The b_strat callback is used by xfs_buf_iostrategy to perform additional
checks before submitting a buffer. It is used in xfs_bwrite and when
writing out delayed buffers. In xfs_bwrite it we can de-virtualize the
call easily as b_strat is set a few lines above the call to
xfs_buf_iostrategy. For the delayed buffers the rationale is a bit
more complicated:
- there are three callers of xfs_buf_delwri_queue, which places buffers
on the delwri list:
(1) xfs_bdwrite - this sets up b_strat, so it's fine
(2) xfs_buf_iorequest. None of the callers can have XBF_DELWRI set:
- xlog_bdstrat is only used for log buffers, which are never delwri
- _xfs_buf_read explicitly clears the delwri flag
- xfs_buf_iodone_work retries log buffers only
- xfsbdstrat - only used for reads, superblock writes without the
delwri flag, log I/O and file zeroing with explicitly allocated
buffers.
- xfs_buf_iostrategy - only calls xfs_buf_iorequest if b_strat is
not set
(3) xfs_buf_unlock
- only puts the buffer on the delwri list if the DELWRI flag is
already set. The DELWRI flag is only ever set in xfs_bwrite,
xfs_buf_iodone_callbacks, or xfs_trans_log_buf. For
xfs_buf_iodone_callbacks and xfs_trans_log_buf we require
an initialized buf item, which means b_strat was set to
xfs_bdstrat_cb in xfs_buf_item_init.
Conclusion: we can just get rid of the callback and replace it with
explicit calls to xfs_bdstrat_cb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since Linux 2.6.33 the kernel has support for real O_SYNC, which made
the osyncisosync option a no-op. Warn the users about this and remove
the mount flag for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When CONFIG_XFS_POSIX_ACL is not set "xfs_check_acl" is #defined
to NULL - which breaks the code attempting to add a tracepoint
on this function.
Only define the tracepoint when the function exists.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Avoid a lockdep warning by preventing page cache allocation from
recursing back into the filesystem during memory reclaim.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_ireclaim has to get and put te pag structure because it is only
called with the inode to reclaim. The one caller of this function
already has a reference on the pag and a pointer to is, so move the
radix tree delete to the caller and remove xfs_ireclaim completely.
This avoids a xfs_perag_get/put on every inode being reclaimed.
The overhead was noticed in a bug report at:
https://bugzilla.kernel.org/show_bug.cgi?id=16348
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_buf_read() fails to detect dispatch errors before attempting to
wait on sychronous IO. If there was an error, it will get stuck
forever, waiting for an I/O that was never started. Make sure the
error is detected correctly.
Further, such a failure can leave locked pages in the page cache
which will cause a later operation to hang on the page. Ensure that
we correctly process pages in the buffers when we get a dispatch
error.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
I missed Dave Chinner's second revision of this change, and pushed
his first version out to the repository instead.
commit a476c59ebb279d738718edc0e3fb76aab3687114
Author: Dave Chinner <dchinner@redhat.com>
This commit compensates for that by moving a block of code up a bit
further, with a result that matches the the effect of Dave's second
version.
Dave's first version was:
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Dave's second version was:
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
The open_exec file operation is only added by the external dmapi
patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
These days we always have buffers thanks to ->page_mkwrite. And we
already have an assert a few lines above tripping in case that was
not true due to a bug.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently we don't remove the XFS mount from the shrinker list until
late in the unmount path. By this time, we have already torn down
the internals of the filesystem (e.g. the per-ag structures), and
hence if the shrinker is executed between the teardown and the
unregistering, the shrinker will get NULL per-ag structure pointers
and panic trying to dereference them.
Fix this by removing the xfs mount from the shrinker list before
tearing down it's internal structures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Replace the xfs_itrace_entry catchall with specific trace points. For
most simple callers we now use the simple inode class, which used to
be the iget class, but add more details tracing for namespace events,
which now includes the name of the directory entries manipulated.
Remove the xfs_inactive trace point, which is a duplicate of the clear_inode
one, and the xfs_change_file_space trace point, which is immediately
followed by the more specific alloc/free space trace points.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We never get an i_mode of 0 or a locked VFS inode until we pass in the
XFS_IGET_CREATE flag to xfs_iget, which makes xfs_iput_new equivalent to
xfs_iput for the only caller. In addition to that xfs_nfs_get_inode
does not even need to lock the inode given that the generation never changes
for a life inode, so just pass a 0 lock_flags to xfs_iget and release
the inode using IRELE in the error path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The xfs_iget_alloc/found tracepoints are a bit misnamed and misplaced.
Rename them to xfs_iget_hit/xfs_iget_miss and move them to the beggining
of the xfs_iget_cache_hit/miss functions. Add a new xfs_iget_reclaim_fail
tracepoint for the case where we fail to re-initialize a VFS inode,
and add a second instance of the xfs_iget_skip tracepoint for the case
of a failed igrab() call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The tracing code can't print flags defined as enums. Most flags that
we want to print are defines as macros already, but move the few remaining
ones over to make the trace output more useful.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
On the final put of a superblock the VFS already calls sync_filesystem
for us to write out all data and wait for it. No need to start another
asynchronous writeback inside ->put_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove the flags argument to __xfs_get_blocks as we can easily derive
it from the direct argument, and remove the unused BMAPI_MMAP flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We already rely on the fact that the sync code will cause a synchronous
log force later on (currently via xfs_fs_sync_fs -> xfs_quiesce_data ->
xfs_sync_data), so no need to do this here. This allows us to avoid
a lot of synchronous log forces during sync, which pays of especially
with delayed logging enabled. Some compilebench numbers that show
this:
xfs (delayed logging, 256k logbufs)
===================================
intial create 25.94 MB/s 25.75 MB/s 25.64 MB/s
create 8.54 MB/s 9.12 MB/s 9.15 MB/s
patch 2.47 MB/s 2.47 MB/s 3.17 MB/s
compile 29.65 MB/s 30.51 MB/s 27.33 MB/s
clean 90.92 MB/s 98.83 MB/s 128.87 MB/s
read tree 11.90 MB/s 11.84 MB/s 8.56 MB/s
read compiled 28.75 MB/s 29.96 MB/s 24.25 MB/s
delete tree 8.39 seconds 8.12 seconds 8.46 seconds
delete compiled 8.35 seconds 8.44 seconds 5.11 seconds
stat tree 6.03 seconds 5.59 seconds 5.19 seconds
stat compiled tree 9.00 seconds 9.52 seconds 8.49 seconds
xfs + write_inode log_force removal
===================================
intial create 25.87 MB/s 25.76 MB/s 25.87 MB/s
create 15.18 MB/s 14.80 MB/s 14.94 MB/s
patch 3.13 MB/s 3.14 MB/s 3.11 MB/s
compile 36.74 MB/s 37.17 MB/s 36.84 MB/s
clean 226.02 MB/s 222.58 MB/s 217.94 MB/s
read tree 15.14 MB/s 15.02 MB/s 15.14 MB/s
read compiled tree 29.30 MB/s 29.31 MB/s 29.32 MB/s
delete tree 6.22 seconds 6.14 seconds 6.15 seconds
delete compiled tree 5.75 seconds 5.92 seconds 5.81 seconds
stat tree 4.60 seconds 4.51 seconds 4.56 seconds
stat compiled tree 4.07 seconds 3.87 seconds 3.96 seconds
In addition to that also remove the delwri inode flush that is unessecary
now that bulkstat is always coherent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The writepage implementation in XFS still tries to deal with dirty but
unmapped buffers which used to caused by writes through shared mmaps. Since
the introduction of ->page_mkwrite these can't happen anymore, so remove the
code dealing with them.
Note that the all_bh variable which causes us to start I/O on all buffers on
the pages was controlled by the count of unmapped buffers, which also
included those not actually dirty. It's now unconditionally initialized to
0 but set to 1 for the case of small file size extensions. It probably can
be removed entirely, but that's left for another patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Currently the xfs releasepage implementation has code to deal with converting
delayed allocated and unwritten space. But we never get called for those as
we always convert delayed and unwritten space when cleaning a page, or drop
the state from the buffers in block_invalidatepage. We still keep a WARN_ON
on those cases for now, but remove all the case dealing with it, which allows
to fold xfs_page_state_convert into xfs_vm_writepage and remove the !startio
case from the whole writeback path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfstests 194 first truncats a file back and then extends it again by
truncating it to a larger size. This causes discard_buffer to drop
the mapped, but not the uptodate bit and thus creates something that
xfs_page_state_convert takes for unmapped space created by mmap because
it doesn't check for the dirty bit, which also gets cleared by
discard_buffer and checked by other ->writepage implementations like
block_write_full_page. Handle this kind of buffers early, and unlike
Eric's first version of the patch simply ASSERT that the buffers is
dirty, given that the mmap write case can't happen anymore since the
introduction of ->page_mkwrite. The now dead code dealing with that
will be deleted in a follow on patch.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
This code was introduced four years ago in commit
3e57ecf640 without any review and has
been unused since. Remove it just as the rest of the code introduced
in that commit to reduce that stack usage and complexity in this central
piece of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Currently we need to either call IHOLD or xfs_trans_ihold on an inode when
joining it to a transaction via xfs_trans_ijoin.
This patches instead makes xfs_trans_ijoin usable on it's own by doing
an implicity xfs_trans_ihold, which also allows us to drop the third
argument. For the case where we want to hold a reference on the inode
a xfs_trans_ijoin_ref wrapper is added which does the IHOLD and marks
the inode for needing an xfs_iput. In addition to the cleaner interface
to the caller this also simplifies the implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Get rid of the xfs_buf_pin/xfs_buf_unpin/xfs_buf_ispin helpers and opencode
them in their only callers, just like we did for the inode pinning a while
ago. Also remove duplicate trace points - the bufitem tracepoints cover
all the information that is present in a buffer tracepoint.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Currently we track log item descriptor belonging to a transaction using a
complex opencoded chunk allocator. This code has been there since day one
and seems to work around the lack of an efficient slab allocator.
This patch replaces it with dynamically allocated log item descriptors
from a dedicated slab pool, linked to the transaction by a linked list.
This allows to greatly simplify the log item descriptor tracking to the
point where it's just a couple hundred lines in xfs_trans.c instead of
a separate file. The external API has also been simplified while we're
at it - the xfs_trans_add_item and xfs_trans_del_item functions to add/
delete items from a transaction have been simplified to the bare minium,
and the xfs_trans_find_item function is replaced with a direct dereference
of the li_desc field. All debug code walking the list of log items in
a transaction is down to a simple list_for_each_entry.
Note that we could easily use a singly linked list here instead of the
double linked list from list.h as the fastpath only does deletion from
sequential traversal. But given that we don't have one available as
a library function yet I use the list.h functions for simplicity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.
This patch drops over 700 lines of dmapi overhead. If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Almost all identifiers use the FS_* namespace, so rename the missing few
XFS_* ones to FS_* as well. Without this some people might get upset
about having too many XFS names in generic code.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
https://bugzilla.kernel.org/show_bug.cgi?id=16348
When the filesystem grows to a large number of allocation groups,
the summing of recalimable inodes gets expensive. In many cases,
most AGs won't have any reclaimable inodes and so we are wasting CPU
time aggregating over these AGs. This is particularly important for
the inode shrinker that gets called frequently under memory
pressure.
