* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
powerpc/44x: Support 16K/64K base page sizes on 44x
powerpc: Force memory size to be a multiple of PAGE_SIZE
powerpc/32: Wire up the trampoline code for kdump
powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
powerpc/32: Setup OF properties for kdump
powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
powerpc: Prepare xmon_save_regs for use with kdump
powerpc: Remove default kexec/crash_kernel ops assignments
powerpc: Make default kexec/crash_kernel ops implicit
powerpc: Setup OF properties for ppc32 kexec
powerpc/pseries: Fix cpu hotplug
powerpc: Fix KVM build on ppc440
powerpc/cell: add QPACE as a separate Cell platform
powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
powerpc/mpc5200: fix error paths in PSC UART probe function
powerpc/mpc5200: add rts/cts handling in PSC UART driver
powerpc/mpc5200: Make PSC UART driver update serial errors counters
powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
...
Fix trivial conflict in drivers/char/Makefile as per Paul's directions
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (31 commits)
[CIFS] Remove redundant test
[CIFS] make sure that DFS pathnames are properly formed
Remove an already-checked error condition in SendReceiveBlockingLock
Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
[CIFS] Streamline SendReceive[2] by using "goto out:" in an error condition
Slightly streamline SendReceive[2]
Check the return value of cifs_sign_smb[2]
[CIFS] Cleanup: Move the check for too large R/W requests
[CIFS] Slightly simplify wait_for_free_request(), remove an unnecessary "else" branch
Simplify allocate_mid() slightly: Remove some unnecessary "else" branches
[CIFS] In SendReceive, move consistency check out of the mutexed region
cifs: store password in tcon
cifs: have calc_lanman_hash take more granular args
cifs: zero out session password before freeing it
cifs: fix wait_for_response to time out sleeping processes correctly
[CIFS] Can not mount with prefixpath if root directory of share is inaccessible
[CIFS] various minor cleanups pointed out by checkpatch script
[CIFS] fix typo
[CIFS] remove sparse warning
...
Fix trivial conflict in fs/cifs/cifs_fs_sb.h due to comment changes for
the CIFS_MOUNT_xyz bit definitions between cifs updates and security
updates.
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
sched, trace: update trace_sched_wakeup()
tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
Revert "x86: disable X86_PTRACE_BTS"
ring-buffer: prevent false positive warning
ring-buffer: fix dangling commit race
ftrace: enable format arguments checking
x86, bts: memory accounting
x86, bts: add fork and exit handling
ftrace: introduce tracing_reset_online_cpus() helper
tracing: fix warnings in kernel/trace/trace_sched_switch.c
tracing: fix warning in kernel/trace/trace.c
tracing/ring-buffer: remove unused ring_buffer size
trace: fix task state printout
ftrace: add not to regex on filtering functions
trace: better use of stack_trace_enabled for boot up code
trace: add a way to enable or disable the stack tracer
x86: entry_64 - introduce FTRACE_ frame macro v2
tracing/ftrace: add the printk-msg-only option
tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
x86, bts: correctly report invalid bts records
...
Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.
In fs/cifs/cifssmb.c, pLockData is tested for being NULL at the beginning
of the function, and not reassigned subsequently.
A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The paths in a DFS request are supposed to only have a single preceding
backslash, but we are sending them with a double backslash. This is
exposing a bug in Windows where it also sends a path in the response
that has a double backslash.
The existing code that builds the mount option string however expects a
double backslash prefix in a couple of places when it tries to use the
path returned by build_path_from_dentry. Fix compose_mount_options to
expect properly formed DFS paths (single backslash at front).
Also clean up error handling in that function. There was a possible
NULL pointer dereference and situations where a partially built option
string would be returned.
Tested against Samba 3.0.28-ish server and Samba 3.3 and Win2k8.
CC: Stable <stable@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Remove an already-checked error condition in SendReceiveBlockingLock
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Slightly streamline SendReceive[2]
Remove an else branch by naming the error condition what it is
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This is no functional change, because in the "if" branch we do an early
"return 0;".
Signed-off-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Simplify allocate_mid() slightly: Remove some unnecessary "else" branches
Signed-off-by: Volker Lendecke <vl@samba.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
inbuf->smb_buf_length does not change in in wait_for_free_request() or in
allocate_mid(), so we can check it early.
Signed-off-by: Volker Lendecke <vl@samba.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: store password in tcon
Each tcon has its own password for share-level security. Store it in
the tcon and wipe it clean and free it when freeing the tcon. When
doing the tree connect with share-level security, use the tcon password
instead of the session password.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: have calc_lanman_hash take more granular args
We need to use this routine to encrypt passwords associated with the
tcon too. Don't assume that the password will be attached to the
smb_session.
Also, make some of the values in the lower encryption functions
const since they aren't changed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: zero out session password before freeing it
...just to be on the safe side.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: fix wait_for_response to time out sleeping processes correctly
The current scheme that CIFS uses to sleep and wait for a response is
not quite what we want. After sending a request, wait_for_response puts
the task to sleep with wait_event(). One of the conditions for
wait_event is a timeout (using time_after()).
