master
16659 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ian Rogers
|
a5384c4267 |
perf cap: Add __NR_capget to arch/x86 unistd
As there are duplicated kernel headers in tools/include libc can pick
up the wrong definitions. This was causing the wrong system call for
capget in perf.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
55f1b540d8 |
tools headers: Update the linux/unaligned.h copy with the kernel sources
To pick up the changes in:
|
||
|
Arnaldo Carvalho de Melo
|
758f181589 |
perf python: Fix up the build on architectures without HAVE_KVM_STAT_SUPPORT
Noticed while building on a raspbian arm 32-bit system.
There was also this other case, fixed by adding a missing util/stat.h
with the prototypes:
/tmp/tmp.MbiSHoF3dj/perf-6.12.0-rc3/tools/perf/util/python.c:1396:6: error: no previous prototype for ‘perf_stat__set_no_csv_summary’ [-Werror=missing-prototypes]
1396 | void perf_stat__set_no_csv_summary(int set __maybe_unused)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/tmp.MbiSHoF3dj/perf-6.12.0-rc3/tools/perf/util/python.c:1400:6: error: no previous prototype for ‘perf_stat__set_big_num’ [-Werror=missing-prototypes]
1400 | void perf_stat__set_big_num(int set __maybe_unused)
| ^~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
In other architectures this must be building due to some lucky indirect
inclusion of that header.
Fixes:
|
||
|
Veronika Molnarova
|
06a130e42a |
perf test: Handle perftool-testsuite_probe failure due to broken DWARF
Test case test_adding_blacklisted ends in failure if the blacklisted
probe is of an assembler function with no DWARF available. At the same
time, probing the blacklisted function with ASM DWARF doesn't test the
blacklist itself as the failure is a result of the broken DWARF.
When the broken DWARF output is encountered, check if the probed
function was compiled by the assembler. If so, the broken DWARF message
is expected and does not report a perf issue, else report a failure. If
the ASM DWARF affected the probe, try the next probe on the blacklist.
If the first 5 probes are defective due to broken DWARF, skip the test
case.
Fixes:
|
||
|
Jiri Slaby
|
5d35634ecc |
perf trace: Fix non-listed archs in the syscalltbl routines
This fixes a build breakage on 32-bit arm, where the
syscalltbl__id_at_idx() function was missing.
Committer notes:
Generating a proper syscall table from a copy of
arch/arm/tools/syscall.tbl ends up being too big a patch for this rc
stage, I started doing it but while testing noticed some other problems
with using BPF to collect pointer args on arm7 (32-bit) will maybe
continue trying to make it work on the next cycle...
Fixes:
|
||
|
Howard Chu
|
7fbff3c0e0 |
perf build: Change the clang check back to 12.0.1
This serves as a revert for this patch: https://lore.kernel.org/linux-perf-users/ZuGL9ROeTV2uXoSp@x1/ Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: James Clark <james.clark@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241011021403.4089793-2-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Howard Chu
|
395d38419f |
perf trace augmented_raw_syscalls: Add more checks to pass the verifier
Add some more checks to pass the verifier in more kernels. Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241011021403.4089793-3-howardchu95@gmail.com [ Reduced the patch removing things that can be done later ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
ecabac70ff |
perf trace augmented_raw_syscalls: Add extra array index bounds checking to satisfy some BPF verifiers
In a RHEL8 kernel (4.18.0-513.11.1.el8_9.x86_64), that, as enterprise
kernels go, have backports from modern kernels, the verifier complains
