Always write out .config also in the case where config
did not change.
This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/lex.zconf.c:1628: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/kconfig/zconf.l and
regeneration of scripts/kconfig/lex.zconf.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
make defconfig generated a lot of output
then noone actually read.
Use conf_set_all_new_symbols() to generate the default
configuration and avoid the chatty output.
A typical run now looks like this:
$ make defconfig
*** Default configuration is based on 'i386_defconfig'
arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS
arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL
...
arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION
$
As an added benefit we now clearly see the warnings generated
in the start of the process.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Previously when running "make oldconfig" we saw all the propmt lines
from kconfig and noone actully read this.
With this patch the user will only see output if there is new symbols.
This will be seen as "make oldconfig" runs which does not generate any output.
A typical run now looks like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
$
If a new symbol is found then we restart the config process like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Local version - append to kernel release (LOCALVERSION) []
...
The bahaviour is similar to what we know when running the implicit
oldconfig target "make silentoldconfig".
"make silentoldconfig" are run as part of the kernel build process
if the configuration has changed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Drop the chatty mode when we generate the all*config, randconfig
configurations.
Ths speeds up the process considerably and noone looked
at the output anyway.
This patch uses the conf_set_all_new_symbols() function
just added to kconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
1) The field 'len' of the 'gstr' structure seems to track the size of the memory
already allocated for the "growable string". So the value of this field should be
the same as the 'malloc()' just above, shouldn't it ?
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
OS-X shell did not like 'echo -e' so implement
suggestion from Al Viro to use a more portable construct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-By: Timur Tabi <timur@freescale.com>
As choice dependency are now fully checked, it's quite easy to add support
for named choices. This lifts the restriction that a choice value can only
appear once, although it still has to be within the same group,
but multiple choices can be joined by giving them a name.
While at it I cleaned up a little the choice type logic to simplify it a
bit.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Properly check the dependency of choices as a group.
Also fix that sym_check_deps() correctly terminates the dependency loop
error check (otherwise it would continue printing the dependency chain).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box()
Makes the inputbox look like expected
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Massimo Maiurana reported:
In the latest kernel "make update-po-config" fails because it tries
to open arch/Kconfig/Kconfig, since the ls command doesn't
distinguish between files and directories.
Cc: Massimo Maiurana <maiurana@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> The attached .config (with current -git) results in a compile
> error since it contains:
>
> CONFIG_X86=y
> # CONFIG_EMBEDDED is not set
> CONFIG_SERIO=m
> CONFIG_SERIO_I8042=y
>
> Looking at drivers/input/serio/Kconfig I simply don't get how this
> can happen.
You've hit the rather subtle rules of select vs default. What happened is
that SERIO is selected to m, but SERIO_I8042 isn't selected so the default
of y is used instead.
We already had the problem in the past that select and default don't work
well together, so this patch cleans this up and makes the rule hopefully
more straightforward. Basically now the value is calculated like this:
(value && dependency) || select
where the value is the user choice (if available and the symbol is
visible) or default.
In this case it means SERIO and SERIO_I8042 are both set to y due to their
default and if SERIO didn't had the default, then the SERIO_I8042 value
would be limited to m due to the dependency.
I tested this patch with more 10000 random configs and above case is the
only the difference that showed up, so I hope there is nothing that
depended on the old more complex and subtle rules.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We have had warnings for a long time about select of unknow symbol
but the warnings does not really makes sense since we may
select a symbol that is relevant and defined in one
arch but not in another arch.
And as long as we do not use a common set of Kconfig files
for all archs lets just ignore this case.
Previously we have used this to find bad uses of
select but we need a more relaible method to do so.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Michal Zachar <mgzachar@mail.t-com.sk> reported that
menuconfig did not save the new config when loading
an alternate config unless he altered it manually.
Mark config as changed upon load of alternate config fixed this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel <zippel@linux-m68k.org>
Change kconfig behavior so that mixing bool and tristate config
settings in a choice is possible and has the desired effect of offering
just the tristate options individually if the choice gets set to M, and
a normal boolean selection if the choice gets set to Y.
Also fix scripts/kconfig/conf's handling of children of choice values -
there may be more than one immediate child, and all of them need to be
processed.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: "Roman Zippel" <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Kconfig had a synonym "enable" for "select" that was neither documented
nor used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add the possibility to import a value from the environment into kconfig
via the option syntax. Beside flexibility this has the advantage
providing proper dependencies.
Documented the options syntax.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Gettext support for symbol names are unnecessary.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Gettext support for conf.c
[Include locale.h by Kyle].