The problem with this is that there is no guarantee that the process
will ever be woken back up. If the server stops sending data, then
cifs_demultiplex_thread will leave its response queue sleeping.
I think the only thing that saves us here is the fact that
cifs_dnotify_thread periodically (every 15s) wakes up sleeping processes
on all response_q's that have calls in flight. This makes for
unnecessary wakeups of some processes. It also means large variability
in the timeouts since they're all woken up at once.
Instead of this, put the tasks to sleep with wait_event_timeout. This
makes them wake up on their own if they time out. With this change,
cifs_dnotify_thread should no longer be needed.
I've been testing this in conjunction with some other patches that I'm
working on. It doesn't seem to affect performance at all with with heavy
I/O. Identical iozone -ac runs complete in almost exactly the same time
(<1% difference in times).
Thanks to Wasrshi Nimara for initially pointing this out. Wasrshi, it
would be nice to know whether this patch also helps your testcase.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Wasrshi Nimara <warshinimara@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Windows allows you to deny access to the top of a share, but permit access to
a directory lower in the path. With the prefixpath feature of cifs
(ie mounting \\server\share\directory\subdirectory\etc.) this should have
worked if the user specified a prefixpath which put the root of the mount
at a directory to which he had access, but we still were doing a lookup
on the root of the share (null path) when we should have been doing it on
the prefixpath subdirectory.
This fixes Samba bug # 5925
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Some applications/subsystems require mandatory byte range locks
(as is used for Windows/DOS/OS2 etc). Sending advisory (posix style)
byte range lock requests (instead of mandatory byte range locks) can
lead to problems for these applications (which expect that other
clients be prevented from writing to portions of the file which
they have locked and are updating). This mount option allows
mounting cifs with the new mount option "forcemand" (or
"forcemandatorylock") in order to have the cifs client use mandatory
byte range locks (ie SMB/CIFS/Windows/NTFS style locks) rather than
posix byte range lock requests, even if the server would support
posix byte range lock requests. This has no effect if the server
does not support the CIFS Unix Extensions (since posix style locks
require support for the CIFS Unix Extensions), but for mounts
to Samba servers this can be helpful for Wine and applications
that require mandatory byte range locks.
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
In order to unify the smb_send routines, we need to reorganize the
routines that connect the sockets. Have ipv4_connect take a
TCP_Server_Info pointer and get the necessary fields from that.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
struct smb_vol is fairly large, it's probably best to kzalloc it...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Clean up cifs_mount a bit by moving the code that creates new TCP
sessions into a separate function. Have that function search for an
existing socket and then create a new one if one isn't found.
Also reorganize the initializion of TCP_Server_Info a bit to prepare
for cleanup of the socket connection code.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The current code for setting the session serverName is IPv4-specific.
Allow it to be an IPv6 address as well. Use NIP* macros to set the
format.
This also entails increasing the length of the serverName field, so
declare a new macro for RFC1001 name length and use it in the
appropriate places.
Finally, drop the unicode_server_Name field from TCP_Server_Info since
it's not used. We can add it back later if needed, but for now it just
wastes memory.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Now that tasks sleeping in wait_for_response will time out on their own,
we're not reliant on the dnotify thread to do this. Mark it as
experimental code for now.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifsd can outlive the last cifs mount. We need to hold a module
reference until it exits to prevent someone from unplugging
the module until we're ready.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Have cifs_show_options display the addr and prefixpath options in
/proc/mounts. Reduce struct dereferencing by adding some local
variables.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
arch_setup_additional_pages currently gets two arguments, the binary
format descripton and an indication if the process uses an executable
stack or not. The second argument is not used by anybody, it could
be removed without replacement.
What actually does make sense is to pass an indication if the process
uses the elf interpreter or not. The glibc code will not use anything
from the vdso if the process does not use the dynamic linker, so for
statically linked binaries the architecture backend can choose not
to map the vdso.
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stephen Rothwell reported this new (harmless) build warning on platforms that
define u64 to long:
fs/proc/base.c: In function 'proc_pid_schedstat':
fs/proc/base.c:352: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64'
asm-generic/int-l64.h platforms strike again: that file should be eliminated.
Fix it by casting the parameters to long long.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since v9ses->uid is unsigned, it would seem better to use simple_strtoul that
simple_strtol.
A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r2@
long e;
position p;
@@
e = simple_strtol@p(...)
@@
position p != r2.p;
type T;
T e;
@@
e =
- simple_strtol@p
+ simple_strtoul
(...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
d_iname is rubbish for long file names.
Use d_name.name in printks instead.
Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Pass mount flags to security_sb_kern_mount(), so security modules
can determine if a mount operation is being performed by the kernel.
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Impact: simplify code
When we turn on CONFIG_SCHEDSTATS, per-task cpu runtime is accumulated
twice. Once in task->se.sum_exec_runtime and once in sched_info.cpu_time.
These two stats are exactly the same.
Given that task->se.sum_exec_runtime is always accumulated by the core
scheduler, sched_info can reuse that data instead of duplicate the accounting.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
