Some filesystems, instead of simply decrementing i_nlink, simply zero it
during an unlink operation. We need to catch these in addition to the
decrement operations.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OCFS2 does some operations on i_nlink, then reverts them if some of its
operations fail to complete. This does not fit in well with the
drop_nlink() logic where we expect i_nlink to stay at zero once it gets
there.
So, delay all of the nlink operations until we're sure that the operations
have completed. Also, introduce a small helper to check whether an inode
has proper "unlinkable" i_nlink counts no matter whether it is a directory
or regular inode.
This patch is broken out from the others because it does contain some
logical changes.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is mostly included for parity with dec_nlink(), where we will have some
more hooks. This one should stay pretty darn straightforward for now.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a filesystem decrements i_nlink to zero, it means that a write must be
performed in order to drop the inode from the filesystem.
We're shortly going to have keep filesystems from being remounted r/o between
the time that this i_nlink decrement and that write occurs.
So, add a little helper function to do the decrements. We'll tie into it in a
bit to note when i_nlink hits zero.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The code around vfs_create() in open_namei() is getting a bit too complex.
Right now, there is at least the reference count on the dentry, and the
i_mutex to worry about. Soon, we'll also have mnt_writecount.
So, break the vfs_create() call out of open_namei(), and into a helper
function. This duplicates the call to may_open(), but that isn't such a bad
thing since the arguments (acc_mode and flag) were being heavily massaged
anyway.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We're shortly going to be adding a bunch more permission checks in these
functions. That requires adding either a bunch of new if() conditions, or
some gotos. This patch collapses existing if()s and uses gotos instead to
prepare for the upcoming changes.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There were a few accounting data/macros that are used in CSA but are #ifdef'ed
inside CONFIG_BSD_PROCESS_ACCT. This patch is to change those ifdef's from
CONFIG_BSD_PROCESS_ACCT to CONFIG_TASK_XACCT. A few defines are moved from
kernel/acct.c and include/linux/acct.h to kernel/tsacct.c and
include/linux/tsacct_kern.h.
Signed-off-by: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This work is initially done by Zach Brown to add support for vectored aio.
These are the core changes for AIO to support
IOCB_CMD_PREADV/IOCB_CMD_PWRITEV.
[akpm@osdl.org: huge build fix]
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch cleans up generic_file_*_read/write() interfaces. Christoph
Hellwig gave me the idea for this clean ups.
In a nutshell, all filesystems should set .aio_read/.aio_write methods and use
do_sync_read/ do_sync_write() as their .read/.write methods. This allows us
to cleanup all variants of generic_file_* routines.
Final available interfaces:
generic_file_aio_read() - read handler
generic_file_aio_write() - write handler
generic_file_aio_write_nolock() - no lock write handler
__generic_file_aio_write_nolock() - internal worker routine
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch vectorizes aio_read() and aio_write() methods to prepare for
collapsing all aio & vectored operations into one interface - which is
aio_read()/aio_write().
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Michael Holzheu <HOLZHEU@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a file system becomes fragmented (using MythTV, for example), the
bigalloc window searching ends up causing huge performance problems. In a
file system presented by a user experiencing this bug, the file system was
90% free, but no 32-block free windows existed on the entire file system.
This causes the allocator to scan the entire file system for each 128k
write before backing down to searching for individual blocks.
In the end, finding a contiguous window for all the blocks in a write is an
advantageous special case, but one that can be found naturally when such a
window exists anyway.
This patch removes the bigalloc window searching, and has been proven to
fix the test case described above.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The other common disk-based file systems (I checked ext[23], xfs, jfs)
check to ensure that opens of files > 2 GB fail unless O_LARGEFILE is
specified. They check via generic_file_open or their own open routine.
ReiserFS doesn't have an f_op->open defined, and as such, it's possible to
open files > 2 GB without O_LARGEFILE.
This patch adds the f_op->open member to conform with the expected
behavior.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is the patch the three previous ones have been leading up to.
It changes the behavior of ReiserFS from loading and caching all the bitmaps
as special, to treating the bitmaps like any other bit of metadata and just
letting the system-wide caches figure out what to hang on to.
Buffer heads are allocated on the fly, so there is no need to retain pointers
to all of them. The caching of the metadata occurs when the data is read and
updated, and is considered invalid and uncached until then.
I needed to remove the vs-4040 check for performing a duplicate operation on a
particular bit. The reason is that while the other sites for working with
bitmaps are allowed to schedule, is_reusable() is called from do_balance(),
which will panic if a schedule occurs in certain places.
The benefit of on-demand bitmaps clearly outweighs a sanity check that depends
on a compile-time option that is discouraged.
[akpm@osdl.org: warning fix]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch moves the bitmap loading code from super.c to bitmap.c
The code is also restructured somewhat. The only difference between new
format bitmaps and old format bitmaps is where they are. That's a two liner
before loading the block to use the correct one. There's no need for an
entirely separate code path.
The load path is generally the same, with the pattern being to throw out a
bunch of requests and then wait for them, then cache the metadata from the
contents.
Again, like the previous patches, the purpose is to set up for later ones.
Update: There was a bug in the previously posted version of this that resulted
in corruption. The problem was that bitmap 0 on new format file systems must
be treated specially, and wasn't. A stupid bug with an easy fix.
This is hopefully the last fix for the disaster that is the reiserfs bitmap
patch set.
If a bitmap block was full, first_zero_hint would end up at zero since it
would never be changed from it's zeroed out value. This just sets it
beyond the end of the bitmap block. If any bits are freed, it will be
reset to a valid bit. When info->free_count = 0, then we already know it's
full.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Similar to the SB_JOURNAL cleanup that was accepted a while ago, this patch
uses a temporary variable for buffer head references from the bitmap info
array.
This makes the code much more readable in some areas.