To avoid the overhead, track AGs with reclaimable inodes in the
per-ag radix tree so that we can find all the AGs with reclaimable
inodes via a simple gang tag lookup. This involves setting the tag
when the first reclaimable inode is tracked in the AG, and removing
the tag when the last reclaimable inode is removed from the tree.
Then the summation process becomes a loop walking the radix tree
summing AGs with the reclaim tag set.
This significantly reduces the overhead of scanning - a 6400 AG
filesystea now only uses about 25% of a cpu in kswapd while slab
reclaim progresses instead of being permanently stuck at 100% CPU
and making little progress. Clean filesystems filesystems will see
no overhead and the overhead only increases linearly with the number
of dirty AGs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now the shrinker passes us a context, wire up a shrinker context per
filesystem. This allows us to remove the global mount list and the
locking problems that introduced. It also means that a shrinker call
does not need to traverse clean filesystems before finding a
filesystem with reclaimable inodes. This significantly reduces
scanning overhead when lots of filesystems are present.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The current shrinker implementation requires the registered callback
to have global state to work from. This makes it difficult to shrink
caches that are not global (e.g. per-filesystem caches). Pass the shrinker
structure to the callback so that users can embed the shrinker structure
in the context the shrinker needs to operate on and get back to it in the
callback via container_of().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The block number comes from bulkstat based inode lookups to shortcut
the mapping calculations. We ar enot able to trust anything from
bulkstat, so drop the block number as well so that the correct
lookups and mappings are always done.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Inode numbers may come from somewhere external to the filesystem
(e.g. file handles, bulkstat information) and so are inherently
untrusted. Rename the flag we use for these lookups to make it
obvious we are doing a lookup of an untrusted inode number and need
to verify it completely before trying to read it from disk.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The non-coherent bulkstat versionsthat look directly at the inode
buffers causes various problems with performance optimizations that
make increased use of just logging inodes. This patch makes bulkstat
always use iget, which should be fast enough for normal use with the
radix-tree based inode cache introduced a while ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that the background flush code has been fixed, we shouldn't need to
silently multiply the wbc->nr_to_write to get good writeback. Remove
that code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allowing writeback from reclaim context causes massive problems with stack
overflows as we can call into the writeback code which tends to be a heavy
stack user both in the generic code and XFS from random contexts that
perform memory allocations.
Follow the example of btrfs (and in slightly different form ext4) and refuse
to write out data from reclaim context. This issue should really be handled
by the VM so that we can tune better for this case, but until we get it
sorted out there we have to hack around this in each filesystem with a
complex writeback path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If a filesystem is mounted without the inode64 mount option we
should still be able to access inodes not fitting into 32 bits, just
not created new ones. For this to work we need to make sure the
inode cache radix tree is initialized for all allocation groups, not
just those we plan to allocate inodes from. This patch makes sure
we initialize the inode cache radix tree for all allocation groups,
and also cleans xfs_initialize_perag up a bit to separate the
inode32 logical from the general perag structure setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Use DECLARE_EVENT_CLASS, and save ~15K:
text data bss dec hex filename
171949 43028 48 215025 347f1 fs/xfs/linux-2.6/xfs_trace.o.orig
156521 43028 36 199585 30ba1 fs/xfs/linux-2.6/xfs_trace.o
No change in functionality.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alex Elder <aelder@sgi.com>
The new xfsqa test 228 tries to preallocate more space than the
filesystem contains. it should fail, but instead triggers an assert
about lock flags. The failure is due to the size extension failing
in vmtruncate() due to rlimit being set. Check this before we start
the preallocation to avoid allocating space that will never be used.
Also the path through xfs_vn_allocate already holds the IO lock, so
it should not be present in the lock flags when the setattr fails.
Hence the assert needs to take this into account. This will prevent
other such callers from hitting this incorrect ASSERT.
(Fixed a reference to "newsize" to read "new_size". -Alex)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The delayed logging code only changes in-memory structures and as
such can be enabled and disabled with a mount option. Add the mount
option and emit a warning that this is an experimental feature that
should not be used in production yet.
We also need infrastructure to track committed items that have not
yet been written to the log. This is what the Committed Item List
(CIL) is for.
The log item also needs to be extended to track the current log
vector, the associated memory buffer and it's location in the Commit
Item List. Extend the log item and log vector structures to enable
this tracking.
To maintain the current log format for transactions with delayed
logging, we need to introduce a checkpoint transaction and a context
for tracking each checkpoint from initiation to transaction
completion. This includes adding a log ticket for tracking space
log required/used by the context checkpoint.
To track all the changes we need an io vector array per log item,
rather than a single array for the entire transaction. Using the new
log vector structure for this requires two passes - the first to
allocate the log vector structures and chain them together, and the
second to fill them out. This log vector chain can then be passed
to the CIL for formatting, pinning and insertion into the CIL.
Formatting of the log vector chain is relatively simple - it's just
a loop over the iovecs on each log vector, but it is made slightly
more complex because we re-write the iovec after the copy to point
back at the memory buffer we just copied into.
This code also needs to pin log items. If the log item is not
already tracked in this checkpoint context, then it needs to be
pinned. Otherwise it is already pinned and we don't need to pin it
again.
The only other complexity is calculating the amount of new log space
the formatting has consumed. This needs to be accounted to the
transaction in progress, and the accounting is made more complex
becase we need also to steal space from it for log metadata in the
checkpoint transaction. Calculate all this at insert time and update
all the tickets, counters, etc correctly.
Once we've formatted all the log items in the transaction, attach
the busy extents to the checkpoint context so the busy extents live
until checkpoint completion and can be processed at that point in
time. Transactions can then be freed at this point in time.
Now we need to issue checkpoints - we are tracking the amount of log space
used by the items in the CIL, so we can trigger background checkpoints when the
space usage gets to a certain threshold. Otherwise, checkpoints need ot be
triggered when a log synchronisation point is reached - a log force event.
Because the log write code already handles chained log vectors, writing the
transaction is trivial, too. Construct a transaction header, add it
to the head of the chain and write it into the log, then issue a
commit record write. Then we can release the checkpoint log ticket
and attach the context to the log buffer so it can be called during
Io completion to complete the checkpoint.
We also need to allow for synchronising multiple in-flight
checkpoints. This is needed for two things - the first is to ensure
that checkpoint commit records appear in the log in the correct
sequence order (so they are replayed in the correct order). The
second is so that xfs_log_force_lsn() operates correctly and only
flushes and/or waits for the specific sequence it was provided with.
To do this we need a wait variable and a list tracking the
checkpoint commits in progress. We can walk this list and wait for
the checkpoints to change state or complete easily, an this provides
the necessary synchronisation for correct operation in both cases.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
When we free a metadata extent, we record it in the per-AG busy
extent array so that it is not re-used before the freeing
transaction hits the disk. This array is fixed size, so when it
overflows we make further allocation transactions synchronous
because we cannot track more freed extents until those transactions
hit the disk and are completed. Under heavy mixed allocation and
freeing workloads with large log buffers, we can overflow this array
quite easily.
Further, the array is sparsely populated, which means that inserts
need to search for a free slot, and array searches often have to
search many more slots that are actually used to check all the
busy extents. Quite inefficient, really.
To enable this aspect of extent freeing to scale better, we need
a structure that can grow dynamically. While in other areas of
XFS we have used radix trees, the extents being freed are at random
locations on disk so are better suited to being indexed by an rbtree.
So, use a per-AG rbtree indexed by block number to track busy
extents. This incures a memory allocation when marking an extent
busy, but should not occur too often in low memory situations. This
should scale to an arbitrary number of extents so should not be a
limitation for features such as in-memory aggregation of
transactions.
However, there are still situations where we can't avoid allocating
busy extents (such as allocation from the AGFL). To minimise the
overhead of such occurences, we need to avoid doing a synchronous
log force while holding the AGF locked to ensure that the previous
transactions are safely on disk before we use the extent. We can do
this by marking the transaction doing the allocation as synchronous
rather issuing a log force.
Because of the locking involved and the ordering of transactions,
the synchronous transaction provides the same guarantees as a
synchronous log force because it ensures that all the prior
transactions are already on disk when the synchronous transaction
hits the disk. i.e. it preserves the free->allocate order of the
extent correctly in recovery.
By doing this, we avoid holding the AGF locked while log writes are
in progress, hence reducing the length of time the lock is held and
therefore we increase the rate at which we can allocate and free
from the allocation group, thereby increasing overall throughput.
The only problem with this approach is that when a metadata buffer is
marked stale (e.g. a directory block is removed), then buffer remains
pinned and locked until the log goes to disk. The issue here is that
if that stale buffer is reallocated in a subsequent transaction, the
attempt to lock that buffer in the transaction will hang waiting
the log to go to disk to unlock and unpin the buffer. Hence if
someone tries to lock a pinned, stale, locked buffer we need to
push on the log to get it unlocked ASAP. Effectively we are trading
off a guaranteed log force for a much less common trigger for log
force to occur.
Ideally we should not reallocate busy extents. That is a much more
complex fix to the problem as it involves direct intervention in the
allocation btree searches in many places. This is left to a future
set of modifications.
Finally, now that we track busy extents in allocated memory, we
don't need the descriptors in the transaction structure to point to
them. We can replace the complex busy chunk infrastructure with a
simple linked list of busy extents. This allows us to remove a large
chunk of code, making the overall change a net reduction in code
size.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Clean up the buffer log format (XFS_BLI_*) flags because they have a
polluted namespace. They XFS_BLI_ prefix is used for both in-memory
and on-disk flag feilds, but have overlapping values for different
flags. Rename the buffer log format flags to use the XFS_BLF_*
prefix to avoid confusing them with the in-memory XFS_BLI_* prefixed
flags.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
get rid of home-grown mutex in cris eeprom.c
switch ecryptfs_write() to struct inode *, kill on-stack fake files
switch ecryptfs_get_locked_page() to struct inode *
simplify access to ecryptfs inodes in ->readpage() and friends
AFS: Don't put struct file on the stack
Ban ecryptfs over ecryptfs
logfs: replace inode uid,gid,mode initialization with helper function
ufs: replace inode uid,gid,mode initialization with helper function
udf: replace inode uid,gid,mode init with helper
ubifs: replace inode uid,gid,mode initialization with helper function
sysv: replace inode uid,gid,mode initialization with helper function
reiserfs: replace inode uid,gid,mode initialization with helper function
ramfs: replace inode uid,gid,mode initialization with helper function
omfs: replace inode uid,gid,mode initialization with helper function
bfs: replace inode uid,gid,mode initialization with helper function
ocfs2: replace inode uid,gid,mode initialization with helper function
nilfs2: replace inode uid,gid,mode initialization with helper function
minix: replace inode uid,gid,mode init with helper
ext4: replace inode uid,gid,mode init with helper
...
Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
Pass the larger struct fs_disk_quota to the ->set_dqblk operation so
that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->set_xquota
operation. The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.
Add new fieldmask values for setting the numer of blocks and inodes
values which is required for the VFS quota, but wasn't for XFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Pass the larger struct fs_disk_quota to the ->get_dqblk operation so
that the Q_GETQUOTA and Q_XGETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->get_xquota
operation. The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Rename all iomap_valid identifiers to imap_valid to fit the new
world order, and clean up xfs_iomap_valid to convert the passed in
offset to blocks instead of the imap values to bytes. Use the
simpler inode->i_blkbits instead of the XFS macros for this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The IOMAP_ flags are now only used inside xfs_aops.c for extent
probing and I/O completion tracking, so more them here, and rename
them to IO_* as there's no mapping involved at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now that struct xfs_iomap contains exactly the same units as struct
xfs_bmbt_irec we can just use the latter directly in the aops code.
