1
Commit Graph

700 Commits

Author SHA1 Message Date
Krzysztof Helt
8066e51ae7 ALSA: snd_dma_pointer workaround for chipsets with buggy DMA
The chipsets with the isa_dma_bridge_buggy set do not stop DMA during
DMA counter reads. The DMA counter is read in two 8-bit read steps
on x86 platform. Sometimes, such reads happen during higher byte
change so the lower byte is already decremented (rolled over) but
the higher byte is not. It introduces an error that position is
moved 256 bytes ahead of the true position. Thus, the next DMA
position read can return a lower value then the previous read.
If the DMA position is decreased (reversed) the ALSA subsystem is
tricked into the playback underrun error and resets the playback.
It results in a "pop" during a playback.

Work around the issue by reading the counter twice and choosing a higher
value.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11 18:03:13 +02:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Takashi Iwai
d3a7dcfeeb ALSA: pcm - Simplify snd_pcm_drain() implementation
Simplify snd_pcm_drain() implementation and avoid unneeded array-
allocation for waitqueues.  Instead, one waitqueue is used for the
first draining stream, and wait until all streams finished.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21 15:13:09 +02:00
Takashi Iwai
b34c866394 Merge branch 'topic/tlv-minmax' into for-linus
* topic/tlv-minmax:
  ALSA: usb-audio - Correct bogus volume dB information
  ALSA: usb-audio - Use the new TLV_DB_MINMAX type
  ALSA: Add new TLV types for dBwith min/max
2009-09-10 15:33:06 +02:00
Takashi Iwai
9d416811f8 Merge branch 'topic/snd-printk' into for-linus
* topic/snd-printk:
  ALSA: Fixed a typo of printk()
  ALSA: Add debug module option
  ALSA: core - strip too long file names in snd_print*()
2009-09-10 15:33:03 +02:00
Takashi Iwai
df9200dd04 Merge branch 'topic/pcm-estrpipe-in-pm' into for-linus
* topic/pcm-estrpipe-in-pm:
  ALSA: pcm - Tell user that stream to be rewound is suspended
2009-09-10 15:33:02 +02:00
Takashi Iwai
2c0d19a78d Merge branch 'topic/pcm-drain-nonblock' into for-linus
* topic/pcm-drain-nonblock:
  ALSA: pcm - Increase protocol version
  ALSA: pcm - Fix drain behavior in non-blocking mode
2009-09-10 15:33:00 +02:00
Takashi Iwai
fa28519002 Merge branch 'topic/oss' into for-linus
* topic/oss:
  ALSA: allocation may fail in	snd_pcm_oss_change_params()
  sound: vwsnd: Fix setting of cfgval and ctlval in li_setup_dma()
  sound: fix OSS MIDI output data loss
2009-09-10 15:32:58 +02:00
Takashi Iwai
9cd9f42767 Merge branch 'topic/misc' into for-linus
* topic/misc:
  ALSA: Remove unneeded ifdef from sound/core.h
  ALSA: Remove struct snd_monitor_file from public sound/core.h
  ALSA: Release v1.0.21
2009-09-10 15:32:57 +02:00
Takashi Iwai
0f23c5cc50 Merge branch 'topic/midi' into for-linus
* topic/midi:
  sound: rawmidi: disable active-sensing-on-close by default
  sound: seq_oss_midi: remove magic numbers
  sound: seq_midi: do not send MIDI reset when closing
  seq-midi: always log message on output overrun
2009-09-10 15:32:56 +02:00
Takashi Iwai
6a0f402146 Merge branch 'topic/dummy' into for-linus
* topic/dummy:
  ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
  ALSA: dummy - Add debug proc file
  ALSA: Add const prefix to proc helper functions
  ALSA: Re-export snd_pcm_format_name() function
  ALSA: dummy - Fake buffer allocations
  ALSA: dummy - Fix the timer calculation in systimer mode
  ALSA: dummy - Add more description
  ALSA: dummy - Better jiffies handling
  ALSA: dummy - Support high-res timer mode
2009-09-10 15:32:51 +02:00
Takashi Iwai
f9892a52e2 Merge branch 'topic/dma-sgbuf' into for-linus
* topic/dma-sgbuf:
  ALSA: Fix SG-buffer DMA with non-coherent architectures
2009-09-10 15:32:50 +02:00
Takashi Iwai
f604529d0c Merge branch 'topic/ctl-add-remove-fixes' into for-linus
* topic/ctl-add-remove-fixes:
  sound: snd_ctl_remove_user_ctl: prevent removal of kernel controls
  sound: snd_ctl_remove_unlocked_id: simplify user control counting
  sound: snd_ctl_remove_unlocked_id: simplify error paths
  sound: snd_ctl_elem_add: fix value count check
2009-09-10 15:32:47 +02:00
Takashi Iwai
d0064a1b22 Merge branch 'topic/cleanup' into for-linus
* topic/cleanup:
  ALSA: info - Use krealloc()
2009-09-10 15:32:43 +02:00
Takashi Iwai
4f7454a997 ALSA: Add const prefix to proc helper functions
Add appropriate const prefix to char * arguments in proc helper functions.
Also fixed the caller side to be proper const pointers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-08 14:45:06 +02:00
Takashi Iwai
6e5265ec34 ALSA: Re-export snd_pcm_format_name() function
Re-export snd_pcm_format_name() function to be used outside the PCM core.
As a first example, usbaudio is changed to use it now again.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-08 14:26:51 +02:00
Takashi Iwai
82a783f4bc ALSA: Remove struct snd_monitor_file from public sound/core.h
The struct snd_monitor_file is used locally only in sound/core/init.c,
thus it should be moved there from the public sound/core.h.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-07 15:50:18 +02:00
Roel Kluin
cbbb05703d ALSA: allocation may fail in snd_pcm_oss_change_params()
Allocation may fail, show if it did.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
[Additional fix for invalid runtime->oss.prepare flag set by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31 16:33:23 +02:00
Takashi Iwai
36ce99c1dc ALSA: Add debug module option
Add debug module option to snd core.
This controls the debug print level.  When CONFIG_SND_DEBUG_VERBOSE
is set, you can suppress the debug messages by giving or changing this
parameter to a lower value.  debug=0 means no debug messsages.
As default, it's set to the verbose level 2.

Since this option can be changed dynamically via sysfs file, you can
suppress the verbose debug messages on the fly, which wasn't possible
before.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27 17:42:08 +02:00
Takashi Iwai
1b0053a0f0 ALSA: core - strip too long file names in snd_print*()
When modules are built with M= option, they pass long file paths to
__FILE__.  This results in ugly outputs of snd_print*() when
CONFIG_SND_VERBOSE_PRINTK is set.

This patch adds a check of the path and strips the leading path dirs
if the file name is an absolute path to improve the readability of logs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27 12:39:35 +02:00
Linus Torvalds
a206e9417f Merge branch 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: pcm_lib: fix unsorted list constraint handling
  sound: vx222: fix input level control range check
  ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready()
2009-08-25 09:47:06 -07:00
Clemens Ladisch
b1ddaf681e sound: pcm_lib: fix unsorted list constraint handling
snd_interval_list() expected a sorted list but did not document this, so
there are drivers that give it an unsorted list.  To fix this, change
the algorithm to work with any list.

This fixes the "Slave PCM not usable" error with USB devices that have
multiple alternate settings with sample rates in decreasing order, such
as the Philips Askey VC010 WebCam.

http://bugzilla.kernel.org/show_bug.cgi?id=14028

Reported-and-tested-by: Andrzej <adkadk@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25 08:52:34 +02:00
Takashi Iwai
4cdc115fd3 ALSA: pcm - Fix drain behavior in non-blocking mode
The current PCM core has the following problems regarding PCM draining
in non-blocking mode:

- the current f_flags isn't checked in snd_pcm_drain(), thus changing
  the mode dynamically via snd_pcm_nonblock() after open doesn't work.
- calling drain in non-blocking mode just return -EAGAIN error, but
  doesn't provide any way to sync with draining.

This patch fixes these issues.
- check file->f_flags in snd_pcm_drain() properly
- when O_NONBLOCK is set, PCM core sets the stream(s) to DRAIN state
  but quits ioctl immediately without waiting the whole drain; the
  caller can sync the drain manually via poll()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-20 16:40:16 +02:00
Clemens Ladisch
18dd0aa5af sound: snd_ctl_remove_user_ctl: prevent removal of kernel controls
Ensure that userspace can remove only user controls.  Controls created
by kernel drivers must not be removed because they might be referenced
in calls to snd_ctl_notify().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-17 12:48:21 +02:00
Clemens Ladisch
f217ac59b6 sound: snd_ctl_remove_unlocked_id: simplify user control counting
Move the decrementing of the user controls counter from
snd_ctl_elem_remove to snd_ctl_remove_unlocked_id; this saves the
separate locking of the controls semaphore, and therefore removes
a harmless race.

Since the purpose of the function is to operate on user controls (the
control being unlocked is just a prerequisite), rename it to
snd_ctl_remove_user_ctl.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-17 12:48:15 +02:00
Clemens Ladisch
317b80817f sound: snd_ctl_remove_unlocked_id: simplify error paths
Use a common exit path to release the mutex and to return a possible
error.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-17 12:48:06 +02:00
Clemens Ladisch
2a031aedf7 sound: snd_ctl_elem_add: fix value count check
Make sure that no user element that has no values can be added.

The check for count>1024 is not needed because the count is checked
later for the individual control types.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-17 12:48:00 +02:00
Lubomir Rintel
51840409b6 ALSA: pcm - Tell user that stream to be rewound is suspended
Return STRPIPE instead of EBADF when userspace attempts to rewind
of forward a stream that was suspended in meanwhile, so that it
can be recovered by snd_pcm_recover().

