&err points to the proper error set by bt_skb_send_alloc() when it
fails.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
The Bluetooth core uses the the BD_ADDR in the opposite order from the
human readable order. So we are changing batostr() to print in the
correct order and then removing some baswap(), as they are not needed
anymore.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
A value was attributed to 'src', but no one was using.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
BLUETOOTH SPECIFICATION Version 4.0 [Vol 3] page 36 mentioned
"Note: Start Fragments always begin with the Basic L2CAP header
of a PDU."
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Current Bluetooth code assembles fragments of big L2CAP packets
in l2cap_recv_acldata and then checks allowed L2CAP size in
assemled L2CAP packet (pi->imtu < skb->len).
The patch moves allowed L2CAP size check to the early stage when
we receive the first fragment of L2CAP packet. We do not need to
reserve and keep L2CAP fragments for bad packets.
Updated version after comments from Mat Martineau <mathewm@codeaurora.org>
and Gustavo Padovan <padovan@profusion.mobi>.
Trace below is received when using stress tools sending big
fragmented L2CAP packets.
...
[ 1712.798492] swapper: page allocation failure. order:4, mode:0x4020
[ 1712.804809] [<c0031870>] (unwind_backtrace+0x0/0xdc) from [<c00a1f70>]
(__alloc_pages_nodemask+0x4)
[ 1712.814666] [<c00a1f70>] (__alloc_pages_nodemask+0x47c/0x4d4) from
[<c00a1fd8>] (__get_free_pages+)
[ 1712.824645] [<c00a1fd8>] (__get_free_pages+0x10/0x3c) from [<c026eb5c>]
(__alloc_skb+0x4c/0xfc)
[ 1712.833465] [<c026eb5c>] (__alloc_skb+0x4c/0xfc) from [<bf28c738>]
(l2cap_recv_acldata+0xf0/0x1f8 )
[ 1712.843322] [<bf28c738>] (l2cap_recv_acldata+0xf0/0x1f8 [l2cap]) from
[<bf0094ac>] (hci_rx_task+0x)
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Clearing the blacklist in hci_dev_do_close() would mean that user space
needs to do extra work to re-block devices after a DEVDOWN-DEVUP cycle.
This patch removes the clearing of the blacklist in this case and
thereby saves user space from the extra work.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Acked-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
L2CAP ERTM sockets can be opened with the SOCK_STREAM socket type,
which is a mandatory request for ERTM mode.
However, these sockets still have SOCK_SEQPACKET read semantics when
bt_sock_recvmsg() is used to pull data from the receive queue. If the
application is only reading part of a frame, then the unread portion
of the frame is discarded. If the application requests more bytes
than are in the current frame, only the current frame's data is
returned.
This patch utilizes common code derived from RFCOMM's recvmsg()
function to make L2CAP SOCK_STREAM reads behave like RFCOMM reads (and
other SOCK_STREAM sockets in general). The application may read one
byte at a time from the input stream and not lose any data, and may
also read across L2CAP frame boundaries.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
To reduce code duplication, have rfcomm_sock_recvmsg() call
bt_sock_stream_recvmsg(). The common bt_sock_stream_recvmsg()
code is nearly identical, with the RFCOMM-specific functionality
for deferred setup and connection unthrottling left in
rfcomm_sock_recvmsg().
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
This commit adds a bt_sock_stream_recvmsg() function for use by any
Bluetooth code that uses SOCK_STREAM sockets. This code is copied
from rfcomm_sock_recvmsg() with minimal modifications to remove
RFCOMM-specific functionality and improve readability.
L2CAP (with the SOCK_STREAM socket type) and RFCOMM have common needs
when it comes to reading data. Proper stream read semantics require
that applications can read from a stream one byte at a time and not
lose any data. The RFCOMM code already operated on and pulled data
from the underlying L2CAP socket, so very few changes were required to
make the code more generic for use with non-RFCOMM data over L2CAP.
Applications that need more awareness of L2CAP frame boundaries are
still free to use SOCK_SEQPACKET sockets, and may verify that they
connection did not fall back to basic mode by calling getsockopt().
