This patch removes some unused code, and make the calculation
of the number of blocks required conditional in order to reduce
the number of times this (potentially expensive) calculation
is done.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In order to distinguish between two differing uevent messages
and to avoid using the (racy) method of reading status from
sysfs in future, this adds some status information to our
uevent messages.
Btw, before anybody says "sysfs isn't racy", I'm aware of that,
but the way that GFS2 was using it (send an ambiugous uevent and
then expect the receiver to read sysfs to find out the status
of the reported operation) was.
The additional benefit of using the new interface is that it
should be possible for a node to recover multiple journals
at the same time, since there is no longer any confusion as
to which journal the status belongs to.
At some future stage, when all the userland programs have been
converted, I intend to remove the old interface.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There was a use-after-free with the GFS2 super block during
umount. This patch moves almost all of the umount code from
->put_super into ->kill_sb, the only bit that cannot be moved
being the glock hash clearing which has to remain as ->put_super
due to umount ordering requirements. As a result its now obvious
that the kfree is the final operation, whereas before it was
hidden in ->put_super.
Also gfs2_jindex_free is then only referenced from a single file
so thats moved and marked static too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The functions which are being moved can all be marked
static in their new locations, since they only have
a single caller each. Their new locations are more
logical than before and some of the functions are
small enough that the compiler might well inline them.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_lock_fs_check_clean() should not be calling gfs2_jindex_hold()
since it doesn't work like rindex hold, despite the comment. That
allows gfs2_jindex_hold() to be moved into ops_fstype.c where it
can be made static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes the two daemons, gfs2_scand and gfs2_glockd
and replaces them with a shrinker which is called from the VM.
The net result is that GFS2 responds better when there is memory
pressure, since it shrinks the glock cache at the same rate
as the VFS shrinks the dcache and icache. There are no longer
any time based criteria for shrinking glocks, they are kept
until such time as the VM asks for more memory and then we
demote just as many glocks as required.
There are potential future changes to this code, including the
possibility of sorting the glocks which are to be written back
into inode number order, to get a better I/O ordering. It would
be very useful to have an elevator based workqueue implementation
for this, as that would automatically deal with the read I/O cases
at the same time.
This patch is my answer to Andrew Morton's remark, made during
the initial review of GFS2, asking why GFS2 needs so many kernel
threads, the answer being that it doesn't :-) This patch is a
net loss of about 200 lines of code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
By moving gfs2_recoverd, we can make an additional function static
and it also leaves only (the already scheduled for removal) gfs2_glockd
in daemon.c.
At the same time the declaration of gfs2_quotad is moved to quota.h
to reflect the new location of gfs2_quotad in a previous patch. Also
the recovery.h and quota.h headers are cleaned up.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Following on from the recent clean up of gfs2_quotad, this patch moves
the processing of "truncate in progress" inodes from the glock workqueue
into gfs2_quotad. This fixes a hang due to the "truncate in progress"
processing requiring glocks in order to complete.
It might seem odd to use gfs2_quotad for this particular item, but
we have to use a pre-existing thread since creating a thread implies
a GFP_KERNEL memory allocation which is not allowed from the glock
workqueue context. Of the existing threads, gfs2_logd and gfs2_recoverd
may deadlock if used for this operation. gfs2_scand and gfs2_glockd are
both scheduled for removal at some (hopefully not too distant) future
point. That leaves only gfs2_quotad whose workload is generally fairly
light and is easily adapted for this extra task.
Also, as a result of this change, it opens the way for a future patch to
make the reading of the inode's information asynchronous with respect to
the glock workqueue, which is another improvement that has been on the list
for some time now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is a clean up of gfs2_quotad prior to giving it an
extra job to do in addition to the current portfolio of updating
the quota and statfs information from time to time.
As a result it has been moved into quota.c allowing one of the
functions it calls to be made static. Also the clean up allows
the two existing functions to have separate timeouts and also
to coexist with its future role of dealing with the "truncate in
progress" inode flag.
The (pointless) setting of gfs2_quotad_secs is removed since we
arrange to only wake up quotad when one of the two timers expires.
In addition the struct gfs2_quota_data is moved into a slab cache,
mainly for easier debugging. It should also be possible to use
a shrinker in the future, rather than the current scheme of scanning
the quota data entries from time to time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Although the glock dumps print quite a lot of information about
the glocks themselves, there are more things which can be
usefully added to the dump realting to the objects themselves.