Replace the missing IOMAP_NEW flag with a new boolean output
parameter to xfs_iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Report the iomap_bn field of struct xfs_iomap in terms of filesystem
blocks instead of in terms of bytes. Shift the byte conversions
into the caller, and replace the IOMAP_DELAY and IOMAP_HOLE flag
checks with checks for HOLESTARTBLOCK and DELAYSTARTBLOCK.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Report the iomap_offset and iomap_bsize fields of struct xfs_iomap
in terms of fsblocks instead of in terms of disk blocks. Shift the
byte conversions into the callers temporarily, but they will
disappear or get cleaned up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The iomap_delta field in struct xfs_iomap just contains the
difference between the offset passed to xfs_iomap and the
iomap_offset. Just calculate it in the only caller that cares.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Instead of using the iomap_target field in struct xfs_iomap
and the IOMAP_REALTIME flag just use the already existing
xfs_find_bdev_for_inode helper. There's some fallout as we
need to pass the inode in a few more places, which we also
use to sanitize some calling conventions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
According to Documentation/filesystems/fiemap.txt, If fm_extent_count
is zero, then the fm_extents[] array is ignored (no extents will be
returned), and the fm_mapped_extents count will hold the number of
extents needed.
But as the commit 97db39a1f6 has changed
bmv_count to the caller's input buffer, this number query function can't
work any more. As this commit is written to change bmv_count from
MAXEXTNUM because of ENOMEM.
This patch just try to set bm.bmv_count to something sane.
Thanks to Dave Chinner <david@fromorbit.com> for the suggestion.
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
We need to wait for all pending direct I/O requests before taking care of
metadata in fsync and write_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
fs/xfs/linux-2.6/xfs_trace.c: xfs_attr_sf.h is included more than once.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
xfs_bwrite is used with the intention of synchronously writing out
buffers, but currently it does not actually clear the async flag if
that's left from previous writes but instead implements async
behaviour if it finds it. Remove the code handling asynchronous
writes as we've got rid of those entirely outside of the log and
delwri buffers, and make sure that we clear the async and read flags
before writing the buffer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
All modifications to the superblock are done transactional through
xfs_trans_log_buf, so there is no reason to initiate periodic
asynchronous writeback. This only removes the superblock from the
delwri list and will lead to sub-optimal I/O scheduling.
Cut down xfs_sync_fsdata now that it's only used for synchronous
superblock writes and move the log coverage checks into the two
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Convert the dquot hash list on the filesystem to use listhead
infrastructure rather than the roll-your-own in the quota code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The dquot shaker and the free-list reclaim code use exactly the same
algorithm but the code is duplicated and slightly different in each
case. Make the shaker code use the single dquot reclaim code to
remove the code duplication.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently there is no tracing in log recovery, so it is difficult to
determine what is going on when something goes wrong.
Add tracing for log item recovery to provide visibility into the log
recovery process. The tracing added shows regions being extracted
from the log transactions and added to the transaction hash forming
recovery items, followed by the reordering, cancelling and finally
recovery of the items.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We don't record pin counts in inode events right now, and this makes
it difficult to track down problems related to pinning inodes. Add
the pin count to the inode trace class and add trace events for
pinning and unpinning inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This allows to see in `ps` and similar tools which kthreads are
allotted to which block device/filesystem, similar to what jbd2
does. As the process name is a fixed 16-char array, no extra
space is needed in tasks.
PID TTY STAT TIME COMMAND
2 ? S 0:00 [kthreadd]
197 ? S 0:00 \_ [jbd2/sda2-8]
198 ? S 0:00 \_ [ext4-dio-unwrit]
204 ? S 0:00 \_ [flush-8:0]
2647 ? S 0:00 \_ [xfs_mru_cache]
2648 ? S 0:00 \_ [xfslogd/0]
2649 ? S 0:00 \_ [xfsdatad/0]
2650 ? S 0:00 \_ [xfsconvertd/0]
2651 ? S 0:00 \_ [xfsbufd/ram0]
2652 ? S 0:00 \_ [xfsaild/ram0]
2653 ? S 0:00 \_ [xfssyncd/ram0]
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
The am_hreq.opcount field in the xfs_attrmulti_by_handle() interface
is not bounded correctly. The opcount is used to determine the size
of the buffer required. The size is bounded, but can overflow and so
the size checks may not be sufficient to catch invalid opcounts.
Fix it by catching opcount values that would cause overflows before
calculating the size.
Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
On low memory boxes or those with highmem, kernel can OOM before the
background reclaims inodes via xfssyncd. Add a shrinker to run inode
reclaim so that it inode reclaim is expedited when memory is low.
This is more complex than it needs to be because the VM folk don't
want a context added to the shrinker infrastructure. Hence we need
to add a global list of XFS mount structures so the shrinker can
traverse them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Any inode reclaim flush that returns EAGAIN will result in the inode
reclaim being attempted again later. There is no need to issue a
warning into the logs about this situation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
If we are doing a forced shutdown, we can get lots of noise about
delalloc pages being discarded. This is happens by design during a
forced shutdown, so don't spam the logs with these messages.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Re-apply a commit that had been reverted due to regressions
that have since been fixed.
From 95f8e302c0 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Tue, 6 Jan 2009 14:43:09 +1100
Implement XFS's large buffer support with the new vmap APIs. See the vmap
rewrite (db64fe02) for some numbers. The biggest improvement that comes from
using the new APIs is avoiding the global KVA allocation lock on every call.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Only modifications here were a minor reformat, plus making the patch
apply given the new use of xfs_buf_is_vmapped().
Modified-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Re-apply a commit that had been reverted due to regressions
that have since been fixed.
Original commit: d2859751cd
Author: Nick Piggin <npiggin@suse.de>
Date: Tue, 6 Jan 2009 14:40:44 +1100
XFS's vmap batching simply defers a number (up to 64) of vunmaps,
and keeps track of them in a list. To purge the batch, it just goes
through the list and calls vunamp on each one. This is pretty poor:
a global TLB flush is generally still performed on each vunmap, with
the most expensive parts of the operation being the broadcast IPIs
and locking involved in the SMP callouts, and the locking involved
in the vmap management -- none of these are avoided by just batching
up the calls. I'm actually surprised it ever made much difference.
(Now that the lazy vmap allocator is upstream, this description is
not quite right, but the vunmap batching still doesn't seem to do
much).
Rip all this logic out of XFS completely. I will improve vmap
performance and scalability directly in subsequent patch.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The only change I made was to use the "new" xfs_buf_is_vmapped()
function in a place it had been open-coded in the original.
Modified-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (21 commits)
xfs: return inode fork offset in bulkstat for fsr
xfs: Increase the default size of the reserved blocks pool
xfs: truncate delalloc extents when IO fails in writeback
xfs: check for more work before sleeping in xfssyncd
xfs: Fix a build warning in xfs_aops.c
xfs: fix locking for inode cache radix tree tag updates
xfs: remove xfs_ipin/xfs_iunpin
xfs: cleanup xfs_iunpin_wait/xfs_iunpin_nowait
xfs: kill xfs_lrw.h
xfs: factor common xfs_trans_bjoin code
xfs: stop passing opaque handles to xfs_log.c routines
xfs: split xfs_bmap_btalloc
xfs: fix xfs_fsblock_t tracing
xfs: fix inode pincount check in fsync
xfs: Non-blocking inode locking in IO completion
xfs: implement optimized fdatasync
xfs: remove wrapper for the fsync file operation
xfs: remove wrappers for read/write file operations
xfs: merge xfs_lrw.c into xfs_file.c
xfs: fix dquota trace format
...
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits)
nfsd4: fix minor memory leak
svcrpc: treat uid's as unsigned
nfsd: ensure sockets are closed on error
Revert "sunrpc: move the close processing after do recvfrom method"
Revert "sunrpc: fix peername failed on closed listener"
sunrpc: remove unnecessary svc_xprt_put
NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN
xfs_export_operations.commit_metadata
commit_metadata export operation replacing nfsd_sync_dir
lockd: don't clear sm_monitored on nsm_reboot_lookup
lockd: release reference to nsm_handle in nlm_host_rebooted
nfsd: Use vfs_fsync_range() in nfsd_commit
NFSD: Create PF_INET6 listener in write_ports
SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found"
SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt()
NFSD: Support AF_INET6 in svc_addsock() function
SUNRPC: Use rpc_pton() in ip_map_parse()
nfsd: 4.1 has an rfc number
nfsd41: Create the recovery entry for the NFSv4.1 client
nfsd: use vfs_fsync for non-directories
...
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Similar to the fsync issue fixed a while ago in commit
2daea67e96 we need to write for data to
actually hit the disk before writing out the metadata to guarantee
data integrity for filesystems that modify the inode in the data I/O
completion path. Currently XFS and NFS handle this manually, and AFS
has a write_inode method that does nothing but waiting for data, while
others are possibly missing out on this.
Fortunately this change has a lot less impact than the fsync change
as none of the write_inode methods starts data writeout of any form
by itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We currently use block_invalidatepage() to clean up pages where I/O
fails in ->writepage(). Unfortunately, if the page has delalloc
regions on it, we fail to remove the delalloc regions when we
invalidate the page. This can result in tripping a BUG() in
xfs_get_blocks() later on if a direct IO read is done on that same
region - the delalloc extent is returned when none is supposed to be
there.
Fix this by truncating away the delalloc regions on the page before
invalidating it. Because they are delalloc, we can do this without
needing a transaction. Indeed - if we get ENOSPC errors, we have to
be able to do this truncation without a transaction as there is
no space left for block reservation (typically why we see a ENOSPC
in writeback).
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
xfssyncd processes a queue of work by detaching the queue and
then iterating over all the work items. It then sleeps for a
time period or until new work comes in. If new work is queued
while xfssyncd is actively processing the detached work queue,
it will not process that new work until after a sleep timeout
or the next work event queued wakes it.
Fix this by checking the work queue again before going to sleep.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Fix a build warning that slipped through. Dave Chinner had posted
an updated version of his patch but the previous version--without
this fix--was what got committed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently Q_XQUOTASYNC calls into the quota_sync method, but XFS does something
entirely different in it than the rest of the filesystems. xfs_quota which
calls Q_XQUOTASYNC expects an asynchronous data writeout to flush delayed
allocations, while the "VFS" quota support wants to flush changes to the quota
file.
So make Q_XQUOTASYNC call into the writeback code directly and make the
quota_sync method optional as XFS doesn't need in the sense expected by the
rest of the quota code.
