Currently lists are being used to manage this, but best practice is
usually to have these in an array instead as that it cheaper to manage.
Outside of that detail, games are also played with KASAN as the list
is inside the cached entry itself.
Finally, all users of this need a struct io_cache_entry embedded in
their struct, which is union'ized with something else in there that
isn't used across the free -> realloc cycle.
Get rid of all of that, and simply have it be an array. This will not
change the memory used, as we're just trading an 8-byte member entry
for the per-elem array size.
This reduces the overhead of the recycled allocations, and it reduces
the amount of code code needed to support recycling to about half of
what it currently is.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's now unused, drop the code related to it. This includes the
io_issue_defs->manual alloc field.
While in there, and since ->async_size is now being used a bit more
frequently and in the issue path, move it to io_issue_defs[].
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Basic conversion ensuring async_data is allocated off the prep path. Adds
a basic alloc cache as well, as passthrough IO can be quite high in rate.
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
read/write requests try to put everything on the stack, and then alloc
and copy if a retry is needed. This necessitates a bunch of nasty code
that deals with intermediate state.
Get rid of this, and have the prep side setup everything that is needed
upfront, which greatly simplifies the opcode handlers.
This includes adding an alloc cache for io_async_rw, to make it cheap
to handle.
In terms of cost, this should be basically free and transparent. For
the worst case of {READ,WRITE}_FIXED which didn't need it before,
performance is unaffected in the normal peak workload that is being
used to test that. Still runs at 122M IOPS.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For historical reasons these were special cased, as they were the only
ones that needed cancelation. But now we handle cancelations generally,
and hence there's no need to check for these in
io_ring_ctx_wait_and_kill() when io_uring_try_cancel_requests() handles
both these and the rest as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_req_complete_post() to push all IORING_SETUP_IOPOLL requests
to task_work, it's much cleaner and should normally happen. We couldn't
do it before because there was a possibility of looping in
complete_post() -> tw -> complete_post() -> ...
Also, unexport the function and inline __io_req_complete_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/ea19c032ace3e0dd96ac4d991a063b0188037014.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task_work execution is now always locked, and we shouldn't get into
io_req_complete_post() from them. That means that complete_post() is
always called out of the original task context and we don't even need to
check current.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/24ec27f27db0d8f58c974d8118dca1d345314ddc.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_post_aux_cqe(), which is used for multishot requests, delays
completions by putting CQEs into a temporary array for the purpose
completion lock/flush batching.
DEFER_TASKRUN doesn't need any locking, so for it we can put completions
directly into the CQ and defer post completion handling with a flag.
That leaves !DEFER_TASKRUN, which is not that interesting / hot for
multishot requests, so have conditional locking with deferred flush
for them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/b1d05a81fd27aaa2a07f9860af13059e7ad7a890.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The restriction on multishot execution context disallowing io-wq is
driven by rules of io_fill_cqe_req_aux(), it should only be called in
the master task context, either from the syscall path or in task_work.
Since task_work now always takes the ctx lock implying
IO_URING_F_COMPLETE_DEFER, we can just assume that the function is
always called with its defer argument set to true.
Kill the argument. Also rename the function for more consistency as
"fill" in CQE related functions was usually meant for raw interfaces
only copying data into the CQ without any locking, waking the user
and other accounting "post" functions take care of.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/93423d106c33116c7d06bf277f651aa68b427328.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ctx is always locked for task_work now, so get rid of struct
io_tw_state::locked. Note I'm stopping one step before removing
io_tw_state altogether, which is not empty, because it still serves the
purpose of indicating which function is a tw callback and forcing users
not to invoke them carelessly out of a wrong context. The removal can
always be done later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/e95e1ea116d0bfa54b656076e6a977bc221392a4.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can run normal task_work without locking the ctx, however we try to
lock anyway and most handlers prefer or require it locked. It might have
been interesting to multi-submitter ring with high contention completing
async read/write requests via task_work, however that will still need to
go through io_req_complete_post() and potentially take the lock for
rsrc node putting or some other case.
In other words, it's hard to care about it, so alawys force the locking.
The case described would also because of various io_uring caches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/6ae858f2ef562e6ed9f13c60978c0d48926954ba.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kiocb_done() should care to specifically redirecting requests to io-wq.
Remove the hopping to tw to then queue an io-wq, return -EAGAIN and let
the core code io_uring handle offloading.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/413564e550fe23744a970e1783dfa566291b0e6f.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bunch of flags that are purely based on what the file
operations support while also never being conditionally set or unset.
IOW, they're not subject to change for individual files. Imho, such
flags don't need to live in f_mode they might as well live in the fops
structs itself. And the fops struct already has that lonely
mmap_supported_flags member. We might as well turn that into a generic
fop_flags member and move a few flags from FMODE_* space into FOP_*
space. That gets us four FMODE_* bits back and the ability for new
static flags that are about file ops to not have to live in FMODE_*
space but in their own FOP_* space. It's not the most beautiful thing
ever but it gets the job done. Yes, there'll be an additional pointer
chase but hopefully that won't matter for these flags.
I suspect there's a few more we can move into there and that we can also
redirect a bunch of new flag suggestions that follow this pattern into
the fop_flags field instead of f_mode.
Link: https://lore.kernel.org/r/20240328-gewendet-spargel-aa60a030ef74@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This bug was introduced in commit 950e79dd73 ("io_uring: minor
io_cqring_wait() optimization"), which was made in preparation for
adc8682ec6 ("io_uring: Add support for napi_busy_poll"). The latter
got reverted in cb31821673 ("Revert "io_uring: Add support for
napi_busy_poll""), so simply undo the former as well.