This was causing Pulseaudio to unload the ALSA sink module under a race
condition when it attempted to rewind the stream right after resume from
suspend, before writing to the stream which would cause it to revive the
stream otherwise. Tested to work with Pulseaudio patched to attempt to
snd_pcm_recover() upon receiving an error from snd_pcm_rewind().

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03 08:57:00 +02:00
Takashi Iwai
b88158846f Merge branch 'fix/pcm-hwptr' into for-linus
* fix/pcm-hwptr:
  ALSA: pcm - Fix hwptr buffer-size overlap bug
  ALSA: pcm - Fix warnings in debug loggings
  ALSA: pcm - Add logging of hwptr updates and interrupt updates
  ALSA: pcm - Fix regressions with VMware
2009-07-26 11:07:07 +02:00
Takashi Iwai
947ca210f1 ALSA: pcm - Fix hwptr buffer-size overlap bug
The fix 79452f0a28 introduced another
bug due to the missing offset for the overlapped hwptr.
When the hwptr goes back to zero, the delta value has to be corrected
with the buffer size.  Otherwise this causes looping sounds.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-23 16:21:08 +02:00
Takashi Iwai
8935064043 ALSA: pcm - Fix warnings in debug loggings
Add proper cast.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-23 14:28:37 +02:00
Takashi Iwai
cedb8118e8 ALSA: pcm - Add logging of hwptr updates and interrupt updates
Added the logging functionality to xrun_debug to record the hwptr
updates via snd_pcm_update_hw_ptr() and snd_pcm_update_hwptr_interrupt(),
corresponding to 16 and 8, respectively.

For example,
	# echo 9 > /proc/asound/card0/pcm0p/xrun_debug
will record the position and other parameters at each period interrupt
together with the normal XRUN debugging.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-23 11:09:03 +02:00
Takashi Iwai
79452f0a28 ALSA: pcm - Fix regressions with VMware
VMware tends to report PCM positions and period updates at utterly
wrong timing.  This screws up the recent PCM core code that tries
to correct the position based on the irq timing.

Now, when a backward irq position is detected, skip the update
instead of rebasing.  (This is almost the old behavior before
2.6.30.)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-22 12:55:56 +02:00
Jaswinder Singh Rajput
f96e080821 ALSA: OSS sequencer should be initialized after snd_seq_system_client_init
When build SND_SEQUENCER in kernel then OSS sequencer(alsa_seq_oss_init)
is initialized before System (snd_seq_system_client_init) which leads to
memory leak :

unreferenced object 0xf6b0e680 (size 256):
  comm "swapper", pid 1, jiffies 4294670753
  backtrace:
    [<c108ac5c>] create_object+0x135/0x204
    [<c108adfe>] kmemleak_alloc+0x26/0x4c
    [<c1087de2>] kmem_cache_alloc+0x72/0xff
    [<c126d2ac>] seq_create_client1+0x22/0x160
    [<c126e3b6>] snd_seq_create_kernel_client+0x72/0xef
    [<c1485a05>] snd_seq_oss_create_client+0x86/0x142
    [<c1485920>] alsa_seq_oss_init+0xf6/0x155
    [<c1001059>] do_one_initcall+0x4f/0x111
    [<c14655be>] kernel_init+0x115/0x166
    [<c10032af>] kernel_thread_helper+0x7/0x10
    [<ffffffff>] 0xffffffff
unreferenced object 0xf688a580 (size 64):
  comm "swapper", pid 1, jiffies 4294670753
  backtrace:
    [<c108ac5c>] create_object+0x135/0x204
    [<c108adfe>] kmemleak_alloc+0x26/0x4c
    [<c1087de2>] kmem_cache_alloc+0x72/0xff
    [<c126f964>] snd_seq_pool_new+0x1c/0xb8
    [<c126d311>] seq_create_client1+0x87/0x160
    [<c126e3b6>] snd_seq_create_kernel_client+0x72/0xef
    [<c1485a05>] snd_seq_oss_create_client+0x86/0x142
    [<c1485920>] alsa_seq_oss_init+0xf6/0x155
    [<c1001059>] do_one_initcall+0x4f/0x111
    [<c14655be>] kernel_init+0x115/0x166
    [<c10032af>] kernel_thread_helper+0x7/0x10
    [<ffffffff>] 0xffffffff
unreferenced object 0xf6b0e480 (size 256):
  comm "swapper", pid 1, jiffies 4294670754
  backtrace:
    [<c108ac5c>] create_object+0x135/0x204
    [<c108adfe>] kmemleak_alloc+0x26/0x4c
    [<c1087de2>] kmem_cache_alloc+0x72/0xff
    [<c12725a0>] snd_seq_create_port+0x51/0x21c
    [<c126de50>] snd_seq_ioctl_create_port+0x57/0x13c
    [<c126d07a>] snd_seq_do_ioctl+0x4a/0x69
    [<c126d0de>] snd_seq_kernel_client_ctl+0x33/0x49
    [<c1485a74>] snd_seq_oss_create_client+0xf5/0x142
    [<c1485920>] alsa_seq_oss_init+0xf6/0x155
    [<c1001059>] do_one_initcall+0x4f/0x111
    [<c14655be>] kernel_init+0x115/0x166
    [<c10032af>] kernel_thread_helper+0x7/0x10
    [<ffffffff>] 0xffffffff

The correct order should be :

System (snd_seq_system_client_init) should be initialized before
OSS sequencer(alsa_seq_oss_init) which is equivalent to :

1. insmod sound/core/seq/snd-seq-device.ko
2. insmod sound/core/seq/snd-seq.ko
3. insmod sound/core/seq/snd-seq-midi-event.ko
4. insmod sound/core/seq/oss/snd-seq-oss.ko

Including sound/core/seq/oss/Makefile after other seq modules
fixes the ordering and memory leak.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-19 19:10:01 +02:00
Clemens Ladisch
2d4b842014 sound: rawmidi: disable active-sensing-on-close by default
Sending an Active Sensing message when closing a port can interfere with
the following data if the port is reopened and a note-on is sent before
the device's timeout has elapsed.  Therefore, it is better to disable
this setting by default.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:57:20 +02:00
Clemens Ladisch
08d033405a sound: seq_oss_midi: remove magic numbers
Instead of using magic numbers for the controlles sent when resetting
a port, use the symbols from asoundef.h.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:57:08 +02:00
Clemens Ladisch
b86c87288c sound: seq_midi: do not send MIDI reset when closing
Sending a MIDI reset message when closing a port is wrong because we
only want to shut the device up, not to reset all settings.
Furthermore, many devices ignore this message.

Fortunately, the RawMIDI layer already shuts the device up, so we can
ignore this matter here.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:58 +02:00
Clemens Ladisch
f907ed94f9 seq-midi: always log message on output overrun
It turns out that the main cause of output buffer overruns is not slow
drivers but applications that generate too many messages.  Therefore, it
makes more sense to make that error message always visible, and to
rate-limit it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:06 +02:00
Takashi Iwai
cc6a8acdee ALSA: Fix SG-buffer DMA with non-coherent architectures
Using SG-buffers with dma_alloc_coherent() is often very inefficient
on non-coherent architectures because a tracking record could be
allocated in addition for each dma_alloc_coherent() call.
Instead, simply disable SG-buffers but just allocate normal continuous
buffers on non-supported (currently all but x86) architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-08 14:20:20 +02:00
Takashi Iwai
9983aa62c3 ALSA: info - Use krealloc()
Use krealloc() to resize the buffer in sound/core/info.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-06 14:31:59 +02:00
Takashi Iwai
3f67f6693c Merge branch 'topic/seq-midi-fix' into for-linus
* topic/seq-midi-fix:
  sound: seq_midi_event: fix decoding of (N)RPN events
2009-06-22 17:03:56 +02:00
Takashi Iwai
12bc738596 Merge branch 'topic/pcm-jiffies-check' into for-linus
* topic/pcm-jiffies-check:
  sound: fix check for return value in snd_pcm_hw_refine
2009-06-22 17:03:54 +02:00
Clemens Ladisch
6423f9ea80 sound: seq_midi_event: fix decoding of (N)RPN events
When decoding (N)RPN sequencer events into raw MIDI commands, the
extra_decode_xrpn() function had accidentally swapped the MSB and LSB
controller values of both the parameter number and the data value.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22 11:11:49 +02:00
Mariusz Kozlowski
8bd9bca3c1 sound: fix check for return value in snd_pcm_hw_refine
'params' is a pointer and looking at the code this probably should be a check
for ioctl return value.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22 07:54:21 +02:00
Takashi Iwai
085f306541 ALSA: Add new TLV types for dBwith min/max
Add new types for TLV dB scale specified with min/max values instead
of min/step since the resolution can't match always with the one
a device provides.  For example, usb audio devices give 1/256 dB
resolution while ALSA TLV is based on 1/100 dB resolution.
The new min/max types have less problems because the possible
rounding error happens only at min/max.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-17 10:56:53 +02:00
Takashi Iwai
be914cf910 Merge branch 'topic/misc' into for-linus
* topic/misc:
  ALSA: use card device as parent for jack input-devices
2009-06-12 20:03:13 +02:00
Kay Sievers
1f3fff7bda ALSA: use card device as parent for jack input-devices
This moves the jack devices from the PCI device into the ALSA card device, which
makes it easier for userspace to find all devices belonging to a specific card
while granting access to logged-in users.