GFS2 was using limited XFS-style quota and has a quota_sync method fitting
neither the style used by vfs_quota_sync nor xfs_fs_quota_sync. I left it
in for now as per discussion with Steve it expects to be called from the
sync path this way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The radix-tree code requires it's users to serialize tag updates
against other updates to the tree. While XFS protects tag updates
against each other it does not serialize them against updates of the
tree contents, which can lead to tag corruption. Fix the inode
cache to always take pag_ici_lock in exclusive mode when updating
radix tree tags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Patrick Schreurs <patrick@news-service.com>
Tested-by: Patrick Schreurs <patrick@news-service.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Move the two declarations to better fitting headers now that
xfs_lrw.c is gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Using a static buffer in xfs_fmtfsblock means we can corrupt traces if
multiple CPUs hit this code path at the same. Just remove xfs_fmtfsblock
for now and print the block number purely numerical. If we want the
NULLFSBLOCK and NULLSTARTBLOCK formatting back the best way would be
a decoding plugin in the trace-cmd userspace command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We need to hold the ilock to check the inode pincount safely. While
we're at it also remove the check for ip->i_itemp->ili_last_lsn, a
pinned inode always has it set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The introduction of barriers to loop devices has created a new IO
order completion dependency that XFS does not handle. The loop
device implements barriers using fsync and so turns a log IO in the
XFS filesystem on the loop device into a data IO in the backing
filesystem. That is, the completion of log IOs in the loop
filesystem are now dependent on completion of data IO in the backing
filesystem.
This can cause deadlocks when a flush daemon issues a log force with
an inode locked because the IO completion of IO on the inode is
blocked by the inode lock. This in turn prevents further data IO
completion from occuring on all XFS filesystems on that CPU (due to
the shared nature of the completion queues). This then prevents the
log IO from completing because the log is waiting for data IO
completion as well.
The fix for this new completion order dependency issue is to make
the IO completion inode locking non-blocking. If the inode lock
can't be grabbed, simply requeue the IO completion back to the work
queue so that it can be processed later. This prevents the
completion queue from being blocked and allows data IO completion on
other inodes to proceed, hence avoiding completion order dependent
deadlocks.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Allow us to track the difference between timestamp and size updates
by using mark_inode_dirty from the I/O completion code, and checking
the VFS inode flags in xfs_file_fsync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently the fsync file operation is divided into a low-level
routine doing all the work and one that implements the Linux file
operation and does minimal argument wrapping. This is a leftover
from the days of the vnode operations layer and can be removed to
simplify the code a bit, as well as preparing for the implementation
of an optimized fdatasync which needs to look at the Linux inode
state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently the aio_read, aio_write, splice_read and splice_write file
operations are divided into a low-level routine doing all the work
and one that implements the Linux file operations and does minimal
argument wrapping. This is a leftover from the days of the vnode
operations layer and can be removed to simplify the code a lot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently the code to implement the file operations is split over
two small files. Merge the content of xfs_lrw.c into xfs_file.c to
have it in one place. Note that I haven't done various cleanups
that are possible after this yet, they will follow in the next
patch. Also the function xfs_dev_is_read_only which was in
xfs_lrw.c before really doesn't fit in here at all and was moved to
xfs_mount.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The be32_to_cpu in the TP_printk output breaks automatic parsing of
the trace format by the trace-cmd tools, so we have to move it into
the TP_assign block. While we're at it also fix the format for the
quota limits to more regular and easier parseable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
While doing some testing of readdir perf a while back,
I noticed that the buffer size we're using internally is
smaller than what glibc gives us by default. Upping this
size helped a bit, and seems safe.
glibc's __alloc_dir() does:
const size_t default_allocation = (4 * BUFSIZ < sizeof (struct dirent64)
? sizeof (struct dirent64) : 4 * BUFSIZ);
const size_t small_allocation = (BUFSIZ < sizeof (struct dirent64)
? sizeof (struct dirent64) : BUFSIZ);
size_t allocation = default_allocation;
#ifdef _STATBUF_ST_BLKSIZE
if (statp != NULL && default_allocation < statp->st_blksize)
allocation = statp->st_blksize;
#endif
and
#define _G_BUFSIZ 8192
#define _IO_BUFSIZ _G_BUFSIZ
# define BUFSIZ _IO_BUFSIZ
so the default buffer is 4 * 8192 = 32768
(except in the unlikely case of blocks > 32k....)
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (52 commits)
fs/xfs: Correct NULL test
xfs: optimize log flushing in xfs_fsync
xfs: only clear the suid bit once in xfs_write
xfs: kill xfs_bawrite
xfs: log changed inodes instead of writing them synchronously
xfs: remove invalid barrier optimization from xfs_fsync
xfs: kill the unused XFS_QMOPT_* flush flags V2
xfs: Use delay write promotion for dquot flushing
xfs: Sort delayed write buffers before dispatch
xfs: Don't issue buffer IO direct from AIL push V2
xfs: Use delayed write for inodes rather than async V2
xfs: Make inode reclaim states explicit
xfs: more reserved blocks fixups
xfs: turn off sign warnings
xfs: don't hold onto reserved blocks on remount,ro
xfs: quota limit statvfs available blocks
xfs: replace KM_LARGE with explicit vmalloc use
xfs: cleanup up xfs_log_force calling conventions
xfs: kill XLOG_VEC_SET_TYPE
xfs: remove duplicate buffer flags
...
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt:
xfs: fix xfs to work with Virtually Indexed architectures
sh: add mm API for DMA to vmalloc/vmap areas
arm: add mm API for DMA to vmalloc/vmap areas
parisc: add mm API for DMA to vmalloc/vmap areas
mm: add coherence API for DMA to vmalloc/vmap areas
This is the commit_metadata export operation for XFS.
- Takes one inode to be committed.
- Forces the log up to the lsn of the inode.
- Doesn't force the log if the inode doesn't have a pincount.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
[bfields@citi.umich.edu: trivial whitespace fix]
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
file_remove_suid already calls into ->setattr to clear the suid and
sgid bits if needed, no need to start a second transaction to do it
ourselves.
Note that xfs_write_clear_setuid issues a sync transaction while the
path through ->setattr doesn't, but that is consistant with the
other filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
xfs_buf.c includes what is essentially a hand rolled version of
blk_rq_map_kern(). In order to work properly with the vmalloc buffers
that xfs uses, this hand rolled routine must also implement the flushing
API for vmap/vmalloc areas.
[style updates from hch@lst.de]
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
There are no more users of this function left in the XFS code
now that we've switched everything to delayed write flushing.
Remove it.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When an inode has already be flushed delayed write,
xfs_inode_clean() returns true and hence xfs_fs_write_inode() can
return on a synchronous inode write without having written the
inode. Currently these sycnhronous writes only come sync(1),
unmount, a sycnhronous NFS export and cachefiles so should be
relatively rare and out of common performance paths.
Realistically, a synchronous inode write is not necessary here; we
can avoid writing the inode by logging any non-transactional changes
that are pending. This needs to be done with synchronous
transactions, but it avoids seeking between the log and inode
clusters as we do now. We don't force the log if the inode is
pinned, though, so this differs from the fsync case. For normal
sys_sync and unmount behaviour this is fine because we do a
synchronous log force in xfs_sync_data which is called from the
->sync_fs code.
It does however break the NFS synchronous export guarantees for now,
but work is under way to fix this at a higher level or for the
higher level to provide an additional flag in the writeback control
to tell us that a log force is needed.
Portions of this patch are based on work from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Currently when the xfsbufd writes delayed write buffers, it pushes
them to disk in the order they come off the delayed write list. If
there are lots of buffers ѕpread widely over the disk, this results
in overwhelming the elevator sort queues in the block layer and we
end up losing the posibility of merging adjacent buffers to minimise
the number of IOs.
Use the new generic list_sort function to sort the delwri dispatch
queue before issue to ensure that the buffers are pushed in the most
friendly order possible to the lower layers.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
All buffers logged into the AIL are marked as delayed write.
When the AIL needs to push the buffer out, it issues an async write of the
buffer. This means that IO patterns are dependent on the order of
buffers in the AIL.
Instead of flushing the buffer, promote the buffer in the delayed
write list so that the next time the xfsbufd is run the buffer will
be flushed by the xfsbufd. Return the state to the xfsaild that the
buffer was promoted so that the xfsaild knows that it needs to cause
the xfsbufd to run to flush the buffers that were promoted.
Using the xfsbufd for issuing the IO allows us to dispatch all
buffer IO from the one queue. This means that we can make much more
enlightened decisions on what order to flush buffers to disk as
we don't have multiple places issuing IO. Optimisations to xfsbufd
will be in a future patch.
Version 2
- kill XFS_ITEM_FLUSHING as it is now unused.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We currently do background inode flush asynchronously, resulting in
inodes being written in whatever order the background writeback
issues them. Not only that, there are also blocking and non-blocking
asynchronous inode flushes, depending on where the flush comes from.
This patch completely removes asynchronous inode writeback. It
removes all the strange writeback modes and replaces them with
either a synchronous flush or a non-blocking delayed write flush.
That is, inode flushes will only issue IO directly if they are
synchronous, and background flushing may do nothing if the operation
would block (e.g. on a pinned inode or buffer lock).
Delayed write flushes will now result in the inode buffer sitting in
the delwri queue of the buffer cache to be flushed by either an AIL
push or by the xfsbufd timing out the buffer. This will allow
accumulation of dirty inode buffers in memory and allow optimisation
of inode cluster writeback at the xfsbufd level where we have much
greater queue depths than the block layer elevators. We will also
get adjacent inode cluster buffer IO merging for free when a later
patch in the series allows sorting of the delayed write buffers
before dispatch.
This effectively means that any inode that is written back by
background writeback will be seen as flush locked during AIL
pushing, and will result in the buffers being pushed from there.
This writeback path is currently non-optimal, but the next patch
in the series will fix that problem.
A side effect of this delayed write mechanism is that background
inode reclaim will no longer directly flush inodes, nor can it wait
on the flush lock. The result is that inode reclaim must leave the
inode in the reclaimable state until it is clean. Hence attempts to
reclaim a dirty inode in the background will simply skip the inode
until it is clean and this allows other mechanisms (i.e. xfsbufd) to
do more optimal writeback of the dirty buffers. As a result, the
inode reclaim code has been rewritten so that it no longer relies on
the ambiguous return values of xfs_iflush() to determine whether it
is safe to reclaim an inode.
Portions of this patch are derived from patches by Christoph
Hellwig.
Version 2:
- cleanup reclaim code as suggested by Christoph
- log background reclaim inode flush errors
- just pass sync flags to xfs_iflush
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A.K.A.: don't rely on xfs_iflush() return value in reclaim
We have gradually been moving checks out of the reclaim code because
they are duplicated in xfs_iflush(). We've had a history of problems
in this area, and many of them stem from the overloading of the
return values from xfs_iflush() and interaction with inode flush
locking to determine if the inode is safe to reclaim.
With the desire to move to delayed write flushing of inodes and
non-blocking inode tree reclaim walks, the overloading of the
return value of xfs_iflush makes it very difficult to determine
the correct thing to do next.
This patch explicitly re-adds the checks to the inode reclaim code,
removing the reliance on the return value of xfs_iflush() to
determine what to do next. It also means that we can clearly
document all the inode states that reclaim must handle and hence
we can easily see that we handled all the necessary cases.
This also removes the need for the xfs_inode_clean() check in
xfs_iflush() as all callers now check this first (safely).
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This mangles the reserved blocks counts a little more.
1) add a helper function for the default reserved count
2) add helper functions to save/restore counts on ro/rw
3) save/restore reserved blocks on freeze/thaw
4) disallow changing reserved count while readonly
V2: changed field name to match Dave's changes
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
If we hold onto reserved blocks when doing a remount,ro we end
up writing the blocks used count to disk that includes the reserved
blocks. Reserved blocks are not actually used, so this results in
the values in the superblock being incorrect.