Cc: stable@vger.kernel.org
Fixes: 950e79dd73 ("io_uring: minor io_cqring_wait() optimization")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Link: https://lore.kernel.org/r/20240405125551.237142-1-izbyshev@ispras.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we look up the kbuf, ensure that it doesn't get unregistered until
after we're done with it. Since we're inside mmap, we cannot safely use
the io_uring lock. Rely on the fact that we can lookup the buffer list
under RCU now and grab a reference to it, preventing it from being
unregistered until we're done with it. The lookup returns the
io_buffer_list directly with it referenced.
Cc: stable@vger.kernel.org # v6.4+
Fixes: 5cf4f52e6d ("io_uring: free io_buffer_list entries via RCU")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just rely on the xarray for any kind of bgid. This simplifies things, and
it really doesn't bring us much, if anything.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use the system unbound event workqueue, use an io_uring
specific one. This avoids dependencies with the tty, which also uses
the system_unbound_wq, and issues flushes of said workqueue from inside
its poll handling.
Cc: stable@vger.kernel.org
Reported-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Iskren Chernev <me@iskren.info>
Link: https://github.com/axboe/liburing/issues/1113
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do the same check for direct io-wq execution for multishot requests that
commit 2a975d426c did for the inline execution, and disable multishot
mode (and revert to single shot) if the file type doesn't support NOWAIT,
and isn't opened in O_NONBLOCK mode. For multishot to work properly, it's
a requirement that nonblocking read attempts can be done.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If failure happens before the opcode prep handler is called, ensure that
we clear the opcode specific area of the request, which holds data
specific to that request type. This prevents errors where opcode
handlers either don't get to clear per-request private data since prep
isn't even called.
Reported-and-tested-by: syzbot+f8e9a371388aa62ecab4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Looking at the error path of __io_uaddr_map, if we fail after pinning
the pages for any reasons, ret will be set to -EINVAL and the error
handler won't properly release the pinned pages.
I didn't manage to trigger it without forcing a failure, but it can
happen in real life when memory is heavily fragmented.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Fixes: 223ef47431 ("io_uring: don't allow IORING_SETUP_NO_MMAP rings on highmem pages")
Link: https://lore.kernel.org/r/20240313213912.1920-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We make a few cancellation judgements based on ctx->rings, so let's
zero it afer deallocation for IORING_SETUP_NO_MMAP just like it's
done with the mmap case. Likely, it's not a real problem, but zeroing
is safer and better tested.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9ff6cdf91429b8a51699c210e1f6af6ea3f8bdcf.1710255382.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This kind of state is per-syscall, and since we're doing the waiting off
entering the io_uring_enter(2) syscall, there's no way that iowait can
already be set for this case. Simplify it by setting it if we need to,
and always clearing it to 0 when done.
Fixes: 7b72d661f1 ("io_uring: gate iowait schedule on having pending requests")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We disallow DEFER_TASKRUN multishots from running by io-wq, which is
checked by individual opcodes in the issue path. We can consolidate all
it in io_wq_submit_work() at the same time moving the checks out of the
hot path.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e492f0f11588bb5aa11d7d24e6f53b7c7628afdb.1709905727.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function now deals only with discarding overflow entries on ring
free and exit, and it no longer returns whether we successfully flushed
all entries as there's no CQE posting involved anymore. Kill the
outdated comment.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there's no current work on the list, we still need to potentially
wake the SQPOLL task if it is sleeping. This is ordered with the
wait queue addition in sqpoll, which adds to the wait queue before
checking for pending work items.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While testing io_uring NAPI with DEFER_TASKRUN, I ran into slowdowns and
stalls in packet delivery. Turns out that while
io_napi_busy_loop_should_end() aborts appropriately on regular
task_work, it does not abort if we have local task_work pending.
Move io_has_work() into the private io_uring.h header, and gate whether
we should continue polling on that as well. This makes NAPI polling on
send/receive work as designed with IORING_SETUP_DEFER_TASKRUN as well.
Fixes: 8d0c12a80c ("io-uring: add napi busy poll support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changes to AF_UNIX trigger rebuild of io_uring, but io_uring does
not use AF_UNIX anymore.
Let's not include af_unix.h and instead include necessary headers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240212234236.63714-1-kuniyu@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds the napi busy polling support in io_uring.c. It adds a new
napi_list to the io_ring_ctx structure. This list contains the list of
napi_id's that are currently enabled for busy polling. The list is
synchronized by the new napi_lock spin lock. The current default napi
busy polling time is stored in napi_busy_poll_to. If napi busy polling
is not enabled, the value is 0.
In addition there is also a hash table. The hash table store the napi
id and the pointer to the above list nodes. The hash table is used to
speed up the lookup to the list elements. The hash table is synchronized
with rcu.
The NAPI_TIMEOUT is stored as a timeout to make sure that the time a
napi entry is stored in the napi list is limited.
The busy poll timeout is also stored as part of the io_wait_queue. This
is necessary as for sq polling the poll interval needs to be adjusted
and the napi callback allows only to pass in one value.
This has been tested with two simple programs from the liburing library
repository: the napi client and the napi server program. The client
sends a request, which has a timestamp in its payload and the server
replies with the same payload. The client calculates the roundtrip time
and stores it to calculate the results.