Jack input devices from sound cards can now simply be matched with udev by doing:
  SUBSYSTEM="input", SUBSYSTEMS="sound", ...

 ls -l /sys/devices/pci0000:00/0000:00:1b.0/sound/card0
 controlC0
 device -> ../../../0000:00:1b.0
 id
 input10
 input11
 input8
 input9
 number
 pcmC0D0c
 pcmC0D0p
 pcmC0D1p
 power
 subsystem -> ../../../../../class/sound
 uevent

Cc: Lennart Poettering <lennart@0pointer.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-10 19:50:33 +02:00
Takashi Iwai
4ef279205a Merge branch 'topic/seq-kconfig-cleanup' into for-linus
* topic/seq-kconfig-cleanup:
  ALSA: clean up the logic for building sequencer modules
2009-06-10 07:26:48 +02:00
Takashi Iwai
3b88bc5229 Merge branch 'topic/pcm-jiffies-check' into for-linus
* topic/pcm-jiffies-check:
  ALSA: pcm - A helper function to compose PCM stream name for debug prints
  ALSA: pcm - Fix update of runtime->hw_ptr_interrupt
  ALSA: pcm - Fix a typo in hw_ptr update check
  ALSA: PCM midlevel: lower jiffies check margin using runtime->delay value
  ALSA: PCM midlevel: Do not update hw_ptr_jiffies when hw_ptr is not changed
  ALSA: PCM midlevel: introduce mask for xrun_debug() macro
  ALSA: PCM midlevel: improve fifo_size handling
2009-06-10 07:26:41 +02:00
Takashi Iwai
eabaf0634a Merge branch 'topic/pcm-delay' into for-linus
* topic/pcm-delay:
  ALSA: usbaudio - Add delay account
  ALSA: Add extra delay count in PCM
2009-06-10 07:26:40 +02:00
Takashi Iwai
19b1a15a3d Merge branch 'topic/div64-cleanup' into for-linus
* topic/div64-cleanup:
  ALSA: Clean up 64bit division functions
2009-06-10 07:26:28 +02:00
Takashi Iwai
c00701101b ALSA: pcm - A helper function to compose PCM stream name for debug prints
Use a common helper function for the PCM stream name displayed in
XRUN and buffer-pointer debug prints.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08 16:01:47 +02:00
Takashi Iwai
ab1863fc9b ALSA: pcm - Fix update of runtime->hw_ptr_interrupt
The commit 13f040f9e5 made another
regression, the missing update of runtime->hw_ptr_interrupt.
Since this field is only checked in snd_pcmupdate__hw_ptr_interrupt(),
not in snd_pcm_update_hw_ptr(), it must be updated before the hw_ptr
change check.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-07 12:19:33 +02:00
Jaroslav Kysela
d86bf92313 ALSA: pcm - Fix a typo in hw_ptr update check
Fix a typo in the commit 13f040f9e5
  ALSA: PCM midlevel: Do not update hw_ptr_jiffies when hw_ptr is not changed
which causes obvious problems with PA.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-06 18:32:06 +02:00
Takashi Iwai
3f7440a6b7 ALSA: Clean up 64bit division functions
Replace the house-made div64_32() with the standard div_u64*() functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05 17:45:17 +02:00
Jaroslav Kysela
5fdc18d938 ALSA: Core - clean up snd_card_set_id* calls and remove possible id collision
Move locking outside snd_card_set_id_internal() function and rename it
to snd_card_set_id_no_lock() for better function description.

User defined id is just copied to card structure at allocation time.
The real unique id procedure is called in snd_card_register() to
ensure real atomicity.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-04 01:22:07 +02:00
Mark Brown
872c78202c ALSA: Fix double locking of card list in snd_card_register()
The introduction of snd_card_set_id() added a lock on the card list
to the old choose_default_id() function when using it to implement
the new API call. This lock is needed to allow us to walk the list
and check to see if our new name is a duplicate. Unfortunately this
causes a lockup when called from snd_card_register() (in cases
where no ID is supplied for the card) since the card list is already
locked there.

Fix this fairly hideously by factoring out the implementation and
using a flag to indicate if the lock should be held. A better fix
would probably be to refactor snd_card_register() to move the
_set_id() outside the locking region but I can't immediately see
anything I can convince myself is safe.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-03 23:33:28 +02:00
Jaroslav Kysela
10a8ebbb08 ALSA: Core - add snd_card_set_id() function
Introduce snd_card_set_id() function to allow lowlevel drivers to set
default identification name for card slot. The function checks also
for identification name collisions and tries to create unique name.

Also, the snd_card_create() function is simplified, because this new
function is used. As bonus, proper name collision checks are evaluated
at the card create time.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02 12:47:46 +02:00
Michal Marek
0528c7494e ALSA: clean up the logic for building sequencer modules
Instead of mangling the CONFIG_* variables in the makefiles over and
over, set a few helper variables in Kconfig.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:49:42 +02:00
Jaroslav Kysela
a4444da31e ALSA: PCM midlevel: lower jiffies check margin using runtime->delay value
When hardware has large FIFO, it is necessary to lower jiffies margin
by count of queued samples.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:47:40 +02:00
Jaroslav Kysela
13f040f9e5 ALSA: PCM midlevel: Do not update hw_ptr_jiffies when hw_ptr is not changed
Some hardware might have bigger FIFOs and DMA pointer value will be updated
in large chunks. Do not update hw_ptr_jiffies and position timestamp when
hw_ptr value was not changed.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:47:38 +02:00
Jaroslav Kysela
c62a01ad6e ALSA: PCM midlevel: introduce mask for xrun_debug() macro
For debugging purposes, it is better to separate actions.

Bit-values:

	1: show bad PCM ring buffer pointer
	2: show also stack (to debug kernel latency issues)
	4: check pointer against system jiffies

Example:

	5: show bad PCM ring buffer pointer and do jiffies check

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:47:36 +02:00
Jaroslav Kysela
8bea869c5e ALSA: PCM midlevel: improve fifo_size handling
Move the fifo_size assignment to hw->ioctl callback to allow lowlevel
drivers overwrite the default behaviour.

fifo_size is in frames not bytes as specified in asound.h and alsa-lib's
documentation, but most hardware have fixed byte based FIFOs. Introduce
internal SNDRV_PCM_INFO_FIFO_IN_FRAMES.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:47:33 +02:00
Takashi Iwai
e93721a702 Merge branch 'fix/pcm-jiffies-check' into topic/pcm-jiffies-check 2009-05-29 11:46:10 +02:00
Takashi Iwai
c87d973200 ALSA: Enable PCM hw_ptr_jiffies check only in xrun_debug mode
The PCM hw_ptr jiffies check results sometimes in problems when a
hardware doesn't give smooth hw_ptr updates.  So far, au88x0 and some
other drivers appear not working due to this strict check.
However, this check is a nice debug tool, and the capability should be
still kept.

Hence, we disable this check now as default unless the user enables it
by setting the xrun_debug mode to the specific stream via a proc file.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-27 11:04:30 +02:00
Takashi Iwai
6af3fb72d2 ALSA: Fix invalid jiffies check after pause
The hw_ptr_jiffies has to be reset properly to avoid the invalid
check of jiffies delta in snd_pcm_update_hw_ptr*() functions.
Especailly this patch fixes the bogus jiffies check after the puase
and resume.

This patch is a modified version of the original patch by Jaroslav.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-27 11:04:18 +02:00
Takashi Iwai
4bbe1ddf89 ALSA: Add extra delay count in PCM
Added runtime->delay field to adjust the delayed samples for snd_pcm_delay().
Typically a hardware FIFO length is stored in this field, so that the
extra delay between hwptr and applptr can be computed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-05 14:47:21 +02:00
Takashi Iwai
3e5b50165f ALSA: pcm core - Avoid jiffies check for devices with BATCH flag
The hardware devices with SNDRV_PCM_INFO_BATCH flag can't give the
precise current position.  And such hardwares have often big FIFO
in addition to the ring buffer, and it screws up the jiffies check
in pcm_lib.c.

This patch adds a simple check of info flag so that the driver skips
the jiffies check in snd_pcm_period_elapsed() when BATCH flag is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-28 15:10:16 +02:00
Takashi Iwai
f4723b224d Merge branch 'topic/memdup_user' into for-linus
* topic/memdup_user:
  ALSA: sound/pci: use memdup_user()
  ALSA: sound/usb: use memdup_user()
  ALSA: sound/isa: use memdup_user()
  ALSA: sound/core: use memdup_user()
2009-04-15 11:24:27 +02:00
Takashi Iwai
2e8e59f437 Merge branch 'topic/hda' into for-linus
* topic/hda:
  ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883
  ALSA: hda - Avoid call of snd_jack_report at release
  ALSA: add private_data to struct snd_jack
2009-04-15 11:24:09 +02:00
Takashi Iwai
9d59065cd6 ALSA: add private_data to struct snd_jack
Added private_data and private_free fields to struct snd_jack so that
the caller can assign the data.  It'll be helpful for avoiding the
double-free of the jack instance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14 16:15:09 +02:00
Li Zefan
ef44a1ec6e ALSA: sound/core: use memdup_user()
Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14 12:39:12 +02:00
Jaroslav Kysela
bbf6ad1399 [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies
Some drivers like Intel8x0 or Intel HDA are broken for some hardware variants.
This patch adds more strict buffer position checks based on jiffies when
internal hw_ptr is updated. Enable xrun_debug to see mangling of wrong
positions.

As a side effect, the hw_ptr interrupt update routine might do slightly better
job when many interrupts are lost.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-04-10 12:28:58 +02:00
Deepika Makhija
d2e8e52976 ALSA: oss - volume control for CSWITCH and CROUTE
Added an else part to check
SNDRV_MIXER_OSS_PRESENT_CVOLUME for MIC (slot 7)
in commit 36c7b833e5

Similarly, checks and volume control is required for
SNDRV_MIXER_OSS_PRESENT_CSWITCH and SNDRV_MIXER_OSS_PRESENT_CROUTE
as well.

Signed-off-by: Deepika Makhija <deepika.makhija@einfochips.com>
Signed-off-by: Viral Mehta <viral.mehta@einfochips.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-07 04:23:46 +02:00
Alexey Dobriyan
99b7623380 proc 2/2: remove struct proc_dir_entry::owner
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.

We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.

But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.

