1
Commit Graph

1644 Commits

Author SHA1 Message Date
Linus Torvalds
e8bebe2f71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
  fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
  get rid of home-grown mutex in cris eeprom.c
  switch ecryptfs_write() to struct inode *, kill on-stack fake files
  switch ecryptfs_get_locked_page() to struct inode *
  simplify access to ecryptfs inodes in ->readpage() and friends
  AFS: Don't put struct file on the stack
  Ban ecryptfs over ecryptfs
  logfs: replace inode uid,gid,mode initialization with helper function
  ufs: replace inode uid,gid,mode initialization with helper function
  udf: replace inode uid,gid,mode init with helper
  ubifs: replace inode uid,gid,mode initialization with helper function
  sysv: replace inode uid,gid,mode initialization with helper function
  reiserfs: replace inode uid,gid,mode initialization with helper function
  ramfs: replace inode uid,gid,mode initialization with helper function
  omfs: replace inode uid,gid,mode initialization with helper function
  bfs: replace inode uid,gid,mode initialization with helper function
  ocfs2: replace inode uid,gid,mode initialization with helper function
  nilfs2: replace inode uid,gid,mode initialization with helper function
  minix: replace inode uid,gid,mode init with helper
  ext4: replace inode uid,gid,mode init with helper
  ...

Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
2010-05-21 19:37:45 -07:00
Stephen Hemminger
46e58764f0 xfs: constify xattr_handler
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:19 -04:00
Jens Axboe
ee9a3607fb Merge branch 'master' into for-2.6.35
Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:27:26 +02:00
Christoph Hellwig
c472b43275 quota: unify ->set_dqblk
Pass the larger struct fs_disk_quota to the ->set_dqblk operation so
that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->set_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.

Add new fieldmask values for setting the numer of blocks and inodes
values which is required for the VFS quota, but wasn't for XFS.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:44 +02:00
Christoph Hellwig
b9b2dd36c1 quota: unify ->get_dqblk
Pass the larger struct fs_disk_quota to the ->get_dqblk operation so
that the Q_GETQUOTA and Q_XGETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->get_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:43 +02:00
Christoph Hellwig
b4ed4626a9 xfs: mark xfs_iomap_write_ helpers static
And also drop a useless argument to xfs_iomap_write_direct.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:20 -05:00
Christoph Hellwig
bd1556a146 xfs: clean up end index calculation in xfs_page_state_convert
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:20 -05:00
Christoph Hellwig
2b8f12b7e4 xfs: clean up mapping size calculation in __xfs_get_blocks
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:19 -05:00
Christoph Hellwig
558e689169 xfs: clean up xfs_iomap_valid
Rename all iomap_valid identifiers to imap_valid to fit the new
world order, and clean up xfs_iomap_valid to convert the passed in
offset to blocks instead of the imap values to bytes.  Use the
simpler inode->i_blkbits instead of the XFS macros for this.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:19 -05:00
Christoph Hellwig
34a52c6c06 xfs: move I/O type flags into xfs_aops.c
The IOMAP_ flags are now only used inside xfs_aops.c for extent
probing and I/O completion tracking, so more them here, and rename
them to IO_* as there's no mapping involved at all.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:17 -05:00
Christoph Hellwig
207d041602 xfs: kill struct xfs_iomap
Now that struct xfs_iomap contains exactly the same units as struct
xfs_bmbt_irec we can just use the latter directly in the aops code.
Replace the missing IOMAP_NEW flag with a new boolean output
parameter to xfs_iomap.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:17 -05:00
Christoph Hellwig
e513182d4d xfs: report iomap_bn in block base
Report the iomap_bn field of struct xfs_iomap in terms of filesystem
blocks instead of in terms of bytes.  Shift the byte conversions
into the caller, and replace the IOMAP_DELAY and IOMAP_HOLE flag
checks with checks for HOLESTARTBLOCK and DELAYSTARTBLOCK.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:17 -05:00
Christoph Hellwig
8699bb0a48 xfs: report iomap_offset and iomap_bsize in block base
Report the iomap_offset and iomap_bsize fields of struct xfs_iomap
in terms of fsblocks instead of in terms of disk blocks.  Shift the
byte conversions into the callers temporarily, but they will
disappear or get cleaned up later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:17 -05:00
Christoph Hellwig
9563b3d899 xfs: remove iomap_delta
The iomap_delta field in struct xfs_iomap just contains the
difference between the offset passed to xfs_iomap and the
iomap_offset.  Just calculate it in the only caller that cares.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:17 -05:00
Christoph Hellwig
046f1685bb xfs: remove iomap_target
Instead of using the iomap_target field in struct xfs_iomap
and the IOMAP_REALTIME flag just use the already existing
xfs_find_bdev_for_inode helper.  There's some fallout as we
need to pass the inode in a few more places, which we also
use to sanitize some calling conventions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:16 -05:00
Christoph Hellwig
826bf0adce xfs: limit xfs_imap_to_bmap to a single mapping
We only call xfs_iomap for single mappings anyway, so remove all
code dealing with multiple mappings from xfs_imap_to_bmap and add
asserts that we never get results that we do not expect.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:16 -05:00
Christoph Hellwig
4a5224d7b1 xfs: simplify buffer to transaction matching
We currenly have a routine xfs_trans_buf_item_match_all which checks
if any log item in a transaction contains a given buffer, and a
second one that only does this check for the first, embedded chunk
of log items.  We only use the second routine if we know we only
have that log item chunk, so get rid of the limited routine and
always use the more complete one.

