We have seen isolated cases (very few, I might add) of o2hb not detecting all
live nodes on startup. One plausible reasoning for it is that other node had
a hb io delay at the same time. The live threshold set at 2 (as low as it can
be) could be increased to ameliorate the situation.
But increasing the threshold directly affects mount time. Currently it takes
around 5 secs to mount a volume in o2cb cluster with local heartbeat. Increasing
the threshold will make mounts even slower. As the issue itself is rare, we have
left things as they are for the local heartbeat mode.
However we can improve the situation for global heartbeat mode as in that mode,
we start the heartbeat much before the mount.
This patch doubles the live threshold for the start of the first region in
global heartbeat mode.
Addresses internal Oracle bug#10635585.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch fixes a bug in the o2dlm protocol negotiation in that it is using
the builtin version rather than the negotiated version during the domain
join. This causes join errors when a node having kernel >= 2.6.37 joins
a cluster with nodes having kernels < 2.6.37.
This only affects the o2cb cluster stack.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reported-by: Jacek Stepniewski <Jacek.Stepniewski@agora.pl>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
In the case of removing a partial extent record which covers a hole, current
punching-hole logic will try to remove more than the length of whole extent
record, which leads to the failure of following assert(fs/ocfs2/alloc.c):
5507 BUG_ON(cpos < le32_to_cpu(rec->e_cpos) || trunc_range > rec_range);
This patch tries to skip existing hole at the last attempt of removing a partial
extent record, what's more, it also adds some necessary comments for better
understanding of punching-hole codes.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
CLANG found that there is a path that has data_ac uninitialized,
this place
2917 /* This gets us the dx_root */
2918 ret = ocfs2_reserve_new_metadata_blocks(osb, 1, &meta_ac);
2919 if (ret) {
3
Taking true branch
2920 mlog_errno(ret);
2921 goto out;
4
Control jumps to line 3168
2922 }
Goes to the out: label without data_ac being initialized.
Ciao, Marcus
Signed-Off-By: Marcus Meissner <meissner@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: do not use i_wrbuffer_ref as refcount for Fb cap
ceph: fix list_add in ceph_put_snap_realm
ceph: print debug message before put mds session
We increments i_wrbuffer_ref when taking the Fb cap. This breaks
the dirty page accounting and causes looping in
__ceph_do_pending_vmtruncate, and ceph client hangs.
This bug can be reproduced occasionally by running blogbench.
Add a new field i_wb_ref to inode and dedicate it to Fb reference
counting.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The mds session, s, could be freed during ceph_put_mds_session.
Move dout before ceph_put_mds_session.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: fix race condition in AIL push trigger
xfs: make AIL target updates and compares 32bit safe.
xfs: always push the AIL to the target
xfs: exit AIL push work correctly when AIL is empty
xfs: ensure reclaim cursor is reset correctly at end of AG
Some cases (e.g. ecryptfs) can call ->dentry_revalidate with NULL
nameidata.
https://bugzilla.kernel.org/show_bug.cgi?id=34732
Tyler Hicks pointed out that this bug was introduced by commit
e7c0a16786 "fuse: make fuse_dentry_revalidate() RCU aware"
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
After having applied commit 9954e7af14 ("nilfs2: add free
entries count only if clear bit operation succeeded"), a free routine
of nilfs came to fall into an infinite loop, outputting the same
message endlessly:
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed ...
That patch broke the routine so that a loop counter is never updated
in an abnormal state. This fixes the regression.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The recent conversion of the xfsaild functionality to a work queue
introduced a hard-to-hit log space grant hang. One is caused by a
race condition in determining whether there is a psh in progress or
not.
The XFS_AIL_PUSHING_BIT is used to determine whether a push is
currently in progress. When the AIL push work completes, it checked
whether the target changed and cleared the PUSHING bit to allow a
new push to be requeued. The race condition is as follows:
Thread 1 push work
smp_wmb()
smp_rmb()
check ailp->xa_target unchanged
update ailp->xa_target
test/set PUSHING bit
does not queue
clear PUSHING bit
does not requeue
Now that the push target is updated, new attempts to push the AIL
will not trigger as the push target will be the same, and hence
despite trying to push the AIL we won't ever wake it again.
