Enum constants can be used as array sizes; if the enum itself does not
appear in the symbol expansion, a change in the enum constant will go
unnoticed. Example patch that changes the ABI but does not change the
checksum with current genksyms:
| enum e {
| E1,
| E2,
|+ E3,
| E_MAX
| };
|
| struct s {
| int a[E_MAX];
| }
|
| int f(struct s *s) { ... }
| EXPORT_SYMBOL(f)
Therefore, remember the value of each enum constant and
expand each occurence to <constant> <value>. The value is not actually
computed, but instead an expression in the form
(last explicitly assigned value) + N
is used. This avoids having to parse and semantically understand whole
of C.
Note: The changes won't take effect until the lexer and parser are
rebuilt by the next patch.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Allow searching for symbols of an exact type. The lexer does this and a
subsequent patch will add one more usage.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Instead of special-casing SYM_NORMAL, do not map any name to it. Also
explicitly set the single-letter name of the symbol type, which will be
needed by a further patch. The only user-visible change is one debug
printf.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
It is the last place when the file is read, so close it.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fix up -Wmissing-prototypes in compileable userspace code, mainly under
Documentation/.
Signed-off-by: Ladinu Chandrasinghe <ladinu.pub@gmail.com>
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit ad7a953c52.
And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL")
9bb482476c
These stripping patches has caused a set of issues:
1) People have reported compatibility issues with binutils due to
lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2
Reported by: Wenji
2) ccache and distcc no longer works as expeced
Reported by: Ted, Roland, + others
3) The installed modules increased a lot in size
Reported by: Ted, Davej + others
Reported-by: Wenji Huang <wenji.huang@oracle.com>
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch changes the way __crc_ symbols are being resolved from
using ld to do so to using the assembler, thus allowing these symbols
to be marked local (the linker creates then as global ones) and hence
allow stripping (for modules) or ignoring (for vmlinux) them. While at
this, also strip other generated symbols during module installation.
One potentially debatable point is the handling of the flags passeed
to gcc when translating the intermediate assembly file into an object:
passing $(c_flags) unchanged doesn't work as gcc passes --gdwarf2 to
gas whenever is sees any -g* option, even for -g0, and despite the
fact that the compiler would have already produced all necessary debug
info in the C->assembly translation phase. I took the approach of just
filtering out all -g* options, but an alternative to such negative
filtering might be to have a positive filter which might, in the ideal
case allow just all the -Wa,* options to pass through.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This adds an "override" keyword for use in *.symvers / *.symref files.
When a symbol is overridden, the symbol's old definition will be used for
computing checksums instead of the new one, preserving the previous
checksum. (Genksyms will still warn about the change.)
This is meant to allow distributions to hide minor actual as well as fake
ABI changes. (For example, when extra type information becomes available
because additional headers are included, this may change checksums even
though none of the types used have actully changed.)
This approach also allows to get rid of "#ifdef __GENKSYMS__" hacks in the
code, which are currently used in some vendor kernels to work around
checksum changes.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sometimes it is preferable to avoid changes of exported symbol checksums
(to avoid breaking externally provided modules). When a checksum change
occurs, it can be hard to figure out what caused this change: underlying
types may have changed, or additional type information may simply have
become available at the point where a symbol is exported.
Add a new --reference option to genksyms which allows it to report why
checksums change, based on the type information dumps it creates with the
--dump-types flag. Genksyms will read in such a dump from a previous run,
and report which symbols have changed (and why).
The behavior can be controlled for an entire build as follows: If
KBUILD_SYMTYPES is set, genksyms uses --dump-types to produce *.symtypes
dump files. If any *.symref files exist, those will be used as the
reference to check against. If KBUILD_PRESERVE is set, checksum changes
will fail the build.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The extern flag currently is not included in type dump files
(genksyms --dump-types). Include that flag there for completeness.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.
There also seems to be noone willing to bring this port back into a usable
state.
This patch therefore removes the v850 port.
If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The usage does not mention the "-a,--arch" or "-T,--dump-types" options, so
add them. The calls to getopt() seem to mention options that no longer exist
(some "k" and "p" thingy) but omits the "h" option which means using '-h'
actually triggers the error code path, so update those as well.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is a patch that adds a new -T option to genksyms for generating dumps of
the type definition that makes up the symbol version hashes. This allows to
trace modversion changes back to what caused them. The dump format is the
name of the type defined, followed by its definition (which is almost C):
s#list_head struct list_head { s#list_head * next , * prev ; }
The s#, u#, e#, and t# prefixes stand for struct, union, enum, and typedef.
The exported symbols do not define types, and thus do not have an x# prefix:
nfs4_acl_get_whotype int nfs4_acl_get_whotype ( char * , t#u32 )
The symbol type defintion of a single file can be generated with:
make fs/jbd/journal.symtypes
If KBUILD_SYMTYPES is defined, all the *.symtypes of all object files that
export symbols are generated.
The single *.symtypes files can be combined into a single file after a kernel
build with a script like the following:
for f in $(find -name '*.symtypes' | sort); do
f=${f#./}
echo "/* ${f%.symtypes}.o */"
cat $f
echo
done \
| sed -e '\:UNKNOWN:d' \
-e 's:[,;] }:}:g' \
-e 's:\([[({]\) :\1:g' \
-e 's: \([])},;]\):\1:g' \
-e 's: $::' \
$f \
| awk '
/^.#/ { if (defined[$1] == $0) {
print $1
next
}
defined[$1] = $0
}
{ print }
'
When the kernel ABI changes, diffing individual *.symtype files, or the
combined files, against each other will show which symbol changes caused the
ABI changes. This can save a tremendous amount of time.
Dump the types that make up modversions
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
o remove all inlines
o declare everything static which is only used by genksyms.c
o delete unused functions
o delete unused variables
o delete unused stuff in genksyms.h
o properly ident genksyms.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
genksyms needs to know when a symbol must have a "_" prefex as is
true for a few architectures.
Pass $(ARCH) as commandline argument and hardcode what architectures that
needs this info.
Previous attemt to take it from elfconfig.h was br0ken since elfconfig.h
is a generated file.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The scripts/genksyms/genksyms.c uses hardcoded "__crc_" prefix for
crc symbols in kernel and modules. The prefix should be replaced by
"MODULE_SYMBOL_PREFIX##__crc_" otherwise there will be warnings when
MODULE_SYMBOL_PREFIX is not NULL.
I am sorry my last patch for this issue is actually wrong. I revert
it in this patch.
Signed-off-by: Luke Yang <luke.adi@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