It also uses proper reference counting, doing a get_bh() after using the
pointer from the array and brelse()'ing it later. This may seem silly, but a
later patch will replace the simple temporary variables with an actual read,
so the reference freeing will be used then.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a check in is_reusable to determine if a particular block is a bitmap
block. It verifies this by going through the array of bitmap block buffer
heads and comparing the block number to each one.
Bitmap blocks are at defined locations on the disk in both old and current
formats. Simply checking against the known good values is enough.
This is a trivial optimization for a non-production codepath, but this is the
first in a series of patches that will ultimately remove the buffer heads from
that array.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The ncp specific compat ioctls are clearly local to one file system, so the
code can better live there.
This version of the patch moves everything into the generic ioctl handler
and uses it for both 32 and 64 bit calls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conversion of booleans to: generic-boolean.patch (2006-08-23)
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conversion of booleans to: generic-boolean.patch (2006-08-23)
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conversion of booleans to: generic-boolean.patch (2006-08-23)
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the very low memory systems is in the init_bio call
scale parameter set to zero and it leads to creating
zero sized mempool.
This patch prevents pool_entries parameter become zero,
so the created pool have at least 1 entry.
Mempool with 0 entries lead to incorrect behaviour
of mempool_free. (Alloc requests are not waken up
and system stalls in mempool_alloc->ioschedule).
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove inclusions of linux/buffer_head.h that are no longer necessary due to the
transfer of a number of things out of there.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove inclusions of linux/mpage.h that are no longer necessary due to the
transfer of generic_writepages().
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the msdos device ioctl compat stuff from fs/compat_ioctl.c to the msdos
driver so that the msdos header file doesn't need to be included.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the Ext3 device ioctl compat stuff from fs/compat_ioctl.c to the Ext3
driver so that the Ext3 header file doesn't need to be included.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the Ext2 device ioctl compat stuff from fs/compat_ioctl.c to the Ext2
driver so that the Ext2 header file doesn't need to be included.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the ReiserFS device ioctl compat stuff from fs/compat_ioctl.c to the
ReiserFS driver so that the ReiserFS header file doesn't need to be included.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move common FS-specific ioctls from linux/ext2_fs.h to linux/fs.h as FS_IOC_*
and FS_IOC32_* and have the users of them use those as a base.
Also move the GETFLAGS/SETFLAGS flags to linux/fs.h as FS_*_FL macros, and then
have the other users use them as a base.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the loop device ioctl compat stuff from fs/compat_ioctl.c to the loop
driver so that the loop header file doesn't need to be included.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move __invalidate_device() from fs/inode.c to fs/block_dev.c so that it can
more easily be disabled when the block layer is disabled.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dissociate the generic_writepages() function from the mpage stuff, moving its
declaration to linux/mm.h and actually emitting a full implementation into
mm/page-writeback.c.
The implementation is a partial duplicate of mpage_writepages() with all BIO
references removed.
It is used by NFS to do writeback.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move blockdev_superblock extern declaration from fs/fs-writeback.c to a
headerfile and remove the dependence on it by wrapping it in a macro.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create a new header file, fs/internal.h, for common definitions local to the
sources in the fs/ directory.
Move extern definitions that should be in header files from fs/*.c to
fs/internal.h or other main header files where they span directories.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The AFS filesystem no longer needs to override its sync_page() op.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move some functions out of the buffering code that aren't strictly buffering
specific. This is a precursor to being able to disable the block layer.
(*) Moved some stuff out of fs/buffer.c:
(*) The file sync and general sync stuff moved to fs/sync.c.
(*) The superblock sync stuff moved to fs/super.c.
(*) do_invalidatepage() moved to mm/truncate.c.
(*) try_to_release_page() moved to mm/filemap.c.
(*) Moved some related declarations between header files:
(*) declarations for do_invalidatepage() and try_to_release_page() moved
to linux/mm.h.
(*) __set_page_dirty_buffers() moved to linux/buffer_head.h.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq_exit_lock is protecting two things now:
- The per-ioc rbtree of cfq_io_contexts
- The per-cfqd linked list of cfq_io_contexts
The per-cfqd linked list can be protected by the queue lock, as it is (by
definition) per cfqd as the queue lock is.
The per-ioc rbtree is mainly used and updated by the process itself only.
The only outside use is the io priority changing. If we move the
priority changing to not browsing the rbtree, we can remove any locking
from the rbtree updates and lookup completely. Let the sys_ioprio syscall
just mark processes as having the iopriority changed and lazily update
the private cfq io contexts the next time io is queued, and we can
remove this locking as well.
Signed-off-by: Jens Axboe <axboe@suse.de>
* git://oss.sgi.com:8090/xfs/xfs-2.6: (49 commits)
[XFS] Remove v1 dir trace macro - missed in a past commit.
[XFS] 955947: Infinite loop in xfs_bulkstat() on formatter() error
[XFS] pv 956241, author: nathans, rv: vapo - make ino validation checks
[XFS] pv 956240, author: nathans, rv: vapo - Minor fixes in
[XFS] Really fix use after free in xfs_iunpin.
[XFS] Collapse sv_init and init_sv into just the one interface.
[XFS] standardize on one sema init macro
[XFS] Reduce endian flipping in alloc_btree, same as was done for
[XFS] Minor cleanup from dio locking fix, remove an extra conditional.
[XFS] Fix kmem_zalloc_greedy warnings on 64 bit platforms.
[XFS] pv 955157, rv bnaujok - break the loop on EFAULT formatter() error
[XFS] pv 955157, rv bnaujok - break the loop on formatter() error
[XFS] Fixes the leak in reservation space because we weren't ungranting
[XFS] Add lock annotations to xfs_trans_update_ail and
[XFS] Fix a porting botch on the realtime subvol growfs code path.
[XFS] Minor code rearranging and cleanup to prevent some coverity false
[XFS] Remove a no-longer-correct debug assert from dio completion
[XFS] Add a greedy allocation interface, allocating within a min/max size
[XFS] Improve error handling for the zero-fsblock extent detection code.