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Gettext support for lxdialog.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Full gettext support for menuconfig.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Full gettext support for xconfig.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
This patch removes the indirect I18N support for config file.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Gettext support for menu and toolbar.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
This patch removes the unnecessary whitespaces from
end of help lines of Kconfig files.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
rand and srand functions conform also to C89 in addition to POSIX.1-2001,
which makes them a bit more portable (work also on MinGW host). Linux man
page also says:
"The versions of rand() and srand() in the Linux C Library use the same
random number generator as random() and srandom()".
* Use C89 conformant functions rand() and srand()
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Sort includes and remove leading whitespace.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org
The *_PRINTED flags were never used - so delete them.
Do we need them later then we can re-add them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Allow config variables in .config to override earlier ones in the same
file. In other words,
# CONFIG_SECURITY is not defined
CONFIG_SECURITY=y
will activate it. This makes it a bit easier to do
cat original-config myconfig myconfig2 ... >.config;
and run *config as expected.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Kconfig is powerfull tool. So powerfull that more and more software
projects are using it for configuration. So instead of fixing some of
them one by one, lets fix it in kernel and wait for sync.
This work was originaly done for PTXdist - GPL licensed build system for
userlands and cross-compilers, but it will not hurt kernel kconfig
either. PTXdist menuconfig now works on Windows linked with PDCurses and
compiled using MinGW - there is no termios and signals.
* Do not include <sys/wait.h> and <signal.h> (comes from times when
lxdialog was separate process)
* Do not mess with termios directly and let curses tell screen size.
Comment to commit c8dc68ad0f says
check for screen size could be removed later, but because it didn't
happen for more than year I left it here as well.
* Save cursor position added by Sam
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Switch from doing our own parsing of command line arguments to
using getopt(3) to do it. Aside from simplifying things, this allows us to
specify multiple arguments; the old code could only accept two arguments
(input_mode and kconfig name).
Note some subtle changes:
- The argument '-?' is no longer supported.
- '-h' is not treated as an error, so output goes to stdout, and we
exit with '0'.
- There is no compatibility checking amongst arguments; the last option
will simply override earlier options. For example, 'conf -n -y foo'
is perfectly valid now (input_mode will be set_yes). Previously, that
would have been an error ("can't find file -y").
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
With this patch when ncurses-devel (or whatever it is named)
is missing trying to run menuconfig will result in this:
$ make menuconfig
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/kxgettext.o
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2
Much better than before where we just listed some build errors.
The other *config targets will work indepenednt on ncurses
being present or not.
Includes improvements suggested by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Frans Pop <elendil@planet.nl>
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options
are clobbered. As recommended by Roman, this adds an is_new test to see
whether to select a new option or obey the existing one.
This is a resend of the earlier patch a couple of weeks ago, since there
was no reply. Original thread is at http://lkml.org/lkml/2007/11/28/94
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.
For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)
The patch reverts these commits:
- 0f855aa64b ("kconfig: add helper to set
config symbol from environment variable")
- 2a113281f5 ("kconfig: use $K64BIT to
set 64BIT with all*config targets")
Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.
With this patch we have following behaviour:
# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit
The general rule are that ARCH= and native architecture takes
precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says. The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.
This behaviour is consistent with previous behaviour so no
suprises here.
make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".
With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
=> select 64-bit
Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
The variable K64BIT can now be used to select the
value of CONFIG_64BIT.
This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n
To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Add conf_set_env_sym() that can set an already defined symbol
based on the value of an environment variable.
Unknown symbols are silently ignored.
A warning is printed if the value of the environment variable
is unexpected.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This reverts commit a5bf3d891a.
David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:
"That Kconfig hasn't changed (other than adding new drivers), and it's
worked that way for several years now ... so the issue seems to be
changes in menuconfig/kconfig/etc semantics.
The issue is that when USB_GADGET=m, it's no longer possible to
configure peripheral controller drivers as modules ... the
controller drivers can now only be configured for static linkage.
It should be making a choice of one of the controller drivers which
could work on the target system, and allow that driver to be linked
either as a module (ok iff USB_GADGET=m) or statically."
Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.
Tested-and-reported-by: David Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
menuconfig currently represents options implied by another option ('select'
directive in Kconfig) by prefixing them with '---'. Unfortunately the same
notation is used for comments. If the implied option is module capable,
user can still switch between Y and M, all without any feedback until she
visits option's help. (try saying M to MAC80211 and then toggling
CFG80211)
This patch changes notation of selected-by-another items by introducing 2
new representations for implied options: {*} or {M} for options selected by
another modularized one, thus builtin or module capable, -*- or -M- for
options that cannot be at the moment changed by user.
The idea is to represent actual capability of the option by braces (dashes)
around and to always report actual state by * or M inside.
Signed-off-by: Matej Laitl <strohel@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Change kconfig behavior so that mixing bool and tristate config settings in
a choice is possible and has the desired effect of offering just the
tristate options individually if the choice gets set to M, and a normal
boolean selection if the choice gets set to Y.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Update _shipped files so regular user does not
need to have bison/flex/gperf installed.