The client is running on host1 and the server is running on host 2 (in
the same rack). The measured times below are roundtrip times. They are
average times over 5 runs each. Each run measures 1 million roundtrips.
no rx coal rx coal: frames=88,usecs=33
Default 57us 56us
client_poll=100us 47us 46us
server_poll=100us 51us 46us
client_poll=100us+ 40us 40us
server_poll=100us
client_poll=100us+ 41us 39us
server_poll=100us+
prefer napi busy poll on client
client_poll=100us+ 41us 39us
server_poll=100us+
prefer napi busy poll on server
client_poll=100us+ 41us 39us
server_poll=100us+
prefer napi busy poll on client + server
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Suggested-by: Olivier Langlois <olivier@trillion01.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230608163839.2891748-5-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This moves the definition of the io_wait_queue structure to the header
file so it can be also used from other files.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Link: https://lore.kernel.org/r/20230608163839.2891748-4-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 0a31bd5f2b ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240130100247.81460-1-chentao@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Decouple from task_work running, and cap the number of entries we process
at the time. If we exceed that number, push remaining entries to a retry
list that we'll process first next time.
We cap the number of entries to process at 8, which is fairly random.
We just want to get enough per-ctx batching here, while not processing
endlessly.
Since we manually run PF_IO_WORKER related task_work anyway as the task
never exits to userspace, with this we no longer need to add an actual
task_work item to the per-process list.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for returning
something other than count from this helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we don't loop around task_work anymore, there's no point in
maintaining the ring and locked state outside of handle_tw_list(). Get
rid of passing in those pointers (and pointers to pointers) and just do
the management internally in handle_tw_list().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have a ton of notifications coming in, we can be looping in here
for a long time. This can be problematic for various reasons, mostly
because we can starve userspace. If the application is waiting on N
events, then only re-run if we need more events.
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We just reversed the task_work list and that will have touched requests
as well, just get rid of this optimization as it should not make a
difference anymore.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For local task_work, which is used if IORING_SETUP_DEFER_TASKRUN is set,
we reverse the order of the lockless list before processing the work.
This is done to process items in the order in which they were queued, as
the llist always adds to the head.
Do the same for traditional task_work, so we have the same behavior for
both types.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer loop in task_work handling, hence delete the argument from
the tracepoint as it's always 1 and hence not very informative.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit added looping around handling traditional task_work
as an optimization, and while that may seem like a good idea, it's also
possible to run into application starvation doing so. If the task_work
generation is bursty, we can get very deep task_work queues, and we can
end up looping in here for a very long time.
One immediately observable problem with that is handling network traffic
using provided buffers, where flooding incoming traffic and looping
task_work handling will very quickly lead to buffer starvation as we
keep running task_work rather than returning to the application so it
can handle the associated CQEs and also provide buffers back.
Fixes: 3a0c037b0e ("io_uring: batch task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the ctx declaration and assignment up to be generally available
in the function, as we use req->ctx at the top anyway.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds a flag to avoid dipping dereferencing file and then f_op to
figure out if the file has a poll handler defined or not. We generally
call this at least twice for networked workloads, and if using ring
provided buffers, we do it on every buffer selection. Particularly the
latter is troublesome, as it's otherwise a very fast operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just leave it unset by default, avoiding dipping into the last
cacheline (which is otherwise untouched) for the fast path of using
poll to drive networked traffic. Add a flag that tells us if the
sequence is valid or not, and then we can defer actually assigning
the flag and sequence until someone runs cancelations.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're out of space here, and none of the flags are easily reclaimable.
Bump it to 64-bits and re-arrange the struct a bit to avoid gaps.
Add a specific bitwise type for the request flags, io_request_flags_t.
This will help catch violations of casting this value to a smaller type
on 32-bit archs, like unsigned int.
This creates a hole in the io_kiocb, so move nr_tw up and rsrc_node down
to retain needing only cacheline 0 and 1 for non-polled opcodes.
No functional changes intended in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=rd3Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/io_uring-2024-01-18' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Nothing major in here, just a few fixes and cleanups that arrived
after the initial merge window pull request got finalized, as well as
a fix for a patch that got merged earlier"
* tag 'for-6.8/io_uring-2024-01-18' of git://git.kernel.dk/linux:
io_uring: combine cq_wait_nr checks
io_uring: clean *local_work_add var naming
io_uring: clean up local tw add-wait sync
io_uring: adjust defer tw counting
io_uring/register: guard compat syscall with CONFIG_COMPAT
io_uring/rsrc: improve code generation for fixed file assignment
io_uring/rw: cleanup io_rw_done()
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Instead of explicitly checking ->cq_wait_nr for whether there are
waiting, which is currently represented by 0, we can store there a
large value and the nr_tw will automatically filter out those cases.
Add a named constant for that and for the wake up bias value.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/38def30282654d980673976cd42fde9bab19b297.1705438669.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
if (!first) { ... }
While it reads as do something if it's not the first entry, it does
exactly the opposite because "first" here is a pointer to the first
entry. Remove the confusion by renaming it into "head".
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3b8be483b52f58a524185bb88694b8a268e7e85d.1705438669.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The UINT_MAX work item counting bias in io_req_local_work_add() in case
of !IOU_F_TWQ_LAZY_WAKE works in a sense that we will not miss a wake up,
however it's still eerie. In particular, if we add a lazy work item
after a non-lazy one, we'll increment it and get nr_tw==0, and
subsequent adds may try to unnecessarily wake up the task, which is
though not so likely to happen in real workloads.
