all rtl8192su chips have the 93c46 eprom. (no 93c56)
it it theoretically safe to remove the 93c56 definitions and some unneeded code.
if your device stops working after this patch, please send me a mail
and include some information about your device:
* dmesg
* lsusb -v
* _exact_ chipset (version)
* vendor
* everything else, that may help
plus cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
replaced if..else if..else by a switch.
this is hopefully easier to read.
plus cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
variable check_reset_cnt in rtl819x_watchdog_wqcallback is now static
again.
also, little cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
added a new function: FirmwareRequest92S
This function(instead of FirmwareDownload92S) is now responsible for
requesting the firmware.
FirmwareDownload92S is now easier to read, smaller and follows kernel
coding style.
plus cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
refactored EnableHWSecurityConfig8192 and setKey a bit by replacing
if...else if... else with switch...case
plus cosmetics
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The region set by the call to memset is immediately overwritten by the
subsequent call to memcpy.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2,e3,e4;
@@
- memset(e1,e2,e3);
memcpy(e1,e4,e3);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
removed extern keyword from rtl819x_watchdog_wqcallback.
removed static declaration from variable check_reset_cnt.
changed NumRxOkInPeriod and NumTxOkInPeriod comparison
in function rtl819x_watchdog_wqcallback to 666; we're not on windows.
plus cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
variable i is declared integer in rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail.
a few lines down it is re-declared u8.
removed the re-declaration.
plus cosmetics
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this is basically a port of Larry Fingers Patch for rtl8187se to rtl8192su.
also removed some dead code.
plus cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
There were a number of patches that went into Linus's
tree already that conflicted with other changes in the
staging branch. This merge resolves those merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
according to 'linux device drivers',
ENOENT, ECONNRESET, ESHUTDOWN are not real transmission errors.
also, a little cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Because the Firmware is loaded from RTL8192SU/rtl8192sfw.bin,
it it save, to remove it from r8192SU_HWImg.c
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtl8192* drivers in staging use semaphores, so they need
to #include <linux/semaphore.h>.
(similar to staging-rtl8187se-needs-semaphore.h.patch)
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2038: error: field 'ips_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2249: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2250: error: field 'scan_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:442: error: implicit declaration of function 'down'
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:500: error: implicit declaration of function 'up'
drivers/staging/rtl8192e/ieee80 211/ieee80211_softmac.c:3165: error: implicit declaration of function 'sema_init'
drivers/staging/rtl8192su/ieee80211/ieee80211.h:1330: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192su/ieee80211/ieee80211.h:1331: error: field 'scan_sem' has incomplete type
drivers/staging/rtl8192u/ieee80211/ieee80211.h:2010: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192u/ieee80211/ieee80211.h:2011: error: field 'scan_sem' has incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
String constants that are continued on subsequent lines with \
are not good.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make the initialization data also constant.
The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>
Signed-off-by: Németh Márton <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There was a buffer overflow in the original code. rf_path was 2 and it should
have been only 0 or 1.
I don't have the hardware for this, so I can't test it.
Looking at the code, there are two almost identical sections for updating the
hal variables. The first one was clearly wrong and had the array overflow as
well. The second one looked correct. I decided to use the second section as
is except for whitespace changes.
The differences between the two original sections:
1) The second one had more debug output.
2) The second one looped over rf_path instead of corrupting data.
3) The second one had these additional assigments.
if (rf_path == 0) {
priv->TxPowerLevelOFDM24G[i] = priv->RfTxPwrLevelOfdm1T[rf_path][i] ;
priv->TxPowerLevelCCK[i] = priv->RfTxPwrLevelCck[rf_path][i];
}
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jerry chuang <wlanfae@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sizeof() returns a size_t but the other types involved
are unsigned long, so using min() results in a warning.
As sizeof() is called on an 11 character buffer defined
immediately above unsigned long is obviously wide enough
for the result.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
$ gcc --version
gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
...
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBAReq’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:342: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBARsp’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:443: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_DELBA’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:573: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
...
Also some style fixes for these lines:
+ Fix excessively long lines
+ Remove leading space before struct
+ Remove unnecessary parentheses
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The prevailing idiom is to select WIRELESS_EXT not depend on it.
Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uncompiled. Doesn't currently build anyway.
Converted MAC_FMT to %pM
Converted some %02x%02x%02x%02x%02x%02x to %pm
Converted MAC_ARG to direct use
Removed MAC_FMT and MAC_ARG macros
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In wireless-testing, commit 7044cc56 added struct ieee80211_hdr_3addr
to include/linux/ieee80211.h. This definition collides with one that is
in the rtl8192su driver in staging.
The conflict is resolved by changing rtl8192su
to use the definition from include/linux/ieee80211.h.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The Hercules Wireless N USB mini (HWNUm-300) uses the RTL8191S chipset
and seems to work with this driver.
Signed-off-by: Stephane Glondu <steph@glondu.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch series fixes compilation problems that were caused by
function naming conflicts between the rtl8192su driver and the
mac80211 stack.
Signed-off-by: George Kadianakis <desnacked at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
"Definition" is misspelled "defintion" in several comments; this
patch fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These drivers can (erroneously) be enabled even when
CONFIG_NET=n, CONFIG_NETDEVICES=n, CONFIG_WLAN=n, etc.
Stop this.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On rtl81* additions, they had its wireless stack made builtin instead of
separated modules. But try_module_get/module_put in stack were kept,
they are uneeded with the stack builtin and makes rtl81* modules
impossible to remove on a system with an rtl81* card. request_module
calls are also uneeded with stack builtin, so remove them too.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some arches don't provide vmalloc.h through the includes already included
in rtl8192su. This patch adds it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch replaces uses of skb->tail with skb_tail_pointer(skb).
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sizeof(val) returns type unsigned long. count is already unsigned long, so
just use that. This fixes a compile warning.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes -fhard-float and the software float helpers. In-kernel
floating point is not allowed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