Code changes were contained in previous commit.
Used following program versions (on fedora):
bison (GNU Bison) 2.3
flex 2.5.33
GNU gperf 3.0.2
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Remove the following redundant and never or rarely used kconfig syntax:
- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")
This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With specific configurations requesting help for certain
menu lines caused menuconfig to crash.
This was tracked down to a null pointer bug.
Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting
and to Gabriel C <nix.or.die@googlemail.com> for the backtrace
that helped me locating the bug.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Matěj Laitl <strohel@gmail.com> noticed that there was no way
to distingush between comments and un-selectable menu lines.
This patch marks comments with *** comment ***
Cc: Matěj Laitl <strohel@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
cygwin provides the header file but the lib file needs
to be added manually. A generic fix is to check if
we can compile and link a program that uses gettext()
and if it fails fall back to NO_NLS.
International users of cygwin may have to specify
HOST_LOADLIBES := "-lintl" on the make command line.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Avoid setting the value if the symbol doesn't need to be changed or can't
be changed. Later choices may change the dependencies and thus the
possible input range.
make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set
was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking,
even when there was no actual requirement for CONFIG_HOTPLUG_CPU.
This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.
This patch does this and at the same time introduce a few API
funtions used to access the help text.
The relevant api functions are introduced in the various frontends.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Normally generated values (Kconfig entries without a prompt) are cleared as
they are regenerated anyway and so they appear as new should they become
visible and defaults work as expected (once a value is set defaults aren't
used anymore).
The detection whether a value is generated or not is only based on its
visibility status, which can quickly change for a lot of symbols by just
removing a single line from .config or adding a dependency to Kconfig as you
noticed.
The patch now suppresses this logic when .config and Kconfig aren't in sync
and .config needs to be updated, so that you can remove now a random value
from .config and oldconfig won't reask for many other values.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Modify the ncurses configuration tool ('make menuconfig') in a way that the
user can enter the search string (/) both with or without the leading
'CONFIG_'.
This simplifies using copy & paste from .config files because you can
select the whole word.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Massimo Maiurana <maiurana@gmail.com> reported that
update-po-config was broken:
1) spelling errors in Makefile so arch/um failed
2) UTF-8 was not supported
The following patch address the above problems.
kxgettext now append the output to the .pot file
generated by xgettext - so we have a header.
In all places UFT-8 is specifed so we now flawlessly
support UTF-8.
The Kconfig files had an empty string in a few cases -
these are now supressed in kxgettext.
With this the translators can now pick up where they left
and get it all translated.
There are ~11000 strings to be translated...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Massimo Maiurana <maiurana@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
The "==" operator is not in POSIX, so use -eq instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The check-lxdialog.sh script searches for "libFOO.so" which fails on OS X, due
to their special naming of libraries like "libfoo.dylib". This patch turns
the curses lib search into extensible loops and adds dylib as a valid
extension.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
I have found small bug in mconf, when you run it without any argument it
will sigsegv.
Without patch:
$ scripts/kconfig/mconf
Segmentation fault
With patch:
$ scripts/kconfig/mconf
can't find file (null)
Signed-off-by: Marcin Garski <mgarski@post.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sample:
config FOO
bool "This is foo"
depends on BAR
config BAR
bool "This is bar"
depends on FOO
This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO
And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Correct a minor spelling mistake in a Kconfig warning message.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We do not support qt4 (yet) so the simple fix was to warn
that qt3 are missing.
The better fix would have been to implment qt4 support
but that has failed so far.
This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Nigel Cunningham <nigel@nigel.suspend2.net> noticed
that 'make mrproper' did not remove mconf.
Fixed so we now remove all relevant binaries.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Export and use the function conf_get_configname()
to retreive the default configuration filename.
Suggested by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When loading an alternate configuration use that file as
current configuration filename.
Make the filename visible in the dialog.
Default continue to be .config.
Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
When changing current menu in search dialog update also main view
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The index() function is obsolete, use strchr() instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch fixes showing empty config list items if "Option/Show All
Options" is turned on. For example empty items appears on list of 'Block
Layer' menu.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
qconf does not clear help text in search window if previous search has been
failed.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Relocate the qconf search command to the "Edit"->"Find" menu option.
This is per the discussion on my qconf search dialog patch.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.
This patch updates the descriptive text, when the corresponding value has
been changed. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744
Take2 uses updateList() so config values dependending on the changed value
see the change.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Back out the recent fix for this bug, fix it by correctly initialising
ConfigInfoView.sym.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: "Cyrill V. Gorcunov" <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
qconf may cause SIGSEGV by trying to show debug information on empty menu
items
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clean up a little.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Added function sets "void (*conf_changed_callback)(void)". Call it, if
.config's changed state changes. Use above in qconf.cc to set gui's
save-widget's sensitvity.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Those two functions are
void sym_set_change_count(int count)
and
void sym_add_change_count(int count)
All write accesses to sym_change_count are replaced by calls to above
functions.
