Looking backward for the first space from the end of a line in
/proc/pid/maps does not find the start of the pathname of the mapped
file if it contains a space.
Since the only slashes we have in this file occur in the (absolute!)
pathname column of file mappings, looking for the first slash in a
line is a safe method to find the name.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090624190835.GA25548@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Much of perf's libraries comes from the Git project. I noticed
that the files (in tools/perf/util/*.[ch] and elsewhere) are
quite spartan wrt. credits, so lets add a CREDITS file that
includes an (incomplete!) list of main contributors.
Thanks guys, these libraries are really useful. Special thanks
go to Johannes Schindelin and Junio C Hamano for coming up with
this list.
List-Composed-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove dead code and do some code alignment.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245847774.2681.2.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
size_t res cannot be less than 0 - fread returns 0 on error.
[ Updated by: René Scharfe <rene.scharfe@lsrfire.ath.cx> ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Junio C Hamano <gitster@pobox.com>
LKML-Reference: <4A3FB479.2090902@lsrfire.ath.cx>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Error message should use stderr for verbose (-v), otherwise
message will be lost for:
$ ./perf stat -v <cmd> > /dev/null
For example on AMD bus-cycles event is not available so now
it looks like:
$ ./perf stat -v -e bus-cycles ls > /dev/null
Error: counter 0, sys_perf_counter_open() syscall returned with -1 (Invalid argument)
Performance counter stats for 'ls':
<not counted> bus-cycles
0.006765877 seconds time elapsed.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245757369.3776.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Martin Schwidefsky reported "perf report" symbol resolution
problems on S390.
Since we only report MMAP, not MUNMAP, we have to deal with
overlapping maps.
We used to simply throw out the old map on the assumption whole
maps got unmapped. This obviously doesn't deal with partial
unmaps. However it appears some dynamic linkers do fancy
partial unmaps (s390), so do something more elaborate and
truncate the old maps, only removing them when they've been
fully covered.
This resolves (part of) the S390 symbol resolution problems.
Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
-l is not supported, it should be -S for scale.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245703959.6167.16.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"faults" should be alias for "page-faults"
Also fixed alignment and 80 characters issue
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245683846.12092.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Print more symbol relocation related info under -vv.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By introducing alias member in event_symbol :
1. duplicate lines are removed, like:
cpu-cycles and cycles
branch-instructions and branches
context-switches and cs
cpu-migrations and migrations
2. We can also add alias for another events.
Now ./perf list looks like :
List of pre-defined events (to be used in -e):
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
cache-references [Hardware event]
cache-misses [Hardware event]
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cpu-clock [Software event]
task-clock [Software event]
page-faults [Software event]
faults [Software event]
minor-faults [Software event]
major-faults [Software event]
context-switches OR cs [Software event]
cpu-migrations OR migrations [Software event]
rNNN [raw hardware event descriptor]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669268.17153.8.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define separate declarations for H/W and S/W events to:
1. Shorten name to save some space so that we can add more members
2. Fix alignment
3. Avoid declaring HARDWARE/SOFTWARE again and again.
Removed unused CR(x, y)
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669194.17153.6.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lucas De Marchi reported that perf report and perf annotate
displays mismatching profile if a perf.data is analyzed on
an older kernel - even if the correct vmlinux is specified
via the -k option.
The reason is the fallback path in util/symbol.c:dso__load_kernel():
int dso__load_kernel(struct dso *self, const char *vmlinux,
symbol_filter_t filter, int verbose)
{
int err = -1;
if (vmlinux)
err = dso__load_vmlinux(self, vmlinux, filter, verbose);
if (err)
err = dso__load_kallsyms(self, filter, verbose);
return err;
}
dso__load_vmlinux() returns negative on error, but on success it
returns the number of symbols loaded - which confuses the function
to load the kallsyms.
This is normally harmless, as reporting is usually performed on the
same kernel that is analyzed - but if there's a mismatch then we
load the wrong kallsyms and create a non-sensical symbol tree.
The fix is to only fall back to kallsyms on errors.
Reported-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Building perfcounter tools raises the following warnings:
builtin-record.c: In function ‘atexit_header’:
builtin-record.c:464: erreur: ignoring return value of ‘pwrite’, declared with attribute warn_unused_result
builtin-record.c: In function ‘__cmd_record’:
builtin-record.c:503: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
builtin-report.c: In function ‘__cmd_report’:
builtin-report.c:1403: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
This patch handles these IO return values.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1245456100-5477-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long. This causes compiler warnings every time we
print a __u64 value with %Lx.
Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8. These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.
The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__". The other changes are:
* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
to kill two remaining warnings.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a data file header so we can transfer data between record and report.
LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update the tools to reflect the new callchain sampling format.
LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make it easier to use parent filtering - default to a filtered
output. Also add the parent column so that we get collapsing but
dont display it by default.
add --no-exclude-other to override this.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make use of the new ->data_tail mechanism to tell kernel-space
about user-space draining the data stream. Emit lost events
(and display them) if they happen.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On 64-bit powerpc, perf needs to be built as a 64-bit executable.
