata: libata: Rename ata_eh_read_sense_success_ncq_log()
  ata: libata: Move sata_std_hardreset() definition to libata-sata.c
  ata: libata: Move sata_down_spd_limit() to libata-sata.c
  ata: libata: Improve __ata_qc_complete()
  ata: libata-scsi: Improve ata_scsi_handle_link_detach()
  ata: libata: Cleanup libata-transport
  ata: sata_gemini: Enable module autoloading
  ata: pata_ixp4xx: Enable module autoloading
  ata: pata_ftide010: Enable module autoloading
  ata: libata: Add helper ata_eh_decide_disposition()
  ata: ahci_brcm: Use devm_platform_ioremap_resource_byname() helper function
  ata: libata: Remove obsolete function declarations
  ata: ahci_imx: Fix error code in probe()
  ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
  ata: ahci_imx: Correct the email address
  ...
2024-09-19 09:49:10 +02:00
Niklas Cassel
e5dd410acb ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.

scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.

Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.

libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.

Thus, libata doesn't really care about DID_TIME_OUT at all, and currently
clears the host byte at the end of EH, in ata_scsi_qc_complete(), before
scsi_eh_finish_cmd() is called.

However, this clearing in ata_scsi_qc_complete() is currently only done
for commands that are not ATA passthrough commands.

Since the host byte is visible in the completion that we return to user
space for ATA passthrough commands, for ATA passthrough commands that got
completed via EH (commands with sense data), the user will incorrectly see:
ATA pass-through(16): transport error: Host_status=0x03 [DID_TIME_OUT]

Fix this by moving the clearing of the host byte (which is currently only
done for commands that are not ATA passthrough commands) from
ata_scsi_qc_complete() to the start of EH (regardless if the command is
ATA passthrough or not).

While at it, use the proper helper function to clear the host byte, rather
than open coding the clearing.

This will make sure that we:
-Correctly clear DID_TIME_OUT for both ATA passthrough commands and
 commands that are not ATA passthrough commands.
-Do not needlessly clear the host byte for commands that did not go via EH.
 ata_scsi_qc_complete() is called both for commands that are completed
 normally (without going via EH), and for commands that went via EH,
 however, only commands that went via EH will have DID_TIME_OUT set.

Fixes: 24aeebbf8e ("scsi: ata: libata: Change ata_eh_request_sense() to not set CHECK_CONDITION")
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Closes: https://lore.kernel.org/linux-ide/ZttIN8He8TOZ7Lct@google.com/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-11 08:03:43 +09:00
Damien Le Moal
d647bdf4d0 ata: libata: Fix W=1 compilation warning
Commit c494708d1f ("ata: libata: Cleanup libata-transport")
inadvertently changed the name of the link argument to ata_link in the
kdoc description of ata_tlink_add(), causing warnings to be issue when
compiling with W=1:

drivers/ata/libata-transport.c:690: warning: Function parameter or
struct member 'link' not described in 'ata_tlink_add'
drivers/ata/libata-transport.c:690: warning: Excess function parameter
'ata_link' description in 'ata_tlink_add'

Change the kdoc argument name to "link" to avoid these warnings.

Fixes: c494708d1f ("ata: libata: Cleanup libata-transport")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-07 11:02:52 +09:00
Damien Le Moal
602bcf2126 ata: libata: Improve CDL resource management
The ncq_sense_buf buffer field of struct ata_port is allocated and used
only for devices that support the Command Duration Limits (CDL) feature.
However, the cdl buffer of struct ata_device, which is used to cache the
command duration limits log page for devices supporting CDL is always
allocated as part of struct ata_device, which is wasteful of memory for
devices that do not support this feature.

Clean this up by defining both buffers as part of the new ata_cdl
structure and allocating this structure only for devices that support
the CDL feature. This new structure is attached to struct ata_device
using the cdl pointer.

The functions ata_dev_init_cdl_resources() and
ata_dev_cleanup_cdl_resources() are defined to manage this new structure
allocation, initialization and freeing when a port is removed or a
device disabled. ata_dev_init_cdl_resources() is called from
ata_dev_config_cdl() only for devices that support CDL.
ata_dev_cleanup_cdl_resources() is called from ata_dev_free_resources()
to free the ata_cdl structure when a device is being disabled by EH.

Note that the name of the former cdl log buffer of struct ata_device is
changed to desc_log_buf to make it clearer that it is a buffer for the
limit descriptors log page.