Hence if we run xfs_check or xfs_repair -n while the filesystem is
mounted remount,ro we end up with an inconsistent filesystem being
reported. Also, running xfs_copy on the remount,ro filesystem will
result in an inconsistent image being generated.
To fix this, unreserve the blocks when doing the remount,ro, and
reserved them again on remount,rw. This way a remount,ro filesystem
will appear consistent on disk to all utilities.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We use the KM_LARGE flag to make kmem_alloc and friends use vmalloc
if necessary. As we only need this for a few boot/mount time
allocations just switch to explicit vmalloc calls there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove the XFS_LOG_FORCE argument which was always set, and the
XFS_LOG_URGE define, which was never used.
Split xfs_log_force into a two helpers - xfs_log_force which forces
the whole log, and xfs_log_force_lsn which forces up to the
specified LSN. The underlying implementations already were entirely
separate, as were the users.
Also re-indent the new _xfs_log_force/_xfs_log_force which
previously had a weird coding style.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently we define aliases for the buffer flags in various
namespaces, which only adds confusion. Remove all but the XBF_
flags to clean this up a bit.
Note that we still abuse XFS_B_ASYNC/XBF_ASYNC for some non-buffer
uses, but I'll clean that up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
To be consistent with the directory code, the attr code should use
unsigned names. Convert the names from the vfs at the highest level
to unsigned, and ænsure they are consistenly used as unsigned down
to disk.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_buf_iomove() uses xfs_caddr_t as it's parameter types, but it doesn't
care about the signedness of the variables as it is just copying the
data. Change the prototype to use void * so that we don't get sign
warnings at call sites.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move xfsbdstrat and xfs_bdstrat_cb from xfs_lrw.c and xfs_bioerror
and xfs_bioerror_relse from xfs_rw.c into xfs_buf.c. This also
means xfs_bioerror and xfs_bioerror_relse can be marked static now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Fold XFS_bwrite into it's only caller, xfs_bwrite and move it into
xfs_buf.c instead of leaving it as a fairly large inline function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Don't bother using XFS_bwrite as it doesn't provide much code for
our use case. Instead opencode it and fold xlog_bdstrat_cb into the
new xlog_bdstrat helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The filestreams cache flush is not needed in the sync code as it
does not affect data writeback, and it is now not used by the growfs
code, either, so kill it.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Uninline xfs_perag_{get,put} so that tracepoints can be inserted
into them to speed debugging of reference count problems.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
xfs_get_perag is really getting the perag that an inode belongs to
based on it's inode number. Convert the use of this function to just
get the perag from a provided ag number. Use this new function to
obtain the per-ag structure when traversing the per AG inode trees
for sync and reclaim.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The xfsbufd wakes every xfsbufd_centisecs (once per second by
default) for each filesystem even when the filesystem is idle. If
the xfsbufd has nothing to do, put it into a long term sleep and
only wake it up when there is work pending (i.e. dirty buffers to
flush soon). This will make laptop power misers happy.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now that the AIL push algorithm is traversal safe, we don't need a
watchdog function in the xfsaild to catch pushes that fail to make
progress. Remove the watchdog timeout and make pushes purely driven
by demand. This will remove the once-per-second wakeup that is seen
when the filesystem is idle and make laptop power misers happy.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Just minor housekeeping, a lot more functions can be trivially made
static; others could if we reordered things a bit...
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
To be able to diagnose whether the swap extents function is
detecting compatible inode data fork configurations for swapping
extents, add tracing points to the code to allow us to see the
format of the inode forks before and after the swap.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We cannot do direct inode reclaim without taking the flush lock to
ensure that we do not reclaim an inode under IO. We check the inode
is clean before doing direct reclaim, but this is not good enough
because the inode flush code marks the inode clean once it has
copied the in-core dirty state to the backing buffer.
It is the flush lock that determines whether the inode is still
under IO, even though it is marked clean, and the inode is still
required at IO completion so we can't reclaim it even though it is
clean in core. Hence the requirement that we need to take the flush
lock even on clean inodes because this guarantees that the inode
writeback IO has completed and it is safe to reclaim the inode.
With delayed write inode flushing, we coul dend up waiting a long
time on the flush lock even for a clean inode. The background
reclaim already handles this efficiently, so avoid all the problems
by killing the direct reclaim path altogether.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The reclaim code will handle flushing of dirty inodes before reclaim
occurs, so avoid them when determining whether an inode is a
candidate for flushing to disk when walking the radix trees. This
is based on a test patch from Christoph Hellwig.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Make the inode tree reclaim walk exclusive to avoid races with
concurrent sync walkers and lookups. This is a version of a patch
posted by Christoph Hellwig that avoids all the code duplication.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
When we search for and find a busy extent during allocation we
force the log out to ensure the extent free transaction is on
disk before the allocation transaction. The current implementation
has a subtle bug in it--it does not handle multiple overlapping
ranges.
That is, if we free lots of little extents into a single
contiguous extent, then allocate the contiguous extent, the busy
search code stops searching at the first extent it finds that
overlaps the allocated range. It then uses the commit LSN of the
transaction to force the log out to.
Unfortunately, the other busy ranges might have more recent
commit LSNs than the first busy extent that is found, and this
results in xfs_alloc_search_busy() returning before all the
extent free transactions are on disk for the range being
allocated. This can lead to potential metadata corruption or
stale data exposure after a crash because log replay won't replay
all the extent free transactions that cover the allocation range.
Modified-by: Alex Elder <aelder@sgi.com>
(Dropped the "found" argument from the xfs_alloc_busysearch trace
event.)
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
We currently have some rather odd code in xfs_setattr for
updating the a/c/mtime timestamps:
- first we do a non-transaction update if all three are updated
together
- second we implicitly update the ctime for various changes
instead of relying on the ATTR_CTIME flag
- third we set the timestamps to the current time instead of the
arguments in the iattr structure in many cases.
This patch makes sure we update it in a consistent way:
- always transactional
- ctime is only updated if ATTR_CTIME is set or we do a size
update, which is a special case
- always to the times passed in from the caller instead of the
current time
The only non-size caller of xfs_setattr that doesn't come from
the VFS is updated to set ATTR_CTIME and pass in a valid ctime
value.
Reported-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Using DECLARE_EVENT_CLASS allows us to to use trace event code
instead of duplicating it in the binary. This was not available
before 2.6.33 so it had to be done as a separate step once the
prerequisite was merged.
This only requires changes to xfs_trace.h and the results are
rather impressive:
hch@brick:~/work/linux-2.6/obj-kvm$ size fs/xfs/xfs.o*
text data bss dec hex filename
607732 41884 3616 653232 9f7b0 fs/xfs/xfs.o
1026732 41884 3808 1072424 105d28 fs/xfs/xfs.o.old
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Randy Dunlap Reported printk() format-related warnings reported
on i386 builds in his environment. Dave Chinner provided this
patch to eliminate them.
Signed-off by: Dave Chinner <david@fromorbit.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
After I_SYNC was split from I_LOCK the leftover is always used together with
I_NEW and thus superflous.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
XFS: Free buffer pages array unconditionally
xfs: kill xfs_bmbt_rec_32/64 types
xfs: improve metadata I/O merging in the elevator
xfs: check for not fully initialized inodes in xfs_ireclaim
The code in xfs_free_buf() only attempts to free the b_pages array if the
buffer is a page cache backed or page allocated buffer. The extra log buffer
that is used when the log wraps uses pages that are allocated to a different
log buffer, but it still has a b_pages array allocated when those pages
are associated to with the extra buffer in xfs_buf_associate_memory.
Hence we need to always attempt to free the b_pages array when tearing
down a buffer, not just on buffers that are explicitly marked as page bearing
buffers. This fixes a leak detected by the kernel memory leak code.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Change all async metadata buffers to use [READ|WRITE]_META I/O types
so that the I/O doesn't get issued immediately. This allows merging of
adjacent metadata requests but still prioritises them over bulk data.
This shows a 10-15% improvement in sequential create speed of small
files.
Don't include the log buffers in this classification - leave them as
sync types so they are issued immediately.
Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently the locking in blockdev_direct_IO is a mess, we have three different
locking types and very confusing checks for some of them. The most
complicated one is DIO_OWN_LOCKING for reads, which happens to not actually be
used.
This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read case
is unused anyway, and the write side is almost identical to DIO_NO_LOCKING.
The difference is that DIO_NO_LOCKING always sets the create argument for
the get_blocks callback to zero, but we can easily move that to the actual
get_blocks callbacks. There are four users of the DIO_NO_LOCKING mode:
gfs already ignores the create argument and thus is fine with the new
version, ocfs2 only errors out if create were ever set, and we can remove
this dead code now, the block device code only ever uses create for an
error message if we are fully beyond the device which can never happen,
and last but not least XFS will need the new behavour for writes.
Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag. Separate out the check for not allowing to fill holes into a separate
flag, although for now both flags always get set at the same time.
Also revamp the documentation of the locking scheme to actually make sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods. This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute. With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.
Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.
[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the locking in blockdev_direct_IO is a mess, we have three
different locking types and very confusing checks for some of them. The
most complicated one is DIO_OWN_LOCKING for reads, which happens to not
actually be used.
This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read
case is unused anyway, and the write side is almost identical to
DIO_NO_LOCKING. The difference is that DIO_NO_LOCKING always sets the
create argument for the get_blocks callback to zero, but we can easily
move that to the actual get_blocks callbacks. There are four users of the
DIO_NO_LOCKING mode: gfs already ignores the create argument and thus is
fine with the new version, ocfs2 only errors out if create were ever set,
and we can remove this dead code now, the block device code only ever uses
create for an error message if we are fully beyond the device which can
never happen, and last but not least XFS will need the new behavour for
writes.
Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag. Separate out the check for not allowing to fill holes into a
separate flag, although for now both flags always get set at the same
time.
Also revamp the documentation of the locking scheme to actually make
sense.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.
To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:
echo 1 > /sys/kernel/debug/tracing/events/xfs/enable
or alternatively enable single events by just doing the same in one
event subdirectory, e.g.
echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable
or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail. To reads the events do a
cat /sys/kernel/debug/tracing/trace
Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ. This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
allowing us to e.g. count how often certain workloads git various
spots in XFS. Take a look at
http://lwn.net/Articles/346470/
for some examples.
Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.
