1
Commit Graph

131292 Commits

Author SHA1 Message Date
Jie Zhang
3aee91bafe Blackfin arch: fix 2 bugs related to debug
- unable to single step over emuexcpt instruction
 - gdbproxy goes into infinite loop when doing gdb does "next" over
   "emuexcpt"

Don't decrement PC after software breakpoint.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Bryan Wu
1c302b6ccb Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Graf Yang
9960aa6a07 Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
bss_l2 section is garbage when the data in this section is used by
_bfin_relocate_l1_mem, so move the zero out function ahead.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
be1d8543a8 Blackfin arch: base SIC_IWR# programming on whether the MMR exists
base SIC_IWR# programming on whether the MMR exists
rather than having to maintain another list of processors

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
ed1fb6048c Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
7f6678c52f Blackfin arch: fixup board init function name
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
2678479c33 Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this
already by stubbing things out

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
a6595bf04b Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
adab7eb883 Blackfin arch: sync reboot handler with version in u-boot
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Michael Hennerich
aa9c33b496 Blackfin arch: Faster Implementation of csum_tcpudp_nofold()
Avoid conditional branch instructions during carry bit additions.
Special thanks to Bernd.
Simplify: Use ((len + proto) << 8) like every other __LITTLE_ENDIAN__ machine

Cc: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Graf Yang
0ce5eaf8ec Blackfin arch: Fix bug - BF518 port F, G, and H have different mux offset compare to BF527
[Mike Frysinger <vapier.adi@gmail.com>: keep the ifdef nest down]

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Grace Pan
047481f348 Blackfin arch: Add in cflag to support mlong-calls for kgdb_test
Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Sonic Zhang
b52dae3139 Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd
[Mike Frysinger <vapier.adi@gmail.com>:
 - setup P_DEFAULT_BOOT_SPI_CS  for every arch based on
   the default bootrom behavior and convert all our boards
   to it
 - revert previous anomaly change ... bf51x is not affected
   by anomaly 05000353]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
5b93e13ffa MAINTIANERS: Blackfin: remove subscribers-only marking
remove subscribers-only marking as the list is
automatically & silently moderated for people

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Robin Getz
3605fb0965 Blackfin arch: Add ability to count and display number of NMI interrupts
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Robin Getz
0be5893914 Blackfin arch: Add a few more instructions that can cause the trace buffer to be discontiguous
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Robin Getz
e48df47c1a Blackfin arch: Fix URL
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
f556309ea0 Blackfin arch: cleanup bf54x ifdef mess in gpio code
merge more of the bf54x and !bf54x gpio code together to
cut down on #ifdef mess

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Jie Zhang
881eb621fc Blackfin arch: Add one more check on `fp' to prevent double fault
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Uwe Kleine-Koenig
45c4f2a0b6 Blackfin arch: explicit add a might sleep to gpio_free
According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This patch changes the gpio_free implementations for the blackfin
architecture.

Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-02-04 17:02:30 +08:00
Robin Getz
2f95d5bd84 Blackfin arch: don't accidently re-enable interrupts
Make sure we don't accidently re-enable interrupts if we are being
called in atomic context

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Robin Getz
76e8fe4da6 Blackfin arch: Print out where the bootmode is coming from (for easier debugging).
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Michael Hennerich
a2be393114 Blackfin arch: reset POLAR setting when acquiring a gpio for the first time
when requesting a GPIO for the first time, the POLAR setting is not
set to a sane state.  this can lead to indeterminate behavior that
cannot be resolved without an explicit write to the Blackfin port POLAR
register.

when requesting a GPIO for the first time via gpio_request(), the POLAR
setting for the GPIO in question should be set to sane state.  this
should occur if the GPIO has not been allocated in any other way.

some examples:
 - when doing something like "request_irq(); gpio_request();" on the
   same GPIO, the POLAR setting should not be reset.
 - when doing "gpio_request(); gpio_request();" on the same GPIO, the
   POLAR setting should be reset only the first time and not the second.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Michael Hennerich
5e7bb132bb Blackfin arch: Fix Bug - request lines with peripheral_request_list, but don't get freed with peripheral_free_list
Remove erroneous check_gpio(ident) in peripheral_free()

Reported-by: Michael McTernan <mmcternan@airvana.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Michael Hennerich
331693129d Blackfin arch: Fix Bug - Kernel does not boot if re-program clocks
On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data
path width, typically set 0 for a 32-bit bus width. On other
Blackfin derivatives this bit should be set by default.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
41245ac595 Blackfin arch: fix bug - Dmacopy failed in BF537-STAMP
Dmacopy failed in BF537-STAMP when copy from SRAM to SDRAM and kernel
will reboot automatically.