This patch adds a few more fields to the inode and resource
group lines, which should be useful for debugging.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch moves the final field so that we can get rid
of struct gfs2_rgrpd_host, as promised some time ago. Also
by rearranging the fields slightly, we are able to reduce
the size of the gfs2_rgrpd structure at the same time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves one of the fields of struct gfs2_rgrpd_host into
the struct gfs2_rgrpd with the eventual aim of removing
the struct rgrpd_host completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The final field in gfs2_dinode_host was the i_flags field. Thats
renamed to i_diskflags in order to avoid confusion with the existing
inode flags, and moved into the inode proper at a suitable location
to avoid creating a "hole".
At that point struct gfs2_dinode_host is no longer needed and as
promised (quite some time ago!) it can now be removed completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch moved the i_size field from the gfs2_dinode_host and
following the ext3 convention renames it i_disksize.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves the directory entry count into the proper inode.
Potentially we could get this to share the space used by
something else in the future, but this is one more step
on the way to removing the gfs2_dinode_host structure.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves the generation number from the gfs2_dinode_host
into the gfs2_inode structure. Eventually the plan is to get
rid of the gfs2_dinode_host structure completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is a bug in writepage and delete_inode which allows jdata files to
invalidate pages from the address space without being in a transaction at
the time. This causes problems in case the pages are in the journal. This
patch fixes that case and prevents the resulting oops.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Move the contents of some headers which contained very
little into more sensible places, and remove the original
header files. This should make it easier to find things.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch implements the FIEMAP ioctl for GFS2. We can use the generic
code (aside from a lock order issue, solved as per Ted Tso's suggestion)
for which I've introduced a new variant of the generic function. We also
have one exception to deal with, namely stuffed files, so we do that
"by hand", setting all the required flags.
This has been tested with a modified (I could only find an old version) of
Eric's test program, and appears to work correctly.
This patch does not currently support FIEMAP of xattrs, but the plan is to add
that feature at some future point.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Eric Sandeen <sandeen@redhat.com>
* 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
audit: validate comparison operations, store them in sane form
clean up audit_rule_{add,del} a bit
make sure that filterkey of task,always rules is reported
audit rules ordering, part 2
fixing audit rule ordering mess, part 1
audit_update_lsm_rules() misses the audit_inode_hash[] ones
sanitize audit_log_capset()
sanitize audit_fd_pair()
sanitize audit_mq_open()
sanitize AUDIT_MQ_SENDRECV
sanitize audit_mq_notify()
sanitize audit_mq_getsetattr()
sanitize audit_ipc_set_perm()
sanitize audit_ipc_obj()
sanitize audit_socketcall
don't reallocate buffer in every audit_sockaddr()
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in
<linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to
filesystem specific header files to break the hidden dependency to
struct ext[234]_sb_info.
Also, while at it, convert the macros to static inlines to try make up
for all the times I broke Andrew Morton's tree.
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
x86: setup_per_cpu_areas() cleanup
cpumask: fix compile error when CONFIG_NR_CPUS is not defined
cpumask: use alloc_cpumask_var_node where appropriate
cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
x86: use cpumask_var_t in acpi/boot.c
x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
sched: put back some stack hog changes that were undone in kernel/sched.c
x86: enable cpus display of kernel_max and offlined cpus
ia64: cpumask fix for is_affinity_mask_valid()
cpumask: convert RCU implementations, fix
xtensa: define __fls
mn10300: define __fls
m32r: define __fls
h8300: define __fls
frv: define __fls
cris: define __fls
cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
cpumask: zero extra bits in alloc_cpumask_var_node
cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
cpumask: convert mm/
...
... just make it a binfmt handler like #! one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They are actually alpha vs. i386/arm/m68k i.e. ecoff vs. aout.
In the only place where we actually tried to handle arm and i386/m68k in
different ways (START_DATA() in coredump handling), the arm variant
works for all of them (i386 and m68k have u.start_code set to 0).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (33 commits)
UBIFS: add more useful debugging prints
UBIFS: print debugging messages properly
UBIFS: fix numerous spelling mistakes
UBIFS: allow mounting when short of space
UBIFS: fix writing uncompressed files
UBIFS: fix checkpatch.pl warnings
UBIFS: fix sparse warnings
UBIFS: simplify make_free_space
UBIFS: do not lie about used blocks
UBIFS: restore budg_uncommitted_idx
UBIFS: always commit on unmount
UBIFS: use ubi_sync
UBIFS: always commit in sync_fs
UBIFS: fix file-system synchronization
UBIFS: fix constants initialization
UBIFS: avoid unnecessary calculations
UBIFS: re-calculate min_idx_size after the commit
UBIFS: use nicer 64-bit math
UBIFS: fix available blocks count
UBIFS: various comment improvements and fixes
...