Half the bias, it's still large enough to be larger than any valid
->cq_wait_nr, which is limited by IORING_MAX_CQ_ENTRIES, but further
have a good enough of space before it overflows.
Fixes: 8751d15426 ("io_uring: reduce scheduling due to tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/108b971e958deaf7048342930c341ba90f75d806.1705438669.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=5v/U
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/io_uring-2024-01-08' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Mostly just come fixes and cleanups, but one feature as well. In
detail:
- Harden the check for handling IOPOLL based on return (Pavel)
- Various minor optimizations (Pavel)
- Drop remnants of SCM_RIGHTS fd passing support, now that it's no
longer supported since 6.7 (me)
- Fix for a case where bytes_done wasn't initialized properly on a
failure condition for read/write requests (me)
- Move the register related code to a separate file (me)
- Add support for returning the provided ring buffer head (me)
- Add support for adding a direct descriptor to the normal file table
(me, Christian Brauner)
- Fix for ensuring pending task_work for a ring with DEFER_TASKRUN is
run even if we timeout waiting (me)"
* tag 'for-6.8/io_uring-2024-01-08' of git://git.kernel.dk/linux:
io_uring: ensure local task_work is run on wait timeout
io_uring/kbuf: add method for returning provided buffer ring head
io_uring/rw: ensure io->bytes_done is always initialized
io_uring: drop any code related to SCM_RIGHTS
io_uring/unix: drop usage of io_uring socket
io_uring/register: move io_uring_register(2) related code to register.c
io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL
io_uring/cmd: inline io_uring_cmd_get_task
io_uring/cmd: inline io_uring_cmd_do_in_task_lazy
io_uring: split out cmd api into a separate header
io_uring: optimise ltimeout for inline execution
io_uring: don't check iopoll if request completes
For the normal read/write path, we have already locked the ring
submission side when assigning the file. This causes branch
mispredictions when we then check and try and lock again in
io_req_set_rsrc_node(). As this is a very hot path, this matters.
Add a basic helper that already assumes we already have it locked,
and use that in io_file_get_fixed().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUxRQAKCRCRxhvAZXjc
ov/QAQDzvge3oQ9MEymmOiyzzcF+HhAXBr+9oEsYJjFc1p0TsgEA61gXjZo7F1jY
KBqd6znOZCR+Waj0kIVJRAo/ISRBqQc=
=0bRl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
A previous commit added an earlier break condition here, which is fine if
we're using non-local task_work as it'll be run on return to userspace.
However, if DEFER_TASKRUN is used, then we could be leaving local
task_work that is ready to process in the ctx list until next time that
we enter the kernel to wait for events.
Move the break condition to _after_ we have run task_work.
Cc: stable@vger.kernel.org
Fixes: 846072f16e ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we no longer allow sending io_uring fds over SCM_RIGHTS, move to
using io_is_uring_fops() to detect whether this is a io_uring fd or not.
With that done, kill off io_uring_get_socket() as nobody calls it
anymore.
This is in preparation to yanking out the rest of the core related to
unix gc with io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of this code is basically self contained, move it out of the core
io_uring file to bring a bit more separation to the registration related
bits. This moves another ~10% of the code into register.c.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
linux/io_uring.h is slowly becoming a rubbish bin where we put
anything exposed to other subsystems. For instance, the task exit
hooks and io_uring cmd infra are completely orthogonal and don't need
each other's definitions. Start cleaning it up by splitting out all
command bits into a new header file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ec50bae6e21f371d3850796e716917fc141225a.1701391955.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At one point in time we had an optimisation that would not spin up a
linked timeout timer when the master request successfully completes
inline (during the first nowait execution attempt). We somehow lost it,
so this patch restores it back.
Note, that it's fine using io_arm_ltimeout() after the io_issue_sqe()
completes the request because of delayed completion, but that that adds
unwanted overhead.
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8bf69c2a4beec14c565c85c86edb871ca8b8bcc8.1701390926.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOPOLL request should never return IOU_OK, so the following iopoll
queueing check in io_issue_sqe() after getting IOU_OK doesn't make any
sense as would never turn true. Let's optimise on that and return a bit
earlier. It's also much more resilient to potential bugs from
mischieving iopoll implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f8690e2fa5213a2ff292fac29a7143c036cdd60.1701390926.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Callers of mutex_unlock() have to make sure that the mutex stays alive
for the whole duration of the function call. For io_uring that means
that the following pattern is not valid unless we ensure that the
context outlives the mutex_unlock() call.
mutex_lock(&ctx->uring_lock);
req_put(req); // typically via io_req_task_submit()
mutex_unlock(&ctx->uring_lock);
Most contexts are fine: io-wq pins requests, syscalls hold the file,
task works are taking ctx references and so on. However, the task work
fallback path doesn't follow the rule.
Cc: <stable@vger.kernel.org>
Fixes: 04fc6c802d ("io_uring: save ctx put/get for task_work submit")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/CAG48ez3xSoYb+45f1RLtktROJrpiDQ1otNvdR+YLQf7m+Krj5Q@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally within a syscall it's fine to use fdget/fdput for grabbing a
file from the file table, and it's fine within io_uring as well. We do
that via io_uring_enter(2), io_uring_register(2), and then also for
cancel which is invoked from the latter. io_uring cannot close its own
file descriptors as that is explicitly rejected, and for the cancel
side of things, the file itself is just used as a lookup cookie.
However, it is more prudent to ensure that full references are always
grabbed. For anything threaded, either explicitly in the application
itself or through use of the io-wq worker threads, this is what happens
anyway. Generalize it and use fget/fput throughout.