Fixing by doing a SSYNC before mucking with DMA registers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Sonic Zhang
c6bbd8ac54 Blackfin arch: enable bfin_eth in bf51x by default
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
4c4073d49f Blackfin arch: line up machine-/cpu- vars after BF54xM addition
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
2f89c0632f Blackfin arch: add support for mobile ddr bf54x parts
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger
d352264867 Blackfin arch: scrub comments/whitespace/cvs keywords
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Thomas Renninger
62663ea822 ACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries
They were long enough set deprecated...

Update Documentation/cpu-freq/users-guide.txt:
The deprecated files listed there seen not to exist for some time anymore
already.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-04 00:12:24 -05:00
Len Brown
5ec5d38a1c ACPI: make some IO ports off-limits to AML
ACPICA exports acpi_os_validate_address() so the OS
can prevent BIOS AML from accessing specified addresses.

Start using this interface to prevent AML from accessing
some well known IO addresses that the OS "owns".

Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-03 22:52:12 -05:00
Borislav Petkov
858770619d x86: APIC: enable workaround on AMD Fam10h CPUs
Impact: fix to enable APIC for AMD Fam10h on chipsets with a missing/b0rked
	ACPI MP table (MADT)

Booting a 32bit kernel on an AMD Fam10h CPU running on chipsets with
missing/b0rked MP table leads to a hang pretty early in the boot process
due to the APIC not being initialized. Fix that by falling back to the
default APIC base address in 32bit code, as it is done in the 64bit
codepath.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-03 18:09:33 -08:00
Jeremy Fitzhardinge
06fc732c33 xen: disable interrupts before saving in percpu
Impact: Fix race condition

xen_mc_batch has a small preempt race where it takes the address of a
percpu variable immediately before disabling interrupts, thereby
leaving a small window in which we may migrate to another cpu and save
the flags in the wrong percpu variable.  Disable interrupts before
saving the old flags in a percpu.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-03 17:22:40 -08:00
Artem Bityutskiy
dcf6a79dda write-back: fix nr_to_write counter
Commit 05fe478dd0 introduced some
@wbc->nr_to_write breakage.

It made the following changes:
 1. Decrement wbc->nr_to_write instead of nr_to_write
 2. Decrement wbc->nr_to_write _only_ if wbc->sync_mode == WB_SYNC_NONE
 3. If synced nr_to_write pages, stop only if if wbc->sync_mode ==
    WB_SYNC_NONE, otherwise keep going.

However, according to the commit message, the intention was to only make
change 3.  Change 1 is a bug.  Change 2 does not seem to be necessary,
and it breaks UBIFS expectations, so if needed, it should be done
separately later.  And change 2 does not seem to be documented in the
commit message.

This patch does the following:
 1. Undo changes 1 and 2
 2. Add a comment explaining change 3 (it very useful to have comments
    in _code_, not only in the commit).

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-03 16:59:08 -08:00
Samuel Thibault
5193535517 Fix my email address in qd65xx.[ch]/pata_qdi.c
The @fnac.net will be shut down within a couple of months, so fix my
email address.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-03 16:53:56 -08:00
Linus Torvalds
f96c08e8c5 Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: remove fast unmounting
  UBIFS: return sensible error codes
  UBIFS: remount ro fixes
  UBIFS: spelling fix 'date' -> 'data'
  UBIFS: sync wbufs after syncing inodes and pages
  UBIFS: fix LPT out-of-space bug (again)
  UBIFS: fix no_chk_data_crc
  UBIFS: fix assertions
  UBIFS: ensure orphan area head is initialized
  UBIFS: always clean up GC LEB space
  UBIFS: add re-mount debugging checks
  UBIFS: fix LEB list freeing
  UBIFS: simplify locking
  UBIFS: document dark_wm and dead_wm better
  UBIFS: do not treat all data as short term
  UBIFS: constify operations
  UBIFS: do not commit twice
2009-02-03 16:52:44 -08:00
Linus Torvalds
7420b73dc0 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  NVRAM depends on RTC_DRV_CMOS
  rename platform_driver name "flash" to "sa1100-mtd"
  annotate that [fp, #-4] is the saved lr
  Use __SPIN_LOCK_UNLOCKED to initialize bad_irq_desc.lock
  ARM: OMAP: fix fault in enter_full_retention()
  ARM: OMAP: Mask interrupts when disabling interrupts, v2
  ARM: OMAP: gptimer min_delta_ns corrected
  ARM: OMAP: Fix hsmmc init, v2
  ARM: OMAP: Fix omap34xx revision detection for ES3.1
  ARM: OMAP: DMA: Fix uninitialized channel flags
  ARM: OMAP: Fix race in OMAP2/3 DMA IRQ handling
  ARM: OMAP: Fix McBSP spin_lock deadlock
  [ARM] 5366/1: fix shared memory coherency with VIVT L1 + L2 caches
  [ARM] call undefined instruction exception handler with irqs enabled
  [ARM] msm: fix build errors
  [ARM] etherh: continue fixing build failure
2009-02-03 16:52:10 -08:00
Linus Torvalds
3e1c400513 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: add quota call to ocfs2_remove_btree_range()
  ocfs2: Wakeup the downconvert thread after a successful cancel convert
  ocfs2: Access the xattr bucket only before modifying it.
  configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()
  ocfs2: Fix possible deadlock in ocfs2_write_dquot()
  ocfs2: Push out dropping of dentry lock to ocfs2_wq
2009-02-03 16:50:20 -08:00
Linus Torvalds
b987e8e5a9 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  [XFS] Warn on transaction in flight on read-only remount
  xfs: Check buffer lengths in log recovery
  don't reallocate sxp variable passed into xfs_swapext
2009-02-03 16:49:54 -08:00
David S. Miller
9b02605826 sparc64: Kill bogus TPC/address truncation during 32-bit faults.
This builds upon eeabac7386
("sparc64: Validate kernel generated fault addresses on sparc64.")