->read_proc/->write_proc were just fixed to not require ->owner for
protection.

rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.

Removing ->owner will also make PDE smaller.

So, let's nuke it.

Kudos to Jeff Layton for reminding about this, let's say, oversight.

http://bugzilla.kernel.org/show_bug.cgi?id=12454

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-31 01:14:44 +04:00
Linus Torvalds
8e9d208972 Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  Rationalize fasync return values
  Move FASYNC bit handling to f_op->fasync()
  Use f_lock to protect f_flags
  Rename struct file->f_ep_lock
2009-03-26 16:14:02 -07:00
Takashi Iwai
e0d2054fd3 Merge branch 'topic/misc' into for-linus 2009-03-24 00:35:50 +01:00
Takashi Iwai
d807500a24 Merge branch 'topic/pcm-cleanup' into for-linus 2009-03-24 00:35:49 +01:00
Takashi Iwai
ec6659c389 Merge branch 'topic/vmaster-update' into for-linus 2009-03-24 00:35:47 +01:00
Takashi Iwai
c944a93df0 Merge branch 'topic/rawmidi-fix' into for-linus 2009-03-24 00:35:46 +01:00
Takashi Iwai
65b3864b85 Merge branch 'topic/ctl-list-cleanup' into for-linus 2009-03-24 00:35:45 +01:00
Takashi Iwai
bafdb7278c Merge branch 'topic/quirk-cleanup' into for-linus 2009-03-24 00:35:44 +01:00
Takashi Iwai
5b56eec774 Merge branch 'topic/jack' into for-linus 2009-03-24 00:35:43 +01:00
Takashi Iwai
c2f43981e5 Merge branch 'topic/hwdep-cleanup' into for-linus 2009-03-24 00:35:41 +01:00
Takashi Iwai
dec14f8c0e Merge branch 'topic/snd_card_new-err' into for-linus 2009-03-24 00:35:35 +01:00
Takashi Iwai
8b22d943c3 ALSA: pcm - Safer boundary checks
Make the boundary checks a bit safer.
These caese are rare or theoretically won't happen, but nothing
bad to keep the checks safer...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-20 16:26:15 +01:00
Takashi Iwai
ded652f702 ALSA: pcm - Fix delta calculation at boundary overlap
When the hw_ptr_interrupt reaches the boundary, it must check whether
the hw_base was already lapped and corret the delta value appropriately.

Also, rebasing the hw_ptr needs a correction because buffer_size isn't
always aligned to period_size.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19 10:08:49 +01:00
Takashi Iwai
5f513e1197 ALSA: pcm - Reset invalid position even without debug option
Always reset the invalind hw_ptr position returned by the pointer
callback.  The behavior should be consitent independently from the
debug option.

Also, add the printk_ratelimit() check to avoid flooding debug
prints.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19 10:01:47 +01:00
Takashi Iwai
98204646f2 ALSA: pcm - avoid unnecessary inline
Remove unnecessary explicit inlininig of internal functions.
Let compiler optimize.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19 09:59:21 +01:00
Takashi Iwai
cad377acf3 ALSA: pcm - Fix a typo in error messages
Fix a typo in error messages; forgotten after a copy&paste error.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19 09:57:45 +01:00
Takashi Iwai
6af845e4eb ALSA: Fix vunmap and free order in snd_free_sgbuf_pages()
In snd_free_sgbuf_pags(), vunmap() is called after releasing the SG
pages, and it causes errors on Xen as Xen manages the pages
differently.  Although no significant errors have been reported on
the actual hardware, this order should be fixed other way round,
first vunmap() then free pages.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18 08:04:01 +01:00
Jiri Slaby
91054598f7 ALSA: pcm_oss, fix locking typo
s/mutex_lock/mutex_unlock/ on 2 fail paths in snd_pcm_oss_proc_write.
Probably a typo, lock should be unlocked when leaving the function.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18 08:03:33 +01:00
Viral Mehta
36c7b833e5 ALSA: oss-mixer - Fixes recording gain control
At the time of initialization, SNDRV_MIXER_OSS_PRESENT_PVOLUME bit is not
set for MIC (slot 7).
So, the same should not be checked when an application tries to do gain
control for audio recording devices.

Just check slot->present for SNDRV_MIXER_OSS_PRESENT_CVOLUME independently.
Verified with a simple application which opens /dev/dsp for recording and
/dev/mixer for volume control.

Have tested two usb audio mic devices.

Signed-off-by: Viral Mehta <viral.mehta@einfochips.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18 07:52:28 +01:00
Jonathan Corbet
60aa49243d Rationalize fasync return values
Most fasync implementations do something like:

     return fasync_helper(...);

But fasync_helper() will return a positive value at times - a feature used
in at least one place.  Thus, a number of other drivers do:

     err = fasync_helper(...);
     if (err < 0)
             return err;
     return 0;

In the interests of consistency and more concise code, it makes sense to
map positive return values onto zero where ->fasync() is called.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16 08:34:35 -06:00
Jonathan Corbet
db1dd4d376 Use f_lock to protect f_flags
Traditionally, changes to struct file->f_flags have been done under BKL
protection, or with no protection at all.  This patch causes all f_flags
changes after file open/creation time to be done under protection of
f_lock.  This allows the removal of some BKL usage and fixes a number of
longstanding (if microscopic) races.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16 08:32:27 -06:00
Takashi Iwai
9a1b64caac ALSA: rawmidi - Refactor rawmidi open/close codes
Refactor rawmidi open/close code messes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 15:17:23 +01:00
Takashi Iwai
f9d202833d ALSA: rawmidi - Fix possible race in open
The module refcount should be handled in the register_mutex to avoid
possible races with module unloading.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 15:17:21 +01:00
Takashi Iwai
118dd6bfe7 ALSA: Clean up snd_monitor_file management
Use the standard linked list for snd_monitor_file management.
Also, move the list deletion of shutdown_list element into
snd_disconnect_release() (for simplification).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 15:16:11 +01:00
Takashi Iwai
79c7cdd544 ALSA: Add kernel-doc comments to vmaster stuff
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 15:10:01 +01:00
Takashi Iwai
f5b1db6342 ALSA: add snd_ctl_add_slave_uncached()
Added snd_ctl_add_slave_uncached() function to add a slave element
with volatile controls.  The values of normal slave elements are
supposed to be cachable, i.e. they are changed only via the put
callbacks.  OTOH, when a slave element is volatile and its values may
be changed by other reason (e.g. hardware status change), the values
will get inconsistent.

The new function allows the slave elements with volatile changes.
When the slave is tied with this call, the native get callback is
issued at each time so that the values are always updated.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 14:56:19 +01:00
Takashi Iwai
85122ea40c ALSA: Remove unneeded snd_pcm_substream.timer_lock
The timer callbacks are called in the protected status by the lock
of the timer instance, so there is no need for an extra lock in the
PCM substream.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 14:02:00 +01:00
Takashi Iwai
ed3da3d9a0 ALSA: Rewrite hw_ptr updaters
Clean up and improve snd_pcm_update_hw_ptr*() functions.

snd_pcm_update_hw_ptr() tries to detect the unexpected hwptr jumps
more strictly to avoid the position mess-up, which often results in
the bad quality I/O with pulseaudio.

The hw-ptr skip error messages are printed when xrun proc is set to
non-zero.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-09 12:56:49 +01:00
Steve Chen
5370d96f85 ALSA: fix excessive background noise introduced by OSS emulation rate shrink
Incorrect variable was used to get the next sample which caused S2
to be stuck with the same value resulting in loud background noise.

Signed-off-by: Steve Chen <schen at mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23 07:49:04 +01:00
Takashi Iwai
2678f60d2b ALSA: jack - Use card->shortname for input name
Currently the jack layer refers to card->longname as a part of
its input device name string.  However, longname is often really long
and way too ugly as an identifier, such as,
"HDA Intel at 0xf8400000 irq 21".

This patch changes the code to use card->shortname instead.
The shortname string contains usually the h/w vendor and product
names but without messy I/O port or IRQ numbers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-18 16:46:27 +01:00
Takashi Iwai
d9f8e9c341 Merge branch 'topic/quirk-cleanup' into topic/misc 2009-02-09 17:20:13 +01:00
Takashi Iwai
8bd4bb7a35 ALSA: Add subdevice_mask field to quirk entries
Introduced a new field, subdevice_mask, which specifies the bitmask
to match with the given subdevice ID.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-09 17:19:11 +01:00
Takashi Iwai
006de26735 ALSA: Add missing KERN_* prefix to printk in sound/core
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 16:00:49 +01:00
Tim Blechmann
e616165309 ALSA: snd_pcm_new api cleanup
Impact: cleanup

snd_pcm_new takes a char *id argument, although it is not modifying
the string. it can therefore be declared as const char *id.

Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 15:03:27 +01:00
Takashi Iwai
345d0b1964 ALSA: hwdep - Make open callback optional
Don't require the open callback as mandatory.
Now all hwdeps ops can be optional.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 09:10:20 +01:00
Roel Kluin
7924f0cadc ALSA: pcm_oss: AFMT_S24_LE is set twice in return value
AFMT_S24_LE is set twice in return value

vi sound/core/oss/pcm_oss.c +640
#define AFMT_S24_LE      0x00008000
#define AFMT_S24_BE      0x00010000

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-04 18:18:03 +01:00
Takashi Iwai
53fb1e6359 ALSA: Introduce snd_card_create()
Introduced snd_card_create() function as a replacement of snd_card_new().
The new function returns a negative error code so that the probe callback
can return the proper error code, while snd_card_new() can give only NULL
check.

The old snd_card_new() is still provided as an inline function but with
__deprecated attribute.  It'll be removed soon later.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12 14:56:41 +01:00
Jani Nikula
d506fc322e ALSA: Add support for video out to the jack reporting API
Add support for reporting new jack types SND_JACK_VIDEOOUT and
SND_JACK_AVOUT (a combination of LINEOUT and VIDEOOUT) to the jack
reporting API.