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Valid L2CAP PSMs are odd numbers, and the least significant bit of the
most significant byte must be 0.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
According to the ETSI 3GPP TS 07.10 the default bit rate value for RFCOMM
is 9600 bit/s. Return this bit rate in case of RPN request and accept other
sane bit rates proposed by the sender in RPM command.
Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
HCI transport drivers may not know what type of radio an AMP device has
so only say whether they're BR/EDR or AMP devices.
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
L2CAP doesn't permit change like MTU, FCS, TxWindow values while the
connection is alive, we can only set that before the
connection/configuration process. That can lead to bugs in the L2CAP
operation.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
This reverts commit 8cb8e6f168.
That commit introduced a regression with the Bluetooth Profile Tuning
Suite(PTS), Reverting this make sure that L2CAP is in a qualificable
state.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
As we don't have any error control on the Streaming mode, i.e., we don't
need to keep a copy of the skb for later resending we don't need to
call skb_clone() on it.
Then we can go one further here, and dequeue the skb before sending it,
that also means we don't need to look to sk->sk_send_head anymore.
The patch saves memory and time when sending Streaming mode data, so
it is good to mainline.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
When receiving L2CAP negative configuration response with respect
to MTU parameter we modify wrong field. MTU here means proposed
value of MTU that the remote device intends to transmit. So for local
L2CAP socket it is pi->imtu.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
This fixes a bug which caused the FCS setting to show L2CAP_FCS_CRC16
with L2CAP modes other than ERTM or streaming. At present, this only
affects the FCS value shown with getsockopt() for basic mode.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Change "return (EXPR);" to "return EXPR;"
return is not a function, parentheses are not required.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to test twice sk->sk_shutdown & RCV_SHUTDOWN
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
remote_tx_win is intended to be set on receipt of an L2CAP
configuration request. The value is used to determine the size of the
transmit window on the remote side of an ERTM connection, so L2CAP
can stop sending frames when that remote window is full.
An incorrect remote_tx_win value will cause the stack to not fully
utilize the tx window (performance impact), or to overfill the remote
tx window (causing dropped frames or a disconnect).
This patch removes an extra setting of remote_tx_win when a
configuration response is received. The transmit window has a
different meaning in a response - it is an informational value
less than or equal to the local tx_win.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Incoming configuration values must be converted to native CPU order
before use. This fixes a bug where a little-endian MPS value is
compared to a native CPU value. On big-endian processors, this
can cause ERTM and streaming mode segmentation to produce PDUs
that are larger than the remote stack is expecting, or that would
produce fragmented skbs that the current FCS code cannot handle.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Check result code of L2CAP information response. Otherwise
it would read invalid feature mask and access invalid memory.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If the remote side doesn't support Enhanced Retransmission Mode neither
Streaming Mode, we shall not send the RFC option.
Some devices that only supports Basic Mode do not understanding the RFC
option. This patch fixes the regression found with these devices.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
rfcomm_cleanup_ttys() is also called from rfcomm_init(), so it can't
have __exit.
Reported-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The bdaddr in the list root is completely unused and just
taking up space.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Those annotation save memory and space on the binary. __init code is
discarded just after execute and __exit code is discarded if the module
is built into the kernel image or unload of modules is not allowed.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Testing first we avoid enter the loop when count = 0.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Change the enable_ertm param to disable_ertm and default value to 0. That
means that L2CAP Extended features are enabled by default now.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Modified packet based reassembly function hci_recv_fragment() to use
hci_reassembly()
Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Implements feature to reassemble received HCI frames from any input stream
Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We did some changes on the L2CAP configuration process and its behaviour
is bit different now. That justifies a updated on the L2CAP version.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright for the time I worked on L2CAP during the Google Summer of Code
program.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Purely a cosmetic change, it doesn't change the code flow.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Probably a typo error. We were using the wrong struct to get size.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The extended L2CAP features requires that one should initiate a
ConfigReq after send the ConnectionRsp. This patch changes the behaviour
of the configuration process of our stack.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
L2CAP only deals with ACL links. EINVAL should be returned otherwise.
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the socket is in a bad state EBADFD is more appropriate then EINVAL.
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When we try to send a message bigger than the outgoing MTU value
EMSGSIZE (message too long) should be returned.
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It doesn't make sense to have a return value since we always set it
to 0.
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Return a proper error value if socket is already connected.
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