This change reduces the size of struct ata_device, thus reducing memory
usage for ATA devices that do not support the CDL feature.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:56 +09:00
Damien Le Moal
5f8319c4b3 ata: libata: Introduce ata_dev_free_resources
Introduce the function ata_dev_free_resources() to free the resources
allocated to support a device features. For now, this function is
reduced to calling zpodd_exit() for devices that have this feature
enabled.

ata_dev_free_resources() is called from ata_eh_dev_disable() as this
function is always called for all devices attached to a port that is
being detached and for devices that are being disabled due to being
removed (detached) from the system or due to errors.

With this change, the call to zpodd_exit() done in ata_port_detach()
and ata_scsi_handle_link_detach() are removed as these functions
remove all devices attached to the link or port using libata EH, thus
resulting in ata_eh_dev_disable() being called and the zpodd_exit()
function being executed.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Damien Le Moal
da65bbdd3b ata: libata: Move sector_buf from struct ata_port to struct ata_device
The 512B buffer sector_buf field of struct ata_port is used for scanning
devices as well as during error recovery with ata EH. This buffer is
thus useless if a port does not have a device connected to it.
And also given that commands using this buffer are issued to devices,
and not to ports, move this buffer definition from struct ata_port to
struct ata_device.

This change slightly increases system memory usage for systems using a
port-multiplier as in that case we do not need a per-device buffer for
scanning devices (PMP does not allow parallel scanning) nor for EH (as
when entering EH we are guaranteed that all commands to all devices
connected to the PMP have completed or have been aborted). However,
this change reduces memory usage on systems that have many ports with
only few devices rives connected, which is a much more common use case
than the PMP use case.

Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Damien Le Moal
10e807637f ata: libata: Rename ata_eh_read_sense_success_ncq_log()
The function ata_eh_read_sense_success_ncq_log() does more that just
reading the sense data for successful NCQ commands log page as it also
sets the sense data for all commands listed in the log page.

Rename this function to ata_eh_get_ncq_success_sense() to better
describe what the function does. Furthermore, since this function is
only called from ata_eh_get_success_sense() in libata-eh.c, there is no
need to export it and its declaration can be moved to
drivers/ata/libata.h.

To be consistent with this change, the function
ata_eh_read_sense_success_non_ncq() is also renamed to
ata_eh_get_non_ncq_success_sense().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
78f76b09c9 ata: libata: Move sata_std_hardreset() definition to libata-sata.c
Unlike ata_std_prereset() and ata_std_postreset(), the function
sata_std_hardreset() applies only to SATA devices, as its name implies.
So move its definition to libata-sata.c.

Together with this, also move the definition of sata_port_ops to
libata-sata.c, where it belongs.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
b642212d88 ata: libata: Move sata_down_spd_limit() to libata-sata.c
Move the definition of the function sata_down_spd_limit() to
libata-sata.c where it belongs, together with sata_set_spd().
The helper function ata_sstatus_online() is also changed to be an
inline function defined in drivers/ata/libata.h.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
5bb52d9265 ata: libata: Improve __ata_qc_complete()
The function __ata_qc_complete() is always called with a qc that already
has been dereferenced and so is guaranteed to be non-NULL (as otherwise
the kernel would have crashed). So remove the warning for a NULL qc as
it is useless.

Furthermore, the qc passed to __ata_qc_complete() must always be marked
as active with the ATA_QCFLAG_ACTIVE flag. If that is not the case, in
addition to the existing warning, return early so that we do not attempt
to complete an invalid qc.

Finally, fix the comment related to clearing the qc active flag as that
operation applies to all devices, not just ATAPI ones.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2024-09-07 10:16:55 +09:00
Damien Le Moal
a16951510f ata: libata-scsi: Improve ata_scsi_handle_link_detach()
A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Damien Le Moal
c494708d1f ata: libata: Cleanup libata-transport
Move the ATA link transport device related functions after the ATA
transport device related functions to avoid the need for forward
declaring ata_tdev_add() and ata_tdev_delete().

And while at it, do the following:
1) Change ata_is_ata_dev() and ata_is_link() to return a boolean
2) Fix a pointer declaration style in ata_is_ata_dev()
3) Improve the kdoc comments for ata_tdev_free(), ata_tdev_delete(),
   ata_tdev_add(), ata_tlink_delete() and ata_tlink_add()

No functional changes are introduced by this cleanup.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-09-07 10:16:55 +09:00
Liao Chen
0f3e1eaaf7 ata: sata_gemini: Enable module autoloading
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.

Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-02 08:06:23 +09:00
Liao Chen
619c98622b ata: pata_ixp4xx: Enable module autoloading
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.

Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-02 08:06:04 +09:00
Liao Chen
4b4e1a961f ata: pata_ftide010: Enable module autoloading
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.

Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-02 08:05:36 +09:00
Niklas Cassel
9526dec226 ata: libata: Add helper ata_eh_decide_disposition()
Every time I see libata code calling scsi_check_sense(), I get confused
why the code path that is working fine for SCSI code, is not sufficient
for libata code.