This arranges to add the -m64 flag to CFLAGS if we are running on
a 64-bit machine, indicated by the result of uname -m ending in "64".
This means that we'll use -m64 on x86_64 machines as well.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: benh@kernel.crashing.org
LKML-Reference: <19000.55666.866148.559620@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce isprint() to print out raw event dumps to ASCII, etc.
(This is an extension to upstream Git's ctype.c.)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
[ removed openssl.h inclusion from util.h - it leaked ctype.h ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add boundary checks for call-chain events. In case of corrupted
entries we could crash otherwise.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of the ambigious 'call' naming use the much more
specific 'parent' naming:
- rename --call <regex> to --parent <regex>
- rename --sort call to --sort parent
- rename [unmatched] to [other] - to signal that this is not
an error but the inverse set
Also add pagefaults to the default parent-symbol pattern too,
as it's a 'syscall overhead category' in a sense.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The Git utils came with a ctype replacement that doesn't provide
isprint(). Add a replacement.
Solves a build bug on certain distros.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement sorting by callchain symbols, --sort <call>.
It will create a new column which will show a match to
--call $regex or "[unmatched]".
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yong Wang reported the following compiler warning:
builtin-report.c: In function 'process_overflow_event':
builtin-report.c:984: error: cast to pointer from integer of different size
Which happens because we try to print ->ips[] out with a limited
format, losing the high 32 bits. Print it out using %016Lx instead.
Reported-by: Yong Wang <yong.y.wang@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Take advantage of call-graph percounter sampling/recording to
display a non-trivial histogram: the true, collapsed/summarized
cost measurement, on a per system call total overhead basis:
aldebaran:~/linux/linux/tools/perf> ./perf record -g -a -f ~/hackbench 10
aldebaran:~/linux/linux/tools/perf> ./perf report -s symbol --syscalls | head -10
#
# (3536 samples)
#
# Overhead Symbol
# ........ ......
#
40.75% [k] sys_write
40.21% [k] sys_read
4.44% [k] do_nmi
...
This is done by accounting each (reliable) call-chain that chains back
to a given system call to that system call function.
[ So in the above example we can see that hackbench spends about 40% of
its total time somewhere in sys_write() and 40% somewhere in
sys_read(), the rest of the time is spent in user-space. The time
is not spent in sys_write() _itself_ but in one of its many child
functions. ]
Or, a recording of a (source files are already in the page-cache) kernel build:
$ perf record -g -m 512 -f -- make -j32 kernel
$ perf report -s s --syscalls | grep '\[k\]' | grep -v nmi
4.14% [k] do_page_fault
1.20% [k] sys_write
1.10% [k] sys_open
0.63% [k] sys_exit_group
0.48% [k] smp_apic_timer_interrupt
0.37% [k] sys_read
0.37% [k] sys_execve
0.20% [k] sys_mmap
0.18% [k] sys_close
0.14% [k] sys_munmap
0.13% [k] sys_poll
0.09% [k] sys_newstat
0.07% [k] sys_clone
0.06% [k] sys_newfstat
0.05% [k] sys_access
0.05% [k] schedule
Shows the true total cost of each syscall variant that gets used
during a kernel build. This profile reveals it that pagefaults are
the costliest, followed by read()/write().
An interesting detail: timer interrupts cost 0.5% - or 0.5 seconds
per 100 seconds of kernel build-time. (this was done with HZ=1000)
The summary is done in 'perf report', i.e. in the post-processing
stage - so once we have a good call-graph recording, this type of
non-trivial high-level analysis becomes possible.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Recording with -a (or with -p) can race with tasks going away:
couldn't open /proc/8440/maps
Causing an early exit() and no recording done.
Do not abort the recording session - instead just skip that task.
Also, only print the warnings under -v.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the --repeat <n> feature to perf stat, which repeats a given
command up to a 100 times, collects the stats and calculates an
average and a stddev.
For example, the following oneliner 'perf stat' command runs hackbench
5 times and prints a tabulated result of all metrics, with averages
and noise levels (in percentage) printed:
aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10
Time: 0.117
Time: 0.108
Time: 0.089
Time: 0.088
Time: 0.100
Performance counter stats for '/home/mingo/hackbench 10' (5 runs):
1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% )
47706 context-switches # 0.038 M/sec ( +- 19.706% )
387 CPU-migrations # 0.000 M/sec ( +- 3.608% )
17793 page-faults # 0.014 M/sec ( +- 0.354% )
3770941606 cycles # 3031.329 M/sec ( +- 4.621% )
1566372416 instructions # 0.415 IPC ( +- 2.703% )
16783421 cache-references # 13.492 M/sec ( +- 5.202% )
7128590 cache-misses # 5.730 M/sec ( +- 7.420% )
0.118924455 seconds time elapsed.
The goal of this feature is to allow the reliance on these accurate
statistics and to know how many times a command has to be repeated
for the noise to go down to an acceptable level.
(The -v option can be used to see a line printed out as each run progresses.)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- use IPC for the instruction normalization output
- CPUs for the CPU utilization factor value.