Upon further consideration, we actually should never see any
fault addresses for 32-bit tasks with the upper 32-bits set.

If it does every happen, by definition it's a bug.  Whatever
context created that fault would only have that fault satisfied
if we used the full 64-bit address.  If we truncate it, we'll
always fault the wrong address and we'll always loop faulting
forever.

So catch such conditions and mark them as errors always.  Log
the error and fail the fault.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03 16:28:23 -08:00
Randy Dunlap
55128bc23e sunrpc: fix rdma dependencies
Fix sunrpc/rdma build dependencies.
Survives 12 build combinations of INET, IPV6, SUNRPC,
INFINIBAND, and INFINIBAND_ADDR_TRANS.

ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_connect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_destroy_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_resolve_route" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_resolve_addr" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_accept" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_listen" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_bind_addr" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03 15:20:13 -08:00
Karsten Keil
4d7155b932 e1000: Fix PCI enable to honor the need_ioport flag
On machine were no IO ports are assigned the call
to pci_enable_device() will fail, even if need_ioport
is false, we need to use pci_enable_device_mem() here.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03 15:18:01 -08:00
Dean Nelson
714c48f1bb sgi-xp: link XPNET's net_device_ops to its net_device structure
A recent patch by Stephen Hemminger to convert XPNET to use net_device_ops and
internal net_device_stats failed to link the net_device_ops structure to the
net_device structure. See commit e8ac9c55f2
("xpnet: convert devices to new API").

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03 15:16:48 -08:00
Cord Walter
a9d3a14692 pcnet_cs: Fix misuse of the equality operator.
Signed-off-by: Cord Walter <qord@cwalter.net>
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03 15:14:05 -08:00
Filip Aben
67dd82462d hso: add new device id's
This patch adds a few device ID's. It also removes an ID that was used
in an internal engineering version of a device and will never see
commercial light. Even if this ID will be 'recycled' in the future,
which is very unlikely, we don't know what kind of device will be
behind it. Therefore it's safer to remove it.

Signed-off-by: Filip Aben <f.aben@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03 15:13:26 -08:00
Len Brown
3e0676a9b6 ACPICA: add debug dump of BIOS _OSI strings
on boot, print out the OSI strings the BIOS uses to query the OS.

To see this output...

build with CONFIG_ACPI_DEBUG

boot with
"acpi.debug_level=4" (ACPI_LV_INFO) (enabled by default)
and
"acpi.debug_level=1" (ACPI_UTILITIES) (default is 0)

example output:

ACPI: BIOS _OSI(Windows 2001) supported
ACPI: BIOS _OSI(Windows 2001 SP1) supported
ACPI: BIOS _OSI(Windows 2001 SP2) supported
ACPI: BIOS _OSI(Windows 2006) supported
ACPI: BIOS _OSI(Linux) not-supported
ACPI: BIOS _OSI(FreeBSD) not-supported

Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-03 18:12:35 -05:00
Oleg Nesterov
229c4ef8ae ftrace: do_each_pid_task() needs rcu lock
"ftrace: use struct pid" commit 978f3a45d9
converted ftrace_pid_trace to "struct pid*".

But we can't use do_each_pid_task() without rcu_read_lock() even if
we know the pid itself can't go away (it was pinned in ftrace_pid_write).
The exiting task can detach itself from this pid at any moment.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 22:50:58 +01:00
Felix Blyakher
43f3f057c5 [XFS] Warn on transaction in flight on read-only remount
Till VFS can correctly support read-only remount without racing,
use WARN_ON instead of BUG_ON on detecting transaction in flight
after quiescing filesystem.

Signed-off-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-02-03 11:04:54 -06:00
Dave Chinner
6139a23609 xfs: Check buffer lengths in log recovery
Before trying to obtain, read or write a buffer,
check that the buffer length is actually valid. If
it is not valid, then something read in the recovery
process has been corrupted and we should abort
recovery.

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-02-03 11:01:32 -06:00