The reason is that SCSI usually gets the sense data as part of the
completion, and will thus automatically call scsi_check_sense(), which
will set the SCSI ML byte (if any).

However, for libata queued commands, we always need to fetch the sense
data via SCSI EH, and thus do not get the luxury of having
scsi_check_sense() called automatically.

Add a new helper, ata_eh_decide_disposition(), that has a ata_eh_ prefix
to more clearly highlight that this is only needed for code called by EH,
while also having a similar name to scsi_decide_disposition(), such that
it is easier to compare the libata code with the equivalent SCSI code.

Also add a big kdoc comment explaining why this helper is called/needed in
the first place.

Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-29 10:06:11 +09:00
Zhang Zekun
43d37fffda ata: ahci_brcm: Use devm_platform_ioremap_resource_byname() helper function
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.

Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-28 10:32:21 +09:00
Gaosheng Cui
13acf2b748 ata: libata: Remove obsolete function declarations
The function ata_schedule_scsi_eh() was removed with commit
f8bbfc247e ("[PATCH] SCSI: make scsi_implement_eh() generic API for
SCSI transports"), and the function ata_sff_irq_clear() was removed
with commit 37f65b8bc262("libata-sff: ata_sff_irq_clear() is BMDMA
specific").

Remove the now useless declarations of these functions in
drivers/ata/libata.h and include/linux/libata.h.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-27 08:04:53 +09:00
Zheng Qixing
284b75a3d8 ata: libata: Fix memory leak for error path in ata_host_alloc()
In ata_host_alloc(), if devres_alloc() fails to allocate the device host
resource data pointer, the already allocated ata_host structure is not
freed before returning from the function. This results in a potential
memory leak.

Call kfree(host) before jumping to the error handling path to ensure
that the ata_host structure is properly freed if devres_alloc() fails.

Fixes: 2623c7a5f2 ("libata: add refcounting to ata_host")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-27 06:54:36 +09:00
Michael Ellerman
d4bc0a264f ata: pata_macio: Use WARN instead of BUG
The overflow/underflow conditions in pata_macio_qc_prep() should never
happen. But if they do there's no need to kill the system entirely, a
WARN and failing the IO request should be sufficient and might allow the
system to keep running.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-21 14:33:23 +09:00
Michael Ellerman
822c8020ae ata: pata_macio: Fix DMA table overflow
Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing
in pata-macio since commit 09fe2bfa6b ("ata: pata_macio: Fix
max_segment_size with PAGE_SIZE == 64K").

For example:

  kernel BUG at drivers/ata/pata_macio.c:544!
  Oops: Exception in kernel mode, sig: 5 [#1]
  BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac
  ...
  NIP pata_macio_qc_prep+0xf4/0x190
  LR  pata_macio_qc_prep+0xfc/0x190
  Call Trace:
    0xc1421660 (unreliable)
    ata_qc_issue+0x14c/0x2d4
    __ata_scsi_queuecmd+0x200/0x53c
    ata_scsi_queuecmd+0x50/0xe0
    scsi_queue_rq+0x788/0xb1c
    __blk_mq_issue_directly+0x58/0xf4
    blk_mq_plug_issue_direct+0x8c/0x1b4
    blk_mq_flush_plug_list.part.0+0x584/0x5e0
    __blk_flush_plug+0xf8/0x194
    __submit_bio+0x1b8/0x2e0
    submit_bio_noacct_nocheck+0x230/0x304
    btrfs_work_helper+0x200/0x338
    process_one_work+0x1a8/0x338
    worker_thread+0x364/0x4c0
    kthread+0x100/0x104
    start_kernel_thread+0x10/0x14

That commit increased max_segment_size to 64KB, with the justification
that the SCSI core was already using that size when PAGE_SIZE == 64KB,
and that there was existing logic to split over-sized requests.

However with a sufficiently large request, the splitting logic causes
each sg to be split into two commands in the DMA table, leading to
overflow of the DMA table, triggering the BUG_ON().

With default settings the bug doesn't trigger, because the request size
is limited by max_sectors_kb == 1280, however max_sectors_kb can be
increased, and apparently some distros do that by default using udev
rules.

Fix the bug for 4KB kernels by reverting to the old max_segment_size.

For 64KB kernels the sg_tablesize needs to be halved, to allow for the
possibility that each sg will be split into two.

Fixes: 09fe2bfa6b ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K")
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Closes: https://lore.kernel.org/all/62d248bb-e97a-25d2-bcf2-9160c518cae5@kolla.no/
Reported-by: Jonáš Vidra <vidra@ufal.mff.cuni.cz>
Closes: https://lore.kernel.org/all/3b6441b8-06e6-45da-9e55-f92f2c86933e@ufal.mff.cuni.cz/
Tested-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-21 14:31:48 +09:00
Dan Carpenter
66afec7c69 ata: ahci_imx: Fix error code in probe()
Return a negative error code if devm_clk_get() fails.  Don't return
success.