And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:
fs/xfs/Makefile | 8
fs/xfs/linux-2.6/xfs_acl.c | 1
fs/xfs/linux-2.6/xfs_aops.c | 52 -
fs/xfs/linux-2.6/xfs_aops.h | 2
fs/xfs/linux-2.6/xfs_buf.c | 117 +--
fs/xfs/linux-2.6/xfs_buf.h | 33
fs/xfs/linux-2.6/xfs_fs_subr.c | 3
fs/xfs/linux-2.6/xfs_ioctl.c | 1
fs/xfs/linux-2.6/xfs_ioctl32.c | 1
fs/xfs/linux-2.6/xfs_iops.c | 1
fs/xfs/linux-2.6/xfs_linux.h | 1
fs/xfs/linux-2.6/xfs_lrw.c | 87 --
fs/xfs/linux-2.6/xfs_lrw.h | 45 -
fs/xfs/linux-2.6/xfs_super.c | 104 ---
fs/xfs/linux-2.6/xfs_super.h | 7
fs/xfs/linux-2.6/xfs_sync.c | 1
fs/xfs/linux-2.6/xfs_trace.c | 75 ++
fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++
fs/xfs/linux-2.6/xfs_vnode.h | 4
fs/xfs/quota/xfs_dquot.c | 110 ---
fs/xfs/quota/xfs_dquot.h | 21
fs/xfs/quota/xfs_qm.c | 40 -
fs/xfs/quota/xfs_qm_syscalls.c | 4
fs/xfs/support/ktrace.c | 323 ---------
fs/xfs/support/ktrace.h | 85 --
fs/xfs/xfs.h | 16
fs/xfs/xfs_ag.h | 14
fs/xfs/xfs_alloc.c | 230 +-----
fs/xfs/xfs_alloc.h | 27
fs/xfs/xfs_alloc_btree.c | 1
fs/xfs/xfs_attr.c | 107 ---
fs/xfs/xfs_attr.h | 10
fs/xfs/xfs_attr_leaf.c | 14
fs/xfs/xfs_attr_sf.h | 40 -
fs/xfs/xfs_bmap.c | 507 +++------------
fs/xfs/xfs_bmap.h | 49 -
fs/xfs/xfs_bmap_btree.c | 6
fs/xfs/xfs_btree.c | 5
fs/xfs/xfs_btree_trace.h | 17
fs/xfs/xfs_buf_item.c | 87 --
fs/xfs/xfs_buf_item.h | 20
fs/xfs/xfs_da_btree.c | 3
fs/xfs/xfs_da_btree.h | 7
fs/xfs/xfs_dfrag.c | 2
fs/xfs/xfs_dir2.c | 8
fs/xfs/xfs_dir2_block.c | 20
fs/xfs/xfs_dir2_leaf.c | 21
fs/xfs/xfs_dir2_node.c | 27
fs/xfs/xfs_dir2_sf.c | 26
fs/xfs/xfs_dir2_trace.c | 216 ------
fs/xfs/xfs_dir2_trace.h | 72 --
fs/xfs/xfs_filestream.c | 8
fs/xfs/xfs_fsops.c | 2
fs/xfs/xfs_iget.c | 111 ---
fs/xfs/xfs_inode.c | 67 --
fs/xfs/xfs_inode.h | 76 --
fs/xfs/xfs_inode_item.c | 5
fs/xfs/xfs_iomap.c | 85 --
fs/xfs/xfs_iomap.h | 8
fs/xfs/xfs_log.c | 181 +----
fs/xfs/xfs_log_priv.h | 20
fs/xfs/xfs_log_recover.c | 1
fs/xfs/xfs_mount.c | 2
fs/xfs/xfs_quota.h | 8
fs/xfs/xfs_rename.c | 1
fs/xfs/xfs_rtalloc.c | 1
fs/xfs/xfs_rw.c | 3
fs/xfs/xfs_trans.h | 47 +
fs/xfs/xfs_trans_buf.c | 62 -
fs/xfs/xfs_vnodeops.c | 8
70 files changed, 2151 insertions(+), 2592 deletions(-)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
ext3: Fix data / filesystem corruption when write fails to copy data
ext4: Support for 64-bit quota format
ext3: Support for vfsv1 quota format
quota: Implement quota format with 64-bit space and inode limits
quota: Move definition of QFMT_OCFS2 to linux/quota.h
ext2: fix comment in ext2_find_entry about return values
ext3: Unify log messages in ext3
ext2: clear uptodate flag on super block I/O error
ext2: Unify log messages in ext2
ext3: make "norecovery" an alias for "noload"
ext3: Don't update the superblock in ext3_statfs()
ext3: journal all modifications in ext3_xattr_set_handle
ext2: Explicitly assign values to on-disk enum of filetypes
quota: Fix WARN_ON in lookup_one_len
const: struct quota_format_ops
ubifs: remove manual O_SYNC handling
afs: remove manual O_SYNC handling
kill wait_on_page_writeback_range
vfs: Implement proper O_SYNC semantics
...
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: Fix error return for fallocate() on XFS
xfs: cleanup dmapi macros in the umount path
xfs: remove incorrect sparse annotation for xfs_iget_cache_miss
xfs: kill the STATIC_INLINE macro
xfs: uninline xfs_get_extsz_hint
xfs: rename xfs_attr_fetch to xfs_attr_get_int
xfs: simplify xfs_buf_get / xfs_buf_read interfaces
xfs: remove IO_ISAIO
xfs: Wrapped journal record corruption on read at recovery
xfs: cleanup data end I/O handlers
xfs: use WRITE_SYNC_PLUG for synchronous writeout
xfs: reset the i_iolock lock class in the reclaim path
xfs: I/O completion handlers must use NOFS allocations
xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks
xfs: simplify inode teardown
Noticed that through glibc fallocate would return 28 rather than -1
and errno = 28 for ENOSPC. The xfs routines uses XFS_ERROR format
positive return error codes while the syscalls use negative return
codes. Fixup the two cases in xfs_vn_fallocate syscall to convert to
negative.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
Stop the flag saving as we never mangle those in the unmount path, and
hide all the weird arguents to the dmapi code inside the
XFS_SEND_PREUNMOUNT / XFS_SEND_UNMOUNT macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove our own STATIC_INLINE macro. For small function inside
implementation files just use STATIC and let gcc inline it, and for
those in headers do the normal static inline - they are all small
enough to be inlined for debug builds, too.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently the low-level buffer cache interfaces are highly confusing
as we have a _flags variant of each that does actually respect the
flags, and one without _flags which has a flags argument that gets
ignored and overriden with a default set. Given that very few places
use the default arguments get rid of the duplication and convert all
callers to pass the flags explicitly. Also remove the now confusing
_flags postfix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We set the IO_ISAIO flag for all read/write I/O since early Linux
2.6.x. Remove it as it has lost it's purpose long ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently we have different end I/O handlers for read vs the different
types of write I/O. But they are all very similar so we could just
use one with a few conditionals and reduce code size a lot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The VM and I/O schedulers now expect us to use WRITE_SYNC_PLUG for
synchronous writeout. Right now I can't see any changes in performance
numbers with this, but we're getting some beating for not using it,
and the knowledge definitely could help the block code to make better
decisions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The iolock is used for protecting reads, writes and block truncates
against each other. We have two classes of callers, the first one is
induced by a file operation and requires a reference to the inode be
held and not dropped after the operation is done:
- xfs_vm_vmap, xfs_vn_fallocate, xfs_read, xfs_write, xfs_splice_read,
xfs_splice_write and xfs_setattr are all implementations of VFS
methods that require a live inode
- xfs_getbmap and xfs_swap_extents are ioctl subcommand for which the
same is true
- xfs_truncate_file is only called on quota inodes just returned from
xfs_iget
- xfs_sync_inode_data does the lock just after an igrab()
- xfs_filestream_associate and xfs_filestream_new_ag take the iolock
on the parent inode of an inode which by VFS rules must be referenced
And we have various calls to truncate blocks past EOF or the whole
file when dropping the last reference to an inode. Unfortunately
lockdep complains when we do memory allocations that can recurse into
the filesystem in the first class because the second class happens to
take the same lock. To avoid this re-init the iolock in the beginning
of xfs_fs_clear_inode to get a new lock class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently the reclaim code for the case where we don't reclaim the
final reclaim is overly complicated. We know that the inode is clean
but instead of just directly reclaiming the clean inode we go through
the whole process of marking the inode reclaimable just to directly
reclaim it from the calling context. Besides being overly complicated
this introduces a race where iget could recycle an inode between
marked reclaimable and actually being reclaimed leading to panics.
This patch gets rid of the existing reclaim path, and replaces it with
a simple call to xfs_ireclaim if the inode was clean. While we're at
it we also use the slightly more lax xfs_inode_clean check we'd use
later to determine if we need to flush the inode here.
Finally get rid of xfs_reclaim function and place the remaining small
bits of reclaim code directly into xfs_fs_destroy_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Patrick Schreurs <patrick@news-service.com>
Reported-by: Tommy van Leeuwen <tommy@news-service.com>
Tested-by: Patrick Schreurs <patrick@news-service.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
While Linux provided an O_SYNC flag basically since day 1, it took until
Linux 2.4.0-test12pre2 to actually get it implemented for filesystems,
since that day we had generic_osync_around with only minor changes and the
great "For now, when the user asks for O_SYNC, we'll actually give
O_DSYNC" comment. This patch intends to actually give us real O_SYNC
semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC
patches which are required before this patch it's actually surprisingly
simple, we just need to figure out when to set the datasync flag to
vfs_fsync_range and when not.
This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's
numerical value to keep binary compatibility, and adds a new real O_SYNC
flag. To guarantee backwards compatiblity it is defined as expanding to
both the O_DSYNC and the new additional binary flag (__O_SYNC) to make
sure we are backwards-compatible when compiled against the new headers.
This also means that all places that don't care about the differences can
just check O_DSYNC and get the right behaviour for O_SYNC, too - only
places that actuall care need to check __O_SYNC in addition. Drivers and
network filesystems have been updated in a fail safe way to always do the
full sync magic if O_DSYNC is set. The few places setting O_SYNC for
lower layers are kept that way for now to stay failsafe.
We enforce that O_DSYNC is set when __O_SYNC is set early in the open path
to make sure we always get these sane options.
Note that parisc really screwed up their headers as they already define a
O_DSYNC that has always been a no-op. We try to repair it by using it for
the new O_DSYNC and redefinining O_SYNC to send both the traditional
O_SYNC numerical value _and_ the O_DSYNC one.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger@sun.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits)
cfq-iosched: Do not access cfqq after freeing it
block: include linux/err.h to use ERR_PTR
cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
blkio: Allow CFQ group IO scheduling even when CFQ is a module
blkio: Implement dynamic io controlling policy registration
blkio: Export some symbols from blkio as its user CFQ can be a module
block: Fix io_context leak after failure of clone with CLONE_IO
block: Fix io_context leak after clone with CLONE_IO
cfq-iosched: make nonrot check logic consistent
io controller: quick fix for blk-cgroup and modular CFQ
cfq-iosched: move IO controller declerations to a header file
cfq-iosched: fix compile problem with !CONFIG_CGROUP
blkio: Documentation
blkio: Wait on sync-noidle queue even if rq_noidle = 1
blkio: Implement group_isolation tunable
blkio: Determine async workload length based on total number of queues
blkio: Wait for cfq queue to get backlogged if group is empty
blkio: Propagate cgroup weight updation to cfq groups
blkio: Drop the reference to queue once the task changes cgroup
blkio: Provide some isolation between groups
...
- no one is calling wb_writeback and write_cache_pages with
wbc.nonblocking=1 any more
- lumpy pageout will want to do nonblocking writeback without the
congestion wait
So remove the congestion checks as suggested by Chris.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Alex Elder <aelder@sgi.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
For consistency drop & in front of every proc_handler. Explicity
taking the address is unnecessary and it prevents optimizations
like stubbing the proc_handlers to NULL.
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Now that sys_sysctl is a generic wrapper around /proc/sys .ctl_name
and .strategy members of sysctl tables are dead code. Remove them.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The xfs_quota returns ENOSYS when remove command is executed.
Reproducable with following steps.
# mount -t xfs -o uquota /dev/sda7 /mnt/mp1
# xfs_quota -x -c off -c remove
XFS_QUOTARM: Function not implemented.