Also see the below link for more details.
Link: https://lore.kernel.org/io-uring/CAG48ez1htVSO3TqmrF8QcX2WFuYTRM-VZ_N10i-VZgbtg=NNqw@mail.gmail.com/
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mmap_lock nests under uring_lock out of necessity, as we may be doing
user copies with uring_lock held. However, for mmap of provided buffer
rings, we attempt to grab uring_lock with mmap_lock already held from
do_mmap(). This makes lockdep, rightfully, complain:
WARNING: possible circular locking dependency detected
6.7.0-rc1-00009-gff3337ebaf94-dirty #4438 Not tainted
------------------------------------------------------
buf-ring.t/442 is trying to acquire lock:
ffff00020e1480a8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_uring_validate_mmap_request.isra.0+0x4c/0x140
but task is already holding lock:
ffff0000dc226190 (&mm->mmap_lock){++++}-{3:3}, at: vm_mmap_pgoff+0x124/0x264
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_lock){++++}-{3:3}:
__might_fault+0x90/0xbc
io_register_pbuf_ring+0x94/0x488
__arm64_sys_io_uring_register+0x8dc/0x1318
invoke_syscall+0x5c/0x17c
el0_svc_common.constprop.0+0x108/0x130
do_el0_svc+0x2c/0x38
el0_svc+0x4c/0x94
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
-> #0 (&ctx->uring_lock){+.+.}-{3:3}:
__lock_acquire+0x19a0/0x2d14
lock_acquire+0x2e0/0x44c
__mutex_lock+0x118/0x564
mutex_lock_nested+0x20/0x28
io_uring_validate_mmap_request.isra.0+0x4c/0x140
io_uring_mmu_get_unmapped_area+0x3c/0x98
get_unmapped_area+0xa4/0x158
do_mmap+0xec/0x5b4
vm_mmap_pgoff+0x158/0x264
ksys_mmap_pgoff+0x1d4/0x254
__arm64_sys_mmap+0x80/0x9c
invoke_syscall+0x5c/0x17c
el0_svc_common.constprop.0+0x108/0x130
do_el0_svc+0x2c/0x38
el0_svc+0x4c/0x94
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
From that mmap(2) path, we really just need to ensure that the buffer
list doesn't go away from underneath us. For the lower indexed entries,
they never go away until the ring is freed and we can always sanely
reference those as long as the caller has a file reference. For the
higher indexed ones in our xarray, we just need to ensure that the
buffer list remains valid while we return the address of it.
Free the higher indexed io_buffer_list entries via RCU. With that we can
avoid needing ->uring_lock inside mmap(2), and simply hold the RCU read
lock around the buffer list lookup and address check.
To ensure that the arrayed lookup either returns a valid fully formulated
entry via RCU lookup, add an 'is_ready' flag that we access with store
and release memory ordering. This isn't needed for the xarray lookups,
but doesn't hurt either. Since this isn't a fast path, retain it across
both types. Similarly, for the allocated array inside the ctx, ensure
we use the proper load/acquire as setup could in theory be running in
parallel with mmap.
While in there, add a few lockdep checks for documentation purposes.
Cc: stable@vger.kernel.org
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a provided buffer ring is setup with IOU_PBUF_RING_MMAP, then the
kernel allocates the memory for it and the application is expected to
mmap(2) this memory. However, io_uring uses remap_pfn_range() for this
operation, so we cannot rely on normal munmap/release on freeing them
for us.
Stash an io_buf_free entry away for each of these, if any, and provide
a helper to free them post ->release().
Cc: stable@vger.kernel.org
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The eventfd_signal_mask() helper was introduced for io_uring and similar
to eventfd_signal() it always passed 1 for @n. So don't bother with that
argument at all.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-3-bd549b14ce0c@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This flag only applies to the SQ and CQ rings, it's perfectly valid
to use a mmap approach for the provided ring buffers. Move the
check into where it belongs.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqes_map() is used rather than io_mem_alloc(), if the application
passes in memory for mapping rather than have the kernel allocate it and
then mmap(2) the ranges. This then calls __io_uaddr_map() to perform the
page mapping and pinning, which checks if we end up with the same pages,
if more than one page is mapped. But this check is incorrect and only
checks if the first and last pages are the same, where it really should
be checking if the mapped pages are contigous. This allows mapping a
single normal page, or a huge page range.
Down the line we can add support for remapping pages to be virtually
contigous, which is really all that io_uring cares about.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU").
The fixup will be done as part of the merge commit, and most of the text
above will become the commit message for the merge.
Pending post-merge work includes:
- hugepage support
- looking into using the restrictedmem framework for guest memory
- introducing a testing mechanism to poison memory, possibly using
the same memory attributes introduced here
- SNP and TDX support
There are two non-KVM patches buried in the middle of this series:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
The call to the inode_init_security_anon() LSM hook is not the sole
reason to use anon_inode_getfile_secure() or anon_inode_getfd_secure().
For example, the functions also allow one to create a file with non-zero
size, without needing a full-blown filesystem. In this case, you don't
need a "secure" version, just unique inodes; the current name of the
functions is confusing and does not explain well the difference with
the more "standard" anon_inode_getfile() and anon_inode_getfd().
Of course, there is another side of the coin; neither io_uring nor
userfaultfd strictly speaking need distinct inodes, and it is not
that clear anymore that anon_inode_create_get{file,fd}() allow the LSM
to intercept and block the inode's creation. If one was so inclined,
anon_inode_getfile_secure() and anon_inode_getfd_secure() could be kept,
using the shared inode or a new one depending on CONFIG_SECURITY.