Fixes: 3156e1b2c0 ("ata: ahci_imx: AHB clock rate setting is not required on i.MX8QM AHCI SATA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cbcbdfc2-ddc7-4684-8ad4-018227823546@stanley.mountain
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-15 13:44:33 +02:00
Zhang Zekun
aa3ca1faf3 ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
for_each_child_of_node_scoped() can put the device_node automatically.
So let's use it to make the code simpler by avoiding the need to
explicitly call of_node_put().

Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240810023426.110624-1-zhangzekun11@huawei.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-15 13:30:06 +02:00
Niklas Cassel
fa0db8e568 Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"
This reverts commit 28ab976911.

Sense data can be in either fixed format or descriptor format.

SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit:
"The SATL shall support this bit as defined in SPC-5 with the following
exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense
data), then the SATL should return fixed format sense data for ATA
PASS-THROUGH commands."

The libata SATL has always kept D_SENSE set to zero by default. (It is
however possible to change the value using a MODE SELECT SG_IO command.)

Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit,
however, successful ATA PASS-THROUGH commands incorrectly returned the
sense data in descriptor format (regardless of the D_SENSE bit).

Commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for
CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH
commands.

However, after commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE
bit for CK_COND=1 and no error"), there were bug reports that hdparm,
hddtemp, and udisks were no longer working as expected.

These applications incorrectly assume the returned sense data is in
descriptor format, without even looking at the RESPONSE CODE field in the
returned sense data (to see which format the returned sense data is in).

Considering that there will be broken versions of these applications around
roughly forever, we are stuck with being bug compatible with older kernels.

Cc: stable@vger.kernel.org # 4.19+
Reported-by: Stephan Eisvogel <eisvogel@seitics.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/
Fixes: 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-14 15:49:37 +02:00
Richard Zhu
6773e058ae ata: ahci_imx: Correct the email address
Correct the email address of driver author.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-6-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-12 14:41:37 +02:00
Richard Zhu
803f9fb819 ata: ahci_imx: Enlarge RX water mark for i.MX8QM SATA
The RXWM(RxWaterMark) sets the minimum number of free location within
the RX FIFO before the watermark is exceeded which in turn will cause
the Transport Layer to instruct the Link Layer to transmit HOLDS to the
transmitting end.

Based on the default RXWM value 0x20, RX FIFO overflow might be observed
on i.MX8QM MEK board, when some Gen3 SATA disks are used.

The FIFO overflow will result in CRC error, internal error and protocol
error, then the SATA link is not stable anymore.

To fix this issue, enlarge RX water mark setting from 0x20 to 0x29.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-5-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-12 14:41:37 +02:00
Richard Zhu
3156e1b2c0 ata: ahci_imx: AHB clock rate setting is not required on i.MX8QM AHCI SATA
i.MX8QM AHCI SATA doesn't need set AHB clock rate to config the vendor
specified TIMER1MS register.

Set AHB clock rate only for i.MX53 and i.MX6Q.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-4-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-12 14:41:37 +02:00
Richard Zhu
4147e9d240 ata: ahci_imx: Clean up code by using i.MX8Q HSIO PHY driver
Clean up code by using PHY interface provided by the PHY driver under
PHY subsystem(drivers/phy/freescale/phy-fsl-imx8qm-hsio.c).

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-12 14:41:37 +02:00
Damien Le Moal
bf1807c6ee ata: libata: Print device quirks only once
In ata_dev_print_quirks(), return early if ata_dev_print_info() returns
false or if we already printed quirk information. This is to avoid
printing a device quirks multiple times (that is, each time
ata_dev_revalidate() is called).

To remember if ata_dev_print_quirks() was already executed, define the
EH context flag ATA_EHI_DID_PRINT_QUIRKS and set this flag in
ata_dev_print_quirks().

