1
Commit Graph

11 Commits

Author SHA1 Message Date
Uwe Kleine-König
44505c0768 ARM: mx5: dynamically register imx-i2c devices
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01 09:32:05 +02:00
Uwe Kleine-König
e16ddb3ad2 ARM: mx5/mx51_babbage: don't use PHYS_OFFSET
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:03 +02:00
Sascha Hauer
e7a895bf64 ARM: mx5/mx51_babbage: fix compiler warnings
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:02 +02:00
Fabio Estevam
3efee47db7 ARM: mx5/mx51_babbage: Add FEC support
Tested it by booting a rootfs via NFS.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:00 +02:00
Amit Kucheria
68d03da2ae [PATCH] mxc: Fix pad names for imx51
The pads capable of being used as GPIOs had their pad-name and mode-name
switched. Also, fix the following:

- Whitespace fixes
- Replace IOMUX_CONFIG_ALTn with 'n'

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:20 +02:00
Dinh Nguyen
f00b771a98 mx5: Register i2c on Freescale MX51 Babbage HW
Add device registration and setup IOMUX pins in the mx51_babbage
board feil.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:18:00 +02:00
Dinh Nguyen
d6b273bfdf mx5: bring usb phy out of reset on freescale mx51 babbage hw
This patch de-asserts the reset line that is connected to the USB
ULPI PHY on USB Host1.

This patch should be included with the original USB host enablement
set of patches of mx51 babbage hw, but was accidentily left out.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-18 10:46:31 +02:00
Dinh Nguyen
2ba5a2c0d8 mx5: enable usb gadget for freescale mx51 babbage board
This patch enables usb gadget for freescale mx51 babbage hw. By default,
the OTG port will be in device mode. To put the OTG port into Host mode,
pass "otg_mode=host" in the exec command.

This patch applies to 2.6.34-rc7.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-11 08:49:54 +02:00
Dinh Nguyen
231637f5f2 mx5: Enable board specific functions for enabling USB host on Babbage
This patch enables USB host functionality for Host1 and OTG port on
Freescale MX51 Babbage HW. This patch contains the board specific
HW initialization of the USB HW.

This patch applies to 2.6.34-rc6.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-03 15:18:13 +02:00
Fabio Estevam
82d52a1948 mx51_babbage: Fix ckih2 parameter in mx51_clocks_init function
This patch is to be applied into Sascha's mxc-master branch.

Fix ckih2 parameter in mx51_clocks_init funtion. CKIH2 pin is left unconnected on Babbage.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-24 10:29:14 +01:00
Amit Kucheria
b996b58303 mxc: Add support for the Babbage board (i.MX5)
Babbage is a reference board from Freescale for their i.MX51 SoC.

Add board definition, Kconfig and Makefiles to enable Freescale i.MX51
processor and Babbage board.

Boot tested on a Babbage2.5 board

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09 18:32:17 +02:00