Variable and changer-functions are moved to confdata.c. IMO thats ok, as
sym_change_count is an attribute of the .config's change state.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk
icon of the qt application, that has just started: Its in a normal, active
state.
Mouse click on it: .config is being saved.
This patch series changes things so taht
after the mouse click on the floppy disk icon, the icon is greyed out.
If you mouse click on it now, nothing happens.
If you change some CONFIG_*, the floppy disk icon returns to "active state",
that is, if you mouse click it now, .config is written.
This patch:
Returns sym_change_count to reflect the .config's change state.
All read only accesses of
sym_change_count
are replaced by calls to
conf_get_changed()
.
mconfig.c is manipulated to ask for saving only when
conf_get_changed() returned true.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Might make qconf compilable with qt-3.1 as well as qt-3.3
Cc: greg chesson <xtp@google.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On Mon, 13 Nov 2006, Phil Oester wrote:
> In commit 350b5b7638, the default menuconfig
> color scheme was changed to bluetitle. This breaks the highlighting
> of the selected item for me with TERM=vt100. The only way I can see
> which item is selected is via:
>
> make MENUCONFIG_COLOR=mono menuconfig
>
> Which restores the pre-2.6.19 white on black highlighting.
Fix.
Cc: Phil Oester <kernel@linuxace.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixes a segfault reported by Randy.
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
scripts/kconfig/lxdialog/util.c fails to build because it uses
true/false without including stdbool.h:
kronos:~/src/linux-2.6$ make O=../linux-build-git menuconfig
GEN /home/kronos/src/linux-build/Makefile
HOSTCC scripts/kconfig/lxdialog/util.o
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_classic_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: (Each undeclared identifier is reported only once
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: for each function it appears in.)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:70: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_blackbg_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:101: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:102: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_bluetitle_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:144: error: 'true' undeclared (first use in this function)
make[2]: *** [scripts/kconfig/lxdialog/util.o] Error 1
make[1]: *** [menuconfig] Error 2
make: *** [menuconfig] Error 2
Add <stdbool.h> to dialog.h to fix the breakage.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes bugzilla entry: 7182
http://bugzilla.kernel.org/show_bug.cgi?id=7182
With this patch we no longer append the directory part twice
before saving the config file.
This patch has been sent to Roman Zippel for review with no feedback.
It is so obviously simple that this should be OK to apply it anyway.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Do not initialize ncurses twice - it causes unpredicable
results. My display was sometimes weird after running
make menuconfig and I had to execute 'reset' to properly
restore my display.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Menulines that were wider than the available
line width is now properly null terminated.
While at it renamed the variable choice => line_y
so it better reflect the usage in do_print_item().
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Due to a limitation in kbuild all objects referred
by xxx-y or xxx-objs will be build when one of
the targets needs to e build.
This caused lxdialog to be build pulling in ncurses
that is not always available.
So avoid building mconf & lxdialog unless really needed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In all dialogs now properly catch KEY_RESIZE and take proper action.
In mconf try to behave sensibly when a dialog routine returns
-ERRDISPLAYTOOSMALL.
The original check for a screnn size of 80x19 is kept for now.
It may make sense to remove it later, but thats anyway what
much text is adjusted for.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
<ESC><ESC> is used to step one back in the dialogs.
When lxdialog became built-in pressing <ESC> once would cause one step back
and pressing <ESC><ESC> would cause two steps back.
This patch - based on concept from Roman Zippel <zippel@linux-m68k.org> -
makes one <ESC> a noop and pressing <ESC><ESC> will cause one step backward.
In addition the final yes/no dialog now has the option to go back to the
the kernel configuration. So if you get too far out you can now go back
to configuring the kernel without saving and starting all over again.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
lxdialog was previously called as an external program causing screen
to flicker when used. With this patch lxdialog is now built-in.
It is loosly based om previous work by: Petr Baudis <pasky@ucw.cz>
Following is a list of changes:
o Moved build of dialog routings to kconfig Makefile
o menubox + checklist uses a new item list to hold all menu items
o in util.c implmented helper function to deal with item list
o menubox now uses parameters to save scroll state (avoids temp file)
o textbox now get text to be displayed as parameter and not a file
o make sure to properly delete subwin's before main windows
o killed unused files: lxdialog.c msgbox.c
o modified return value for ESC to match direct calling
o in a few places the code has been adjusted to 80 char wide
o in textbox a small refactoring was made to make code remotely readable
o in mconf removed all unused stuff (functions/variables)
Following is a list of know short comings:
a) pressing ESC twice will be interpreted as two ESC presses
b) resize does not work. menuconfig needs to be restarted to be adjusted
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