Also add the corresponding SW_VIDEOOUT_INSERT switch to the input system
header.

Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-07 10:55:18 +00:00
Laurent Pinchart
f41ced8f10 Check fops_get() return value
Several subsystem open handlers dereference the fops_get() return value
without checking it for nullness.  This opens a race condition between the
open handler and module unloading.

A module can be marked as being unloaded (MODULE_STATE_GOING) before its
exit function is called and gets the chance to unregister the driver.
During that window open handlers can still be called, and fops_get() will
fail in try_module_get() and return a NULL pointer.

This change checks the fops_get() return value and returns -ENODEV if NULL.

Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:11 -08:00
Mark Brown
bd8a71a7b0 ALSA: Reduce boilerplate for new jack types
Use a lookup table rather than explicit code to map input subsystem jack
types into ASoC ones, implemented as suggested by Takashi Iwai.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-03 17:02:21 +00:00
Linus Torvalds
bb758e9637 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix warning in kernel/hrtimer.c
  x86: make sure we really have an hpet mapping before using it
  x86: enable HPET on Fujitsu u9200
  linux/timex.h: cleanup for userspace
  posix-timers: simplify de_thread()->exit_itimers() path
  posix-timers: check ->it_signal instead of ->it_pid to validate the timer
  posix-timers: use "struct pid*" instead of "struct task_struct*"
  nohz: suppress needless timer reprogramming
  clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
  nohz: no softirq pending warnings for offline cpus
  hrtimer: removing all ur callback modes, fix
  hrtimer: removing all ur callback modes, fix hotplug
  hrtimer: removing all ur callback modes
  x86: correct link to HPET timer specification
  rtc-cmos: export second NVRAM bank

Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.
2008-12-30 16:16:21 -08:00
Takashi Iwai
5ce442fe2c Merge branch 'topic/udev-id-rename' into to-push 2008-12-25 11:40:34 +01:00
Takashi Iwai
9649745c86 Merge branch 'topic/snd-hrtimer' into to-push 2008-12-25 11:40:32 +01:00
Takashi Iwai
a802269781 Merge branch 'topic/jack-mechanical' into to-push 2008-12-25 11:40:29 +01:00
Takashi Iwai
a65056205c Merge branch 'topic/hda' into to-push 2008-12-25 11:40:28 +01:00
Takashi Iwai
8afabfa74b Merge branch 'topic/convert-tasklet' into to-push 2008-12-25 11:40:27 +01:00
Takashi Iwai
0ff555192a Merge branch 'fix/hda' into topic/hda 2008-12-19 08:22:57 +01:00
Takashi Iwai
1f04128a3d ALSA: hda - Convert from takslet_hi_schedule() to tasklet_schedule()
Replace all tasklet_hi_schedule() callers with the normal
tasklet_schedule().  The former often causes troubles with
RT-kernels, and has actually no merit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-18 12:17:55 +01:00
Mark Brown
cdc6936432 ALSA: Add support for mechanical jack insertion
Some systems support both mechanical and electrical jack detection,
allowing them to report that a jack is physically present but does
not have any functioning connections. Add a new jack type for these,
allowing user space to report faulty connections.

Thanks to Guillem Jover for the suggestion.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10 15:10:44 +01:00
Takashi Iwai
5e03c54eeb ALSA: hrtimer - Use hard-irq callback
Use the hard-irq mode for the callback (for possible removal of
soft-irq mode in future).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-08 12:40:56 +01:00
Takashi Iwai
647808a6b9 ALSA: timer - Add comments and use ns_to_ktime()
Add the license and misc comments at the beginning of the code.
Also, use ns_to_ktime() for simplification.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-08 12:16:58 +01:00
Takashi Iwai
e7dd8c1bda Merge branch 'topic/misc' into topic/pcsp-fix
Conflicts:
	sound/drivers/pcsp/pcsp_lib.c
2008-11-26 14:12:42 +01:00
Hannes Eder
2af752936b sound: Fix warnings relating to ignored return value in snd_card_register
Do not ignore the return of 'device_create_file' in
'snd_card_register' and thereby fixing the following warnings:

sound/core/init.c: In function 'snd_card_register':
sound/core/init.c:640: warning: ignoring return value of
'device_create_file', declared with attribute warn_unused_result
sound/core/init.c:641: warning: ignoring return value of
'device_create_file', declared with attribute warn_unused_result

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-18 18:27:58 +01:00
Jaroslav Kysela
c2eb9c4ea3 ALSA: when card identification is changed, change also /proc/asound symlink
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-12 17:07:37 +01:00
Jaroslav Kysela
9fb6198e8c ALSA: add /sys/class/sound/card#/id (r/w) and card#/number (r/o) files
For udev, we need a way to rename soundcard names. The soundcard numbers
(indexes) are hardwired but we have a text identification which can be
changed at run-time. The ALSA user space tools already allow using of
this text identification.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-12 15:55:44 +01:00
Takashi Iwai
63cf123bf5 Merge branch 'topic/fix/misc' into topic/misc 2008-11-07 09:06:05 +01:00
Linus Torvalds
20ebc0073b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda: make a STAC_DELL_EQ option
  ALSA: emu10k1 - Add more invert_shared_spdif flag to Audigy models
  ALSA: hda - Add a quirk for another Acer Aspire (1025:0090)
  ALSA: remove direct access of dev->bus_id in sound/isa/*
  sound: struct device - replace bus_id with dev_name(), dev_set_name()
  ALSA: Fix PIT lockup on some chipsets when using the PC-Speaker
  ALSA: rawmidi - Add open check in rawmidi callbacks
  ALSA: hda - Add digital-mic for ALC269 auto-probe mode
  ALSA: hda - Disable broken mic auto-muting in Realtek codes
2008-11-03 10:14:59 -08:00
Takashi Iwai
7aeb6d7d20 Merge branches 'topic/fix/misc' and 'topic/fix/hda' into for-linus 2008-11-03 16:28:24 +01:00
Takashi Iwai
219df32fae ALSA: rawmidi - Add open check in rawmidi callbacks
The drivers (e.g. mtpav) may call rawmidi functions in irq handlers
even though the streams are not opened.  This results in Oops or panic.

This patch adds the rawmidi state check before actually operating the
rawmidi buffers.

Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-03 08:57:12 +01:00
Al Viro
233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Linus Torvalds
4ac08d36aa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ASoC: Fix WM9713 ALC Decay Time name
  ALSA: ASoC: Fix some minor errors in mpc5200 psc i2s driver
  ALSA: ASoC: Fix mono controls after conversion to support full int masks
  ALSA: sound/ice1712: indentation & braces disagree - add braces
  ALSA: usb - Add quirk for Edirol UA-25EX advanced modes
  sound: struct device - replace bus_id with dev_name(), dev_set_name()
  ALSA: hda - Add reboot notifier
  ALSA: Warn when control names are truncated
  ALSA: intel8x0 - add Dell Optiplex GX620 (AD1981B) to AC97 clock whitelist
  ALSA: hda - Fix SPDIF mute on IDT/STAC codecs
  ALSA: hda: Add HDA vendor ID for Wolfson Microelectronics
  ALSA: hda - Add another HP model for AD1884A
2008-10-30 11:44:35 -07:00
Takashi Iwai
0552f29795 Merge branches 'topic/fix/hda' and 'topic/fix/misc' into for-linus 2008-10-29 16:40:00 +01:00
Takashi Iwai
e78a37bc77 ALSA: Fix a typo in Kconfig
The previous commit bbaf5e9733 has
an obvious typo.  Fixed now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-29 16:08:01 +01:00
Mark Brown
366840d7e1 ALSA: Warn when control names are truncated
This is likely to confuse user interfaces since the end of the control
name is interpreted (eg, "Volume", "Switch").

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-29 15:44:04 +01:00
Takashi Iwai
4fc85e451f Merge branch 'topic/misc-next' into topic/misc 2008-10-27 08:50:43 +01:00
Matthew Ranostay
a53ccab3cc ALSA: jack: lineout support to jack abstraction layer
This patch introduces support for reporting SW_LINEOUT_INSERT detection events
via the jack abstraction layer.

Also adds a SND_JACK_LINEOUT define to the input system header.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-27 08:15:14 +01:00
Matthew Ranostay
282cd76ffc ALSA: hda: dynamic jack id
This patch duplicates the jack->id pointer with kstrdup() to prevent
scoping issues from calling autoprobing functions from the HDA section.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-27 08:15:14 +01:00
Takashi Iwai
bbaf5e9733 ALSA: Add hrtimer backend for ALSA timer interface
Added the hrtimer backend for ALSA timer interface.
It can be used for the sequencer timer source.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-24 18:16:50 +02:00
Al Viro
aeb5d72706 [PATCH] introduce fmode_t, do annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:06 -04:00
Takashi Iwai
975f6b0c1b Merge branches 'topic/asoc', 'topic/misc-fixes', 'topic/ps3-csbits' and 'topic/staging-fixes' into for-linus 2008-10-20 17:06:00 +02:00
Randy Dunlap
a66547f3a1 sound: add missing pcm kernel-doc
Fix alsa kernel-doc warning in linux-next:

Warning(linux-next-20081016//sound/core/pcm_misc.c:327): No description found for parameter 'samples'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-18 11:05:36 +02:00
Linus Torvalds
8eb88c80d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Fix debugfs_create_dir's error checking method for sound/soc/
  ALSA: ASoC: Convert playpaq_wm8510 to bulk route registration API
  ALSA: kernel docs: fix sound/core/ kernel-doc
  ALSA: Handle NULL jacks in snd_jack_report()
  ALSA: hda - Fix PCM type of Nvidia HDMI devices
2008-10-17 09:30:35 -07:00
Greg Kroah-Hartman
abe9ab8f62 device create: sound: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:44 -07:00
Takashi Iwai
76a4d10e52 ALSA: Print function symbol in the error messages
Use the new %pF for error messages in snd_device_*() functions
to give more understandable results.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-16 16:17:30 +02:00
Randy Dunlap
1c85cc6445 ALSA: kernel docs: fix sound/core/ kernel-doc
Add kernel-doc function short descriptions to sound/core functions that
are missing this short description.  Mostly this involves moving some of
the function description onto the @funcname line.