Also rename the old xfs_trans_buf_item_match_all to
xfs_trans_buf_item_match and update various surrounding comments,
and move the remaining xfs_trans_buf_item_match on top of the file
to avoid a forward prototype.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:16 -05:00
Tao Ma
2d1ff3c75a xfs: Make fiemap work in query mode.
According to Documentation/filesystems/fiemap.txt, If fm_extent_count
is zero, then the fm_extents[] array is ignored (no extents will be
returned), and the fm_mapped_extents count will hold the number of
extents needed.

But as the commit 97db39a1f6 has changed
bmv_count to the caller's input buffer, this number query function can't
work any more. As this commit is written to change bmv_count from
MAXEXTNUM because of ENOMEM.

This patch just try to  set bm.bmv_count to something sane.
Thanks to Dave Chinner <david@fromorbit.com> for the suggestion.

Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-19 09:58:16 -05:00
Alex Elder
48389ef175 xfs: kill off l_sectbb_mask
There remains only one user of the l_sectbb_mask field in the log
structure.  Just kill it off and compute the mask where needed from
the power-of-2 sector size.

(Only update from last post is to accomodate the changes in the
previous patch in the series.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:16 -05:00
Alex Elder
69ce58f08a xfs: record log sector size rather than log2(that)
Change struct log so it keeps track of the size (in basic blocks) of
a log sector in l_sectBBsize rather than the log-base-2 of that
value (previously, l_sectbb_log).  The name was chosen for
consistency with the other fields in the structure that represent
a number of basic blocks.

(Updated so that a variable used in computing and verifying a log's
sector size is named "log2_size".  Also added the "BB" to the
structure field name, based on feedback from Eric Sandeen.  Also
dropped some superfluous parentheses.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2010-05-19 09:58:15 -05:00
Christoph Hellwig
1414a6046a xfs: remove dead XFS_LOUD_RECOVERY code
This can't be enabled through the build system and has been dead for
ages.  Note that the CRC patches add back log checksumming, but the
code is quite different from the version removed here anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-05-19 09:58:15 -05:00
Christoph Hellwig
8112e9dc6d xfs: removed unused XFS_QMOPT_ flags
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-05-19 09:58:15 -05:00
Christoph Hellwig
191f8488f9 xfs: remove a few macro indirections in the quota code
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-05-19 09:58:15 -05:00
Christoph Hellwig
8a7b8a89a3 xfs: access quotainfo structure directly
Access fields in m_quotainfo directly instead of hiding them behind the
XFS_QI_* macros.  Add local variables for the quotainfo pointer in places
where we have lots of them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-05-19 09:58:14 -05:00
Christoph Hellwig
37bc5743fd xfs: wait for direct I/O to complete in fsync and write_inode
We need to wait for all pending direct I/O requests before taking care of
metadata in fsync and write_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-05-19 09:58:14 -05:00
Andrea Gelmini
fce1cad651 xfs: xfs_trace.c: duplicated include
fs/xfs/linux-2.6/xfs_trace.c: xfs_attr_sf.h is included more than once.