[XFS] Be more defensive with page flags (error/private) for metadata
...
o As per ELF specifications, it looks like that elf note "namesz" field
contains the length of "name" including the size of null character. And
currently we are filling "namesz" without taking into the consideration
the null character size.
o Kexec-tools performs this check deligently hence I ran into the issue
while trying to open /proc/kcore in kexec-tools for some info.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This unlock/lock on a super-unlikely path isn't worth the kernel text.
Cc: Vadim Lobanov <vlobanov@speakeasy.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Perform a code cleanup against the expand_fdtable() and expand_files()
functions inside fs/file.c. It aims to make the flow of code within these
functions simpler and easier to understand, via added comments and modest
refactoring.
Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patches solve the following problem: We want to grant access to devices
based on who is logged in from where, etc. This includes switching back and
forth between multiple user sessions, etc.
Using ACLs to define device access for logged-in users gives us all the
flexibility we need in order to fully solve the problem.
Device special files nowadays usually live on tmpfs, hence tmpfs ACLs.
Different distros have come up with solutions that solve the problem to
different degrees: SUSE uses a resource manager which tracks login sessions
and sets ACLs on device inodes as appropriate. RedHat uses pam_console, which
changes the primary file ownership to the logged-in user. Others use a set of
groups that users must be in in order to be granted the appropriate accesses.
The freedesktop.org project plans to implement a combination of a
console-tracker and a HAL-device-list based solution to grant access to
devices to users, and more distros will likely follow this approach.
These patches have first been posted here on 2 February 2005, and again
on 8 January 2006. We have been shipping them in SLES9 and SLES10 with
no problems reported. The previous submission is archived here:
http://lkml.org/lkml/2006/1/8/229http://lkml.org/lkml/2006/1/8/230http://lkml.org/lkml/2006/1/8/231
This patch:
Add some infrastructure for access control lists on in-memory
filesystems such as tmpfs.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
POSIX states that poll() shall fail with EINVAL if nfds > OPEN_MAX. In
this context, POSIX is referring to sysconf(OPEN_MAX), which is the value
of current->signal->rlim[RLIMIT_NOFILE].rlim_cur in the linux kernel, not
the compile-time constant which happens to also be named OPEN_MAX. In the
current code, an application may poll up to max_fdset file descriptors,
even if this exceeds RLIMIT_NOFILE. The current code also breaks
applications which poll more than max_fdset descriptors, which worked circa
2.4.18 when the check was against NR_OPEN, which is 1024*1024. This patch
enforces the limit precisely as POSIX defines, even if RLIMIT_NOFILE has
been changed at run time with ulimit -n.
To elaborate on the rationale for this, there are three cases:
1) RLIMIT_NOFILE is at the default value of 1024
In this (default) case, the patch changes nothing. Calls with nfds > 1024
fail with EINVAL both before and after the patch, and calls with nfds <=
1024 pass the check both before and after the patch, since 1024 is the
initial value of max_fdset.
2) RLIMIT_NOFILE has been raised above the default
In this case, poll() becomes more permissive, allowing polling up to
RLIMIT_NOFILE file descriptors even if less than 1024 have been opened.
The patch won't introduce new errors here. If an application somehow
depends on poll() failing when it polls with duplicate or invalid file
descriptors, it's already broken, since this is already allowed below 1024,
and will also work above 1024 if enough file descriptors have been open at
some point to cause max_fdset to have been increased above nfds.
3) RLIMIT_NOFILE has been lowered below the default
In this case, the system administrator or the user has gone out of their
way to protect the system from inefficient (or malicious) applications
wasting kernel memory. The current code allows polling up to 1024 file
descriptors even if RLIMIT_NOFILE is much lower, which is not what the user
or administrator intended. Well-written applications which only poll
valid, unique file descriptors will never notice the difference, because
they'll hit the limit on open() first. If an application gets broken
because of the patch in this case, then it was already poorly/maliciously
designed, and allowing it to work in the past was a violation of POSIX and
a DoS risk on low-resource systems.
With this patch, poll() will permit exactly what POSIX suggests, no more,
no less, and for any run-time value set with ulimit -n, not just 256 or
1024. There are existing apps which which poll a large number of file
descriptors, some of which may be invalid, and if those numbers stradle
1024, they currently fail with or without the patch in -mm, though they
worked fine under 2.4.18.
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace current->fs by fs helper variable to reduce some indirection
overhead and (at least at the moment, before the current_thread_info() %gs
PDA improvement is available) get rid of more costly current references.
Reduces fs/namei.o from 37786 to 37082 Bytes (704 Bytes saved).
[akpm@osdl.org: cleanup]
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If register_filesystem() fails mux workqueue must be killed.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@lanl.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It always returns 0, so relying on it is useless. The only caller isn't
checking return value. In general, un-, de-, -free functions should return
void.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If register_filesystem() fails, vxfs_inode cache must be destroyed.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
At the beginning of the routine, "copied" is set to 0, but it is no good
because in lines 805 and 812 it is set to other values. Finally, the
routine returns as if it copied 12 (=ENOMEM) bytes less than it actually
did.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the case below we are locking the whole disk not a partition. This
change simply brings the code in line with the piece above where when we
are the 'first' opener, and we are a partition.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
During testing I've found that the mount pending flag can be left set at
exit from autofs4_lookup after a failed mount request. This shouldn't be
allowed to happen and causes incorrect error returns.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The check for an empty directory in the autofs4_follow_link method fails
occassionally due to old dentrys. We had the same problem
autofs4_revalidate ages ago. I thought we wouldn't need this in
autofs4_follow_link, silly me.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There was an I/O error that prevented reading the last partial block of
large files in an ISO9660 filesystem. The error was generated when a file
comprised more than one section and had a size that was not an exact
multiple of the filesystem block size. This patch removes the check (and
failure) for reading into the last partial block (and possibly beyond) for
multiple-section files.