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 58157d607a ("ata: libata: Print quirks applied to devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-08-02 09:29:55 +09:00
Damien Le Moal
b40824500e ata: libata: Remove ata_noop_qc_prep()
The function ata_noop_qc_prep(), as its name implies, does nothing and
simply returns AC_ERR_OK. For drivers that do not need any special
preparations of queued commands, we can avoid having to define struct
ata_port qc_prep operation by simply testing if that operation is
defined or not in ata_qc_issue(). Make this change and remove
ata_noop_qc_prep().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
2024-08-02 09:18:42 +09:00
Damien Le Moal
73eb824914 ata: pata_hpt37x: Rename hpt_dma_blacklisted()
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:10:38 +09:00
Damien Le Moal
16000756f3 ata: pata_hpt366: Rename hpt_dma_blacklisted()
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:10:34 +09:00
Damien Le Moal
022eb27920 ata: pata_cs5520: Rephrase file header comment
Remove the use of the term "blacklist". What the comment using that term
refers to does not seem to exist at all anyway as the driver does not
have such list but rather only a list of compatible controllers.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:10:30 +09:00
Damien Le Moal
8a3f41a335 ata: ata_piix: Remove useless comment in piix_init_sidpr()
Remove the comment using the term "blacklist" from piix_init_sidpr().
That comment is useless given that the function piix_no_sidpr() name is
clear about what is being checked.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:10:25 +09:00
Damien Le Moal
93b0f9e11c ata: sata_sil: Rename sil_blacklist to sil_quirks
Rename the array sil_blacklist to sil_quirks as this name is more
neutral and is also consistent with how this driver define quirks with
the SIL_QUIRK_XXX flags.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:10:21 +09:00
Damien Le Moal
ca8040b071 ata: ahci: Rephrase comment to not use the term blacklist
Rephrase the comment for the eMachines entry in the sysids array of
ahci_broken_suspend() to not use the term blacklist.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:10:14 +09:00
Damien Le Moal
858048568c ata: pata_serverworks: Do not use the term blacklist
Let's not use the term blacklist in the function
serverworks_osb4_filter() documentation comment and rather simply refer
to what that function looks at: the list of devices with groken UDMA5.

While at it, also constify the values of the csb_bad_ata100 array.

Of note is that all of this should probably be handled using libata
quirk mechanism but it is unclear if these UDMA5 quirks are specific
to this controller only.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:10:08 +09:00
Damien Le Moal
58157d607a ata: libata: Print quirks applied to devices
Introduce the function ata_dev_print_quirks() to print the quirk flags
that will be applied to a scanned device. This new function is called
from ata_dev_quirks() when a match on a device model or device model
and revision is found for a device in the __ata_dev_quirks array.

To implement this function, the ATA_QUIRK_ flags are redefined using
the new enum ata_quirk which defines the bit shift for each quirk
flag. The array of strings ata_quirk_names is used to define the name
of each flag, which are printed by ata_dev_print_quirks().

Example output for a device listed in the __ata_dev_quirks array and
which has the ATA_QUIRK_DISABLE flag applied:

[10193.461270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10193.469190] ata1.00: Model 'ASMT109x- Config', rev '2143 5', applying quirks: disable
[10193.469195] ata1.00: unsupported device, disabling
[10193.481564] ata1.00: disable device

enum ata_quirk also defines the __ATA_QUIRK_MAX value as one plus the
last quirk flag defined. This value is used in ata_dev_quirks() to add a
build time check that all quirk flags fit within the unsigned int
(32-bits) quirks field of struct ata_device.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-30 07:10:05 +09:00
Damien Le Moal
7ebd8c5aca ata: libata: Use QUIRK instead of HORKAGE
According to Wiktionary, the verb "hork" is computing slang defined as
"To foul up; to be occupied with difficulty, tangle, or unpleasantness;
to be broken" (https://en.wiktionary.org/wiki/hork#Verb). libata uses
this with the term "horkage" to refer to broken device features. Given
that this term is not widely used and its meaning unknown to many,
rename it to the more commonly used term "quirk", similar to many other
places in the kernel.

The renaming done is:
1) Rename all ATA_HORKAGE_XXX flags to ATA_QUIRK_XXX
2) Rename struct ata_device horkage field to quirks
3) Rename struct ata_blacklist_entry to struct ata_dev_quirks_entry. The
   array of these structures defining quirks for known devices is
   renamed __ata_dev_quirks.
4) The functions ata_dev_blacklisted() and ata_force_horkage() are
   renamed to ata_dev_quirks() and ata_force_quirks() respectively.
5) All the force_horkage_xxx() macros are renamed to force_quirk_xxx()