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:14 -05:00
Alex Elder
3f943d853d xfs: minor odds and ends in xfs_log_recover.c
Odds and ends in "xfs_log_recover.c".  This patch just contains some
minor things that didn't seem to warrant their own individual
patches:
- In xlog_bread_noalign(), drop an assertion that a pointer is
  non-null (the crash will tell us it was a bad pointer).
- Add a more descriptive header comment for xlog_find_verify_cycle().
- Make a few additions to the comments in xlog_find_head().  Also
  rearrange some expressions in a few spots to produce the same
  result, but in a way that seems more clear what's being computed.

(Updated in response to Dave's review comments.  Note I did not
split this patch like I said I would.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:14 -05:00
Alex Elder
e3bb2e30d5 xfs: avoid repeated pointer dereferences
In xlog_find_cycle_start() use a local variable for some repeated
operations rather than constantly accessing the memory location
whose address is passed in.

(This version drops an assertion that a pointer is non-null.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:14 -05:00
Alex Elder
9db127edb5 xfs: change a few labels in xfs_log_recover.c
Rename a label used in xlog_find_head() that I thought was poorly
chosen.  Also combine two adjacent labels xlog_find_tail() into a
single label, and give it a more generic name.

(Now using Dave's suggested "validate_head" name for first label.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:13 -05:00
Christoph Hellwig
8c38366f99 xfs: enforce synchronous writes in xfs_bwrite
xfs_bwrite is used with the intention of synchronously writing out
buffers, but currently it does not actually clear the async flag if
that's left from previous writes but instead implements async
behaviour if it finds it.  Remove the code handling asynchronous
writes as we've got rid of those entirely outside of the log and
delwri buffers, and make sure that we clear the async and read flags
before writing the buffer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:13 -05:00
Christoph Hellwig
df308bcfec xfs: remove periodic superblock writeback
All modifications to the superblock are done transactional through
xfs_trans_log_buf, so there is no reason to initiate periodic
asynchronous writeback.  This only removes the superblock from the
delwri list and will lead to sub-optimal I/O scheduling.

Cut down xfs_sync_fsdata now that it's only used for synchronous
superblock writes and move the log coverage checks into the two
callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-19 09:58:13 -05:00
Dave Chinner
f983710758 xfs: make the log ticket transaction id random
The transaction ID that is written to the log for a transaction is
currently set by taking the lower 32 bits of the memory address of
the ticket structure.  This is not guaranteed to be unique as
tickets comes from a slab and slots can be reallocated immediately
after being freed. As a result, there is no guarantee of uniqueness
in the ticket ID value.

Fix this by assigning a random number to the ticket ID field so that
it is extremely unlikely that duplicates will occur and remove the
possibility of transactions being mixed up during recovery due to
duplicate IDs.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:13 -05:00
Alex Elder
36adecff50 xfs: nothing special about 1-block log sector
There are a number of places where a log sector size of 1 uses
special case code.  The round_up() and round_down() macros
produce the correct result even when the log sector size is 1, and
this eliminates the need for treating this as a special case.

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:12 -05:00
Alex Elder
ff30a6221d xfs: encapsulate bbcount validity checking
Define a function that encapsulates checking the validity of a log
block count.

(Updated from previous version--no longer includes error reporting in the
encapsulated validation function.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:12 -05:00
Alex Elder
5c17f5339f xfs: kill XLOG_SECTOR_ROUND*()
XLOG_SECTOR_ROUNDUP_BBCOUNT() and XLOG_SECTOR_ROUNDDOWN_BLKNO()
are now fairly simple macro translations.  Just get rid of them in
favor of the round_up() and round_down() macro calls they represent.

Also, in spots in xlog_get_bp() and xlog_write_log_records(),
round_up() was being called with value 1, which just evaluates
to the macro's second argument; so just use that instead.
In the latter case, make use of that value, as long as it's
already been computed.