It worked in my testing to prevent reading beyond the end of the section;
my first patch just incremented the sect_size block count for a partial
block and continued doing the check. But there is a commment in the source
code about reading beyond the end of the file to fill a page cache.
Failing to access beyond the section would prevent reading beyond the end
of the file.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dquot passes the tty to tty_write_message without locking
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_each_thread() is rcu-safe, and all tasks which use this ->mm must sleep
in wait_for_completion(&mm->core_done) at this point, so we can use RCU
locks.
Also, remove unneeded INIT_LIST_HEAD(new) before list_add(new, head).
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_each_thread() is rcu-safe, and all tasks which use this ->mm must sleep
in wait_for_completion(&mm->core_done) at this point, so we can use RCU
locks.
Also, remove unneeded INIT_LIST_HEAD(new) before list_add(new, head).
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The problem is that close() syscalls can call a file system's flush
handler, which in turn might sleep interruptibly and ultimately pass back
an -ERESTARTSYS return value. This happens for files backed by an
interruptible NFS mount under nfs_file_flush() when a large file has just
been written and nfs_wait_bit_interruptible() detects that there is a
signal pending.
I have a test case where the "strace" command is used to attach to a
process sleeping in such a close(). Since the SIGSTOP is forced onto the
victim process (removing it from the thread's "blocked" mask in
force_sig_info()), the RPC wait is interrupted and the close() is
terminated early.
But the file table entry has already been cleared before the flush handler
was called. Thus, when the syscall is restarted, the file descriptor
appears closed and an EBADF error is returned (which is wrong). What's
worse, there is the hypothetical case where another thread of a
multi-threaded application might have reused the file descriptor, in which
case that file would be mistakenly closed.
The bottom line is that close() syscalls are not restartable, and thus
-ERESTARTSYS return values should be mapped to -EINTR. This is consistent
with the close(2) manual page. The fix is below.
Signed-off-by: Ernie Petrides <petrides@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The code in __register_chrdev_region checks that if the driver wishing to
register has the same major as an existing driver the new minor range is
strictly less than the existing minor range. However, it does not also
check that the new minor range is strictly greater than the existing minor
range. That is, if driver X has registered with major=x and minor=0-3,
__register_chrdev_region will allow driver Y to register with major=x and
minor=1-4.
Signed-off-by: Amos Waterland <apw@us.ibm.com>
Cc: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixed race on put_files_struct on exec with proc. Restoring files on
current on error path may lead to proc having a pointer to already kfree-d
files_struct.
->files changing at exit.c and khtread.c are safe as exit_files() makes all
things under lock.
Found during OpenVZ stress testing.
[akpm@osdl.org: add export]
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fat is commonly used on removable media. Mounting with -o flush tells the
FS to write things to disk as quickly as possible. It is like -o sync, but
much faster (and not as safe).
Signed-off-by: Chris Mason <mason@suse.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[assuming BSD security levels are deleted]
The only user of i_security, f_security, s_security fields is SELinux,
however, quite a few security modules are trying to get into kernel.
So, wrap them under CONFIG_SECURITY. Adding config option for each
security field is likely an overkill.
Following Stephen Smalley's suggestion, i_security initialization is
moved to security_inode_alloc() to not clutter core code with ifdefs
and make alloc_inode() codepath tiny little bit smaller and faster.
The user of (highly greppable) struct fown_struct::security field is
still to be found. I've checked every "fown_struct" and every "f_owner"
occurence. Additionally it's removal doesn't break i386 allmodconfig
build.
struct inode, struct file, struct super_block, struct fown_struct
become smaller.
P.S. Combined with two reiserfs inode shrinking patches sent to
linux-fsdevel, I can finally suck 12 reiserfs inodes into one page.
/proc/slabinfo
-ext2_inode_cache 388 10
+ext2_inode_cache 384 10
-inode_cache 280 14
+inode_cache 276 14
-proc_inode_cache 296 13
+proc_inode_cache 292 13
-reiser_inode_cache 336 11
+reiser_inode_cache 332 12 <=
-shmem_inode_cache 372 10
+shmem_inode_cache 368 10
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ReiserFS does periodic cleanup of old transactions in order to limit the
length of time a journal replay may take after a crash. Sometimes, writing
metadata from an old (already committed) transaction may require committing
a newer transaction, which also requires writing all data=ordered buffers.
This can cause very long stalls on journal_begin.
This patch makes sure new transactions will not need to be committed before
trying a periodic reclaim of an old transaction. It is low risk because if
a bad decision is made, it just means a slightly longer journal replay
after a crash.
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
make sure that reiserfs_fsync only triggers barriers when mounted with -o
barrier=flush
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's a bug where a UDF_PART_FLAG_READ_ONLY udf partition gets mounted
read-write, then subsequent problems happen; files seem to be able to be
removed, but file creation results in EIO or worse, oops.
EIO is coming from udf_new_block(), which returns EIO if the right flags
aren't set; only UDF_PART_FLAG_READ_ONLY is set in this case. We probably
s hould not have gotten this far...
Attached patch seems to fix it - and includes a printk to alert the user
that their "rw" mount request has been converted to "ro."
Here's the testcase I used:
[root@magnesium ~]# mkisofs -R -J -udf -o testiso /tmp/
...