Also correct a few variable names and fix other kernel-doc notation.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-16 08:44:20 +02:00
Mark Brown
9a3f371e99 ALSA: Handle NULL jacks in snd_jack_report()
Facilitate drivers that wish to carry on if they can't create a jack
input device by handling attempts to report the state of a NULL jack,
removing the need to check for initialisation before use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-16 08:40:03 +02:00
David S. Miller
56c5d900db Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	sound/core/memalloc.c
2008-10-11 12:39:35 -07:00
Takashi Iwai
52948b3f7c ALSA: Add a note on dependency of RTC stuff
Added a note on the dependency of old RTC stuff, which is exclusive
with the new RTC class drivers.
    http://bugme.linux-foundation.org/show_bug.cgi?id=11430

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:55 +02:00
Takashi Iwai
d8009882e9 ALSA: use correct lock in snd_ctl_dev_disconnect()
The lock used in snd_ctl_dev_disconnect() should be card->ctl_files_rwlock
for protection of card->ctl_files entries, instead of card->controls_rwsem.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09 09:11:48 +02:00
Cliff Cai
7003609b3b ALSA: add dummy function to support shared mmap in nommu Blackfin arch
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-04 11:06:34 +02:00
David S. Miller
759ee81be6 alsa: Remove special SBUS dma support code.
No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:14:58 -07:00
David S. Miller
738f2b7b81 sparc: Convert all SBUS drivers to dma_*() interfaces.
And all the SBUS dma interfaces are deleted.

A private implementation remains inside of the 32-bit sparc port which
exists only for the sake of the implementation of dma_*().

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:13:15 -07:00
David S. Miller
7a715f4601 sparc: Make SBUS DMA interfaces take struct device.
This is the first step in converting all the SBUS drivers
over to generic dma_*().

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:13:12 -07:00
Tejun Heo
d886e87cb8 sound: make OSS sound core optional
sound/sound_core.c implements soundcore.ko and contains two parts -
sound_class which is shared by both ALSA and OSS and device
redirection support for OSS.  It's always compiled when any sound
support is enabled although it's necessary only when OSS (the actual
one or emulation) is enabled.  This is slightly wasteful and as device
redirection always registers character device region for major 14, it
prevents alternative implementation.

This patch introduces a new config SOUND_OSS_CORE which is selected
iff OSS support is actually necessary and build the OSS core part
conditionally.

If OSS is disabled, soundcore merely contains sound_class but leaving
it that way seems to be the simplest approach as otherwise sound_class
should be in ALSA core file if OSS is disabled but should be in
soundcore if OSS is enabled.  Also, there's also the user confusion
factor.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29 10:06:21 +02:00
Takashi Iwai
51e9f2e665 ALSA: Allocate larger pages in sgbuf
Most hardwares have limited buffer-descriptor table length.  This
also restricts the max buffer size of the sound driver.
For example, snd-hda-intel has 1MB buffer size limit, and this is
because it can have at most 256 BDL entries.  For supporting larger
buffers, we need to allocate larger pages even for sg-buffers.

This patch changes the sgbuf allocation code to try to allocate
larger pages first.  At each head of the allocated pages, the
number of allocated pages is stored in the lowest bits of the
corresponding entry of the table addr field.  This change isn't
visible as long as the driver uses snd_sgbuf_get_addr() helper.

Also, the patch adds a new function, snd_pcm_sgbuf_get_chunk_size().
This returns the size of the chunk on continuous pages starting at
the given position offset.  If the chunk reaches to a non-continuous
page, it returns the size to the boundary.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25 09:57:38 +02:00
Takashi Iwai
4e184f8fc0 ALSA: Fix allocation size calculation in snd_dma_alloc_pages_fallback()
snd_dma_alloc_pages_fallback() always tries to reduce the size in a half,
but it's not good when the given size isn't a power-of-two.
Check it first then try to align.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25 09:57:19 +02:00
Takashi Iwai
77a23f2695 ALSA: Clean up SG-buffer helper functions and macros
Clean up SG-buffer helper functions and macros.  Helpers take substream
as arguments now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25 09:57:18 +02:00
Takashi Iwai
0072889a55 ALSA: fix a typo during snd_assert() removal
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15 11:48:04 +02:00
Takashi Iwai
7eaa943c8e ALSA: Kill snd_assert() in sound/core/*
Kill snd_assert() in sound/core/*, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13 11:46:35 +02:00
Linus Torvalds
685d87f7cc Revert "pcm_native.c: remove unused label"
This reverts commit 680db0136e.  The label
is actually used, but hidden behind CONFIG_SND_DEBUG and the horrible
snd_assert() macro.

That macro could probably be improved to be along the lines of

	#define snd_assert(expr, args...) do { if ((void)(expr),0) { args; } } while (0)

or similar to make sure that we always both evaluate 'expr' and parse
'args', but while gcc should optimize it all away, I'm too lazy to
really verify that.  So I'll just admit defeat and will continue to live
with the annoying warning.

Noted-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Linus "Grr.." Torvalds
2008-08-06 19:26:20 -07:00
Linus Torvalds
680db0136e pcm_native.c: remove unused label
This fixes the warning

  sound/core/pcm_native.c: In function 'snd_pcm_fasync':
  sound/core/pcm_native.c:3262: warning: label 'out' defined but not used

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-06 15:14:13 -07:00
Willy Tarreau
82e68f7ffe sound: ensure device number is valid in snd_seq_oss_synth_make_info
snd_seq_oss_synth_make_info() incorrectly reports information
to userspace without first checking for the validity of the
device number, leading to possible information leak (CVE-2008-3272).

Reported-By: Tobias Klein <tk@trapkit.de>
Acked-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04 17:03:26 -07:00
Pawel MOLL
f90c06a2b6 ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices.

Additionally the device field of struct snd_pcm had to be changed to int,
as its "unsignednity" caused a lot of problems when comparing it to
potentially negative signed values. (-1 is 0xffffffff or even more then ;-)

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01 13:37:15 +02:00
Jaroslav Kysela
896e6cc20e sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.

New, updated patch with same subject replaces this commit.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01 13:36:04 +02:00
Pawel MOLL
9423969005 ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.

Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.

Signed-off-by: Pawel MOLL <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29 21:32:48 +02:00
Mark Brown
0d94e41abe ALSA: Build jack detection
Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:

config SND_FOO
        tristate "..."
        ...
        select SND_JACK if INPUT=y || INPUT=SND

to ensure that the jack detection API is enabled if the input subsystem
is.  If the input subsystem is not enabled then a stub version of the
API is provided.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29 21:32:06 +02:00
Mark Brown
e76d8ceaaf ALSA: Add jack reporting API
Currently very few systems provide information about jack status to user
space, even though many have hardware facilities to do detection. Those
systems that do use an input device with the existing SW_HEADPHONE_INSERT
switch type to do so, often independently of ALSA.

This patch introduces a standard method for representing jacks to user
space into ALSA. It allows drivers to register jacks for a sound card with
the input subsystem, binding the input device to the card to help user
space associate the input devices with their sound cards. The created
input devices are named in the form "card longname jack" where jack is
provided by the driver when allocating a jack. By default the parent for
the input device is the sound card but this can be overridden by the
card driver.

The existing user space API with SW_HEADPHONE_INSERT is preserved.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29 21:32:03 +02:00
Andrea Righi
27ac792ca0 PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:21 -07:00
Greg Kroah-Hartman
89409211ff device create: sound: convert device_create to device_create_drvdata
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:44 -07:00
Takashi Iwai
24e8fc498e ALSA: remove unneeded power_mutex lock in snd_pcm_drop
The power_mutex lock in snd_pcm_drop may cause a possible deadlock
chain, and above all, it's unneeded.  Let's get rid of it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-25 17:52:07 +02:00
Takashi Iwai
399ccdc1cd ALSA: fix locking in snd_pcm_open*() and snd_rawmidi_open*()
The PCM and rawmidi open callbacks have a lock against card->controls_list
but it takes a wrong one, card->controls_rwsem, instead of a right one
card->ctl_files_rwlock.  This patch fixes them.