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:12 -05:00
Alex Elder
8511998baa xfs: simplify XLOG_SECTOR_ROUND*()
XLOG_SECTOR_ROUNDUP_BBCOUNT() is defined in "fs/xfs/xfs_log_recover.c"
in an overly-complicated way.  It is basically roundup(), but that
is not at all clear from its definition.  (Actually, there is
another macro round_up() that applies for power-of-two-based masks
which I'll be using here.)

The operands in XLOG_SECTOR_ROUNDUP_BBCOUNT() are basically the
block number (bbs) and the log sector basic block mask
(log->l_sectbb_mask).  I'll call them B and M for this discussion.

The macro computes is value this way:
	M && (B & M) ? (B + M + 1) & ~M : B

Put another way, we can break it into 3 cases:
	1)  ! M          -> B			# 0 mask, no effect
	2)  ! (B & M)    -> B			# sector aligned
	3)  M && (B & M) -> (B + M + 1) & ~M	# round up otherwise

The round_up() macro is cleverly defined using a value, v, and a
power-of-2, p, and the result is the nearest multiple of p greater
than or equal to v.  Its value is computed something like this:
	((v - 1) | (p - 1)) + 1
Let's consider using this in the context of the 3 cases above.

When p = 2^0 = 1, the result boils down to ((v - 1) | 0) + 1, so it
just translates any value v to itself.  That handles case (1) above.

When p = 2^n, n > 0, we know that (p - 1) will be a mask with all n
bits 0..n-1 set.  The condition in this case occurs when none of
those mask bits is set in the value v provided.  If that is the
case, subtracting 1 from v will have 1's in all those lower bits (at
least).  Therefore, OR-ing the mask with that decremented value has
no effect, so adding the 1 back again will just translate the v to
itself.  This handles case (2).

Otherwise, the value v is greater than some multiple of p, and
decrementing it will produce a result greater than or equal to that
multiple.  OR-ing in the mask will produce a value 1 less than the
next multiple of p, so finally adding 1 back will result in the
desired rounded-up value.  This handles case (3).

Hopefully this is convincing.

While I was at it, I converted XLOG_SECTOR_ROUNDDOWN_BLKNO() to use
the round_down() macro.

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:12 -05:00
Alex Elder
6881a229f6 xfs: fix min bufsize bugs in two places
This fixes a bug in two places that I found by inspection.  In
xlog_find_verify_cycle() and xlog_write_log_records(), the code
attempts to allocate a buffer to hold as many blocks as possible.
It gives up if the number of blocks to be allocated gets too small.
Right now it uses log->l_sectbb_log as that lower bound, but I'm
sure it's supposed to be the actual log sector size instead.  That
is, the lower bound should be (1 << log->l_sectbb_log).

Also define a simple macro xlog_sectbb(log) to represent the number
of basic blocks in a sector for the given log.

(No change from original submission; I have implemented Christoph's
suggestion about storing l_sectsize rather than l_sectbb_log in
a new, separate patch in this series.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:12 -05:00
Alex Elder
a0e856b0b4 xfs: add const qualifiers to xfs error function args
Change the tag and file name arguments to xfs_error_report() and
xfs_corruption_error() to use a const qualifier.

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:11 -05:00
Christoph Hellwig
74457cf4a3 xfs: remove xfs_dqmarker
The xfs_dqmarker structure does not need to exist anymore. Move the
remaining flags field out of it and remove the structure altogether.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-05-19 09:58:11 -05:00
Dave Chinner
3a8406f6d6 xfs: convert the dquot free list to use list heads
Convert the dquot free list on the filesystem to use listhead
infrastructure rather than the roll-your-own in the quota code.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:11 -05:00
Dave Chinner
e6a81f13aa xfs: convert the dquot hash list to use list heads
Convert the dquot hash list on the filesystem to use listhead
infrastructure rather than the roll-your-own in the quota code.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:11 -05:00
Dave Chinner
368e136174 xfs: remove duplicate code from dquot reclaim
The dquot shaker and the free-list reclaim code use exactly the same
algorithm but the code is duplicated and slightly different in each
case. Make the shaker code use the single dquot reclaim code to
remove the code duplication.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:11 -05:00
Dave Chinner
3a25404b3f xfs: convert the per-mount dquot list to use list heads
Convert the dquot list on the filesytesm to use listhead
infrastructure rather than the roll-your-own in the quota code.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:10 -05:00
Dave Chinner
9abbc539bf xfs: add log item recovery tracing
Currently there is no tracing in log recovery, so it is difficult to
determine what is going on when something goes wrong.