And while at it, make sure that the type "unsigned int" is used
consistantly for quirk flags variables and data structure fields.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
2024-07-30 07:09:54 +09:00
Damien Le Moal
f209d8ed52 ata: libata: Rename ata_dma_blacklisted()
Rename the function ata_dma_blacklisted() to ata_dev_nodma() as this new
name is more neutral. The function signature is also changed to return a
boolean instead of an int.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-29 09:07:45 +09:00
Damien Le Moal
f8f26f743c ata: libata: Change ata_dev_knobble() to return a bool
Change the function ata_dev_knobble() to return a boolean instead of a
u8.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-29 09:07:41 +09:00
Linus Torvalds
acc5965b9f Char/Misc and other driver changes for 6.11-rc1
Here is the "big" set of char/misc and other driver subsystem changes
 for 6.11-rc1.  Nothing major in here, just loads of new drivers and
 updates.  Included in here are:
   - IIO api updates and new drivers added
   - wait_interruptable_timeout() api cleanups for some drivers
   - MODULE_DESCRIPTION() additions for loads of drivers
   - parport out-of-bounds fix
   - interconnect driver updates and additions
   - mhi driver updates and additions
   - w1 driver fixes
   - binder speedups and fixes
   - eeprom driver updates
   - coresight driver updates
   - counter driver update
   - new misc driver additions
   - other minor api updates
 
 All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
 have been in linux-next for a while with no reported issues.  The
 Kconfig fixup went in 29 hours ago, so might have missed the latest
 linux-next, but was acked by everyone involved.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
 1LpTASaU6A8pN81Z1m5g
 =6U1z
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.11-rc1. Nothing major in here, just loads of new drivers and
  updates. Included in here are:

   - IIO api updates and new drivers added

   - wait_interruptable_timeout() api cleanups for some drivers

   - MODULE_DESCRIPTION() additions for loads of drivers

   - parport out-of-bounds fix

   - interconnect driver updates and additions

   - mhi driver updates and additions

   - w1 driver fixes

   - binder speedups and fixes

   - eeprom driver updates

   - coresight driver updates

   - counter driver update

   - new misc driver additions

   - other minor api updates

  All of these, EXCEPT for the final Kconfig build fix for 32bit
  systems, have been in linux-next for a while with no reported issues.
  The Kconfig fixup went in 29 hours ago, so might have missed the
  latest linux-next, but was acked by everyone involved"

* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
  misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
  misc: delete Makefile.rej
  binder: fix hang of unregistered readers
  misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
  virtio: add missing MODULE_DESCRIPTION() macro
  agp: uninorth: add missing MODULE_DESCRIPTION() macro
  spmi: add missing MODULE_DESCRIPTION() macros
  dev/parport: fix the array out-of-bounds risk
  samples: configfs: add missing MODULE_DESCRIPTION() macro
  misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
  misc: keba: Fix missing AUXILIARY_BUS dependency
  slimbus: Fix struct and documentation alignment in stream.c
  MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
  misc: fastrpc: use coherent pool for untranslated Compute Banks
  misc: fastrpc: support complete DMA pool access to the DSP
  misc: fastrpc: add missing MODULE_DESCRIPTION() macro
  misc: fastrpc: Add missing dev_err newlines
  misc: fastrpc: Use memdup_user()
  nvmem: core: Implement force_ro sysfs attribute
  nvmem: Use sysfs_emit() for type attribute
  ...
2024-07-19 15:55:08 -07:00
Linus Torvalds
e2f710f97f ata changes for 6.11-rc1
- ATA PASS-THROUGH sense data cleanups and fixes. (from Igor Pylypiv)
    Highlights:
 
    Store the sense data for ATA PASS-THROUGH commands at the correct offset
    in the sense buffer when using fixed format sense data.
 
    Cleanup the logic related to generating sense data for PASS-THROUGH
    commands. Generating sense data for PASS-THROUGH commands would
    overwrite any eventual (real) sense data received from the device.
 
    Honor the D_SENSE bit when generating sense data for PASS-THROUGH
    commands. (The D_SENSE bit can be set by the user, and determines if
    the returned sense data should be in fixed format or descriptor format.)
 
  - ata port allocation cleanups. (from me)
    Highlights:
 
    Assign the ata port print_id at port allocation time, such that the
    ata_port_* print functions can be used earlier in the init call chain.
 
    Change the ata port port print_id to use ida_alloc(), such that
    print_ids will get reused on rmmod + modprobe, instead of being
    incremented indefinitely.
 
    Remove wrappers that only existed in order to export the internal libata
    functions which they wrapped, and instead export the libata functions
    directly.
 
  - Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm.
    Using this default was not always a good idea before, because it would
    break hot plug support. However, with LPM changes in recent kernels,
    a port marked as external will not enable LPM (in order to not break hot
    plug), so it is now safe to change the default value of this Kconfig.
    All major Linux distros have had SATA_MOBILE_LPM_POLICY set to
    med_power_with_dipm for quite a long time. (from Mario Limonciello)
 
  - Convert ahci-fsl-qoriq device tree binding to yaml format.
    (from Frank Li)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZpZkrAAKCRDJZDGjmcZN
 cr/YAP98wiT4VCiEb1iQBShyYYaxpEiVUPtpHCIa+uLC56IZkgEAvAx9fbwF9uJy
 2VQS1+x03Ui0W+b2irMJcYbTnhXjmQk=
 =HOH5
 -----END PGP SIGNATURE-----

Merge tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata updates from Niklas Cassel:

 - ATA PASS-THROUGH sense data cleanups and fixes (Igor Pylypiv)

   Store the sense data for ATA PASS-THROUGH commands at the correct
   offset in the sense buffer when using fixed format sense data.

