1
Commit Graph

14 Commits

Author SHA1 Message Date
Al Viro
64b33619a3 long vs. unsigned long - low-hanging fruits in drivers
deal with signedness of the stuff passed to set_bit() et.al.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:51 -07:00
Stephen Hemminger
3b04ddde02 [NET]: Move hardware header operations out of netdevice.
Since hardware header operations are part of the protocol class
not the device instance, make them into a separate object and
save memory.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:52 -07:00
Matthias Kaehlcke
3623060abb [PATCH] Use mutex instead of semaphore in the Host AP driver
The Host AP driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:36 -07:00
Adrian Bunk
5fad5a2e1f [PATCH] hostap: don't #include C files in hostap_main.c
This patch contains an attempt to properly build hostap.o without
#include'ing C files.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:54 -05:00
Jouni Malinen
bab76198b3 [PATCH] hostap: Remove hw specific dev_open/close handlers
Host AP driver used hardware model specific dev_open/close handlers
that were called on dev_open/close if the hardware driver had
registered the handler. These were only used for hostap_cs and only
for tracking whether any of the netdevs were UP. This information is
already available from local->num_dev_open, so there is not need for
the special open/close handler.

Let's get rid of these handlers. In addition to cleaning up the code,
this fixes a module refcounting issue for hostap_cs where ejecting the
card while any of the netdevs were open did not decrement refcount
properly.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:00:08 -04:00
Jouni Malinen
3ec0f4857d [PATCH] hostap: Remove extra defines
Remove unused defines that are already available from generic kernel
header files.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-14 23:07:30 -04:00
Jouni Malinen
67e0e473fb [PATCH] hostap: Use void *hw_priv instead of #ifdef in local data
Replace hardware model specific #ifdef's in struct local_info with
void *hw_priv that is pointing to cs/pci/plx specific data
structure. This removes unneeded #ifdef's and as such, is a step
towards making it possible to share objects for hostap_hw.c and
hostap_download.c with cs/pci/plx drivers without having to compile
and link the same code separately for each one.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-14 23:06:27 -04:00
Jouni Malinen
ea3f1865f3 [PATCH] hostap: Remove experimental PCI bus master/DMA code
PCI version of Prism2.5/3 has undocumented DMA support for TX/RX data,
but this seems to have some hardware bugs that prevent it from being
used properly for TX. RX side could possibly be made to work reliably.

Even though DMA support would be very useful for saving host CPU (from
about 40% to 5-10% when operating at maximum throughput), it seems to
be best to just remove this code finally. The implementation has
always been commented out by default and has received very limited
testing. The code may have already been broken number of times and I
don't have much interested in trying to verify whether it works or
not. Getting this out makes it easier to maintain the driver and
allows some cleanups that have been partly postponed because of this
experimental bus master/DMA code.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-14 23:06:27 -04:00
Jouni Malinen
5bee720fd7 [PATCH] hostap: Fix skb->cb use for TX meta data
Old AP mode code for power saving was using skb->cb for couple of
flags before the more generic 802.11 TX code started using the same
buffer for struct hostap_skb_tx_data. This resulted in the power save
code corrupting the magic value in beginning of the buffer and TX code
dropping the power saved packets because of this for the case where
STAs send PS-Poll frames with PwrMgmt flag set.

This patch modifies the power save code to use the same struct
hostap_skb_tx_data as rest of the TX path in order to avoid corrupting
the data in skb->cb.

In addition, this patch reorders fields in the structure and makes
them use smaller types in order to make the structure fit in skb->cb
on 64-bit hosts.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-14 23:06:26 -04:00
Jouni Malinen
62fe7e3781 [PATCH] hostap: Replace crypto code with net/ieee80211 version
Replace Host AP version of WEP, TKIP, CCMP implementation with
net/ieee80211 that has more or less identical implementation (since
it is based on the Host AP implementation). Remove Host AP specific
implementation and modules from drivers/net/wireless/hostap.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 00:28:02 -04:00
Pavel Roskin
b15eff2632 [PATCH] hostap update
Warning fix for 64-bit platforms

Hello!

The patch fixes following warning seen on 64-bit platforms (in my case -
x86_64, gcc-4.0):

In file included from /usr/local/src/hostap/driver/modules/hostap_cs.c:203:
/usr/local/src/hostap/driver/modules/hostap_hw.c: In function ?prism2_transmit_cb?:
/usr/local/src/hostap/driver/modules/hostap_hw.c:1674: warning: cast from pointer to integer of different size
/usr/local/src/hostap/driver/modules/hostap_hw.c: In function ?prism2_transmit?:
/usr/local/src/hostap/driver/modules/hostap_hw.c:1758: warning: cast to pointer from integer of different size

prism2_transmit_cb uses a (void *) argument to get an integer.   A
simple fix would be to use double cast from pointer to long and then to
int (and vice versa when int is passed as a pointer).  But I prefer a
slightly longer patch.

I believe that whenever an argument can hold both a pointer and an
integer, it should be declared long.  long can hold both pointers and
integers (except win64, but we are not coding for Windows), it can be
cast to both of them and it's never assumed to be a valid pointer, which
could be useful for some automatic code checkers.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30 18:17:23 -04:00
Jouni Malinen
2e4fd068e7 [PATCH] hostap update
Cleaned up scan result processing by converting struct
hfa384x_scan_result into struct hfa384x_hostscan_result. This removes
special cases from result processing since the results are only used
in one, hostscan, format.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30 18:17:23 -04:00
Jouni Malinen
72ca9c61cd [PATCH] hostap update
Added support for setting channel mask for scan requests
('iwpriv wlan0 scan_channels 0x00ff' masks scans to use channels 1-8).

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30 18:17:22 -04:00
Jouni Malinen
ff1d2767d5 Add HostAP wireless driver.
Includes minor cleanups from Adrian Bunk <bunk@stusta.de>.
2005-05-12 22:54:16 -04:00