about lack of bounds check for the index into the array of syscall
arguments, on a BPF bytecode generated by clang 17, with:
; } else if (size < 0 && size >= -6) { /* buffer */
116: (b7) r1 = -6
117: (2d) if r1 > r6 goto pc-30
R0=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=inv-6 R2=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3=inv(id=0) R5=inv40 R6=inv(id=0,umin_value=18446744073709551610,var_off=(0xffffffff00000000; 0xffffffff)) R7=map_value(id=0,off=56,ks=4,vs=8272,imm=0) R8=invP6 R9=map_value(id=0,off=20,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16=map_value fp-24=map_value fp-32=inv40 fp-40=ctx fp-48=map_value fp-56=inv1 fp-64=map_value fp-72=map_value fp-80=map_value
; index = -(size + 1);
118: (a7) r6 ^= -1
119: (67) r6 <<= 32
120: (77) r6 >>= 32
; aug_size = args->args[index];
121: (67) r6 <<= 3
122: (79) r1 = *(u64 *)(r10 -24)
123: (0f) r1 += r6
last_idx 123 first_idx 116
regs=40 stack=0 before 122: (79) r1 = *(u64 *)(r10 -24)
regs=40 stack=0 before 121: (67) r6 <<= 3
regs=40 stack=0 before 120: (77) r6 >>= 32
regs=40 stack=0 before 119: (67) r6 <<= 32
regs=40 stack=0 before 118: (a7) r6 ^= -1
regs=40 stack=0 before 117: (2d) if r1 > r6 goto pc-30
regs=42 stack=0 before 116: (b7) r1 = -6
R0_w=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=inv1 R2_w=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3_w=inv(id=0) R5_w=inv40 R6_rw=invP(id=0,smin_value=-2147483648,smax_value=0) R7_w=map_value(id=0,off=56,ks=4,vs=8272,imm=0) R8_w=invP6 R9_w=map_value(id=0,off=20,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16_w=map_value fp-24_r=map_value fp-32_w=inv40 fp-40=ctx fp-48=map_value fp-56_w=inv1 fp-64_w=map_value fp-72=map_value fp-80=map_value
parent didn't have regs=40 stack=0 marks
last_idx 110 first_idx 98
regs=40 stack=0 before 110: (6d) if r1 s> r6 goto pc+5
regs=42 stack=0 before 109: (b7) r1 = 1
regs=40 stack=0 before 108: (65) if r6 s> 0x1000 goto pc+7
regs=40 stack=0 before 98: (55) if r6 != 0x1 goto pc+9
R0_w=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=invP12 R2_w=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3_rw=inv(id=0) R5_w=inv24 R6_rw=invP(id=0,smin_value=-2147483648,smax_value=2147483647) R7_w=map_value(id=0,off=40,ks=4,vs=8272,imm=0) R8_rw=invP4 R9_w=map_value(id=0,off=12,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16_rw=map_value fp-24_r=map_value fp-32_rw=invP24 fp-40_r=ctx fp-48_r=map_value fp-56_w=invP1 fp-64_rw=map_value fp-72_r=map_value fp-80_r=map_value
parent already had regs=40 stack=0 marks
124: (79) r6 = *(u64 *)(r1 +16)
R0=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=map_value(id=0,off=0,ks=4,vs=8272,umax_value=34359738360,var_off=(0x0; 0x7fffffff8),s32_max_value=2147483640,u32_max_value=-8) R2=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3=inv(id=0) R5=inv40 R6_w=invP(id=0,umax_value=34359738360,var_off=(0x0; 0x7fffffff8),s32_max_value=2147483640,u32_max_value=-8) R7=map_value(id=0,off=56,ks=4,vs=8272,imm=0) R8=invP6 R9=map_value(id=0,off=20,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16=map_value fp-24=map_value fp-32=inv40 fp-40=ctx fp-48=map_value fp-56=inv1 fp-64=map_value fp-72=map_value fp-80=map_value
R1 unbounded memory access, make sure to bounds check any such access
processed 466 insns (limit 1000000) max_states_per_insn 2 total_states 20 peak_states 20 mark_read 3
If we add this line, as used in other BPF programs, to cap that index:
index &= 7;
The generated BPF program is considered safe by that version of the BPF
verifier, allowing perf to collect the syscall args in one more kernel
using the BPF based pointer contents collector.