However, this is probably overkill, and potentially a cause of bugs in
different configurations. Therefore, just add a comment to io_uring
and userfaultfd explaining the choice of the function.
While at it, remove the export for what is now anon_inode_create_getfd().
There is no in-tree module that uses it, and the old name is gone anyway.
If anybody actually needs the symbol, they can ask or they can just use
anon_inode_create_getfile(), which will be exported very soon for use
in KVM.
Suggested-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Z0L0
-----END PGP SIGNATURE-----
Merge tag 'io_uring-futex-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring futex support from Jens Axboe:
"This adds support for using futexes through io_uring - first futex
wake and wait, and then the vectored variant of waiting, futex waitv.
For both wait/wake/waitv, we support the bitset variant, as the
'normal' variants can be easily implemented on top of that.
PI and requeue are not supported through io_uring, just the above
mentioned parts. This may change in the future, but in the spirit of
keeping this small (and based on what people have been asking for),
this is what we currently have.
Wake support is pretty straight forward, most of the thought has gone
into the wait side to avoid needing to offload wait operations to a
blocking context. Instead, we rely on the usual callbacks to retry and
post a completion event, when appropriate.
As far as I can recall, the first request for futex support with
io_uring came from Andres Freund, working on postgres. His aio rework
of postgres was one of the early adopters of io_uring, and futex
support was a natural extension for that. This is relevant from both a
usability point of view, as well as for effiency and performance. In
Andres's words, for the former:
Futex wait support in io_uring makes it a lot easier to avoid
deadlocks in concurrent programs that have their own buffer pool:
Obviously pages in the application buffer pool have to be locked
during IO. If the initiator of IO A needs to wait for a held lock
B, the holder of lock B might wait for the IO A to complete. The
ability to wait for a lock and IO completions at the same time
provides an efficient way to avoid such deadlocks
and in terms of effiency, even without unlocking the full potential
yet, Andres says:
Futex wake support in io_uring is useful because it allows for more
efficient directed wakeups. For some "locks" postgres has queues
implemented in userspace, with wakeup logic that cannot easily be
implemented with FUTEX_WAKE_BITSET on a single "futex word"
(imagine waiting for journal flushes to have completed up to a
certain point).
Thus a "lock release" sometimes need to wake up many processes in a
row. A quick-and-dirty conversion to doing these wakeups via
io_uring lead to a 3% throughput increase, with 12% fewer context
switches, albeit in a fairly extreme workload"
* tag 'io_uring-futex-2023-10-30' of git://git.kernel.dk/linux:
io_uring: add support for vectored futex waits
futex: make the vectored futex operations available
futex: make futex_parse_waitv() available as a helper
futex: add wake_data to struct futex_q
io_uring: add support for futex wake and wait
futex: abstract out a __futex_wake_mark() helper
futex: factor out the futex wake handling
futex: move FUTEX2_VALID_MASK to futex.h
-----BEGIN PGP SIGNATURE-----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=okQ8
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"This contains the core io_uring updates, of which there are not many,
and adds support for using WAITID through io_uring and hence not
needing to block on these kinds of events.
Outside of that, tweaks to the legacy provided buffer handling and
some cleanups related to cancelations for uring_cmd support"
* tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux:
io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups
io_uring/kbuf: Use slab for struct io_buffer objects
io_uring/kbuf: Allow the full buffer id space for provided buffers
io_uring/kbuf: Fix check of BID wrapping in provided buffers
io_uring/rsrc: cleanup io_pin_pages()
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
If we specify a valid CQ ring address but an invalid SQ ring address,
we'll correctly spot this and free the allocated pages and clear them
to NULL. However, we don't clear the ring page count, and hence will
attempt to free the pages again. We've already cleared the address of
the page array when freeing them, but we don't check for that. This
causes the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Oops [#1]
Modules linked in:
CPU: 0 PID: 20 Comm: kworker/u2:1 Not tainted 6.6.0-rc5-dirty #56
Hardware name: ucbbar,riscvemu-bare (DT)
Workqueue: events_unbound io_ring_exit_work
epc : io_pages_free+0x2a/0x58
ra : io_rings_free+0x3a/0x50
epc : ffffffff808811a2 ra : ffffffff80881406 sp : ffff8f80000c3cd0
status: 0000000200000121 badaddr: 0000000000000000 cause: 000000000000000d
[<ffffffff808811a2>] io_pages_free+0x2a/0x58
[<ffffffff80881406>] io_rings_free+0x3a/0x50
[<ffffffff80882176>] io_ring_exit_work+0x37e/0x424
[<ffffffff80027234>] process_one_work+0x10c/0x1f4
[<ffffffff8002756e>] worker_thread+0x252/0x31c
[<ffffffff8002f5e4>] kthread+0xc4/0xe0
[<ffffffff8000332a>] ret_from_fork+0xa/0x1c
Check for a NULL array in io_pages_free(), but also clear the page counts
when we free them to be on the safer side.
Reported-by: rtm@csail.mit.edu
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The allocation of struct io_buffer for metadata of provided buffers is
done through a custom allocator that directly gets pages and
fragments them. But, slab would do just fine, as this is not a hot path
(in fact, it is a deprecated feature) and, by keeping a custom allocator
implementation we lose benefits like tracking, poisoning,
sanitizers. Finally, the custom code is more complex and requires
keeping the list of pages in struct ctx for no good reason. This patch
cleans this path up and just uses slab.