- print out time elapsed like the other rows
- tidy up the task-clocks/cpu-clocks printout
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's can be very annoying to scroll down perf annotated output
until we find relevant overhead.
Using the -l option, you can now have a small summary sorted per
overhead in the beginning of the output.
Example:
./perf annotate -l -k ../../vmlinux -s __lock_acquire
Sorted summary for file ../../vmlinux
----------------------------------------------
12.04 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
4.61 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740
3.77 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1775
3.56 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
2.93 /home/fweisbec/linux/linux-2.6-tip/arch/x86/include/asm/irqflags.h:15
2.83 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2545
2.30 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2594
2.20 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2388
2.20 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
2.09 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
2.09 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:138
1.88 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2548
1.47 /home/fweisbec/linux/linux-2.6-tip/arch/x86/include/asm/irqflags.h:15
1.36 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2594
1.36 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
1.26 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1654
1.26 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2592
1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740
1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740
[...]
Only overhead over 0.5% are summarized.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244844682-12928-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we have a colored line in perf annotate, ie a middle/high
overhead one, it's sometimes useful to get the matching line
and filename from the source file, especially this path prepares
to another subsequent one which will print a sorted summary of
midle/high overhead lines in the beginning of the output.
Filename:Lines have the same color than the concerned ip lines.
It can be slow because it relies on addr2line. We could also
use objdump with -l but that implies we would have to bufferize
objdump output and parse it to filter the relevant lines since
we want to print a sorted summary in the beginning.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244844682-12928-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Help out arch porters who want to support perf counters by listing some
basic requirements.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244827063-24046-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide for means of extending the perf_counter_attr in a 'natural' way.
We allow growing the structure by appending fields at the end by specifying
the full structure size inside it.
When a new kernel sees a smaller (old) structure, it will 0 pad the tail.
When an old kernel sees a larger (new) structure, it will verify the tail
consists of 0s, otherwise fail.
If we fail due to a size-mismatch, we return -E2BIG and write the kernel's
native attribe size back into the provided structure.
Furthermore, add some attribute verification, so that we'll fail counter
creation when unknown bits are present (PERF_SAMPLE, PERF_FORMAT, or in
the __reserved fields).
(This ABI detail is introduced while keeping the existing syscall ABI.)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Up until now record has worked on the assumption that type=0, config=0
was a suitable configuration - which it is. Lets make this a little more
explicit and more readable via the use of proper symbols.
[ Impact: cleanup ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Otherwise all L1-instruction aliases will be recognized as
L1-data by strcasestr() when calling function parse_aliases.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090612031706.GA22126@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A build error slipped in:
builtin-report.c: In function ‘hist_entry__fprintf’:
builtin-report.c:711: error: format ‘%12d’ expects type ‘int’, but argument 3 has type ‘uint64_t’
Because we got a bit sloppy with those types. uint64_t really sucks,
because there's no printf format for it. So standardize on __u64
instead - for all types that go to or come from the ABI (which is __u64),
or for values that need to be large enough even on 32-bit.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we use variable period sampling, add the period to the sample
data and use that to normalize the samples.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently report and stat catch SIGINT (and others) without altering
their exit state. This means that things like:
while :; do perf stat ./foo ; done
Loops become hard-to-interrupt, because bash never sees perf terminate
due to interruption. Fix this.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create the counter in a disabled state and only enable it after we
mmap() the buffer, this allows us to see the first few samples (and
observe the frequency ramp).
Furthermore, print the period in the verbose report.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The rule is:
- high overhead: red
- mid overhead: green
- low overhead: normal (white/black)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds support for profiling JIT generated code to 'perf
report'. A JIT compiler is required to generate a "/tmp/perf-$PID.map"
symbols map that is parsed when looking and displaying symbols.
Thanks to Peter Zijlstra for his help with this patch!
Example "perf report" output with the Jato JIT:
#
# (40311 samples)
#
# Overhead Command Shared Object Symbol
# ........ ................ ......................... ......
#
97.80% jato /tmp/perf-11915.map [.] Fibonacci.fib(I)I
0.56% jato 00000000b7fa023b 0x000000b7fa023b
0.45% jato /tmp/perf-11915.map [.] Fibonacci.main([Ljava/lang/String;)V
0.38% jato [kernel] [k] get_page_from_freelist
0.06% jato [kernel] [k] kunmap_atomic
0.05% jato ./jato [.] utf8Hash
0.04% jato ./jato [.] executeJava
0.04% jato ./jato [.] defineClass
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: a.p.zijlstra@chello.nl
Cc: acme@redhat.com
LKML-Reference: <Pine.LNX.4.64.0906082111590.12407@melkki.cs.Helsinki.FI>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before:
$ perf report
failed to open file: No such file or directory
After:
$ perf report
failed to open file: perf.data (try 'perf record' first)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If perf is run on a !CONFIG_PERF_COUNTER kernel right now it
bails out with no messages or with confusing messages.
Standardize this case some more and explain the situation.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
