Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of
XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode
that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an
xfs_dinode that embedds a xfs_dinode_core one will have to do endian
swapping while the other doesn't. Instead of having the current mess with
the CFORK macros that have byteswapping and non-byteswapping version
(which are inconsistantly named while we're at it) just define each family
of the macros to stand by itself and simplify the whole matter.
A few direct references to the CFORK variants were cleaned up to use IFORK
or DFORK to make this possible.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30163a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
There is no need to lock any page in xfs_buf.c because we operate on our
own address_space and all locking is covered by the buffer semaphore. If
we ever switch back to main blockdeive address_space as suggested e.g. for
fsblock with a similar scheme the locking will have to be totally revised
anyway because the current scheme is neither correct nor coherent with
itself.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30156a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30098a
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The BPCSHIFT based macros, btoc*, ctob*, offtoc* and ctooff are either not
used or don't need to be used. The NDPP, NDPP, NBBY macros don't need to
be used but instead are replaced directly by PAGE_SIZE and PAGE_CACHE_SIZE
where appropriate. Initial patch and motivation from Nicolas Kaiser.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30096a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This assert is bogus. We can have a forced shutdown occur
between the check for the XLOG_FORCED_SHUTDOWN and the ASSERT. Also, the
logging system shouldn't care about the state of XFS_FORCED_SHUTDOWN, it
should only check XLOG_FORCED_SHUTDOWN. The logging system has it's own
forced shutdown flag so, for the case of a forced shutdown that's not due
to a logging error, we can flush the log.
SGI-PV: 972985
SGI-Modid: xfs-linux-melb:xfs-kern:30029a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if
CONFIG_XFS_RT is off. This should be safe because mount checks in
xfs_rtmount_init:
so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be
encountered after that.
Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space,
presumeably gcc can optimize around the various "if (0)" type checks:
xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8
xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8
<-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4
xfs_qm_vop_chown_reserve -4
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30014a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Mount option parsing is platform specific. Move it out of core code into
the platform specific superblock operation file.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30012a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Implement the new generic callout for file preallocation. Atomically
change the file size if requested.
SGI-PV: 972756
SGI-Modid: xfs-linux-melb:xfs-kern:30009a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The log force added in xfs_iget_core() has been a performance issue since
it was introduced for tight loops that allocate then unlink a single file.
under heavy writeback, this can introduce unnecessary latency due tothe
log I/o getting stuck behind bulk data writes.
Fix this latency problem by avoinding the need for the log force by moving
the place we mark linux inode dirty to the transaction commit rather than
on transaction completion.
This also closes a potential hole in the sync code where a linux inode is
not dirty between the time it is modified and the time the log buffer has
been written to disk.
SGI-PV: 972753
SGI-Modid: xfs-linux-melb:xfs-kern:30007a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Prevent transaction overrun in xfs_iomap_write_allocate() if we race with
a truncate that overlaps the delalloc range we were planning to allocate.
If we race, we may allocate into a hole and that requires block
allocation. At this point in time we don't have a reservation for block
allocation (apart from metadata blocks) and so allocating into a hole
rather than a delalloc region results in overflowing the transaction block
reservation.
Fix it by only allowing a single extent to be allocated at a time.
SGI-PV: 972757
SGI-Modid: xfs-linux-melb:xfs-kern:30005a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
There are several mount options that don't show up in /proc/mounts. Add
them in and clean up the showargs code at the same time.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30004a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Sparse trips over the locking order in xlog_recover_do_efd_trans() when
xfs_trans_delete_ail() drops the ail lock. Because the unlock is
conditional, we need to either annotate with a "fake unlock" or change the
structure of the code so sparse thinks the function always unlocks.
Reordering the code makes it simpler, so do that.
SGI-PV: 972755
SGI-Modid: xfs-linux-melb:xfs-kern:30003a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
These are mostly locking annotations, marking things static, casts where
needed and declaring stuff in header files.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30002a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We need xfs_bulkstat() to report inode stat for inodes with link count
zero but reference count non zero.