The fix is to ensure that the AIL push work clears the PUSHING bit
before it checks if the target is unchanged.
As a result, both push triggers operate on the same test/set bit
criteria, so even if we race in the push work and miss the target
update, the thread requesting the push will still set the PUSHING
bit and queue the push work to occur. For safety sake, the same
queue check is done if the push work detects the target change,
though only one of the two will will queue new work due to the use
of test_and_set_bit() checks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit e4d3c4a43b)
The recent conversion of the xfsaild functionality to a work queue
introduced a hard-to-hit log space grant hang. One of the problems
noticed was that updates of the push target are not 32 bit safe as
the target is a 64 bit value.
We cannot copy a 64 bit LSN without the possibility of corrupting
the result when racing with another updating thread. We have
function to do this update safely without needing to care about
32/64 bit issues - xfs_trans_ail_copy_lsn() - so use that when
updating the AIL push target.
Also move the reading of the target in the push work inside the AIL
lock, and use XFS_LSN_CMP() for the unlocked comparison during work
termination to close read holes as well.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit fd5670f22f)
The recent conversion of the xfsaild functionality to a work queue
introduced a hard-to-hit log space grant hang. One of the problems
discovered is a target mismatch between the item pushing loop and
the target itself.
The push trigger checks for the target increasing (i.e. new target >
current) while the push loop only pushes items that have a LSN <
current. As a result, we can get the situation where the push target
is X, the items at the tail of the AIL have LSN X and they don't get
pushed. The push work then completes thinking it is done, and cannot
be restarted until the push target increases to >= X + 1. If the
push target then never increases (because the tail is not moving),
then we never run the push work again and we stall.
Fix it by making sure log items with a LSN that matches the target
exactly are pushed during the loop.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit cb64026b6e)
The recent conversion of the xfsaild functionality to a work queue
introduced a hard-to-hit log space grant hang. The main cause is a
regression where a work exit path fails to clear the PUSHING state
and recheck the target correctly.
Make both exit paths do the same PUSHING bit clearing and target
checking when the "no more work to be done" condition is hit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit ea35a20021)
On a 32 bit highmem PowerPC machine, the XFS inode cache was growing
without bound and exhausting low memory causing the OOM killer to be
triggered. After some effort, the problem was reproduced on a 32 bit
x86 highmem machine.
The problem is that the per-ag inode reclaim index cursor was not
getting reset to the start of the AG if the radix tree tag lookup
found no more reclaimable inodes. Hence every further reclaim
attempt started at the same index beyond where any reclaimable
inodes lay, and no further background reclaim ever occurred from the
AG.
Without background inode reclaim the VM driven cache shrinker
simply cannot keep up with cache growth, and OOM is the result.
While the change that exposed the problem was the conversion of the
inode reclaim to use work queues for background reclaim, it was not
the cause of the bug. The bug was introduced when the cursor code
was added, just waiting for some weird configuration to strike....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-By: Christian Kujau <lists@nerdbynature.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit b223221956)
Linux kernel excludes guard page when performing mlock on a VMA with
down-growing stack. However, some architectures have up-growing stack
and locking the guard page should be excluded in this case too.
This patch fixes lvm2 on PA-RISC (and possibly other architectures with
up-growing stack). lvm2 calculates number of used pages when locking and
when unlocking and reports an internal error if the numbers mismatch.
[ Patch changed fairly extensively to also fix /proc/<pid>/maps for the
grows-up case, and to move things around a bit to clean it all up and
share the infrstructure with the /proc bits.
Tested on ia64 that has both grow-up and grow-down segments - Linus ]
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Tested-by: Tony Luck <tony.luck@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hpfs:
HPFS: Remove unused variable
HPFS: Move declaration up, so that there are no out-of-scope pointers
HPFS: Fix some unaligned accesses
HPFS: Fix endianity. Make hpfs work on big-endian machines
HPFS: Implement fsync for hpfs
HPFS: Fix a bug that filesystem was not marked dirty when remounting it
HPFS: Restrict uid and gid to 16-bit values
HPFS: When marking or clearing the dirty bit, sync the filesystem
HPFS: Use types with defined width
HPFS: Remove mark_inode_dirty
HPFS: Remove CR/LF conversion option
HPFS: Remove remaining locks
HPFS: Introduce a global mutex and lock it on every callback from VFS.
