This patch set a gap (4 bytes) between xattr entry and
name/value when xattr in bucket. This gap use to seperate
entry and name/value when a bucket is full. It had already
been set when xattr in inode/block.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
For other metadata in ocfs2, metaecc is checked in ocfs2_read_blocks
with io_mutex held. While for xattr bucket, it is calculated by
the whole buckets. So we have to add a spin_lock to prevent multiple
processes calculating metaecc.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ctime updating of xattr, it use the wrong type of access for
inode, so use ocfs2_journal_access_di instead.
Reported-and-Tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2_xattr_value_truncate, we may call b-tree codes which will
extend the journal transaction. It has a potential problem that it
may let the already-accessed-but-not-dirtied buffers gone. So we'd
better access the bucket after we call ocfs2_xattr_value_truncate.
And as for the root buffer for the xattr value, b-tree code will
acess and dirty it, so we don't need to worry about it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We must check whether ocfs2 volume support xattr in init_security,
if not support xattr and security is enable, would cause failure of mknod.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In extreme situation, may need xattr bucket for setting
security entry and acl entries during mknod. This only
happens when block size is too small.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We extend the credits for xattr's large value in set_value_outside
before, this can give rise to a credits issue when we set one security
entry and two acl entries duing mknod. As we remove extend_trans form
set_value_outside, we must calculate and reserve the credits for
xattr's large value in mknod.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When creating a xattr index block, the old calculation forget
to add credits for the meta change of the alloc file. So add
more credits and more comments to explain it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In xattr set, we should always update ctime if the operation goes
sucessfully. The old one mistakenly put it in ocfs2_xattr_set_entry
which is only called when we set xattr in inode or xattr block. The
side benefit is that it resolve the bug 1052 since in that scenario,
ocfs2_calc_xattr_set_need only calc out the xattr set credits while
ocfs2_xattr_set_entry update the inode also which isn't concerned with
the process of xattr set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Actually, when setting a new xattr value, we know it from the very
beginning, and it isn't like the extension of bucket in which case
we can't figure it out. So remove ocfs2_extend_trans in that function
and calculate it before the transaction. It also relieve acl operation
from the worry about the side effect of ocfs2_extend_trans.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Change the rest of the naked ocfs2_journal_access() calls in
fs/ocfs2/xattr.c to use the appropriate ocfs2_journal_access_*() call
for their metadata type.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_remove_value_outside() needs to know the type of buffer it is
looking at. Pass in an ocfs2_xattr_value_buf.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_xattr_set_entry is the function that knows what type of block it
is setting into. This is what we wanted from ocfs2_xattr_value_buf.
Plus, moving the value buf up into ocfs2_xattr_set_entry() allows us to
pass it into ocfs2_xattr_set_value_outside() and ocfs2_xattr_cleanup().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_xattr_update_entry() updates the entry portion of an xattr buffer.
This can be part of multiple metadata block types, so pass the buffer in
via an ocfs2_xattr_value_buf.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The callers of ocfs2_xattr_value_truncate() now pass in
ocfs2_xattr_value_bufs. These callers are the ones that calculated the
xv location, so they are the right starting point.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Place an ocfs2_xattr_value_buf in ocfs2_xattr_value_truncate() and pass
it down to ocfs2_xattr_shrink_size(). We can also pass it into
ocfs2_xattr_extend_allocation(), replacing its ocfs2_xattr_value_buf.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Place an ocfs2_xattr_value_buf in __ocfs2_xattr_shrink_size() and pass
it down to __ocfs2_remove_xattr_range().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When an ocfs2 extended attribute is large enough to require its own
allocation tree, we root it with an ocfs2_xattr_value_root. However,
these roots can be a part of inodes, xattr blocks, or xattr buckets.
Thus, they need a different journal access function for each container.