The fix here:
http://oss.sgi.com/archives/xfs/2007-09/msg00266.html
changed this behavior and made xfs_bulkstat() to filter all unlinked
inodes including those that are not destroyed yet but held by reference.
The attached patch returns back to the original behavior by marking the
on-disk inode buffer "dirty" when di_mode is cleared (at that time both
inode link and reference counter are zero).
SGI-PV: 972004
SGI-Modid: xfs-linux-melb:xfs-kern:29914a
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS_IOC_GETVERSION, XFS_IOC_GETXFLAGS and XFS_IOC_SETXFLAGS all take a
"long" which changes size between 32 and 64 bit platforms.
So, the ioctl cmds that come in from a 32-bit app aren't as expected, for
example on GETXFLAGS,
unknown cmd fd(3) cmd(80046601){t:'f';sz:4}
due to the size mismatch.
So, use instead the 32-bit version of the commands for compat ioctls, and
other than that it doesn't take any more manipulation.
Also, for both native and compat versions, just define them to the values
as defined in fs.h
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29849a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
No need for xfs to have its own hex dumping routine now that the kernel
has one.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29847a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
This macro is unused an all other acros in this family operate on native
types, so we most likely won't grow a user either.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29846a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
There is no need to lock any page in xfs_buf.c because we operate on our
own address_space and all locking is covered by the buffer semaphore. If
we ever switch back to main blockdeive address_space as suggested e.g. for
fsblock with a similar scheme the locking will have to be totally revised
anyway because the current scheme is neither correct nor coherent with
itself.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29845a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Refactoring xfs_mountfs() to call sub-functions for logical chunks can
help save a bit of stack, and can make it easier to read this long
function.
The mount path is one of the longest common callchains, easily getting to
within a few bytes of the end of a 4k stack when over lvm, quotas are
enabled, and quotacheck must be done.
With this change on top of the other stack-related changes I've sent, I
can get xfs to survive a normal xfsqa run on 4k stacks over lvm.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29834a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Mostly trivial conversion with one exceptions: h_num_logops was kept in
native endian previously and only converted to big endian in xlog_sync,
but we always keep it big endian now. With todays cpus fast byteswap
instructions that's not an issue but the new variant keeps the code clean
and maintainable.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29821a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
- the various assign lsn macros are replaced by a single inline,
xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except
for a more sane calling convention. ASSIGN_LSN_DISK is replaced
by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same,
except we pass the cycle and block arguments explicitly instead of a
log paramter. The latter two variants only had 2, respectively one
user anyway.
- the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the
same calling conventions.
- GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away
the unused arch argument. Instead of conditional defintions
depending on host endianess we now do an unconditional swap and shift
then, which generates equal code.
- the unused XLOG_SET macro is removed.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29820a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
- the various assign lsn macros are replaced by a single inline,
xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except
for a more sane calling convention. ASSIGN_LSN_DISK is replaced
by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same,
except we pass the cycle and block arguments explicitly instead of a
log paramter. The latter two variants only had 2, respectively one
user anyway.
- the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the
same calling conventions.
- GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away
the unused arch argument. Instead of conditional defintions
depending on host endianess we now do an unconditional swap and shift
then, which generates equal code.
- the unused XLOG_SET macro is removed.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29819a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
No need to have a wrapper just two call two more functions.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29816a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Get rid of vnode useage in xfs_iget.c and pass Linux inode / xfs_inode
where apropinquate. And kill some useless helpers while we're at it.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29808a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_ioctl.c passes around vnode pointers quite a lot, but all places
already have the Linux inode which is identical to the vnode these days.
Clean the code up to always use the Linux inode.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29807a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
We were already filling the Linux struct statfs anyway, and doing this
trivial task directly in xfs_fs_statfs makes the code quite a bit cleaner.