This change also fixes automatically the potential deadlocks due to
mm->mmap_sem in munmap and copy_from/to_user, reported by Sitsofe
Wheeler:

  A: snd_ctl_elem_user_tlv(): card->controls_rwsem => mm->mmap_sem
  B: snd_pcm_open(): card->open_mutex => card->controls_rwsem
  C: munmap: mm->mmap_sem => snd_pcm_release(): card->open_mutex

The patch breaks the chain.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-25 14:51:03 +02:00
Linus Torvalds
d1794f2c5b Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
* 'bkl-removal' of git://git.lwn.net/linux-2.6: (146 commits)
  IB/umad: BKL is not needed for ib_umad_open()
  IB/uverbs: BKL is not needed for ib_uverbs_open()
  bf561-coreb: BKL unneeded for open()
  Call fasync() functions without the BKL
  snd/PCM: fasync BKL pushdown
  ipmi: fasync BKL pushdown
  ecryptfs: fasync BKL pushdown
  Bluetooth VHCI: fasync BKL pushdown
  tty_io: fasync BKL pushdown
  tun: fasync BKL pushdown
  i2o: fasync BKL pushdown
  mpt: fasync BKL pushdown
  Remove BKL from remote_llseek v2
  Make FAT users happier by not deadlocking
  x86-mce: BKL pushdown
  vmwatchdog: BKL pushdown
  vmcp: BKL pushdown
  via-pmu: BKL pushdown
  uml-random: BKL pushdown
  uml-mmapper: BKL pushdown
  ...
2008-07-14 14:48:31 -07:00
Jonathan Corbet
2fceef397f Merge commit 'v2.6.26' into bkl-removal 2008-07-14 15:29:34 -06:00
Johannes Berg
ee2da99782 ALSA: remove CONFIG_KMOD from sound
A bunch of things in alsa depend on CONFIG_KMOD,
use CONFIG_MODULES instead where the dependency
is needed at all.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:32:58 +02:00
Jonathan Corbet
2db9f0a35a snd/PCM: fasync BKL pushdown
Chances are this is unneeded, but the code is twisty enough that it is hard
to tell.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-07-02 15:06:28 -06:00
Jonathan Corbet
78a3c3d7c6 sound: cdev lock_kernel() pushdown
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-06-20 14:05:50 -06:00
Takashi Iwai
d3bd67cdbb ALSA: make snd_ctl_elem_read() and snd_ctl_elem_write() static
snd_ctl_elem_read() and snd_ctl_elem_write() are no longer used by
any other drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13 16:48:49 +02:00
Takashi Iwai
a93bbaa77e [ALSA] Improve the slots option handling
Fix and improve the slots option handling.  The sound core tries to
find the slot with the given module name first and assign if it's
still available.  If all pre-given slots are unavailable, then try
to find another free slot.

Also, when a module name begins with '!', it means the negative match:
the slot will be given for any modules but that one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-28 15:14:32 +02:00
Takashi Iwai
62cf872a8e [ALSA] Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE
Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to
represent its meaning more better.  This config isn't provided only
for the detection but for more verbose debug prints in general.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 15:56:21 +02:00
Takashi Iwai
89fe511792 sound: Convert to menuconfig
Convert menu in sound Kconfig files to menuconfig and if.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 15:56:20 +02:00
Greg Kroah-Hartman
5d99a8b814 SOUND: fix race in device_create
There is a race from when a device is created with device_create() and
then the drvdata is set with a call to dev_set_drvdata() in which a
sysfs file could be open, yet the drvdata will be NULL, causing all
sorts of bad things to happen.

This patch fixes the problem by using the new function,
device_create_drvdata().

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-20 13:31:55 -07:00
Takashi Iwai
c17cf06bfc [ALSA] Remove unneeded ugly hack for i386 in memalloc.c
The hack for dma_alloc_coherent() is no longer needed on 2.6.26 since
the base code was improved.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:15 +02:00
Denis V. Lunev
7bf4e6d3e9 sound: use non-racy method for /proc/driver/snd-page-alloc creation
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to
main tree.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:20 -07:00
Alexey Dobriyan
c74c120a21 proc: remove proc_root from drivers
Remove proc_root export.  Creation and removal works well if parent PDE is
supplied as NULL -- it worked always that way.

So, one useless export removed and consistency added, some drivers created
PDEs with &proc_root as parent but removed them as NULL and so on.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:18 -07:00
Takashi Iwai
f18638dcf0 [ALSA] Clean up snd_card_free*()
A little clean up of snd_card_free*().
Removed snd_card_free_prepare() since it's actually almost identical
with snd_card_disconnect().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:39 +02:00
Takashi Iwai
73d38b13ff [ALSA] Fix the race of card instance unregistration
Move the call of device_unregister() for the card instance in
snd_card_disconnect() to avoid the race of sysfs card entry, which
can be typically found on usb-audio reconnection.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:39 +02:00
Nick Andrew
a295e09e89 [ALSA] sound: this amplifier only goes up to 7
sound: kernel log levels are 0-7

Kernel log levels are 0-7, not 0-9.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:35 +02:00
Harvey Harrison
9bf8e7ddea [ALSA] sound: replace remaining __FUNCTION__ occurences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:20 +02:00
Takashi Iwai
c354cd7d96 [ALSA] seq-oss - Remove invalid BUG()
Removed invalid BUG() - the driver should handle the error case properly
rather than issuing BUG().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:14 +02:00
Takashi Iwai
1c82ed1bc5 [ALSA] Keep private TLV entry in vmaster itself
Use a private array for TLV entries of virtual master controls instead
of (supposed) static array.  This cleans up the existing codes.

Also, now vmaster assumes the simple dB-range TLV that is the only type
it can handle.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:12 +02:00
Takashi Iwai
e922b0028f [ALSA] Move vmaster code to sound core
Move the codes for virtual master controls to sound core part so that
not only hda-intel drivers can use it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:12 +02:00
Takashi Iwai
6c4cc3a8ed [ALSA] Add more fallbacks to OSS PHONEOUT mixer map
Added more fallbacks to OSS PHONEOUT mixer mapping.  This corresponds
to the speaker output in general, so now "Mono" and "Speaker" are
assigned.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:07 +02:00
Jan Blunck
0d63e4f9ea Dont touch fs_struct in drivers
The sound drivers and the pnpbios core test for current->root != NULL.  This
test seems to be unnecessary since we always have rootfs mounted before
initializing the drivers.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:13:32 -08:00
Mark Gross
f011e2e2df latency.c: use QoS infrastructure
Replace latency.c use with pm_qos_params use.

Signed-off-by: mark gross <mgross@linux.intel.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:22 -08:00
Takashi Iwai
4939c66034 [ALSA] Fix Oops with PCM OSS sync
The PCM OSS emulation can cause Oops at sync operation due to the wrong
data size calculation.  Typically happening on Sparc64:
	http://lkml.org/lkml/2008/1/24/426

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:20 +01:00
Miguel Boton
bc9abce0de [ALSA] fix compilation warning in GCC
'snd_shutdown_f_ops' is not a pointer so its address will never be NULL.
GCC will complain because 'fops_get' will do an unnecessary check because
'&snd_shutdown_f_ops' is always true.

Signed-off-by: Miguel Boton <mboton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:56 +01:00
Jaroslav Kysela
8c12158687 [ALSA] PCM interface - rename SNDRV_PCM_TSTAMP_MMAP to SNDRV_PCM_TSTAMP_ENABLE
Change semantics for SNDRV_PCM_TSTAMP_MMAP. Doing timestamping only in
the interrupt handler might cause that hw_ptr is not related to actual
timestamp. With this change, grab timestamp at every hw_ptr update to
have always valid timestamp + ring buffer position pair.
With this change, SNDRV_PCM_TSTAMP_MMAP was renamed to
SNDRV_PCM_TSTAMP_ENABLE. It's no regression (I think).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:54 +01:00
Marcin Ślusarz
17596a80d3 [ALSA] rawmidi: let sparse know what is going on _for real_
snd_rawmidi_kernel_read1/write1 weren't annotated but used
copy_to_user/copy_from_user when one of parameters (kernel) was equal to 0
remove it and add properly annotated parameter

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:49 +01:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Takashi Iwai
31e8960b35 [ALSA] Remove PCM sleep_min and tick
The 'tick' in PCM is set (again) via sw_params.  And, nobody uses
this feature at all except for a command line option of aplay.
(This is literally 'nobody', as I checked alsa-lib API calls in all
 programs in major distros.)
Above all, if we need finer wake-ups for the position update, it's
basically an issue that the driver should solve, not tuned by each
application.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:47 +01:00
Takashi Iwai
130755108b [ALSA] PCM - clean up snd_pcm_lib_read/write
Introduce a common helper function for snd_pcm_lib_read and snd_pcm_lib_write
for cleaning up the code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:47 +01:00
Takashi Iwai
d948035a92 [ALSA] Remove PCM xfer_align sw params
The xfer_align sw_params parameter has never been used in a sane manner,
and no one understands what this does exactly.  The current
implementation looks also buggy because it allows write of shorter size
than xfer_align.  So, if you do partial writes, the write isn't actually
aligned at all.
Removing this parameter will make some pcm_lib_* code more readable
(and less buggy).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:47 +01:00
Takashi Iwai
fa5717f209 [ALSA] Fix PCM write blocking
The snd_pcm_lib_write1() may block in some weird condition:
  - the stream isn't started
  - avail_min is big (e.g. period size)
  - partial write up to buffer_size - avail_min
The patch fixes this invalid blocking problem.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:46 +01:00
Takashi Iwai
8ace4f3c9d [ALSA] Remove indirect control access
This patch removes the indirect control access to the control elements.
The indirect access has never been used and is even broken on 32bit
ioctl wrapper.  Let's clean it up.
The pointers still remain in snd_ctl_elem_* structs just to make sure
that the struct size won't change.  Once after checking the size
consistency, we can get rid of them, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:46 +01:00
Jaroslav Kysela
a713b58347 [ALSA] PCM core - remove SNDRV_PCM_TSTAMP_MMAP condition in snd_pcm_status()
The condition caused that the returned ring buffer position does not match
with timestamp when SNDRV_PCM_TSTAMP_MMAP mode was enabled. Removing
condition makes unified behaviour and interrupt based timestamp can be
accessed via PCM_IOCTL_SYNC_PTR or mmaped status area.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:46 +01:00
Takashi Iwai
5a7f261921 [ALSA] Add SNDRV_PCM_IOCTL_TSTAMP back to compat ioctl
The replaced one should be re-added for older alsa-lib.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:36 +01:00
Jaroslav Kysela
28e9e47384 [ALSA] PCM - added back TSTAMP ioctl for PCM (for old alsa-lib binaries)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:36 +01:00
Marcin Ślusarz
3b378e1f7e [ALSA] sound/core/seq: move declarations of globally visible variables to proper headers
sound/core/seq: move declarations of globally visible variables to proper headers

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:35 +01:00
Marcin Ślusarz
36b9cdfea6 [ALSA] info_oss: move prototype of snd_card_info_read_oss to info.h
info_oss: move prototype of snd_card_info_read_oss to info.h