Total translation table size: 0
Total rockridge attributes bytes: 342923
Total directory bytes: 382312
Path table size(bytes): 104
Max brk space used 103000
105059 extents written (205 MB)
[root@magnesium ~]# mount -o loop testiso /mnt/test/
[root@magnesium ~]# ls /mnt/test/fsfile
/mnt/test/fsfile
[root@magnesium ~]# rm /mnt/test/fsfile
[root@magnesium ~]# ls /mnt/test/fsfile
ls: /mnt/test/fsfile: No such file or directory
[root@magnesium ~]# touch /mnt/test/fsfile
touch: cannot touch `/mnt/test/fsfile': Input/output error
[root@magnesium tmp]# grep udf /proc/mounts
/dev/loop1 /mnt/test udf rw 0 0
Force readonly mounts of UDF partitions marked as read-only.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The on-disk data structures from AIX are not known, also the filesystem
layout is not known. There is a msdos partition signature at the end of
the first block, and the kernel recognizes 3 small (and overlapping)
partitions. But they are not usable. Maybe the firmware uses it to find
the bootloader for AIX, but AIX boots also if the first block is cleared.
This is the content of the partition table:
# dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) | xxd
0000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0000010: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8...
0000020: 00ff ffff 41ff ffff 0211 0000 1900 0000 ....A...........
0000030: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8...
Handle the whole disk as empty disk.
This fixes also YaST which compares the output from parted (and formerly
fdisk) with /proc/partitions. fdisk recognizes the AIX label since a long
time, SuSE has a patch for parted to handle the disk label as unknown.
dmesg will look like this:
sda: [AIX] unknown partition table
Tested on an IBM B50 with AIX V4.3.3.
Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Albert Cahalan <acahalan@gmail.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the "operation does permission checking" model used by fuse, chdir
permission is not checked, since there's no chdir method.
For this case set a lookup flag, which will be passed to ->permission(), so
fuse can distinguish it from permission checks for other operations.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some filesystems may want to report different values depending on the path
within the filesystem, i.e. one mount is actually several filesystems. This
can be the case for a network filesystem exported by an unprivileged server
(e.g. sshfs).
This is now possible, thanks to David Howells "VFS: Permit filesystem to
perform statfs with a known root dentry" patch.
This change is backward compatible, so no need to change interface version.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Files supported by fs/proc/base.c, i.e. /proc/<pid>/*, are not capable of
meeting the validity checks in ELF load_elf_*() handling because they have
no mmap handler which is required by ELF. In order to stop a.out
executables being used as part of an exploit attack against /proc-related
vulnerabilities, we make a.out executables depend on ->mmap() existing.
Signed-off-by: Eugene Teo <eteo@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
grab_super gets called with sb_lock held, and releases it. Add a lock
annotation to this function so that sparse can check callers for lock
pairing, and so that sparse will not complain about this function since it
intentionally uses the lock in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
hugetlbfs_forget_inode releases inode_lock. Add a lock annotation to this
function so that sparse can check callers for lock pairing, and so that
sparse will not complain about this functions since it intentionally uses
the lock in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
request_end and fuse_read_interrupt release fc->lock. Add lock annotations
to these two functions so that sparse can check callers for lock pairing,
and so that sparse will not complain about these functions since they
intentionally use locks in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
afs_proc_cell_servers_start acquires a lock, and afs_proc_cell_servers_stop
releases that lock. Add lock annotations to these two functions so that
sparse can check callers for lock pairing, and so that sparse will not
complain about these functions since they intentionally use locks in this
manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Only compile with -O1 if the (very old) compiler is broken. We use
reiserfs alot since SLES9 on ppc64, and it was never seen with gcc33.
Assume the broken gcc is gcc-3.4 or older.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the unnecessary PageUptodate check from simple_readpage. The only
two callers for ->readpage that don't have explicit PageUptodate check are
read_cache_pages and page_cache_read which operate on newly allocated pages
which don't have the flag set.
[akpm: use the allegedly-faster clear_page(), too]
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check driver layer errors.
Fix from: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
In blockdevc-check-errors.patch, add_bd_holder() is modified to return error
values when some of its operation failed. Among them, it returns -EEXIST when
a given bd_holder object already exists in the list.
However, in this case, the function completed its work successfully and need
no action by its caller other than freeing unused bd_holder object. So I
think it's better to return success after freeing by itself.
Otherwise, bd_claim-ing with same claim pointer will fail.
Typically, lvresize will fails with following message:
device-mapper: reload ioctl failed: Invalid argument
and you'll see messages like below in kernel log:
device-mapper: table: 254:13: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
Similarly, it should not add bd_holder to the list if either one of symlinking
fails. I don't have a test case for this to happen but it should cause
dereference of freed pointer.
If a matching bd_holder is found in bd_holder_list, add_bd_holder() completes
its job by just incrementing the reference count. In this case, it should be
considered as success but it used to return 'fail' to let the caller free
temporary bd_holder. Fixed it to return success and free given object by
itself.
Also, if either one of symlinking fails, the bd_holder should not be added to
the list so that it can be discarded later. Otherwise, the caller will free
bd_holder which is in the list.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We leak a bh ref in "journal_init_dev()" in case of failure.
Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's always good to make symbols static when we can, and this also eliminates
the need to rename the function in jbd2
Suggested by Eric Sandeen.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
The following patches reduce the size of the VFS inode structure by 28 bytes
on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction
in the inode size on a UP kernel that is configured in a production mode
(i.e., with no spinlock or other debugging functions enabled; if you want to
save memory taken up by in-core inodes, the first thing you should do is
disable the debugging options; they are responsible for a huge amount of bloat
in the VFS inode structure).
This patch:
The filesystem or device-specific pointer in the inode is inside a union,
which is pretty pointless given that all 30+ users of this field have been
using the void pointer. Get rid of the union and rename it to i_private, with
a comment to explain who is allowed to use the void pointer. This is just a
cleanup, but it allows us to reuse the union 'u' for something something where
the union will actually be used.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
The previous attempts to fix the linux inode use-after-free in xfs_iunpin
simply made the problem harder to hit. We actually need complete exclusion
between xfs_reclaim and xfs_iunpin, as well as ensuring that the i_flags
are consistent during both of these functions. Introduce a new spinlock
for exclusion and the i_flags, and fix up xfs_iunpin to use igrab before
marking the inode dirty.