The remove command is allowed during quotaoff, but xfs_fs_set_xstate()
checks whether quota is running, and it leads to ENOSYS.
To solve this problem, add a check for X_QUOTARM.
Signed-off-by: Ryota Yamauchi <r-yamauchi@vf.jp.nec.com>
Signed-off-by: Utako Kusaka <u-kusaka@wm.jp.nec.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that the VFS actually waits for the data I/O to complete before
calling into ->fsync we can stop doing it ourselves.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We want to always cover the log after writing out the superblock, and
in case of a synchronous writeout make sure we actually wait for the
log to be covered. That way a filesystem that has been sync()ed can
be considered clean by log recovery.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
To make sure they get properly waited on in sync when I/O is in flight and
we latter need to update the inode size. Requires a new helper to check if an
ioend structure is beyond the current EOF.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Sort out ->sync_fs to not perform a superblock writeback for the wait = 0 case
as that is just an optional first pass and the superblock will be written back
properly in the next call with wait = 1. Instead perform an opportunistic
quota writeback to have less work later. Also remove the freeze special case
as we do a proper wait = 1 call in the freeze code anyway.
Also rename the function to xfs_fs_sync_fs to match the normal naming
convention, update comments and avoid calling into the laptop_mode logic on
an error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We need to do a synchronous xfs_sync_fsdata to make sure the superblock
actually is on disk when we return.
Also remove SYNC_BDFLUSH flag to xfs_sync_inodes because that particular
flag is never checked.
Move xfs_filestream_flush call later to only release inodes after they
have been written out.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
This is picking up on Felix's repost of Dave's patch to implement a
.dirty_inode method. We really need this notification because
the VFS keeps writing directly into the inode structure instead
of going through methods to update this state. In addition to
the long-known atime issue we now also have a caller in VM code
that updates c/mtime that way for shared writeable mmaps. And
I found another one that no one has noticed in practice in the FIFO
code.
So implement ->dirty_inode to set i_update_core whenever the
inode gets externally dirtied, and switch the c/mtime handling to
the same scheme we already use for atime (always picking up
the value from the Linux inode).
Note that this patch also removes the xfs_synchronize_atime call
in xfs_reclaim it was superflous as we already synchronize the time
when writing the inode via the log (xfs_inode_item_format) or the
normal buffers (xfs_iflush_int).
In addition also remove the I_CLEAR check before copying the Linux
timestamps - now that we always have the Linux inode available
we can always use the timestamps in it.
Also switch to just using file_update_time for regular reads/writes -
that will get us all optimization done to it for free and make
sure we notice early when it breaks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code
But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
HWPOISON: Enable error_remove_page on btrfs
HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
HWPOISON: Add madvise() based injector for hardware poisoned pages v4
HWPOISON: Enable error_remove_page for NFS
HWPOISON: Enable .remove_error_page for migration aware file systems
HWPOISON: The high level memory error handler in the VM v7
HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
HWPOISON: shmem: call set_page_dirty() with locked page
HWPOISON: Define a new error_remove_page address space op for async truncation
HWPOISON: Add invalidate_inode_page
HWPOISON: Refactor truncate to allow direct truncating of page v2
HWPOISON: check and isolate corrupted free pages v2
HWPOISON: Handle hardware poisoned pages in try_to_unmap
HWPOISON: Use bitmask/action code for try_to_unmap behaviour
HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
HWPOISON: Add poison check to page fault handling
HWPOISON: Add basic support for poisoned pages in fault handler v3
HWPOISON: Add new SIGBUS error codes for hardware poison signals
HWPOISON: Add support for poison swap entries v2
HWPOISON: Export some rmap vma locking to outside world
...
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.
I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.
Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?
Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
fix the following 'make includecheck' warning:
fs/xfs/linux-2.6/xfs_iops.c: xfs_acl.h is included more than once.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Christoph Hellwig says that it is enough for XFS to call
filemap_write_and_wait_range() instead of sync_page_range() because we do
all the metadata syncing when forcing the log.
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This avoids an indirect call in the VFS for each path component lookup.
Well, at least as long as you own the directory in question, and the ACL
check is unnecessary.
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you enable group or project quotas on an XFS file system, then the
mount table presented through /proc/self/mounts erroneously shows
that both options are in effect for the file system. The root of
the problem is some bad logic in the xfs_showargs() function, which
is used to format the file system type-specific options in effect
for a file system.
The problem originated in this GIT commit:
Move platform specific mount option parse out of core XFS code
Date: 11/22/07
Author: Dave Chinner
SHA1 ID: a67d7c5f5d
For XFS quotas, project and group quota management are mutually
exclusive--only one can be in effect at a time. There are two
parts to managing quotas: aggregating usage information; and
enforcing limits. It is possible to have a quota in effect
(aggregating usage) but not enforced.
These features are recorded on an XFS mount point using these flags:
XFS_PQUOTA_ACCT - Project quotas are aggregated
XFS_GQUOTA_ACCT - Group quotas are aggregated
XFS_OQUOTA_ENFD - Project/group quotas are enforced
The code in error is in fs/xfs/linux-2.6/xfs_super.c:
if (mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))
seq_puts(m, "," MNTOPT_PRJQUOTA);
else if (mp->m_qflags & XFS_PQUOTA_ACCT)
seq_puts(m, "," MNTOPT_PQUOTANOENF);
if (mp->m_qflags & (XFS_GQUOTA_ACCT|XFS_OQUOTA_ENFD))
seq_puts(m, "," MNTOPT_GRPQUOTA);
else if (mp->m_qflags & XFS_GQUOTA_ACCT)
seq_puts(m, "," MNTOPT_GQUOTANOENF);
The problem is that XFS_OQUOTA_ENFD will be set in mp->m_qflags
if either group or project quotas are enforced, and as a result
both MNTOPT_PRJQUOTA and MNTOPT_GRPQUOTA will be shown as mount
options.
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Fix a small typo in the compat ioctl handler that cause the swapext
compat handler to never be called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix a small typo in the compat ioctl handler that cause the swapext
compat handler to never be called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
The guarantees for O_SYNC are exactly the same as the ones we need to
make for an fsync call (and given that Linux O_SYNC is O_DSYNC the
equivalent is fdadatasync, but we treat both the same in XFS), except
with a range data writeout. Jan Kara has started unifying these two
path for filesystems using the generic helpers, and I've started to
look at XFS.
The actual transaction commited by xfs_fsync and xfs_write_sync_logforce
has a different transaction number, but actually is exactly the same.
We'll only use the fsync transaction going forward. One major difference
is that xfs_write_sync_logforce never issues a cache flush unless we
commit a transaction causing that as a side-effect, which is an obvious
bug in the O_SYNC handling. Second all the locking and i_update_size
vs i_update_core changes from 978b723712
never made it to xfs_write_sync_logforce, so we add them back.
To make xfs_fsync easily usable from the O_SYNC path, the filemap_fdatawait
call is moved up to xfs_file_fsync, so that we don't wait on the whole
file after we already waited for our portion in xfs_write.
We'll also use a plain call to filemap_write_and_wait_range instead
of the previous sync_page_rang which did it in two steps including
an half-hearted inode write out that doesn't help us.
Once we're done with this also remove the now useless i_update_size
tracking.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
The locking in xfs_iget_cache_hit currently has numerous problems:
- we clear the reclaim tag without i_flags_lock which protects
modifications to it
- we call inode_init_always which can sleep with pag_ici_lock
held (this is oss.sgi.com BZ #819)
- we acquire and drop i_flags_lock a lot and thus provide no
consistency between the various flags we set/clear under it
This patch fixes all that with a major revamp of the locking in
the function. The new version acquires i_flags_lock early and
only drops it once we need to call into inode_init_always or before
calling xfs_ilock.
This patch fixes a bug seen in the wild where we race modifying the
reclaim tag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: fix spin_is_locked assert on uni-processor builds
xfs: check for dinode realtime flag corruption
use XFS_CORRUPTION_ERROR in xfs_btree_check_sblock
xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_get
xfs: switch to NOFS allocation under i_lock in xfs_readlink_bmap
xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_set
xfs: switch to NOFS allocation under i_lock in xfs_buf_associate_memory
xfs: switch to NOFS allocation under i_lock in xfs_dir_cilookup_result
xfs: switch to NOFS allocation under i_lock in xfs_da_buf_make
xfs: switch to NOFS allocation under i_lock in xfs_da_state_alloc
xfs: switch to NOFS allocation under i_lock in xfs_getbmap
xfs: avoid memory allocation under m_peraglock in growfs code
xfs_buf_associate_memory is used for setting up the spare buffer for the
log wrap case in xlog_sync which can happen under i_lock when called from
xfs_fsync. The i_lock mutex is taken in reclaim context so all allocations
under it must avoid recursions into the filesystem. There are a couple
more uses of xfs_buf_associate_memory in the log recovery code that are
also affected by this, but I'd rather keep the code simple than passing on
a gfp_mask argument. Longer term we should just stop requiring the memoery
allocation in xlog_sync by some smaller rework of the buffer layer.
Reported by the new reclaim context tracing in lockdep.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
VM calculation for nr_to_write seems off. Bump it way
up, this gets simple streaming writes zippy again.
To be reviewed again after Jens' writeback changes.
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Cc: Chris Mason <chris.mason@oracle.com>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
commit 6321e3ed2a caused
the full bmv_count's worth of getbmapx structures to get
allocated; telling it to do MAXEXTNUM was a bit insane,
resulting in ENOMEM every time.
Chop it down to something reasonable, the number of slots
in the caller's input buffer. If this is too large the
caller may get ENOMEM but the reason should not be a
mystery, and they can try again with something smaller.
We add 1 to the value because in the normal getbmap
world, bmv_count includes the header and xfs_getbmap does:
nex = bmv->bmv_count - 1;
if (nex <= 0)
return XFS_ERROR(EINVAL);
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Follow-up to "block: enable by default support for large devices
and files on 32-bit archs".
Rename CONFIG_LBD to CONFIG_LBDAF to:
- allow update of existing [def]configs for "default y" change
- reflect that it is used also for large files support nowadays
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Identation got messed up when merging the current_umask changes with
the generic ACL support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
the write_super method is used for
(1) writing back the superblock periodically from pdflush
(2) called just before ->sync_fs for data integerity syncs
We don't need (1) because we have our own peridoc writeout through xfssyncd,
and we don't need (2) because xfs_fs_sync_fs performs a proper synchronous
superblock writeout after all other data and metadata has been written out.
Also remove ->s_dirt tracking as it's only used to decide when too call
->write_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead. The ondisk format is of course left
unchanged.
This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
SYNC_BDFLUSH is a leftover from IRIX and rather misnamed for todays
code. Make xfs_sync_fsdata and xfs_dq_sync use the SYNC_TRYLOCK flag
for not blocking on logs just as the inode sync code already does.
For xfs_sync_fsdata it's a trivial 1:1 replacement, but for xfs_qm_sync
I use the opportunity to decouple the non-blocking lock case from the
different flushing modes, similar to the inode sync code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
We want to wait for all I/O to finish when we do data integrity syncs. So
there is no reason to keep SYNC_WAIT separate from SYNC_IOWAIT. This
causes a little change in behaviour for the ENOSPC flushing code which now
does a second submission and wait of buffered I/O, but that should finish
ASAP as we already did an asynchronous writeout earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
xfs_sync_inodes is used to write back either file data or inode metadata.