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:35 +01:00
Marcin Ślusarz
67c393172c [ALSA] pcm_lib: fix sparse warning about different signedness
pcm_lib: fix sparse warning about different signedness

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:35 +01:00
Marcin Ślusarz
be3e0115e3 [ALSA] pcm_lib: fix sparse warning about shadowing 'n' symbol
pcm_lib: fix sparse warning about shadowing 'n' symbol

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:35 +01:00
Marcin Ślusarz
b05e578740 [ALSA] pcm_native: fix sparse warning about shadowing 'state' symbol
pcm_native: fix sparse warning about shadowing 'state' symbol

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:35 +01:00
Andrew Morton
5050b0921a [ALSA] copy_ctl_value_from_user() warning fix
sound/core/control_compat.c: In function 'copy_ctl_value_from_user':
sound/core/control_compat.c:222: warning: 'count' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:34 +01:00
Takashi Iwai
6b587ef9a1 [ALSA] Fix old tstamp ioctl for compat_ioctl
Replaced the old SNDRV_PCM_IOCTL_TSTAMP with the new one in
PCM compat_ioctl.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:34 +01:00
Nick Piggin
3ad5afcd5f [ALSA] alsa: nopage
Convert ALSA from nopage to fault.
Switch from OOM to SIGBUS if the resource is not available.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:32 +01:00
Jaroslav Kysela
67a7be7e9c [ALSA] PCM - fixed SNDRV_PCM_FORMAT_U24_BE silence constant
Reported by Timur Tabi <timur@freescale.com> .

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:31 +01:00
Jaroslav Kysela
b751eef1fd [ALSA] Use posix clock monotonic for PCM and timer timestamps
We need an accurate and continuous (monotonic) time sources to do
accurate synchronization among more timing sources. This patch allows
to enable monotonic timestamps for ALSA PCM devices and enables monotonic
timestamps for ALSA timer devices.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:31 +01:00
Julia Lawall
df1deb6753 [ALSA] sound/core/memalloc.c: Add missing pci_dev_put
There should be a pci_dev_put when breaking out of a loop that iterates
over calls to pci_get_device and similar functions.
In this case, the return under the initial if needs a pci_dev_put in the
same way that the return under the subsequent for loop has a pci_dev_put.
This was fixed using the following semantic patch.
// <smpl>
@@
type T;
identifier d;
expression e;
@@
T *d;
...
while ((d = \(pci_get_device\|pci_get_device_reverse\|pci_get_subsys\|pci_get_class\)(..., d)) != NULL)
  {... when != pci_dev_put(d)
       when != e = d
(
    return d;
|
+  pci_dev_put(d);
?  return ...;
)
...}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:30 +01:00
Takashi Iwai
7c7fc2d44b [ALSA] Fix PCM MMAP time-stamp mode
When MMAP time-stamp mode is given, it's supposed to update the time-stamp
only at period boundary.  However, it currently updates at each status call
so this is just useless.  The patch fixes this misbehavior.
Also it fixes the wrong check of tstamp_mode (don't use bit-and for enum).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:28 +01:00
Takashi Iwai
e5723b41ab [ALSA] Remove sequencer instrument layer
Remove sequencer instrument layer from the tree.
This mechanism hasn't been used much with the actual devices.  The only
reasonable user was OPL3 loader, and now it was rewritten to use hwdep
instead.  So, let's remove the rest of rotten codes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:13 +01:00
Takashi Iwai
304cd07f92 [ALSA] Introduce slots option to snd module
Introduced the global 'slots' option to snd module.  This option provides
an alternative way to handle the order of multiple sound card instances.
It's an easier approach to avoid conflict with hotplug devices, and can
be used together with the existing 'order' option of each card driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:11 +01:00
Jean Delvare
22a860a9e2 snd_mixer_oss_build_input(): fix for __you_cannot_kmalloc_that_much failure with gcc-3.2
Rework this functions so that gcc-3.2 can successfully perform
constant-folding.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08 16:10:36 -08:00
Borislav Petkov
7507e8da2f [ALSA] sound/core/control.c: hard-irq-safe -> hard-irq-unsafe lock warning
The lock grabbed in snd_ctl_empty_read_queue() is hardirq-unsafe but we hold
an hardirq-safe one already, so make the &ctl->read_lock also hard-irq-safe.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23 08:07:55 +02:00
Robert P. J. Day
3a4fa0a25d Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Jaroslav Kysela
c1017a4cdb [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:18 +02:00
Mariusz Kozlowski
2469049e72 [ALSA] sound: snd_register_device_for_dev fix
snd_register_device_for_dev() can oops when device_create() returns
ERR_PTR(err).
Scenario:
preg->dev = device_create(...); /* fails */
if (preg->dev) /* contains ERR_PTR(err) */
	dev_set_drvdata(preg->dev, private_data);
and dev_set_drvdata() looks like this:
static inline void
dev_set_drvdata (struct device *dev, void *data)
{
	dev->driver_data = data; <--- boom
}
This patch should prevent that.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:51:06 +02:00
Rene Herman
c929e5ef4f [ALSA] schedule_timeout() fix for core/seq/seq_instr.c
Replace schedule_timeout() with schedule_timeout_uninterruptible()
to avoid signals in loop.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:55 +02:00
Adrian Bunk
9ecf60df45 [ALSA] unexport snd_ctl_elem_{read,write}
snd_ctl_elem_{read,write} no longer have any modular users

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:49:19 +02:00
Clemens Ladisch
918f3a0e8c [ALSA] pcm: add snd_pcm_rate_to_rate_bit() helper
Add a snd_pcm_rate_to_rate_bit() function to factor out common code used
by several drivers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:54 +02:00
Clemens Ladisch
7653d55760 [ALSA] pcm: merge rates[] from pcm_misc.c and pcm_native.c
Merge the rates[] arrays from pcm_misc.c and pcm_native.c because they
are both the same.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:53 +02:00
Clemens Ladisch
0e75182cf3 [ALSA] seq_midi_event: fix parsing of F9/FD bytes
Check for a valid event type when encoding a system real-time message to
prevent the bytes F9 or FD resulting in an empty sequencer message.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:38 +02:00
Clemens Ladisch
bf8c1382c0 [ALSA] seq_midi_event: fix parsing of missing data bytes
Reorganize the encoder logic to prevent status bytes that appear where
data bytes are expected from being interpreted as data bytes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:37 +02:00
Clemens Ladisch
0b664f7206 [ALSA] seq_midi_event: prevent running status after system messages
Reset the event type after encoding a system message to prevent any
following data bytes from being interpreted as data for a running status
system message, which is not allowed in MIDI.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:36 +02:00
Clemens Ladisch
394d051686 [ALSA] seq_midi_event: fix encoding of data bytes after end of sysex
Create a new state ST_INVALID for the encoder to prevent data bytes at
the beginning of a stream or after a sysex message being interpreted as
note-off parameters.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:35 +02:00
Takashi Iwai
24038a25e7 [ALSA] Add new AFMT_* formats for OSS emulation
The recent OSS includes the support for 32bit and other formats, which
we already have, too.  Let's define and map them.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:33 +02:00
Takashi Iwai
64d27f96cb [ALSA] Support 3-bytes 24bit format in PCM OSS emulation
Add the support of 3-bytes 24bit formats in PCM OSS emulation.
Also removed snd_pcm_build_linear_format() function.  It's exported
just for OSS emulation, and now the code was changed without calling
this function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:31 +02:00
Takashi Iwai
9390ec85c0 [ALSA] Simplify the format conversion in PCM OSS emulation
Simplify the format conversion code in PCM OSS emulation.
This patch also adds the support of 3bytes 24bit formats with linear
and mulaw, but they are not enabled in pcm_plugin.c yet.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:31 +02:00
Takashi Iwai
887f9f0253 [ALSA] Remove ifdefs from OSS PCM emulation codes
Fix Makefile to compile files conditionally to CONFIG_SND_PCM_OSS_PLUGINS,
and remove unneeded ifdefs in these files.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:30 +02:00
Eugene Teo
7034632d88 [ALSA] seq: resource leak fix and various code cleanups
This patch fixes:
1) a resource leak (CID: 1817)
2) various code cleanups

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:28 +02:00
Takashi Iwai
52a6db82ef [ALSA] Clean up Makefile
Clean up Makefile using xxx- style instead of
ifeq(CONFIG_XXX,y).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:05 +02:00
Takashi Iwai
8f11551b17 [ALSA] Fix build error without CONFIG_HAS_DMA
The recent change of include/asm-generic/dma-mapping-broken.h breaks
the build without CONFIG_HAS_DMA.  This patch is an ad hoc fix.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:05 +02:00
Takashi Iwai
b9ed4f2b68 [ALSA] Add helper functions for frequently used callbacks
Added helper functions for frequenty used callbacks:
  snd_ctl_boolean_mono_info() and snd_ctl_boolean_stereo_info()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:57:44 +02:00
Jesper Juhl
25765c4e5d [ALSA] Clean up duplicate includes in sound/core/
This patch cleans up duplicate includes in
	sound/core/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:03:19 +02:00
Takashi Iwai
ccec6e2c4a Convert snd-page-alloc proc file to use seq_file
Use seq_file for the proc file read/write of snd-page-alloc module.
This automatically fixes bugs in the old proc code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-24 08:20:52 -07:00
Clemens Ladisch
7c64ec343a [ALSA] timer: check for incorrect device state in non-debug compiles, too
Convert the snd_assert()s to simple if()s to prevent crashes when one of
the timer instance ioctls is called before the file is bound to a timer
device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:54 +02:00
Takashi Iwai
1a7fa543cb [ALSA] Fix substream to check in PCM drain
The check of a substream in snd_pcm_drain() might not be always correct
since runtime can point a different substream (although the PCM state
of each linked substream should be same, in theory).
This patch fixes it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:46 +02:00