SGI-PV: 952967
SGI-Modid: xfs-linux-melb:xfs-kern:26964a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
One sema to rule them all, one sema to find them...
SGI-PV: 907752
SGI-Modid: xfs-linux-melb:xfs-kern:26911a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
space for the unmount record - which becomes a problem in the freeze/thaw
scenario.
SGI-PV: 942533
SGI-Modid: xfs-linux-melb:xfs-kern:26815a
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_trans_delete_ail
xfs_trans_update_ail and xfs_trans_delete_ail get called with the AIL lock
held, and release it. Add lock annotations to these two functions so that
sparse can check callers for lock pairing, and so that sparse will not
complain about these functions since they intentionally use locks in this
manner.
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26807a
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
handling.
SGI-PV: 955302
SGI-Modid: xfs-linux-melb:xfs-kern:26804a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
one page.
SGI-PV: 955302
SGI-Modid: xfs-linux-melb:xfs-kern:26800a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
list, to increase our potential readahead window and in turn improve
bulkstat performance.
SGI-PV: 944409
SGI-Modid: xfs-linux-melb:xfs-kern:26607a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
batches of inode cluster buffers at once, before any blocking reads are
issued.
SGI-PV: 944409
SGI-Modid: xfs-linux-melb:xfs-kern:26606a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
extract inline attributes out of the bulkstat buffer (for that case),
rather than using an (extremely expensive for large icount filesystems)
iget for fetching attrs.
SGI-PV: 944409
SGI-Modid: xfs-linux-melb:xfs-kern:26602a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
current kernels
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26564a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
__be64 and let the callers use the proper macros.
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26560a
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
handling with sparse now, no need for comments.
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26557a
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
used for ondisk values.
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26553a
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Avoids doing an unnecessary inode to vnode conversion and avoids a memory
allocation.
SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26492a
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
analysis.
Under a sequential create+allocate workload, blktrace reported backward
writes being issued by xfsbufd, and frequent inappropriate queue unplugs.
We now insert at the tail when moving from the delwri lists to the temp
lists, which maintains correct ordering, and we avoid unplugging queues
deep in the submit paths when we'd shortly do it at a higher level anyway.
blktrace now reports much healthier write patterns from xfsbufd for this
workload (and likely many others).
SGI-PV: 954310
SGI-Modid: xfs-linux-melb:xfs-kern:26396a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
"inode => vnode => inode" conversion, but only flags and mode of final
inode are looked at. Pass original inode instead.
SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26395a
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The Makefile had the wrong CONFIG_ variable in it so that in
case GFS2 was y and the lock modules were m, they were not
getting built properly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Ingo Oeser pointed out that because current expands to an inline function
it is more space efficient and somewhat faster to simply keep a cached copy
of current in another variable. This patch implements that for the
de_thread function.
(akpm: saves nearly 100 bytes of text on x86)
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In de_thread we move pids from one process to another, a rather ugly case.
The function transfer_pid makes it clear what we are doing, and makes the
action atomic. This is useful we ever want to atomically traverse the
process group and session lists, in a rcu safe manner.
Even if the atomic properties this change should be a win as transfer_pid
should be less code to execute than executing both attach_pid and
detach_pid, and this should make de_thread slightly smaller as only a
single function call needs to be emitted. The only downside is that the
code might be slower to execute as the odds are against transfer_pid being
in cache.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since sys_sysctl is deprecated start allow it to be compiled out. This
should catch any remaining user space code that cares, and paves the way
for further sysctl cleanups.
[akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since the nolargeio option no longer has any effect, print a warning
instead of setting a write-only variable.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Cc: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the i_cdev pointer in struct inode into a union.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the i_bdev pointer in struct inode into a union.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patches reduce the size of the VFS inode structure by 28 bytes
on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction
in the inode size on a UP kernel that is configured in a production mode
(i.e., with no spinlock or other debugging functions enabled; if you want to
save memory taken up by in-core inodes, the first thing you should do is
disable the debugging options; they are responsible for a huge amount of bloat
in the VFS inode structure).
This patch:
The filesystem or device-specific pointer in the inode is inside a union,
which is pretty pointless given that all 30+ users of this field have been
using the void pointer. Get rid of the union and rename it to i_private, with
a comment to explain who is allowed to use the void pointer. This is just a
cleanup, but it allows us to reuse the union 'u' for something something where
the union will actually be used.
[judith@osdl.org: powerpc build fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Judith Lebzelter <judith@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
get_blocks() was removed. So, this removes it on fat, and will take
advantage of the multi block mapping.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For a long time now I have had a problem with not being able to return a
lookup failure on an existsing directory. In autofs this corresponds to a
mount failure on a autofs managed mount entry that is browsable (and so the
mount point directory exists).
While this problem has been present for a long time I've avoided resolving
it because it was not very visible. But now that autofs v5 has "mount and
expire on demand" of nested multiple mounts, such as is found when mounting
an export list from a server, solving the problem cannot be avoided any
longer.
I've tried very hard to find a way to do this entirely within the autofs4
module but have not been able to find a satisfactory way to achieve it.
So, I need to propose a change to the VFS.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the fallback arch_vma_name() to a sensible place (kernel/signal.c).
Currently it's in fs/proc/task_mmu.c, a file that is dependent on both
CONFIG_PROC_FS and CONFIG_MMU being enabled, but it's used from
kernel/signal.c from where it is called unconditionally.
[akpm@osdl.org: build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement /proc/pid/maps for NOMMU by reading the vm_area_list attached to
current->mm->context.vmlist.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Set the backing device info capabilities for /dev/mem and /dev/kmem to
permit direct sharing under no-MMU conditions and full mapping capabilities
under MMU conditions. Make the BDI used by these available to all directly
mappable character devices.
Also comment the capabilities for /dev/zero.