HPFS: Make HPFS compile on preempt and SMP
Move declaration up, so that there are no out-of-scope pointers
Reported-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a bug that filesystem was not marked dirty when remounting it
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Restrict uid and gid to 16-bit values.
HPFS stores only 2 bytes in the EAs.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When marking or clearing the dirty bit, sync the filesystem
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use types with defined width
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove CR/LF conversion option
It is unused anyway. It was used on 2.2 kernels or so.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove remaining locks
Because of a new global per-fs lock, no other locks are needed
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce a global mutex and lock it on every callback from VFS.
Performance doesn't matter, reviewing the whole code for locking correctness
would be too complicated, so simply lock it all.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make HPFS compile on preempt and SMP
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: handle errors from coalesce_t2
cifs: refactor mid finding loop in cifs_demultiplex_thread
cifs: sanitize length checking in coalesce_t2 (try #3)
cifs: check for bytes_remaining going to zero in CIFS_SessSetup
cifs: change bleft in decode_unicode_ssetup back to signed type
Otherwise corrupted EFI partition tables can cause total confusion.
Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: do not call __mark_dirty_inode under i_lock
libceph: fix ceph_osdc_alloc_request error checks
ceph: handle ceph_osdc_new_request failure in ceph_writepages_start
libceph: fix ceph_msg_new error path
ceph: use ihold() when i_lock is held
The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.
Signed-off-by: Sage Weil <sage@newdream.net>
In particular, s_freeing_list needs to be initialized early, since it is
used on some of the error paths when mounts fail. The mapping inode,
for example, would be initialized and then free'd on an error path
before s_freeing_list was initialized, but the inode drop operation
needs the s_freeing_list to be set up.
Normally you'd never see this, because not only is logfs fairly rare,
but a successful mount will never have any issues.
Reported-by: werner <w.landgraf@ru.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
cifs_demultiplex_thread calls coalesce_t2 to try and merge follow-on t2
responses into the original mid buffer. coalesce_t2 however can return
errors, but the caller doesn't handle that situation properly. Fix the
thread to treat such a case as it would a malformed packet. Mark the
mid as being malformed and issue the callback.
Cc: stable@kernel.org
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...to reduce the extreme indentation. This should introduce no
behavioral changes.
Cc: stable@kernel.org
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for-linus' of git://git.infradead.org/ubifs-2.6:
UBIFS: seek journal heads to the latest bud in replay
UBIFS: do not free write-buffers when in R/O mode
This is the second fix of the following symptom:
UBIFS error (pid 34456): could not find an empty LEB
which sometimes happens after power cuts when we mount the file-system - UBIFS
refuses it with the above error message which comes from the
'ubifs_rcvry_gc_commit()' function. I can reproduce this using the integck test
with the UBIFS power cut emulation enabled.
Analysis of the problem.
Currently UBIFS replay seeks the journal heads to the last _replayed_ bud.
But the buds are replayed out-of-order, so the replay basically seeks journal
heads to the "random" bud belonging to this head, and not to the _last_ one.
The result of this is that the GC head may be seeked to a full LEB with no free
space, or very little free space. And 'ubifs_rcvry_gc_commit()' tries to find a
fully or mostly dirty LEB to match the current GC head (because we need to
garbage-collect that dirty LEB at one go, because we do not have @c->gc_lnum).
So 'ubifs_find_dirty_leb()' fails and we fall back to finding an empty LEB and
also fail. As a result - recovery fails and mounting fails.
This patch teaches the replay to initialize the GC heads exactly to the latest
buds, i.e. the buds which have the largest sequence number in corresponding
log reference nodes.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org
Currently UBIFS has a small optimization - it frees write-buffers when it is
re-mounted from R/W mode to R/O mode. Of course, when it is mounted R/O, it
does not allocate write-buffers as well.
This optimization is nice but it leads to subtle problems and complications
in recovery, which I can reproduce using the integck test. The symptoms are
that after a power cut the file-system cannot be mounted if we first mount
it R/O, and then re-mount R/W - 'ubifs_rcvry_gc_commit()' prints:
UBIFS error (pid 34456): could not find an empty LEB
Analysis of the problem.