In general we always do these separately, except for one fishy case in
xfs_fs_put_super that does both. So separate xfs_sync_inodes into
separate xfs_sync_data and xfs_sync_attr functions. In xfs_fs_put_super
we first call the data sync and then the attr sync as that was the previous
order. The moved log force in that path doesn't make a difference because
we will force the log again as part of the real unmount process.
The filesystem readonly checks are not performed by the new function but
instead moved into the callers, given that most callers alredy have it
further up in the stack. Also add debug checks that we do not pass in
incorrect flags in the new xfs_sync_data and xfs_sync_attr function and
fix the one place that did pass in a wrong flag.
Also remove a comment mentioning xfs_sync_inodes that has been incorrect
for a while because we always take either the iolock or ilock in the
sync path these days.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Use xfs_inode_ag_iterator instead of opencoding the inode walk in the
quota code. Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static
to allow using them from the quota code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Given that we walk across the per-ag inode lists so often, it makes sense to
introduce an iterator for this.
Convert the sync and reclaim code to use this new iterator, quota code will
follow in the next patch.
Also change xfs_reclaim_inode to return -EGAIN instead of 1 for an inode
already under reclaim. This simplifies the AG iterator and doesn't
matter for the only other caller.
[hch: merged the lookup and execute callbacks back into one to get the
pag_ici_lock locking correct and simplify the code flow]
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
The noblock parameter of xfs_reclaim_inodes is only ever set to zero. Remove
it and all the conditional code that is never executed.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Separate the validation of inodes found by the radix
tree walk from the radix tree lookup.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
In many cases we only want to sync inode metadata. Split out the inode
flushing into a separate helper to prepare factoring the inode sync code.
Based on a patch from Dave Chinner, but redone to keep the current behaviour
exactly and leave changes to the flushing logic to another patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
In many cases we only want to sync inode data. Start spliting the inode sync
into data sync and inode sync by factoring out the inode data flush.
[hch: minor cleanups]
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.
Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.
This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.
Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.
Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:
text data bss dec hex filename
615957 2960 3848 622765 980ad fs/xfs/xfs.o
617231 3152 3848 624231 98667 fs/xfs/xfs.o.old
Fallout:
- xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
the inode locked and xfs_qm_dqattach which does the locking around it,
thus removing XFS_QMOPT_ILOCKED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: prevent deadlock in xfs_qm_shake()
xfs: fix overflow in xfs_growfs_data_private
xfs: fix double unlock in xfs_swap_extents()
It's possible to recurse into filesystem from the memory
allocation, which deadlocks in xfs_qm_shake(). Add check
for __GFP_FS, and bail out if it is not set.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
It's possible to recurse into filesystem from the memory
allocation, which deadlocks in xfs_qm_shake(). Add check
for __GFP_FS, and bail out if it is not set.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case. The
sector size will be 4KB but the logical block size will remain
512-bytes. Hence we need to distinguish between the physical block size
and the logical ditto.
This patch renames hardsect_size to logical_block_size.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: remove xfs_flush_space
xfs: flush delayed allcoation blocks on ENOSPC in create
xfs: block callers of xfs_flush_inodes() correctly
xfs: make inode flush at ENOSPC synchronous
xfs: use xfs_sync_inodes() for device flushing
xfs: inform the xfsaild of the push target before sleeping
xfs: prevent unwritten extent conversion from blocking I/O completion
xfs: fix double free of inode
xfs: validate log feature fields correctly
xfs_flush_inodes() currently uses a magic timeout to wait for
some inodes to be flushed before returning. This isn't
really reliable but used to be the best that could be done
due to deadlock potential of waiting for the entire flush.
Now the inode flush is safe to execute while we hold page
and inode locks, we can wait for all the inodes to flush
synchronously. Convert the wait mechanism to a completion
to do this efficiently. This should remove all remaining
spurious ENOSPC errors from the delayed allocation reservation
path.
This is extracted almost line for line from a larger patch
from Mikulas Patocka.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When we are writing to a single file and hit ENOSPC, we trigger a background
flush of the inode and try again. Because we hold page locks and the iolock,
the flush won't proceed until after we release these locks. This occurs once
we've given up and ENOSPC has been reported. Hence if this one is the only
dirty inode in the system, we'll get an ENOSPC prematurely.
To fix this, remove the async flush from the allocation routines and move
it to the top of the write path where we can do a synchronous flush
and retry the write again. Only retry once as a second ENOSPC indicates
that we really are ENOSPC.
This avoids a page cache deadlock when trying to do this flush synchronously
in the allocation layer that was identified by Mikulas Patocka.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently xfs_device_flush calls sync_blockdev() which is
a no-op for XFS as all it's metadata is held in a different
address to the one sync_blockdev() works on.
Call xfs_sync_inodes() instead to flush all the delayed
allocation blocks out. To do this as efficiently as possible,
do it via two passes - one to do an async flush of all the
dirty blocks and a second to wait for all the IO to complete.
This requires some modification to the xfs-sync_inodes_ag()
flush code to do efficiently.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Unwritten extent conversion can recurse back into the filesystem due
to memory allocation. Memory reclaim requires I/O completions to be
processed to allow the callers to make progress. If the I/O
completion workqueue thread is doing the recursion, then we have a
deadlock situation.
Move unwritten extent completion into it's own workqueue so it
doesn't block I/O completions for normal delayed allocation or
overwrite data.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (61 commits)
Revert "xfs: increase the maximum number of supported ACL entries"
xfs: cleanup uuid handling
xfs: remove m_attroffset
xfs: fix various typos
xfs: pagecache usage optimization
xfs: remove m_litino
xfs: kill ino64 mount option
xfs: kill mutex_t typedef
xfs: increase the maximum number of supported ACL entries
xfs: factor out code to find the longest free extent in the AG
xfs: kill VN_BAD
xfs: kill vn_atime_* helpers.
xfs: cleanup xlog_bread
xfs: cleanup xlog_recover_do_trans
xfs: remove another leftover of the old inode log item format
xfs: cleanup log unmount handling
Fix xfs debug build breakage by pushing xfs_error.h after
xfs: include header files for prototypes
xfs: make symbols static
xfs: move declaration to header file
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Remove two unneeded exports and make two symbols static in fs/mpage.c
Cleanup after commit 585d3bc06f
Trim includes of fdtable.h
Don't crap into descriptor table in binfmt_som
Trim includes in binfmt_elf
Don't mess with descriptor table in load_elf_binary()
Get rid of indirect include of fs_struct.h
New helper - current_umask()
check_unsafe_exec() doesn't care about signal handlers sharing
New locking/refcounting for fs_struct
Take fs_struct handling to new file (fs/fs_struct.c)
Get rid of bumping fs_struct refcount in pivot_root(2)
Kill unsharing fs_struct in __set_personality()
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags. There should be no functional change.
This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg. virtual_address to the
driver, which might be important in some special cases).
This is required for a subsequent fix. And will also make it easier to
merge page_mkwrite() with fault() in future.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hi.
I introduced "is_partially_uptodate" aops for XFS.
A page can have multiple buffers and even if a page is not uptodate,
some buffers can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read
after random write workloads can be optimized and we can get performance
improvement.
I did a performance test using the sysbench.
#sysbench --num-threads=4 --max-requests=100000 --test=fileio --file-num=1 \
--file-block-size=8K --file-total-size=1G --file-test-mode=rndrw \
--file-fsync-freq=0 --file-rw-ratio=0.5 run
-2.6.29-rc6
Test execution summary:
total time: 123.8645s
total number of events: 100000
total time taken by event execution: 442.4994
per-request statistics:
min: 0.0000s
avg: 0.0044s
max: 0.3387s
approx. 95 percentile: 0.0118s
-2.6.29-rc6-patched
Test execution summary:
total time: 108.0757s
total number of events: 100000
total time taken by event execution: 417.7505
per-request statistics:
min: 0.0000s
avg: 0.0042s
max: 0.3217s
approx. 95 percentile: 0.0118s
arch: ia64
pagesize: 16k
blocksize: 4k
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
The ino64 mount option adds a fixed offset to 32bit inode numbers
to bring them into the 64bit range. There's no need for this kind
of debug tool given that it's easy to produce real 64bit inode numbers
for testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
People continue to complain about this for weird reasons, but there's
really no point in keeping this typedef for a couple of users anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Remove this rather pointless wrapper and use is_bad_inode directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Two out of three are unused already, and the third is better done open-coded
with a comment describing what's going on here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Currently we unconditionally issue a flush from xfs_free_buftarg, but
since 2.6.29-rc1 this gives a warning in the style of
end_request: I/O error, dev vdb, sector 0
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix this sparse warnings:
fs/xfs/linux-2.6/xfs_ioctl.c:72:1: warning: symbol 'xfs_find_handle' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:249:1: warning: symbol 'xfs_open_by_handle' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:361:1: warning: symbol 'xfs_readlink_by_handle' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:496:1: warning: symbol 'xfs_attrmulti_attr_get' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:525:1: warning: symbol 'xfs_attrmulti_attr_set' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:555:1: warning: symbol 'xfs_attrmulti_attr_remove' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:657:1: warning: symbol 'xfs_ioc_space' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:1340:1: warning: symbol 'xfs_file_ioctl' was not declared. Should it be static?
fs/xfs/support/debug.c:65:1: warning: symbol 'xfs_fs_vcmn_err' was not declared. Should it be static?
fs/xfs/support/debug.c:112:1: warning: symbol 'xfs_hex_dump' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Instead of the keyword 'static' the macro 'STATIC' is used, so the
symbols are still global with CONFIG_XFS_DEBUG.
Fix this sparse warnings:
fs/xfs/linux-2.6/xfs_super.c:638:1: warning: symbol 'xfs_blkdev_get' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_super.c:655:1: warning: symbol 'xfs_blkdev_put' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_super.c:876:1: warning: symbol 'xfsaild' was not declared. Should it be static?
fs/xfs/xfs_bmap.c:6208:1: warning: symbol 'xfs_check_block' was not declared. Should it be static?
fs/xfs/xfs_dir2_leaf.c:553:1: warning: symbol 'xfs_dir2_leaf_check' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Currently we unconditionally issue a flush from xfs_free_buftarg, but
since 2.6.29-rc1 this gives a warning in the style of
end_request: I/O error, dev vdb, sector 0
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit d2859751cd.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit 95f8e302c0.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit d2859751cd.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit 95f8e302c0.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Currently we call from the nicely abstracted linux quotaops into a ugly
multiplexer just to split the calls out at the same boundary again.
Rewrite the quota ops handling to remove that obfucation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
xfs_create and xfs_mkdir only have minor differences, so merge both of them
into a sigle function. While we're at it also make the error handling code
more straight-forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Dave Chinner <david@fromorbit.com>
Just another set of types obsfucating the code, remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Remove the superflous igrab by keeping a reference on the path/file all the
time and clean up various bits of surrounding code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Splitting the task for a VFS-induced inode flush into two functions doesn't
make any sense, so merge the two functions dealing with it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Till VFS can correctly support read-only remount without racing,
use WARN_ON instead of BUG_ON on detecting transaction in flight
after quiescing filesystem.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Till VFS can correctly support read-only remount without racing,
use WARN_ON instead of BUG_ON on detecting transaction in flight
after quiescing filesystem.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
