Wrappers to the libtraceevent routines, so that we can further reduce
the surface contact perf builtins have with it.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rtmgzptvrifzjxqwb9vs6g1b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It basically traverses the hardware and software event name arrays
creating an evlist with all events, then it uses perf_evsel__name to
check that the name is the expected one.
With it I noticed this problem:
[root@sandy ~]# perf test 10
10: roundtrip evsel->name check:invalid or unsupported event: 'CPU-migrations'
Run 'perf list' for a list of valid events
FAILED!
Changed it to "cpu-migrations" in the software event arrays and it
worked.
This is to catch problems like the one reported by Joel Uckelman in
http://permalink.gmane.org/gmane.linux.kernel.perf.user/1016
Hardware cache events will be checked in the following patch.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5jskfkuqvf2fi257zmni0ftz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use same type for ids everywhere.
In case of writing to perf.data the size is u32. In pipe mode it is
limited to header.size (less than u16). Adding a size check here.
Size overflow due to casting shouldn't actually happen in practice, but
during development this may cause type missmatch warninngs/errors,
unifying types avoids this.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-2-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To replace the longer list_entry constructs for things that are widely
used:
perf_evlist__{first,last}(evlist)
perf_evsel__next(evsel)
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ng7azq26wg1jd801qqpcozwp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to update already defined event's attribute with
event modifier. This change will allow to use group modifier as
an update to the existing event modifiers.
Adding 'add' parameter to the parse_events__modifier_event function.
Calling it with 'add' = false/true, the event modifier is
initialized/updated respectively.
Added exclude_GH flag to evsel struct, because we need to remember
if one of 'GH' modifiers was used for event. The reason is that the
default settings for exclude_guest is 1 and during the group
modifier processing we have no other way of knowing if it was set
by default or by event modifier.
Keeping the current behaviour, that any event/group modifier reset
the defaults for exclude_host (0) and exclude_guest (1).
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-8peaey3e2qc9dwtkvzbi4wmx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already lookup the associated event_format when reading the perf.data
header, so that we can cache the tracepoint name in evsel->name, so do
it a little further and save the event_format itself, so that we can
avoid relookups in tools that need to access it.
Change the tools to take the most obvious advantage, when they were
using pevent_find_event directly. More work is needed for further
removing the need of a pointer to pevent, such as when asking for event
field values ("common_pid" and the other common fields and per
event_format fields).
This is something that was planned but only got actually done when
Andrey Wagin needed to do this lookup at perf_tool->sample() time, when
we don't have access to pevent (session->pevent) to use with
pevent_find_event().
Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-txkvew2ckko0b594ae8fbnyk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we need evsel->{attr.{sample_{id_all,type}},sample_size},
reducing the number of parameters tools have to pass.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wdtmgak0ihgsmw1brb54a8h4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't have to store it in the perf_session instance, because
in the future perf_session instances may have multiple evlists, each
with different sample_type/sizes.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ptod86fxkpgq3h62m9refkv4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that __event_name is gone, no need to export __perf_evsel__[hs]w_name().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rpjnarbt83nu9uowrfatmy12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't use global variables that could make us misreport event
names when having a multi window top, for instance.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mccancovi1u0wdkg8ncth509@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The modifiers:
k kernel space
u user space
h hypervisor
G guest
H host
p, pp, ppp precision level (PEBS)
that can be suffixed to an event were lost when tools used event_name()
to reconstruct them from the perf_event_attr entries in a perf.data
file.
Fix it by following the defaults used for these modifiers in the current
codebase, so:
$ perf record -e instructions:u usleep 1 2> /dev/null
$ perf evlist
instructions:u
$ perf record -e cycles:k usleep 1 2> /dev/null
$ perf evlist
cycles:k
$ perf record -e cycles:kh usleep 1 2> /dev/null
$ perf evlist
cycles:kh
$ perf record -e cache-misses:G usleep 1 2> /dev/null
$ perf evlist
cache-misses:G
$ perf record -e cycles:ppk usleep 1 2> /dev/null
$ perf evlist
cycles:kpp
$
Also works with 'top', 'report', etc.
More work needed to cover tracepoints and software events while not
dragging lots of baggage to the python binding, this is a minimal fix
for v3.5.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4hl5glle0hxlklw4usva1mkt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf diff command is broken since:
perf hists: Threaded addition and sorting of entries
commit 1980c2ebd7
Several places were broken:
- hists data need to be collected into opened sessions instead
of into events
- session's hists data need to be initialized properly when the
session is created
- hist_entry__pcnt_snprintf: the percentage and displacement
buffer preparation must not use 'ret' because it's used
as a pointer to the final buffer
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120322133726.GB1601@m.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When event group is enabled for forked task (i.e. no target task/cpu
was specified) all events were disabled and marked ->enable_on_exec.
However they wouldn't be counted at all since only group leader will
be enabled on exec actually.