With the above one-liner it works with that kernel:
[root@dell-per740-01 ~]# uname -a
Linux dell-per740-01.khw.eng.rdu2.dc.redhat.com 4.18.0-513.11.1.el8_9.x86_64 #1 SMP Thu Dec 7 03:06:13 EST 2023 x86_64 x86_64 x86_64 GNU/Linux
[root@dell-per740-01 ~]# ~acme/bin/perf trace -e *sleep* sleep 1.234567890
0.000 (1234.704 ms): sleep/3863610 nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 234567890 }) = 0
[root@dell-per740-01 ~]#
As well as with the one in Fedora 40:
root@number:~# uname -a
Linux number 6.11.3-200.fc40.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Oct 10 22:31:19 UTC 2024 x86_64 GNU/Linux
root@number:~# perf trace -e *sleep* sleep 1.234567890
0.000 (1234.722 ms): sleep/14873 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 234567890 }, rmtp: 0x7ffe87311a40) = 0
root@number:~#
Song Liu reported that this one-liner was being optimized out by clang
18, so I suggested and he tested that adding a compiler barrier before
it made clang v18 to keep it and the verifier in the kernel in Song's
case (Meta's 5.12 based kernel) also was happy with the resulting
bytecode.
I'll investigate using virtme-ng[1] to have all the perf BPF based
functionality thoroughly tested over multiple kernels and clang
versions.
[1] https://kernel-recipes.org/en/2024/virtme-ng/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/Zw7JgJc0LOwSpuvx@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
39c6a35620 |
perf trace: The return from 'write' isn't a pid
When adding a explicit beautifier for the 'write' syscall when the BPF
based buffer collector was introduced there was a cut'n'paste error that
carried the syscall_fmt->errpid setting from a nearby syscall (waitid)
that returns a pid.
So the write return was being suppressed by the return pretty printer,
remove that field, reverting it back to the default return handler, that
prints positive numbers as-is and interpret negative values as errnos.
I actually introduced the problem while making Howard's original patch
work just with the 'write' syscall, as we couldn't just look for any
buffers, the ones that are filled in by the kernel couldn't use the same
sys_enter BPF collector.
Fixes:
|
||
|
Linus Torvalds
|
b2760b8390 |
perf tools fixes for v6.12:
- Fix an assert() to handle captured and unprocessed ARM CoreSight CPU traces. - Fix static build compilation error when libdw isn't installed or is too old. - Add missing include when building with !HAVE_DWARF_GETLOCATIONS_SUPPORT. - Add missing refcount put on 32-bit DSOs. - Fix disassembly of user space binaries by setting the binary_type of DSO when loading. - Update headers with the kernel sources, including asound.h, sched.h, fcntl, msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's cputype.h. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZwU2dgAKCRCyPKLppCJ+ J8uaAQDEbp0lMf1S/Y6vOGbnP6mGQCewQsXtIpSA4gcRMWlCCgD+O6ZxbnBCHOzn nQfBmbT62qUGuUA38Mg7pCyRXBd8FgU= =s4JZ -----END PGP SIGNATURE----- Merge tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix an assert() to handle captured and unprocessed ARM CoreSight CPU traces - Fix static build compilation error when libdw isn't installed or is too old - Add missing include when building with !HAVE_DWARF_GETLOCATIONS_SUPPORT - Add missing refcount put on 32-bit DSOs - Fix disassembly of user space binaries by setting the binary_type of DSO when loading - Update headers with the kernel sources, including asound.h, sched.h, fcntl, msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's cputype.h * tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf cs-etm: Fix the assert() to handle captured and unprocessed cpu trace perf build: Fix build feature-dwarf_getlocations fail for old libdw perf build: Fix static compilation error when libdw is not installed perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORT tools headers arm64: Sync arm64's cputype.h with the kernel sources perf tools: Cope with differences for lib/list_sort.c copy from the kernel tools check_headers.sh: Add check variant that excludes some hunks perf beauty: Update copy of linux/socket.h with the kernel sources tools headers UAPI: Sync the linux/in.h with the kernel sources perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools include UAPI: Sync linux/fcntl.h copy with the kernel sources tools include UAPI: Sync linux/sched.h copy with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources perf vdso: Missed put on 32-bit dsos perf symbol: Set binary_type of dso when loading |
||
|
Al Viro
|
5f60d5f6bb |
move asm/unaligned.h to linux/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h |
||
|
Ilkka Koskinen
|
e934a35e3c |
perf cs-etm: Fix the assert() to handle captured and unprocessed cpu trace
If one builds perf with DEBUG=1, captures data on multiple CPUs and
finally runs 'perf report -C <cpu>' for only one of the cpus, assert()
aborts the program. This happens because there are empty queues with
format set.