I microbenchmarked it by forcing the allocation of a large number of
objects with the least number of io_uring commands possible (keeping
nbufs=USHRT_MAX), with and without the patch. There is a slight
increase in time spent in the allocation with slab, of course, but even
when allocating to system resources exhaustion, which is not very
realistic and happened around 1/2 billion provided buffers for me, it
wasn't a significant hit in system time. Specially if we think of a
real-world scenario, an application doing register/unregister of
provided buffers will hit ctx->io_buffers_cache more often than actually
going to slab.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231005000531.30800-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On at least arm32, but presumably any arch with highmem, if the
application passes in memory that resides in highmem for the rings,
then we should fail that ring creation. We fail it with -EINVAL, which
is what kernels that don't support IORING_SETUP_NO_MMAP will do as well.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for FUTEX_WAKE/WAIT primitives.
IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as
it does support passing in a bitset.
Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and
FUTEX_WAIT_BITSET.
For both of them, they are using the futex2 interface.
FUTEX_WAKE is straight forward, as those can always be done directly from
the io_uring submission without needing async handling. For FUTEX_WAIT,
things are a bit more complicated. If the futex isn't ready, then we
rely on a callback via futex_queue->wake() when someone wakes up the
futex. From that calback, we queue up task_work with the original task,
which will post a CQE and wake it, if necessary.
Cancelations are supported, both from the application point-of-view,
but also to be able to cancel pending waits if the ring exits before
all events have occurred. The return value of futex_unqueue() is used
to gate who wins the potential race between cancelation and futex
wakeups. Whomever gets a 'ret == 1' return from that claims ownership
of the io_uring futex request.
This is just the barebones wait/wake support. PI or REQUEUE support is
not added at this point, unclear if we might look into that later.
Likewise, explicit timeouts are not supported either. It is expected
that users that need timeouts would do so via the usual io_uring
mechanism to do that using linked timeouts.
The SQE format is as follows:
`addr` Address of futex
`fd` futex2(2) FUTEX2_* flags
`futex_flags` io_uring specific command flags. None valid now.
`addr2` Value of futex
`addr3` Mask to wake/wait
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
uring_cmd may never complete, such as ublk, in which uring cmd isn't
completed until one new block request is coming from ublk block device.
Add cancelable uring_cmd to provide mechanism to driver for cancelling
pending commands in its own way.
Add API of io_uring_cmd_mark_cancelable() for driver to mark one command as
cancelable, then io_uring will cancel this command in
io_uring_cancel_generic(). ->uring_cmd() callback is reused for canceling
command in driver's way, then driver gets notified with the cancelling
from io_uring.
Add API of io_uring_cmd_get_task() to help driver cancel handler
deal with the canceling.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Retain top 8bits of uring_cmd flags for kernel internal use, so that we
can move IORING_URING_CMD_POLLED out of uapi header.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for an async version of waitid(2), in a fully async
version. If an event isn't immediately available, wait for a callback
to trigger a retry.
The format of the sqe is as follows:
sqe->len The 'which', the idtype being queried/waited for.
sqe->fd The 'pid' (or id) being waited for.
sqe->file_index The 'options' being set.
sqe->addr2 A pointer to siginfo_t, if any, being filled in.
buf_index, add3, and waitid_flags are reserved/unused for now.
waitid_flags will be used for options for this request type. One
interesting use case may be to add multi-shot support, so that the
request stays armed and posts a notification every time a monitored
process state change occurs.
Note that this does not support rusage, on Arnd's recommendation.
See the waitid(2) man page for details on the arguments.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit b484a40dc1.
This commit cancels all requests with io-wq, not just the ones from the
originating task. This breaks use cases that have thread pools, or just
multiple tasks issuing requests on the same ring. The liburing
regression test for this also shows that problem:
$ test/thread-exit.t
cqe->res=-125, Expected 512
where an IO thread gets its request canceled rather than complete
successfully.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq will retry iopoll even when it failed with -EAGAIN. If that
races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers,
such workers might potentially infinitely spin retrying iopoll again and
again and each time failing on some allocation / waiting / etc. Don't
keep spinning if io-wq is dying.
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a new sysctl (io_uring_disabled) which can be either 0, 1, or
2. When 0 (the default), all processes are allowed to create io_uring
instances, which is the current behavior. When 1, io_uring creation is
disabled (io_uring_setup() will fail with -EPERM) for unprivileged
processes not in the kernel.io_uring_group group. When 2, calls to
io_uring_setup() fail with -EPERM regardless of privilege.
Signed-off-by: Matteo Rizzo <matteorizzo@google.com>
[JEM: modified to add io_uring_group]
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/x49y1i42j1z.fsf@segfault.boston.devel.redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_wq_put_and_exit() is called from do_exit(), but all FIXED_FILE requests
in io_wq aren't canceled in io_uring_cancel_generic() called from do_exit().
Meantime io_wq IO code path may share resource with normal iopoll code
path.
So if any HIPRI request is submittd via io_wq, this request may not get resouce
for moving on, given iopoll isn't possible in io_wq_put_and_exit().
The issue can be triggered when terminating 't/io_uring -n4 /dev/nullb0'
with default null_blk parameters.
Fix it by always cancelling all requests in io_wq by adding helper of
io_uring_cancel_wq(), and this way is reasonable because io_wq destroying
follows canceling requests immediately.