   Cleanup the logic related to generating sense data for PASS-THROUGH
   commands. Generating sense data for PASS-THROUGH commands would
   overwrite any eventual (real) sense data received from the device.

   Honor the D_SENSE bit when generating sense data for PASS-THROUGH
   commands. (The D_SENSE bit can be set by the user, and determines if
   the returned sense data should be in fixed format or descriptor
   format)

 - ata port allocation cleanups (me)

   Assign the ata port print_id at port allocation time, such that the
   ata_port_* print functions can be used earlier in the init call
   chain.

   Change the ata port port print_id to use ida_alloc(), such that
   print_ids will get reused on rmmod + modprobe, instead of being
   incremented indefinitely.

   Remove wrappers that only existed in order to export the internal
   libata functions which they wrapped, and instead export the libata
   functions directly.

 - Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm
   (Mario Limonciello)

   Using this default was not always a good idea before, because it
   would break hot plug support. However, with LPM changes in recent
   kernels, a port marked as external will not enable LPM (in order to
   not break hot plug), so it is now safe to change the default value of
   this Kconfig.

   All major Linux distros have had SATA_MOBILE_LPM_POLICY set to
   med_power_with_dipm for quite a long time

 - Convert ahci-fsl-qoriq device tree binding to yaml format (Frank Li)

* tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci
  ata: ahci: Add debug print for external port
  ata,scsi: Remove wrapper ata_sas_port_alloc()
  ata: libata-core: Reuse available ata_port print_ids
  ata: libata: Assign print_id at port allocation time
  ata: libata-core: Remove local_port_no struct member
  ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc()
  ata: libata-core: Remove support for decreasing the number of ports
  ata: libata: Remove unused function declaration for ata_scsi_detect()
  ata,scsi: Remove wrappers ata_sas_tport_{add,delete}()
  ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf
  ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf()
  ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error()
  ata: libata-scsi: Remove redundant sense_buffer memsets
  ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error
  ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1
  ata: libata-scsi: Fix offsets for the fixed format sense data
  dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format
  ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm
2024-07-17 13:26:01 -07:00
Linus Torvalds
3e78198862 for-6.11/block-20240710
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmaOTd8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgppqIEACUr8Vv2FtezvT3OfVSlYWHHLXzkRhwEG5s
 vdk0o7Ow6U54sMjfymbHTgLD0ZOJf3uJ6BI95FQuW41jPzDFVbx4Hy8QzqonMkw9
 1D/YQ4zrVL2mOKBzATbKpoGJzMOzGeoXEueFZ1AYPAX7RrDtP4xPQNfrcfkdE2zF
 LycJN70Vp6lrZZMuI9yb9ts1tf7TFzK0HJANxOAKTgSiPmBmxesjkJlhrdUrgkAU
 qDVyjj7u/ssndBJAb9i6Bl95Do8s9t4DeJq5/6wgKqtf5hClMXzPVB8Wy084gr6E
 rTRsCEhOug3qEZSqfAgAxnd3XFRNc/p2KMUe5YZ4mAqux4hpSmIQQDM/5X5K9vEv
 f4MNqUGlqyqntZx+KPyFpf7kLHFYS1qK4ub0FojWJEY4GrbBPNjjncLJ9+ozR0c8
 kNDaFjMNAjalBee1FxNNH8LdVcd28rrCkPxRLEfO/gvBMUmvJf4ZyKmSED0v5DhY
 vZqKlBqG+wg0EXvdiWEHMDh9Y+q/2XBIkS6NN/Bhh61HNu+XzC838ts1X7lR+4o2
 AM5Vapw+v0q6kFBMRP3IcJI/c0UcIU8EQU7axMyzWtvhog8kx8x01hIj1L4UyYYr
 rUdWrkugBVXJbywFuH/QIJxWxS/z4JdSw5VjASJLIrXy+aANmmG9Wonv95eyhpUv
 5iv+EdRSNA==
 =wVi8
 -----END PGP SIGNATURE-----

Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe updates via Keith:
     - Device initialization memory leak fixes (Keith)
     - More constants defined (Weiwen)
     - Target debugfs support (Hannes)
     - PCIe subsystem reset enhancements (Keith)
     - Queue-depth multipath policy (Redhat and PureStorage)
     - Implement get_unique_id (Christoph)
     - Authentication error fixes (Gaosheng)

