Lately, mailbox callbacks have been replaced by notifier block
call chains, this needs to be changed in the users of mailbox,
otherwise compilation will break due to missing parameters.
For this new change to work, io_mbox_msg needs to be compatible
with the notifier_call definition.
Reported-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IVA MMU can manage up to 4GB of address space through its page tables,
given that it's L1 is divided into 1MB sections it requires at least
16KB for its table which represents 4096 entries of 32 bits each.
Previously, only 1GB was being handled by setting the page table size
to 4KB, any virtual address beyond of the L1 size used, would fall
into memory that does not belong to L1 translation tables, leading to
unpredictable results.
So, set the L1 table size to cover the entire MMU range (4GB) whether
is meant to be used or not.
Reported-by: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The OMAP powerdomain code and data is all OMAP2+-specific. This seems
unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h
to mach-omap2/powerdomain.h. The primary point of doing this is to remove
the temptation for unrelated upper-layer code to access powerdomain code
and data directly.
As part of this process, remove the references to powerdomain data
from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap.
Change the DSPBridge code to point to the new location for the
powerdomain headers. The DSPBridge code should not be including the
powerdomain headers; these should be removed.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
The OMAP clockdomain code and data is all OMAP2+-specific. This seems
unlikely to change any time soon. Move plat-omap/include/plat/clockdomain.h
to mach-omap2/clockdomain.h. The primary point of doing this is to remove
the temptation for unrelated upper-layer code to access clockdomain code
and data directly.
DSPBridge also uses the clockdomain headers for some reason, so,
modify it also. The DSPBridge code should not be including the
clockdomain headers; these should be removed.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Tested-by: Rajendra Nayak <rnayak@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
In preparation for adding OMAP4-specific PRCM accessor/mutator
functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific
files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been
moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was
OMAP2xxx/3xxx-specific.
This process also requires the #includes in each of these files to be
changed to reference the new file name. As part of doing so, add some
comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use
"sideways includes", to indicate that these users of the PRM/CM includes
should not be doing so.
Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this
patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Rajendra Nayak <rnayak@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
On 2.6.37-rc1, omap platform internals for SCM have changed,
so the build is broken again.
drivers/staging/tidspbridge/core/tiomap3430.c:26:
fatal error: plat/control.h: No such file or directory
This is a totally ugly layer violation, but needed until
omap_ctrl_set_dsp_boot*() are provided.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
This merges the staging-next tree to Linus's tree and resolves
some conflicts that were present due to changes in other trees that were
affected by files here.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the first hunk, 0 is returned on memory allocation failure, even though
other failures return -ENOMEM or other similar values.
In the second hunk, there was error handling code that returned without
freeing psz_path_name.
A simplified version of the semantic match that finds the first problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ret;
expression x,e1,e2,e3;
@@
ret = 0
... when != ret = e1
*x = \(kmalloc\|kcalloc\|kzalloc\)(...)
... when != ret = e2
if (x == NULL) { ... when != ret = e3
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
i was unsigned, so check for (i < 0) made no sense. Made it signed.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver uses ioremap on regular memory to get an uncached mapping,
which causes problems on ARMv6 and higher due to aliasing with the
cached linar kernel mapping.
Make sure this gets fixed before the driver graduates from staging.
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since the device name has changed use the new name to
bind the driver to it.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IOMMU module most be selected when using tidspbridge, because
now tidsbridge depends on iommu module.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now what iommu memory usage is kept track by iommu module
the functions reserve/unreserve_memory are not needed anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now iommv module keeps track of iommu memory used,
we do not need resource cleanup for reserved
memories anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't need to map iva2 iommu register base address
anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Create dsp-mmu module and moves all the iommu code related to
this module.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
hw directory was only being used for custom iommu implementation
APIs, so after the iommu module migration this directory is not
needed anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With changes for iommu migration mmufault report and dsp track
dump is broken, this patch fixes that.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes all the custom mmu code remaining in
tiomap3430.c which is not needed anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now these functions only map user space addresses to dsp virtual
addresses, so now the functions have a more meaningful name.
Also now user_to_dsp_map returns the mapped address.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now iommu maps of shared memory segments are done in
bridge_brd_start and unmaped in bridge_brd_stop.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now the tidspbridge uses the API's from
iovmm module.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DSP Bridge needs to disable the peripheral clocks when switches to
BRD_STOPPED since that would prevent the domain to enter in OFF state.
Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resendig this patch since it was missed in the last merge...
Remove find_lcm within nldr.c and use standard
kernel function lcm().
Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resending this patch since it was missed in the last merge...
Remove unnecessary cmm_xlator_delete function and use
kfree() kernel function directly.
Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The services_init() and services_exit() functions don't do anything,
so they are removed, and as these are the only two functions defined
in services.c and services.h, then these files are also removed.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
So far, the cfg.c file is empty, and the function prototypes in cfg.h
are not used in any place. So they can be removed.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
