Verify that the in-memory accounting verifies the on-disk accounting
after a clean shutdown.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Rewrite fsck/gc for the new accounting scheme.
This adds a second set of in-memory accounting counters for gc to use;
like with other parts of gc we run all trigger in TRIGGER_GC mode, then
compare what we calculated to existing in-memory accounting at the end.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Main part of the disk accounting rewrite.
This is a wholesale rewrite of the existing disk space accounting, which
relies on percepu counters that are sharded by journal buffer, and
rolled up and added to each journal write.
With the new scheme, every set of counters is a distinct key in the
accounting btree; this fixes scaling limitations of the old scheme,
where counters took up space in each journal entry and required multiple
percpu counters.
Now, in memory accounting requires a single set of percpu counters - not
multiple for each in flight journal buffer - and in the future we'll
probably also have counters that don't use in memory percpu counters,
they're not strictly required.
An accounting update is now a normal btree update, using the btree write
buffer path. At transaction commit time, we apply accounting updates to
the in memory counters, which are percpu counters indexed in an
eytzinger tree by the accounting key.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The output of mount options such as "metadata_target" in `/proc/mounts`
uses the full path to the device.
mount(8) from util-linux uses the output from `/proc/mounts` to pass
existing mount options when performing a remount, so bcachefs should
accept as input the same form that it prints as output.
Without this change:
$ mount -t bcachefs -o metadata_target=vdb /dev/vdb /mnt
$ strace mount -o remount /mnt
...
fsconfig(4, FSCONFIG_SET_STRING, "metadata_target", "/dev/vdb", 0) = -1 EINVAL (Invalid argument)
...
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On a new filesystem or device we have to allocate the journal with a
bump allocator, because allocation info isn't ready yet - but when
hot-adding a device that doesn't have a journal, we don't want to use
that path.
Reported-by: syzbot+24a867cb90d8315cccff@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's no reason for discards to be single threaded across all devices;
this will improve performance on multi device setups.
Additionally, making them per-device simplifies the refcounting on
bch_dev->io_ref; we now hold it for the duration that the discard path
is running, which fixes a race between the discard path and device
removal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_iter_init() needs to happen before key_cache_init(), to initialize
btree_trans_barrier
Reported-by: syzbot+3cca837c2183f8f6fcaf@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Split the workqueues for btree read completions and btree write
submissions; we don't want concurrency control on btree read
completions, but we do want concurrency control on write submissions,
else blocking in submit_bio() will cause a ton of kworkers to be
allocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
the btree key cache uses the srcu struct created/destroyed by
btree_iter.c; btree_iter needs to be exited last.
Reported-by: syzbot+3af9daea347788b15213@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is needed for the next patch - the write submit path has to be able
to allocate a replica bio even when we weren't able to get a ref on the
device.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't strictly guarantee that no pointers refer to nonexistent
devices - we attempt to, but we need to be safe when the filesystem is
corrupt.
Therefore, change device_add to try to pick a slot that's never been
used, or the slot that's been unused the longest.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now explicitly allocate and free the buckets_nouse bitmap - this is
going to be used for online fsck.
To go RW when we haven't check allocations, we'll do a much slimmed down
version that just initializes the buckets_nouse bitmaps.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since btree_ptr_v2, we no longer require the journal seq blacklist table
for skipping blacklisted bsets (btree node entries); the pointer to a
given node indicates how much data is present.
Therefore there's no longer any need for journal seq blacklist gc to
walk the btree - we can prune entries older than journal last_seq.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is a nice cleanup - and we've also been having problems with
kthread creation in the mount path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Combine iter/update/trigger/str_hash flags into a single enum, and
x-macroize them for a to_text() function later.
These flags are all for a specific iter/key/update context, so it makes
sense to group them together - iter/update/trigger flags were already
given distinct bits, this cleans up and unifies that handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Consolidate mark_superblock() and trans_mark_superblock(), like we did
with the other trigger paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The bucket_gens array is a single array allocation (one byte per
bucket), and kernel allocations are still limited to INT_MAX.
Check this limit to avoid failing the bucket_gens array allocation.
Reported-by: syzbot+b29f436493184ea42e2b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_dev_lookup() is supposed to take a ref on the device it returns, but
for_each_member_device() takes refs as it iterates,
for_each_member_device_rcu() does not.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a btree root or interior btree node goes bad, we're going to lose a
lot of data, unless we can recover the nodes that it pointed to by
scanning.
Fortunately btree node headers are fully self describing, and
additionally the magic number is xored with the filesytem UUID, so we
can do so safely.
This implements the scanning - next patch will rework topology repair to
make use of the found nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds opts.recovery_pass_limit, and redoes -o norecovery to make use
of it; this fixes some issues with -o norecovery so it can be safely
used for data recovery.
Norecovery means "don't do journal replay"; it's an important data
recovery tool when we're getting stuck in journal replay.
When using it this way we need to make sure we don't free journal keys
after startup, so we continue to overlay them: thus it needs to imply
retain_recovery_info, as well as nochanges.
recovery_pass_limit is an explicit option for telling recovery to exit
after a specific recovery pass; this is a much cleaner way of
implementing -o norecovery, as well as being a useful debug feature in
its own right.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This makes bch_sb_field_ext more consistent with the rest of -o
nochanges - we don't want to be varying other codepaths based on -o
nochanges, since it's used for testing in dry run mode; also fixes some
potential null ptr derefs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Currently, struct time_stats has the optional ability to quantize the
information that it collects. This is /probably/ useful for callers who
want to see quantized information, but it more than doubles the size of
the structure from 224 bytes to 464. For users who don't care about
that (e.g. upcoming xfs patches) and want to avoid wasting 240 bytes per
counter, split the two into separate pieces.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- eliminate the dependency on printbufs, so that we can lift
thread_with_file for use in xfs
- add a nonblocking parameter to stdio_redirect_printf(), and either
block if the buffer is full or drop it on the floor - don't buffer
infinitely
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Most bcachefs workqueues are used for completions, and should be
WQ_HIGHPRI - this helps reduce queuing delays, we want to complete
quickly once we can no longer signal backpressure by blocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds an option to disable kicking out devices when splitbrain is
detected - it seems there's some issues with splitbrain detection and
we're kicking out devices erronously.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There is a null-ptr-deref issue reported by kasan:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Call Trace:
<TASK>
bch2_fs_alloc+0x1092/0x2170 [bcachefs]
bch2_fs_open+0x683/0xe10 [bcachefs]
...
When initializing the name of bch_fs, it needs to dynamically alloc memory
to meet the length of the name. However, when name allocation failed, it
will cause a null-ptr-deref access exception in subsequent string copy.
Fix this issue by checking if name allocation is successful.
Fixes: 401ec4db63 ("bcachefs: Printbuf rework")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