Add tracing for log item recovery to provide visibility into the log
recovery process. The tracing added shows regions being extracted
from the log transactions and added to the transaction hash forming
recovery items, followed by the reordering, cancelling and finally
recovery of the items.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:10 -05:00
Christoph Hellwig
e6b1f27370 xfs: clean up xlog_write_adv_cnt
Replace the awkward xlog_write_adv_cnt with an inline helper that makes
it more obvious that it's modifying it's paramters, and replace the use
of an integer type for "ptr" with a real void pointer.  Also move
xlog_write_adv_cnt to xfs_log_priv.h as it will be used outside of
xfs_log.c in the delayed logging series.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:10 -05:00
Dave Chinner
55b66332d0 xfs: introduce new internal log vector structure
The current log IO vector structure is a flat array and not
extensible. To make it possible to keep separate log IO vectors for
individual log items, we need a method of chaining log IO vectors
together.

Introduce a new log vector type that can be used to wrap the
existing log IO vectors on use that internally to the log. This
means that the existing external interface (xfs_log_write) does not
change and hence no changes to the transaction commit code are
required.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:10 -05:00
Christoph Hellwig
99428ad0f6 xfs: reindent xlog_write
Reindent xlog_write to normal one tab indents and move all variable
declarations into the closest enclosing block.

Split from a bigger patch by Dave Chinner.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:10 -05:00
Dave Chinner
b5203cd0a4 xfs: factor xlog_write
xlog_write is a mess that takes a lot of effort to understand. It is
a mass of nested loops with 4 space indents to get it to fit in 80 columns
and lots of funky variables that aren't obvious what they mean or do.

Break it down into understandable chunks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:09 -05:00
Dave Chinner
9b9fc2b760 xfs: log ticket reservation underestimates the number of iclogs
When allocation a ticket for a transaction, the ticket is initialised with the
worst case log space usage based on the number of bytes the transaction may
consume. Part of this calculation is the number of log headers required for the
iclog space used up by the transaction.

This calculation makes an undocumented assumption that if the transaction uses
the log header space reservation on an iclog, then it consumes either the
entire iclog or it completes. That is - the transaction that is first in an
iclog is the transaction that the log header reservation is accounted to. If
the transaction is larger than the iclog, then it will use the entire iclog
itself. Document this assumption.

Further, the current calculation uses the rule that we can fit iclog_size bytes
of transaction data into an iclog. This is in correct - the amount of space
available in an iclog for transaction data is the size of the iclog minus the
space used for log record headers. This means that the calculation is out by
512 bytes per 32k of log space the transaction can consume. This is rarely an
issue because maximally sized transactions are extremely uncommon, and for 4k
block size filesystems maximal transaction reservations are about 400kb. Hence
the error in this case is less than the size of an iclog, so that makes it even
harder to hit.

However, anyone using larger directory blocks (16k directory blocks push the
maximum transaction size to approx. 900k on a 4k block size filesystem) or
larger block size (e.g. 64k blocks push transactions to the 3-4MB size) could
see the error grow to more than an iclog and at this point the transaction is
guaranteed to get a reservation underrun and shutdown the filesystem.

Fix this by adjusting the calculation to calculate the correct number of iclogs
required and account for them all up front.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:09 -05:00
Dave Chinner
b1c1b5b610 xfs: Clean up xfs_trans_committed code after factoring
Now that the code has been factored, clean up all the remaining
style cruft, simplify the code and re-order functions so that it
doesn't need forward declarations.

Also move the remaining functions that require forward declarations
(xfs_trans_uncommit, xfs_trans_free) so that all the forward
declarations can be removed from the file.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:09 -05:00