 - MD updates via Song
     - sync_action fix and refactoring (Yu Kuai)
     - Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
       Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)

 - Fix loop detach/open race (Gulam)

 - Fix lower control limit for blk-throttle (Yu)

 - Add module descriptions to various drivers (Jeff)

 - Add support for atomic writes for block devices, and statx reporting
   for same. Includes SCSI and NVMe (John, Prasad, Alan)

 - Add IO priority information to block trace points (Dongliang)

 - Various zone improvements and tweaks (Damien)

 - mq-deadline tag reservation improvements (Bart)

 - Ignore direct reclaim swap writes in writeback throttling (Baokun)

 - Block integrity improvements and fixes (Anuj)

 - Add basic support for rust based block drivers. Has a dummy null_blk
   variant for now (Andreas)

 - Series converting driver settings to queue limits, and cleanups and
   fixes related to that (Christoph)

 - Cleanup for poking too deeply into the bvec internals, in preparation
   for DMA mapping API changes (Christoph)

 - Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
   Ming, Zhu, Damien, Christophe, Chaitanya)

* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
  floppy: add missing MODULE_DESCRIPTION() macro
  loop: add missing MODULE_DESCRIPTION() macro
  ublk_drv: add missing MODULE_DESCRIPTION() macro
  xen/blkback: add missing MODULE_DESCRIPTION() macro
  block/rnbd: Constify struct kobj_type
  block: take offset into account in blk_bvec_map_sg again
  block: fix get_max_segment_size() warning
  loop: Don't bother validating blocksize
  virtio_blk: Don't bother validating blocksize
  null_blk: Don't bother validating blocksize
  block: Validate logical block size in blk_validate_limits()
  virtio_blk: Fix default logical block size fallback
  nvmet-auth: fix nvmet_auth hash error handling
  nvme: implement ->get_unique_id
  block: pass a phys_addr_t to get_max_segment_size
  block: add a bvec_phys helper
  blk-lib: check for kill signal in ioctl BLKZEROOUT
  block: limit the Write Zeroes to manually writing zeroes fallback
  block: refacto blkdev_issue_zeroout
  block: move read-only and supported checks into (__)blkdev_issue_zeroout
  ...
2024-07-15 14:20:22 -07:00
Niklas Cassel
f97106b10d ata: ahci: Add debug print for external port
Add a debug print that tells us if LPM is not getting enabled because the
port is external.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-20-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-04 11:52:32 +02:00
Niklas Cassel
0d3603acff ata,scsi: Remove wrapper ata_sas_port_alloc()
The ata_sas_port_alloc() wrapper mainly exists in order to export the
internal libata function which it wraps. The secondary reason is that
it initializes some ata_port struct members.

However, ata_sas_port_alloc() is only used in a single location,
sas_ata_init(), which already performs some ata_port struct member
initialization, so it does not make sense to spread this initialization
out over two separate locations.

Thus, remove the wrapper and instead export the libata function directly,
and move the libsas specific ata_port initialization to sas_ata_init(),
which already does some ata_port initialization.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-19-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-04 11:52:32 +02:00
Niklas Cassel
1228713c75 ata: libata-core: Reuse available ata_port print_ids
Currently, the ata_port print_ids are increased indefinitely, even when
there are lower ids available.

E.g. on first boot you will have ata1-ata6 assigned.
After a rmmod + modprobe, you will instead have ata7-ata12 assigned.

Move to use the ida_alloc() API, such that print_ids will get reused.
This means that even after a rmmod + modprobe, the ports will be assigned
print_ids ata1-ata6.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-18-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-04 11:52:32 +02:00
Niklas Cassel
1c1fbb865d ata: libata: Assign print_id at port allocation time
While the assignment of ap->print_id could have been moved to
ata_host_alloc(), let's simply move it to ata_port_alloc().

If you allocate a port, you want to give it a unique name that can be used
for printing.

By moving the ap->print_id assignment to ata_port_alloc(), means that we
can also remove the ap->print_id assignment from ata_sas_port_alloc().

This will allow a LLD to use the ata_port_*() print functions before
ata_host_register() has been called.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-17-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-04 11:52:32 +02:00
Niklas Cassel
1dd63a6b57 ata: libata-core: Remove local_port_no struct member
ap->local_port_no is simply ap->port_no + 1.
Since ap->local_port_no can be derived from ap->port_no, there is no need
for the ap->local_port_no struct member, so remove ap->local_port_no.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-16-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-04 11:52:32 +02:00
Niklas Cassel
6933eb8e50 ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc()
ata_sas_port_alloc() calls ata_port_alloc() which already assigns ap->lock
so there is no need for ata_sas_port_alloc() to assign it again.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-15-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-04 11:52:32 +02:00