[akpm@osdl.org: ifdef reductions]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Rougly half of callers already do it by not checking return value
* Code in drivers/acpi/osl.c does the following to be sure:
(void)kmem_cache_destroy(cache);
* Those who check it printk something, however, slab_error already printed
the name of failed cache.
* XFS BUGs on failed kmem_cache_destroy which is not the decision
low-level filesystem driver should make. Converted to ignore.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some of the changes in balloc.c are just cosmetic, as Andreas pointed out -
if they overflow they'll then underflow and things are fine.
5th hunk actually fixes an overflow problem.
Also check for potential overflows in inode & block counts when resizing.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixing up some endian-ness warnings in preparation to clone ext4 from ext3.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
More white space cleanups in preparation of cloning ext4 from ext3.
Removing spaces that precede a tab.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SWsoft Virtuozzo/OpenVZ Linux kernel team has discovered that ext3 error
behavior was broken in linux kernels since 2.5.x versions by the following
patch:
2002/10/31 02:15:26-05:00 tytso@snap.thunk.org
Default mount options from superblock for ext2/3 filesystems
http://linux.bkbits.net:8080/linux-2.6/gnupatch@3dc0d88eKbV9ivV4ptRNM8fBuA3JBQ
In case ext3 file system is mounted with errors=continue
(EXT3_ERRORS_CONTINUE) errors should be ignored when possible. However at
present in case of any error kernel aborts journal and remounts filesystem
to read-only. Such behavior was hit number of times and noted to differ
from that of 2.4.x kernels.
This patch fixes this:
- do nothing in case of EXT3_ERRORS_CONTINUE,
- set EXT3_MOUNT_ABORT and call journal_abort() in all other cases
- panic() should be called after ext3_commit_super() to save
sb marked as EXT3_ERROR_FS
Signed-off-by: Vasily Averin <vvs@sw.ru>
Acked-by: Kirill Korotaev <dev@sw.ru>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the past there were a few kernel panics related to block reservation
tree operations failure (insert/remove etc). It would be very useful to
get the block allocation reservation map info when such error happens.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These are a few places I've found in jbd that look like they may not be
16T-safe, or consistent with the use of unsigned longs for block
containers. Problems here would be somewhat hard to hit, would require
journal blocks past the 8T boundary, which would not be terribly common.
Still, should fix.
(some of these have come from the ext4 work on jbd as well).
I think there's one more possibility that the wrap() function may not be
safe IF your last block in the journal butts right up against the 232 block
boundary, but that seems like a VERY remote possibility, and I'm not
worrying about it at this point.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is primarily format string fixes, with changes to ialloc.c where large
inode counts could overflow, and also pass around journal_inum as an
unsigned long, just to be pedantic about it....
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I need to do some actual IO testing now, but this gets things mounting for
a 16T ext3 filesystem. (patched up e2fsprogs is needed too, I'll send that
off the kernel list)
This patch fixes these issues in the kernel:
o sbi->s_groups_count overflows in ext3_fill_super()
sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
le32_to_cpu(es->s_first_data_block) +
EXT3_BLOCKS_PER_GROUP(sb) - 1) /
EXT3_BLOCKS_PER_GROUP(sb);
at 16T, s_blocks_count is already maxed out; adding
EXT3_BLOCKS_PER_GROUP(sb) overflows it and groups_count comes out to 0.
Not really what we want, and causes a failed mount.
Feel free to check my math (actually, please do!), but changing it this
way should work & avoid the overflow:
(A + B - 1)/B changed to: ((A - 1)/B) + 1
o ext3_check_descriptors() overflows range checks
ext3_check_descriptors() iterates over all block groups making sure
that various bits are within the right block ranges... on the last pass
through, it is checking the error case
[item] >= block + EXT3_BLOCKS_PER_GROUP(sb)
where "block" is the first block in the last block group. The last
block in this group (and the last one that will fit in 32 bits) is block
+ EXT3_BLOCKS_PER_GROUP(sb)- 1. block + EXT3_BLOCKS_PER_GROUP(sb) wraps
back around to 0.
so, make things clearer with "first_block" and "last_block" where those
are first and last, inclusive, and use <, > rather than <, >=.
Finally, the last block group may be smaller than the rest, so account
for this on the last pass through: last_block = sb->s_blocks_count - 1;
(a similar patch could be done for ext2; does anyone in their right mind
use ext2 at 16T? I'll send an ext2 patch doing the same thing if that's
warranted)
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove whitespace from ext3 and jbd, before we clone ext4.
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
jbd_sync_bh releases journal->j_list_lock. Add a lock annotation to this
function so that sparse can check callers for lock pairing, and so that
sparse will not complain about this function since it intentionally uses
the lock in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (225 commits)
[PATCH] Don't set calgary iommu as default y
[PATCH] i386/x86-64: New Intel feature flags
[PATCH] x86: Add a cumulative thermal throttle event counter.
[PATCH] i386: Make the jiffies compares use the 64bit safe macros.
[PATCH] x86: Refactor thermal throttle processing
[PATCH] Add 64bit jiffies compares (for use with get_jiffies_64)
[PATCH] Fix unwinder warning in traps.c
[PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1
[PATCH] x86: Move direct PCI scanning functions out of line
[PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCI
[PATCH] Don't leak NT bit into next task
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder
[PATCH] Fix some broken white space in ia32_signal.c
[PATCH] Initialize argument registers for 32bit signal handlers.
[PATCH] Remove all traces of signal number conversion
[PATCH] Don't synchronize time reading on single core AMD systems
[PATCH] Remove outdated comment in x86-64 mmconfig code
[PATCH] Use string instructions for Core2 copy/clear
[PATCH] x86: - restore i8259A eoi status on resume
[PATCH] i386: Split multi-line printk in oops output.
...