* 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (140 commits)
KVM: MMU: handle large host sptes on invlpg/resync
KVM: Add locking to virtual i8259 interrupt controller
KVM: MMU: Don't treat a global pte as such if cr4.pge is cleared
MAINTAINERS: Maintainership changes for kvm/ia64
KVM: ia64: Fix kvm_arch_vcpu_ioctl_[gs]et_regs()
KVM: x86: Rework user space NMI injection as KVM_CAP_USER_NMI
KVM: VMX: Fix pending NMI-vs.-IRQ race for user space irqchip
KVM: fix handling of ACK from shared guest IRQ
KVM: MMU: check for present pdptr shadow page in walk_shadow
KVM: Consolidate userspace memory capability reporting into common code
KVM: Advertise the bug in memory region destruction as fixed
KVM: use cpumask_var_t for cpus_hardware_enabled
KVM: use modern cpumask primitives, no cpumask_t on stack
KVM: Extract core of kvm_flush_remote_tlbs/kvm_reload_remote_mmus
KVM: set owner of cpu and vm file operations
anon_inodes: use fops->owner for module refcount
x86: KVM guest: kvm_get_tsc_khz: return khz, not lpj
KVM: MMU: prepopulate the shadow on invlpg
KVM: MMU: skip global pgtables on sync due to cr3 switch
KVM: MMU: collapse remote TLB flushes on root sync
...
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/devpts/inode.c:324: warning: 'compare_init_pts_sb' defined but not used
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just nail the oddments now while this code is being touched
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support containers, allow multiple instances of devpts filesystem, such
that indices of ptys allocated in one instance are independent of ptys
allocated in other instances of devpts.
But to preserve backward compatibility, enable this support for multiple
instances only if:
- CONFIG_DEVPTS_MULTIPLE_INSTANCES is set to Y, and
- '-o newinstance' mount option is specified while mounting devpts
To use multi-instance mount, a container startup script could:
$ ns_exec -cm /bin/bash
$ umount /dev/pts
$ mount -t devpts -o newinstance lxcpts /dev/pts
$ mount -o bind /dev/pts/ptmx /dev/ptmx
$ /usr/sbin/sshd -p 1234
where 'ns_exec -cm /bin/bash' is calls clone() with CLONE_NEWNS flag and execs
/bin/bash in the child process. A pty created by the sshd is not visible in
the original mount of /dev/pts.
USER-SPACE-IMPACT:
- See Documentation/fs/devpts.txt (included in next patch) for user-
space impact in multi-instance and mixed-mode operation.
TODO:
- Update mount(8), pts(4) man pages. Highlight impact of not
redirecting /dev/ptmx to /dev/pts/ptmx after a multi-instance mount.
Changelog[v6]:
- [Dave Hansen] Use new get_init_pts_sb() interface
- [Serge Hallyn] Don't bother displaying 'newinstance' in show_options
- [Serge Hallyn] Use macros (PARSE_REMOUNT/PARSE_MOUNT) instead of 0/1.
- [Serge Hallyn] Check error return from get_sb_single() (now
get_init_pts_sb())
- devpts_pty_kill(): don't dput error dentries
Changelog[v5]:
- Move get_sb_ref() definition to earlier patch
- Move usage info to Documentation/filesystems/devpts.txt (next patch)
- Make ptmx node even in init_pts_ns, now that default mode is 0000
(defined in earlier patch, enabled here).
- Cache ptmx dentry and use to update mode during remount
(defined in earlier patch, enabled here).
- Bugfix: explicitly ignore newinstance on remount (if newinstance was
specified on remount of initial mount, it would be ignored but
/proc/mounts would imply that the option was set)
Changelog[v4]:
- Update patch description to address H. Peter Anvin's comments
- Consolidate multi-instance mode code under new config token,
CONFIG_DEVPTS_MULTIPLE_INSTANCE.
- Move usage-details from patch description to
Documentation/fs/devpts.txt
Changelog[v3]:
- Rename new mount option to 'newinstance'
- Create ptmx nodes only in 'newinstance' mounts
- Bugfix: parse_mount_options() modifies @data but since we need to
parse the @data twice (once in devpts_get_sb() and once during
do_remount_sb()), parse a local copy of @data in devpts_get_sb().
(restructured code in devpts_get_sb() to fix this)
Changelog[v2]:
- Support both single-mount and multiple-mount semantics and
provide '-onewmnt' option to select the semantics.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
See comments in the function header for details. The new interface will
be used in a follow-on patch.