Closes: https://lore.kernel.org/linux-block/3893581.1691785261@warthog.procyon.org.uk/
Reported-by: David Howells <dhowells@redhat.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230901134916.2415386-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=XS+G
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Fairly quiet round in terms of features, mostly just improvements all
over the map for existing code. In detail:
- Initial support for socket operations through io_uring. Latter half
of this will likely land with the 6.7 kernel, then allowing things
like get/setsockopt (Breno)
- Cleanup of the cancel code, and then adding support for canceling
requests with the opcode as the key (me)
- Improvements for the io-wq locking (me)
- Fix affinity setting for SQPOLL based io-wq (me)
- Remove the io_uring userspace code. These were added initially as
copies from liburing, but all of them have since bitrotted and are
way out of date at this point. Rather than attempt to keep them in
sync, just get rid of them. People will have liburing available
anyway for these examples. (Pavel)
- Series improving the CQ/SQ ring caching (Pavel)
- Misc fixes and cleanups (Pavel, Yue, me)"
* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
io_uring: move iopoll ctx fields around
io_uring: move multishot cqe cache in ctx
io_uring: separate task_work/waiting cache line
io_uring: banish non-hot data to end of io_ring_ctx
io_uring: move non aligned field to the end
io_uring: add option to remove SQ indirection
io_uring: compact SQ/CQ heads/tails
io_uring: force inline io_fill_cqe_req
io_uring: merge iopoll and normal completion paths
io_uring: reorder cqring_flush and wakeups
io_uring: optimise extra io_get_cqe null check
io_uring: refactor __io_get_cqe()
io_uring: simplify big_cqe handling
io_uring: cqe init hardening
io_uring: improve cqe !tracing hot path
io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
io_uring: simplify io_run_task_work_sig return
io_uring/rsrc: keep one global dummy_ubuf
io_uring: never overflow io_aux_cqe
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
We cache multishot CQEs before flushing them to the CQ in
submit_state.cqe. It's a 16 entry cache totalling 256 bytes in the
middle of the io_submit_state structure. Move it out of there, it
should help with CPU caches for the submission state, and shouldn't
affect cached CQEs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dbe1f39c043ee23da918836be44fcec252ce6711.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not many aware, but io_uring submission queue has two levels. The first
level usually appears as sq_array and stores indexes into the actual SQ.
To my knowledge, no one has ever seriously used it, nor liburing exposes
it to users. Add IORING_SETUP_NO_SQARRAY, when set we don't bother
creating and using the sq_array and SQ heads/tails will be pointing
directly into the SQ. Improves memory footprint, in term of both
allocations as well as cache usage, and also should make io_get_sqe()
less branchy in the end.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0ffa3268a5ef61d326201ff43a233315c96312e0.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_do_iopoll() and io_submit_flush_completions() are pretty similar,
both filling CQEs and then free a list of requests. Don't duplicate it
and make iopoll use __io_submit_flush_completions(), which also helps
with inlining and other optimisations.
For that, we need to first find all completed iopoll requests and splice
them from the iopoll list and then pass it down. This adds one extra
list traversal, which should be fine as requests will stay hot in cache.
CQ locking is already conditional, introduce ->lockless_cq and skip
locking for IOPOLL as it's protected by ->uring_lock.
We also add a wakeup optimisation for IOPOLL to __io_cq_unlock_post(),
so it works just like io_cqring_ev_posted_iopoll().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3840473f5e8a960de35b77292026691880f6bdbc.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unlike in the past, io_commit_cqring_flush() doesn't do anything that
may need io_cqring_wake() to be issued after, all requests it completes
will go via task_work. Do io_commit_cqring_flush() after
io_cqring_wake() to clean up __io_cq_unlock_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ed32dcfeec47e6c97bd6b18c152ddce5b218403f.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the cached cqe check passes in io_get_cqe*() it already means that
the cqe we return is valid and non-zero, however the compiler is unable
to optimise null checks like in io_fill_cqe_req().
Do a bit of trickery, return success/fail boolean from io_get_cqe*()
and store cqe in the cqe parameter. That makes it do the right thing,
erasing the check together with the introduced indirection.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/322ea4d3377d3d4efd8ae90ab8ed28a99f518210.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_kiocb::cqe stores the completion info which we'll memcpy to
userspace, and we rely on callbacks and other later steps to populate
it with right values. We have never had problems with that, but it would
still be safer to zero it on allocation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b16a3b64dde678686460d3c3792c3ba6d3d1bc7a.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Patch series "Remove _folio_dtor and _folio_order", v2.
This patch (of 13):
folio_put() is the standard way to write this, and it's not appreciably
slower. This is an enabling patch for removing free_compound_page()
entirely.
Link: https://lkml.kernel.org/r/20230816151201.3655946-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230816151201.3655946-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If we setup the ring with SQPOLL, then that polling thread has its
own io-wq setup. This means that if the application uses
IORING_REGISTER_IOWQ_AFF to set the io-wq affinity, we should not be
setting it for the invoking task, but rather the sqpoll task.
Add an sqpoll helper that parks the thread and updates the affinity,
and use that one if we're using SQPOLL.
Fixes: fe76421d1d ("io_uring: allow user configurable IO thread CPU affinity")
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/884
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We set empty registered buffers to dummy_ubuf as an optimisation.
Currently, we allocate the dummy entry for each ring, whenever we can
simply have one global instance.
We're casting out const on assignment, it's fine as we're not going to
change the content of the dummy, the constness gives us an extra layer
of protection if sth ever goes wrong.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e4a96dda35ab755914bc43f6781bba0df97ac489.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