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits)
Driver core: Don't call put methods while holding a spinlock
Driver core: Remove unneeded routines from driver core
Driver core: Fix potential deadlock in driver core
PCI: enable driver multi-threaded probe
Driver Core: add ability for drivers to do a threaded probe
sysfs: add proper sysfs_init() prototype
drivers/base: check errors
drivers/base: Platform notify needs to occur before drivers attach to the device
v4l-dev2: handle __must_check
add CONFIG_ENABLE_MUST_CHECK
add __must_check to device management code
Driver core: fixed add_bind_files() definition
Driver core: fix comments in drivers/base/power/resume.c
sysfs_remove_bin_file: no return value, dump_stack on error
kobject: must_check fixes
Driver core: add ability for devices to create and remove bin files
Class: add support for class interfaces for devices
Driver core: create devices/virtual/ tree
Driver core: add device_rename function
Driver core: add ability for classes to handle devices properly
...
As David Howells <dhowells@redhat.com> points out, binfmt_elf sometimes uses
off_t, sometimes uses loff_t. Use loff_t throughout.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the atomic counter for slab_reclaim_pages and replace the counter
and NR_SLAB with two ZVC counter that account for unreclaimable and
reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE.
Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE. The
intend seems to be to check for slab pages that could be freed.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Do not display HIGHMEM memory sizes if CONFIG_HIGHMEM is not set.
Make HIGHMEM dependent texts and make display of highmem counters optional
Some texts are depending on CONFIG_HIGHMEM.
Remove those strings and remove the display of highmem counter values if
CONFIG_HIGHMEM is not set.
[akpm@osdl.org: remove some ifdefs]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tracking of dirty pages in shared writeable mmap()s.
The idea is simple: write protect clean shared writeable pages, catch the
write-fault, make writeable and set dirty. On page write-back clean all the
PTE dirty bits and write protect them once again.
The implementation is a tad harder, mainly because the default
backing_dev_info capabilities were too loosely maintained. Hence it is not
enough to test the backing_dev_info for cap_account_dirty.
The current heuristic is as follows, a VMA is eligible when:
- its shared writeable
(vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED)
- it is not a 'special' mapping
(vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0
- the backing_dev_info is cap_account_dirty
mapping_cap_account_dirty(vma->vm_file->f_mapping)
- f_op->mmap() didn't change the default page protection
Page from remap_pfn_range() are explicitly excluded because their COW
semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and
because they don't have a backing store anyway.
mprotect() is taught about the new behaviour as well. However it overrides
the last condition.
Cleaning the pages on write-back is done with page_mkclean() a new rmap call.
It can be called on any page, but is currently only implemented for mapped
pages, if the page is found the be of a VMA that accounts dirty pages it will
also wrprotect the PTE.
Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from
under ->private_lock. This seems to be safe, since ->private_lock is used to
serialize access to the buffers, not the page itself. This is needed because
clear_page_dirty() will call into page_mkclean() and would thereby violate
locking order.
[dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Original commit code assumes, that when a buffer on BJ_SyncData list is
locked, it is being written to disk. But this is not true and hence it can
lead to a potential data loss on crash. Also the code didn't count with
the fact that journal_dirty_data() can steal buffers from committing
transaction and hence could write buffers that no longer belong to the
committing transaction. Finally it could possibly happen that we tried
writing out one buffer several times.
The patch below tries to solve these problems by a complete rewrite of the
data commit code. We go through buffers on t_sync_datalist, lock buffers
needing write out and store them in an array. Buffers are also immediately
refiled to BJ_Locked list or unfiled (if the write out is completed). When
the array is full or we have to block on buffer lock, we submit all
accumulated buffers for IO.
[suitable for 2.6.18.x around the 2.6.19-rc2 timeframe]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix
linux/fs/compat.c: In function compat_sys_pselect7
linux/fs/compat.c:1869: warning: ignoring return value of copy_to_user, declared with attribute warn_unused_result
To make it easier to handle I changed to semantics to not try to
write out a timespec if an error occurred. I hope that's ok.
Cc: dwmw2@infradead.org
Signed-off-by: Andi Kleen <ak@suse.de>
Don't be crufty. Mark it __must_check too.
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make sysfs_remove_bin_file() void. If it detects an error,
printk the file name and call dump_stack().
sysfs_hash_and_remove() now returns an error code indicating
its success or failure so that sysfs_remove_bin_file() can
know success/failure.
Convert the only driver that checked the return value of
sysfs_remove_bin_file().
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When no events have been reported by sysfs_notify(), sd->s_events
was previously set to zero. The initial value for new readers is
also zero, so poll was blocking, regardless of whether the attribute
was read by the process or not.
Make poll behave consistently by setting the initial value of
sd->s_events to non-zero.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the timeout of an autofs mount is set to zero then umounts are disabled.
This works fine, however the kernel module checks the expire timeout and
goes no further if it is zero. This is not the right thing to do at
shutdown as the module is passed an option to expire mounts regardless of
their timeout setting.
This patch allows autofs to honor the force expire option.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes up a couple of conflicts when merging up with
Linus' latest kernel. This will hopefully allow GFS2 to
be more easily merged into forthcoming -mm and FC kernels
due to the "one line per header" format now used for the
kernel headers.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Conflicts:
include/linux/Kbuild
include/linux/kernel.h
With this, we don't need to pass an additional struct with function pointer.
Now that the callbacks are fully used, comment the remaining API.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Have ocfs2_process_blocked_lock() call ocfs2_generic_unblock_lock(), which
gets to be ocfs2_unblock_lock() now that it's the only possible unblock
function.
Remove the ->unblock() callback from the structure, and all lock type
specific unblock functions.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The meta data unblocking code no longer needs ocfs2_do_unblock_meta() or
ocfs2_can_downconvert_meta_lock(), so remove them.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Fill in the ->check_downconvert and ->set_lvb callbacks with meta data
specific operations and switch ocfs2_unblock_meta() to call
ocfs2_generic_unblock_lock()
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