Changelog [v2]:
[Dave Hansen] Replace get_sb_ref() in fs/super.c with get_init_pts_sb()
and make the new interface private to devpts
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/dev/ptmx is closely tied to the devpts filesystem. An open of /dev/ptmx,
allocates the next pty index and the associated device shows up in the
devpts fs as /dev/pts/n.
Wih multiple instancs of devpts filesystem, during an open of /dev/ptmx
we would be unable to determine which instance of the devpts is being
accessed.
So we move the 'ptmx' node into /dev/pts and use the inode of the 'ptmx'
node to identify the superblock and hence the devpts instance. This patch
adds ability for the kernel to internally create the [ptmx, c, 5:2] device
when mounting devpts filesystem. Since the ptmx node in devpts is new and
may surprise some userspace scripts, the default permissions for the new
node is 0000. These permissions can be changed either using chmod or by
remounting with the new '-o ptmxmode=0666' mount option.
Changelog[v5]:
- [Serge Hallyn bugfix]: Letting new_inode() assign inode number to
ptmx can collide with hand-assigning inode numbers to ptys. So,
hand-assign specific inode number to ptmx node also.
- [Serge Hallyn]: Maybe safer to grab root dentry mutex while creating
ptmx node
- [Bugfix with Serge Hallyn] Replace lookup_one_len() in mknod_ptmx()
wih d_alloc_name() (lookup during ->get_sb() locks up system). To
simplify patchset, fold the ptmx_dentry patch into this.
Changelog[v4]:
- Change default permissions of pts/ptmx node to 0000.
- Move code for ptmxmode under #ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES.
Changelog[v3]:
- Rename ptmx_mode to ptmxmode (for consistency with 'newinstance')
Changelog[v2]:
- [H. Peter Anvin] Remove mknod() system call support and create the
ptmx node internally.
Changelog[v1]:
- Earlier version of this patch enabled creating /dev/pts/tty as
well. As pointed out by Al Viro and H. Peter Anvin, that is not
really necessary.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move code to parse mount options into a separate function so it can
(later) be shared between mount and remount operations.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With support for multiple mounts of devpts, the 'config' structure really
represents per-mount options rather than config parameters. Rename 'config'
structure to 'pts_mount_opts' and store it in the super-block.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To enable multiple mounts of devpts, 'allocated_ptys' must be a per-mount
variable rather than a global variable. Move 'allocated_ptys' into the
super_block's s_fs_info.
Changelog[v2]:
Define and use DEVPTS_SB() wrapper.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the 'devpts_root' global variable and find the root dentry using
the super_block. The super-block can be found from the device inode, using
the new wrapper, pts_sb_from_inode().
Changelog: This patch is based on an earlier patchset from Serge Hallyn
and Matt Helsley.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (34 commits)
nfsd race fixes: jfs
nfsd race fixes: reiserfs
nfsd race fixes: ext4
nfsd race fixes: ext3
nfsd race fixes: ext2
nfsd/create race fixes, infrastructure
filesystem notification: create fs/notify to contain all fs notification
fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilization
kill ->dir_notify()
filp_cachep can be static in fs/file_table.c
fix f_count description in Documentation/filesystems/files.txt
make INIT_FS use the __RW_LOCK_UNLOCKED initialization
take init_fs to saner place
kill vfs_permission
pass a struct path * to may_open
kill walk_init_root
remove incorrect comment in inode_permission
expand some comments (d_path / seq_path)
correct wrong function name of d_put in kernel document and source comment
fix switch_names() breakage in short-to-short case
...
... and the same for reiserfs. The difference here is that we need
insert_inode_locked4() to match iget5_locked().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* make ext2_new_inode() put the inode into icache in locked state
* do not unlock until the inode is fully set up; otherwise nfsd
might pick it in half-baked state.
* make sure that ext2_new_inode() does *not* lead to two inodes with the
same inumber hashed at the same time; otherwise a bogus fhandle coming
from nfsd might race with inode creation:
nfsd: iget_locked() creates inode
nfsd: try to read from disk, block on that.
ext2_new_inode(): allocate inode with that inumber
ext2_new_inode(): insert it into icache, set it up and dirty
ext2_write_inode(): get the relevant part of inode table in cache,
set the entry for our inode (and start writing to disk)
nfsd: get CPU again, look into inode table, see nice and sane on-disk
inode, set the in-core inode from it
oops - we have two in-core inodes with the same inumber live in icache,
both used for IO. Welcome to fs corruption...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