We wrap the bh, its journal access function, and the value root (xv) in
a structure called ocfs2_xattr_valu_buf. This is a package that can
be passed around. In this first pass, we simply pass it to the
extent tree code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The xattr bucket can span multiple blocks on disk. We have wrappers
for this structure in the code. We use the new multi-block ecc calls to
calculate and validate the bucket.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add block check calls to the read_block validate functions. This is the
almost all of the read-side checking of metaecc. xattr buckets are not checked
yet. Writes are also unchecked, and so a read-write mount will quickly fail.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Pass the actual target bucket for insert through to
ocfs2_add_new_xattr_bucket(). Now growing a bucket has no buffer_head
knowledge.
ocfs2_add_new_xattr_bucket() leavs xs->bucket in the proper state for
insert. However, it doesn't update the rest of the search fields in xs,
so we still have to relse() and re-find. That's OK, because everything
is cached.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Lift the buckets from ocfs2_add_new_xattr_cluster() up into
ocfs2_add_new_xattr_bucket(). Now ocfs2_add_new_xattr_cluster()
doesn't deal with buffer_heads. In fact, we no longer have to play
get_bh() tricks at all.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Lift the buckets from ocfs2_adjust_xattr_cross_cluster() up into
ocfs2_add_new_xattr_cluster(). Now ocfs2_adjust_xattr_cross_cluster()
doesn't deal with buffer_heads.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Now that ocfs2_adjust_xattr_cross_cluster() has buckets, it can pass
them into ocfs2_mv_xattr_bucket_cross_cluster(). It no longer has to
care about buffer_heads. The manipulation of first_bh and header_bh
moves up to ocfs2_adjust_xattr_cross_cluster().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We want to be passing around buckets instead of buffer_heads. Let's get
them into ocfs2_adjust_xattr_cross_cluster.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Now that ocfs2_mv_xattr_buckets() can move a partial cluster's worth of
buckets, ocfs2_mv_xattr_bucket_cross_cluster() can use it.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
If you look at ocfs2_mv_xattr_bucket_cross_cluster(), you'll notice that
two-thirds of the code is almost identical to ocfs2_mv_xattr_buckets().
The only difference is that ocfs2_mv_xattr_buckets() moves a whole
cluster's worth, while ocfs2_mv_xattr_bucket_cross_cluster() moves half
the cluster.
We change ocfs2_mv_xattr_buckets() to allow moving partial clusters.
The original caller of ocfs2_mv_xattr_buckets() still moves the whole
cluster's worth - it just passes a start_bucket of 0.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_cp_xattr_cluster() takes the last cluster of an xattr extent,
copies its buckets to the front of a new extent, and then shrinks the bucket
count of the original extent. So it's really moving the data, not
copying it.
While we're here, the function doesn't need a buffer_head for the old
extent, just the block number.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The buffer copy loop of ocfs2_mv_xattr_bucket_cross_cluster() actually
looks a lot like ocfs2_cp_xattr_bucket(). Let's just use that instead.
We also use bucket operations to update the buckets at the start of each
extent.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
I was unsure of the JOURNAL_ACCESS parameters in
ocfs2_cp_xattr_cluster(). They're based on the function argument
't_is_new', but I couldn't quite figure out how t_is_new mapped to
allocation. ocfs2_cp_xattr_cluster() actually overwrites the target,
regardless of t_is_new.
Well, I just figured it out. So I'm adding a big fat comment for those
who come after me. ocfs2_divide_xattr_cluster() has the same behavior.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_cp_xattr_cluster() takes the last bucket of a full extent and
copies it over to a new extent. It then updates the headers of both
extents to reflect the new state. It is passed the first bh of
the first bucket in order to update that first extent's bucket count.
It reads and dirties the first bh of the new extent for the same reason.
However, future code wants to always dirty the entire bucket when it
is changed. So it is changed to read the entire bucket it is updating
for both extents.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_extend_xattr_bucket() takes an extent of buckets and shifts some
of them down to make room for a new xattr. It is passed the first bh of
the first bucket, because that is where we store the number of buckets
in the extent.
However, future code wants to always dirty the entire bucket when it
is changed. So let's pass the entire bucket into this function, skip
any block reads (we have them), and add the access/dirty logic. We also
can skip passing in the target bucket bh - we only need its block
number.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We move the transaction into the loop because in
ocfs2_remove_extent, we will double the credits in function
ocfs2_extend_rotate_transaction. So if we have a large loop
number, we will soon waste much the journal space.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_bucket_value_truncate() currently takes the first bh of the
bucket, and magically plays around with the value bh - even though
the bucket structure in the calling function already has it.