When mounting R/W, the reply process sets journal heads to buds [1], but
when mounting R/O - it does not do this, because the write-buffers are not
allocated. So 'ubifs_rcvry_gc_commit()' works completely differently for the
same file-system but for the following 2 cases:
1. mounting R/W after a power cut and recover
2. mounting R/O after a power cut, re-mounting R/W and run deferred recovery
In the former case, we have journal heads seeked to the a bud, in the latter
case, they are non-seeked (wbuf->lnum == -1). So in the latter case we do not
try to recover the GC LEB by garbage-collecting to the GC head, but we just
try to find an empty LEB, and there may be no empty LEBs, so we just fail.
On the other hand, in the former case (mount R/W), we are able to make a GC LEB
(@c->gc_lnum) by garbage-collecting.
Thus, let's remove this small nice optimization and always allocate
write-buffers. This should not make too big difference - we have only 3
of them, each of max. write unit size, which is usually 2KiB. So this is
about 6KiB of RAM for the typical case, and only when mounted R/O.
[1]: Note, currently the replay process is setting (seeking) the journal heads
to _some_ buds, not necessarily to the buds which had been the journal heads
before the power cut happened. This will be fixed separately.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org
There are a couple of places in this code where these values can wrap or
go negative, and that could potentially end up overflowing the buffer.
Ensure that that doesn't happen. Do all of the length calculation and
checks first, and only perform the memcpy after they pass.
Also, increase some stack variables to 32 bits to ensure that they don't
wrap without being detected.
Finally, change the error codes to be a bit more descriptive of any
problems detected. -EINVAL isn't very accurate.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's possible that when we go to decode the string area in the
SESSION_SETUP response, that bytes_remaining will be 0. Decrementing it at
that point will mean that it can go "negative" and wrap. Check for a
bytes_remaining value of 0, and don't try to decode the string area if
that's the case.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The buffer length checks in this function depend on this value being a
signed data type, but 690c522fa converted it to an unsigned type.
Also, eliminate a problem with the null termination check in the same
function. cifs_strndup_from_ucs handles that situation correctly
already, and the existing check could potentially lead to a buffer
overrun since it increments bleft without checking to see whether it
falls off the end of the buffer.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
nfs: don't lose MS_SYNCHRONOUS on remount of noac mount
NFS: Return meaningful status from decode_secinfo()
NFSv4: Ensure we request the ordinary fileid when doing readdirplus
NFSv4: Ensure that clientid and session establishment can time out
SUNRPC: Allow RPC calls to return ETIMEDOUT instead of EIO
NFSv4.1: Don't loop forever in nfs4_proc_create_session
NFSv4: Handle NFS4ERR_WRONGSEC outside of nfs4_handle_exception()
NFSv4.1: Don't update sequence number if rpc_task is not sent
NFSv4.1: Ensure state manager thread dies on last umount
SUNRPC: Fix the SUNRPC Kerberos V RPCSEC_GSS module dependencies
NFS: Use correct variable for page bounds checking
NFS: don't negotiate when user specifies sec flavor
NFS: Attempt mount with default sec flavor first
NFS: flav_array honors NFS_MAX_SECFLAVORS
NFS: Fix infinite loop in gss_create_upcall()
Don't mark_inode_dirty_sync() while holding lock
NFS: Get rid of pointless test in nfs_commit_done
NFS: Remove unused argument from nfs_find_best_sec()
NFS: Eliminate duplicate call to nfs_mark_request_dirty
NFS: Remove dead code from nfs_fs_mount()
Azurit reports large increases in system time after 2.6.36 when running
Apache. It was bisected down to a892e2d7dc ("vfs: use kmalloc()
to allocate fdmem if possible").
That patch caused the vfs to use kmalloc() for very large allocations and
this is causing excessive work (and presumably excessive reclaim) within
the page allocator.
Fix it by falling back to vmalloc() earlier - when the allocation attempt
would have been considered "costly" by reclaim.
Reported-by: azurIt <azurit@pobox.sk>
Tested-by: azurIt <azurit@pobox.sk>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