While I was at it I also moved copying attributes that don't change over
the lifetime of the filesystem outside the superblock lock.
xfs_fs_fill_super used to get the magic number and blocksize through
xfs_statvfs, but assigning them directly is a lot cleaner and will save
some stack space during mount.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29802a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Just fill in struct kstat directly from the xfs_inode instead of doing a
detour through a bhv_vattr_t and xfs_getattr.
SGI-PV: 970980
SGI-Modid: xfs-linux-melb:xfs-kern:29770a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it
just duplicates fields already in xfs_inode, and there is nothing this
abstraction buys us on XFS/Linux. This patch removes it and shrinks source
and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44
bytes in debug/non-debug builds.
SGI-PV: 970852
SGI-Modid: xfs-linux-melb:xfs-kern:29754a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
remove spinlock init abstraction macro in spin.h, remove the callers, and
remove the file. Move no-op spinlock_destroy to xfs_linux.h Cleanup
spinlock locals in xfs_mount.c
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29751a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate XFS_SB_LOCK, remove XFS_SB_LOCK->mutex_lock->spin_lock
macros, call spin_lock directly, remove extraneous cookie holdover from
old xfs code, and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29746a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate dabuf_global_lock, remove mutex_lock->spin_lock macros, call
spin_lock directly, remove extraneous cookie holdover from old xfs code,
and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29744a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate pagb_lock, remove mutex_lock->spin_lock macros, call
spin_lock directly, remove extraneous cookie holdover from old xfs code,
and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29743a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate DQ_PINLOCK, remove DQ_PINLOCK->mutex_lock->spin_lock macros,
call spin_lock directly, remove extraneous cookie holdover from old xfs
code, and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29742a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate GRANT_LOCK, remove GRANT_LOCK->mutex_lock->spin_lock macros,
call spin_lock directly, remove extraneous cookie holdover from old xfs
code, and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29741a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate LOG_LOCK, remove LOG_LOCK->mutex_lock->spin_lock macros, call
spin_lock directly, remove extraneous cookie holdover from old xfs code,
and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29740a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Currently there is an indirection called ioops in the XFS data I/O path.
Various functions are called by functions pointers, but there is no
coherence in what this is for, and of course for XFS itself it's entirely
unused. This patch removes it instead and significantly reduces source and
binary size of XFS while making maintaince easier.
SGI-PV: 970841
SGI-Modid: xfs-linux-melb:xfs-kern:29737a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
No need to allocate a bhv_vattr_t on stack and call xfs_getattr to update
a few fields in the Linux inode from the XFS inode, just do it directly.
And yes, this function is in dire need of a better name and prototype,
I'll do in a separate patch, though.
SGI-PV: 970705
SGI-Modid: xfs-linux-melb:xfs-kern:29713a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
There is no reason to go through xfs_iomap for the BMAPI_UNWRITTEN because
it has nothing in common with the other cases. Instead check for the
shutdown filesystem in xfs_end_bio_unwritten and perform a direct call to
xfs_iomap_write_unwritten (which should be renamed to something more
sensible one day)
SGI-PV: 970241
SGI-Modid: xfs-linux-melb:xfs-kern:29681a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
There is no reason to go into the iomap machinery just to get the right
block device for an inode. Instead look at the realtime flag in the inode
and grab the right device from the mount structure.
I created a new helper, xfs_find_bdev_for_inode instead of opencoding it
because I plan to use it in other places in the future.
SGI-PV: 970240
SGI-Modid: xfs-linux-melb:xfs-kern:29680a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Simplify vnode tracing calls by embedding function name & return addr in
the calling macro.
Also do a lot of vnode->inode renaming for consistency, while we're at it.
SGI-PV: 970335
SGI-Modid: xfs-linux-melb:xfs-kern:29650a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
A large part of xfs_sync_inodes is conditional on the SYNC_BDFLUSH which
is never passed to it. This patch removes it and adds an assert that
triggers in case some new code tries to pass SYNC_BDFLUSH to it.
SGI-PV: 970242
SGI-Modid: xfs-linux-melb:xfs-kern:29630a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>