In addition, future code wants to always dirty the entire bucket when it
is changed. So let's pass the entire bucket into this function, skip
any block reads (we have them), and add the access/dirty logic.
ocfs2_xattr_update_value_size() is no longer necessary, as it only did
one thing other than journal access/dirty.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add quota calls for allocation and freeing of inodes and space, also update
estimates on number of needed credits for a transaction. Move out inode
allocation from ocfs2_mknod_locked() because vfs_dq_init() must be called
outside of a transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
During an xattr set, when we move a xattr which was stored in inode to the
outside bucket, we have to delete it and it will use the old value of
xis->not_found. xis->not_found is removed by ocfs2_calc_xattr_set_need
though, so we must restore it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we extend one xattr's value to a large size, the old value size might
be smaller than the size of a value root. In those cases, we still need to
guess the metadata allocation.
Reported-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add an optional validation hook to ocfs2_read_blocks(). Now the
validation function is only called when a block was actually read off of
disk. It is not called when the buffer was in cache.
We add a buffer state bit BH_NeedsValidate to flag these buffers. It
must always be one higher than the last JBD2 buffer state bit.
The dinode, dirblock, extent_block, and xattr_block validators are
lifted to this scheme directly. The group_descriptor validator needs to
be split into two pieces. The first part only needs the gd buffer and
is passed to ocfs2_read_block(). The second part requires the dinode as
well, and is called every time. It's only 3 compares, so it's tiny.
This also allows us to clean up the non-fatal gd check used by resize.c.
It now has no magic argument.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We weren't consistently checking xattr blocks after we read them.
Most places checked the signature, but none checked xb_blkno or
xb_fs_signature. Create a toplevel ocfs2_read_xattr_block() that does
the read and the validation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We need to get the parent directories acls and let the new child inherit it.
To this, we add additional calculations for data/metadata allocation.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds POSIX ACL(access control lists) APIs in ocfs2. We convert
struct posix_acl to many ocfs2_acl_entry and regard them as an extended
attribute entry.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This function does the work of ocfs2_xattr_get under an open lock.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Security attributes must be set when creating a new inode.
We do this in three steps.
- First, get security xattr's name and value by security_operation
- Calculate and reserve the meta data and clusters needed by this security
xattr before starting transaction
- Finally, we set it before add_entry
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch add security xattr set/get/list APIs to
support security attributes in Ocfs2.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This function is used to set xattr's in a started transaction. It is only
called during inode creation inode for initial security/acl xattrs of the
new inode. These xattrs could be put into ibody or extent block, so xattr
bucket would not be use in this case.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In current ocfs2/xattr, the whole xattr set is divided into
many steps are many transaction are used, this make the
xattr set process isn't like a real transaction, so this
patch try to merge all the transaction into one. Another
benefit is that acl can use it easily now.
I don't merge the transaction of deleting xattr when we
remove an inode. The reason is that if we have a large number
of xattrs and every xattrs has large values(large enough
for outside storage), the whole transaction will be very
huge and it looks like jbd can't handle it(I meet with a
jbd complain once). And the old inode removal is also divided
into many steps, so I'd like to leave as it is.
Note:
In xattr set, I try to avoid ocfs2_extend_trans since if
the credits aren't enough for the extension, it will commit
all the dirty blocks and create a new transaction which may
lead to inconsistency in metadata. All ocfs2_extend_trans
remained are safe now.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
In ocfs2 xattr set, we reserve metadata and clusters in any place
they are needed. It is time-consuming and ineffective, so this
patch try to reserve metadata and clusters at the beginning of
ocfs2_xattr_set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Move clusters free process into dealloc context so that
they can be freed after the transaction.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When the first block of a bucket is filled up with xattr
entries, we normally extend the bucket. But if we are
just replace one xattr with small length, we don't need
to extend it. This is important since we will calculate
what we need before the transaction and in this situation
no resources will be allocated.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we call ocfs2_init_xattr_bucket, we deem that the new buffer head
will be written to disk immediately, so we just use sb_getblk. But in
some cases the buffer may have already been in ocfs2 uptodate cache,
so we only call ocfs2_set_buffer_uptodate if the buffer head isn't
in the cache.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