In contrast to perf stat, perf record doesn't have a real problem
as it enables all the event before proceeding. But it needs to be
fixed anyway IMHO.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887340-32448-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code in 'perf record', so that we can share option parsing,
etc. Eventually will be used by 'perf top', but first 'trace' will use
it.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hzjqsgnte1esk90ytq0ap98v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __perf_evsel__open routing was grouping just the threads for that
specific events per cpu when we want to group all threads in all events
to the first fd opened on that cpu.
So pass the xyarray with the first event, where the other events will be
able to get that first per cpu fd.
At some point top and record will switch to using perf_evlist__open that
takes care of this detail and probably will also handle the fallback
from hw to soft counters, etc.
Reported-by: Deng-Cheng Zhu <dczhu@mips.com>
Tested-by: Deng-Cheng Zhu <dczhu@mips.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ebm34rh098i9y9v4cytfdp0x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes two more cases where the python binding would not load:
. Not finding die(), which it shouldn't anyway, not good to just stop the
world because some particular perf.data file is invalid, just propagate
the error to the caller.
. Not finding perf_sample_size: fix it by moving it from event.c to evsel,
where it belongs, as most cases are moving to operate on an evsel object.o
One of the fixed problems:
[root@emilia ~]# python
>>> import perf
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: perf_sample_size
>>>
[root@emilia ~]#
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1hkj7b2cvgbfnoizsekjb6c9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat doesn't mmap and its perfectly fine for it to use task-bound
counters with inheritance.
So set the attr.inherit on the caller and leave the syscall itself to
validate it.
When the mmap fails perf_evlist__mmap will just emit a warning if this
is the failure reason.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20110414170121.GC3229@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.
Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.
cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.
More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.
But the overall goal/trend is to more uniformly use evsels and evlists.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the way perf stat prints event names at the end of a
run. Until now, it was trying to reconstruct the event name from its
encoding. The problem is that it would only print generic events without
their modifiers (u, k, pp).
This patch saves the event name as passed by the user in the evsel
struct and uses it to print the final event name.
This would also work in case perf is linked with a library (such as
libpfm4) which provides full PMU event tables.
$ perf stat -e cycles:u,cycles:k date
Wed Feb 16 14:58:52 CET 2011
Performance counter stats for 'date':
568600 cycles:u
2779715 cycles:k
0.001908182 seconds time elapsed
Cc: Arun Sharma <arun@sharma-home.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer note: Fixed a merge problem with 023695d "Add cgroup support" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
They were on evsel.c because they came from refactoring existing evsel
methods, so, to make reviewing the changes easier, I kept it there, now
its a plain move.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the {con,des}structor, as in interpreted language bindings we will
need to go back from the wrapper object to the real thing. In that case
using container_of will save us to have an extra pointer in the perf_evsel
struct.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adopting the new model used in 'perf record', where we don't have a map
per thread per cpu, instead we have an mmap per cpu, established on the
first fd for that cpu and ask the kernel using the
PERF_EVENT_IOC_SET_OUTPUT ioctl to send events for the other fds on that
cpu for the one with the mmap.
The methods moved from perf_evsel to perf_evlist, but for easing review
they were modified in place, in evsel.c, the next patch will move the
migrated methods to evlist.c.
With this 'perf top' now uses the same mmap model used by 'perf record'
and the next patches will make 'perf record' use these new routines,
establishing a common codebase for both tools.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code in 'perf top'. Record is next in line.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is a per-cpu attribute, we can't set it up in advance and use it
for all the calls.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_evsel__open now have an extra boolean argument specifying if
event grouping is desired.
The first file descriptor created on a CPU becomes the group leader.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.
For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes the usage of the perf_event.h header file
between command modules and the supporting code in util.
It is necessary to ensure that ALL files use the SAME
perf_event.h header from the kernel source tree.
There were a couple of #include <linux/perf_event.h> mixed
with #include "../../perf_event.h".
This caused issues on some distros because of mismatch
in the layout of struct perf_event_attr. That eventually
led perf stat to segfault.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Abstracting away the loops needed to create the various event fd handlers.
The users have to pass a confiruged perf->evsel.attr field, which is already
usable after perf_evsel__new (constructor) time, using defaults.
Comes out of the ad-hoc routines in builtin-stat, that now uses it.
Fixed a small silly bug where we were die()ing before killing our
children, dysfunctional family this one 8-)
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making them hopefully generic enough to be used in 'perf test',
well see.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of ad-hoc code and global arrays with hard coded sizes.
This is the first step on having a library that will be first
used on regression tests in the 'perf test' tool.
[acme@felicio linux]$ size /tmp/perf.before
text data bss dec hex filename
1273776 97384 5104416 6475576 62cf38 /tmp/perf.before
[acme@felicio linux]$ size /tmp/perf.new
text data bss dec hex filename
1275422 97416 1392416 2765254 2a31c6 /tmp/perf.new
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