This patch changes the condition to abort only if a queue is not empty
and if the format is unset.
$ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install
$ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1
$ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1
Aborted (core dumped)
Fixes:
|
||
|
Yang Jihong
|
a530337ba9 |
perf build: Fix build feature-dwarf_getlocations fail for old libdw
For libdw versions below 0.177, need to link libdl.a in addition to
libbebl.a during static compilation, otherwise
feature-dwarf_getlocations compilation will fail.
Before:
$ make LDFLAGS=-static
BUILD: Doing 'make -j20' parallel build
<SNIP>
Makefile.config:483: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157
<SNIP>
$ cat ../build/feature/test-dwarf_getlocations.make.output
/usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libebl.a(eblclosebackend.o): in function `ebl_closebackend':
(.text+0x20): undefined reference to `dlclose'
collect2: error: ld returned 1 exit status
After:
$ make LDFLAGS=-static
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
$ ./perf probe
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
or: perf probe [<options>] --del '[GROUP:]EVENT' ...
or: perf probe --list [GROUP:]EVENT ...
<SNIP>
Fixes:
|
||
|
Yang Jihong
|
43f6564f18 |
perf build: Fix static compilation error when libdw is not installed
If libdw is not installed in build environment, the output of
'pkg-config --modversion libdw' is empty, causing LIBDW_VERSION_2 to be
empty and the shell test will have the following error:
/bin/sh: 1: test: -lt: unexpected operator
Before:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
/bin/sh: 1: test: -lt: unexpected operator
After:
1. libdw is not installed:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
Makefile.config:473: No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR
2. libdw version is lower than 0.177
$ pkg-config --modversion libdw
0.176
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
INSTALL libsubcmd_headers
INSTALL libapi_headers
INSTALL libperf_headers
INSTALL libsymbol_headers
INSTALL libbpf_headers
LINK perf
3. libdw version is higher than 0.177
$ pkg-config --modversion libdw
0.186
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
CC util/bpf-utils.o
CC util/pfm.o
LD util/perf-util-in.o
LD perf-util-in.o
AR libperf-util.a
LINK perf
Fixes:
|
||
|
James Clark
|
008979cc69 |
perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORT
The linked fixes commit added an #include "dwarf-aux.h" to disasm.h
which gets picked up in a lot of places. Without
HAVE_DWARF_GETLOCATIONS_SUPPORT the stubs return an errno, so include
errno.h to fix the following build error:
In file included from util/disasm.h:8,
from util/annotate.h:16,
from builtin-top.c:23:
util/dwarf-aux.h: In function 'die_get_var_range':
util/dwarf-aux.h:183:10: error: 'ENOTSUP' undeclared (first use in this function)
183 | return -ENOTSUP;
| ^~~~~~~
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
36110669dd |
perf tools: Cope with differences for lib/list_sort.c copy from the kernel
With
|
||
|
Arnaldo Carvalho de Melo
|
cd46ea5ab4 |
tools check_headers.sh: Add check variant that excludes some hunks
With
|
||
|
Arnaldo Carvalho de Melo
|
d164868879 |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in:
|
||
|
Arnaldo Carvalho de Melo
|
c94cd9508b |
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
To pick up the change in:
|
||
|
Arnaldo Carvalho de Melo
|
58f969b7a8 |
tools include UAPI: Sync linux/fcntl.h copy with the kernel sources
Picking the changes from: |
||
|
Arnaldo Carvalho de Melo
|
7ae76b32f9 |
tools include UAPI: Sync linux/sched.h copy with the kernel sources
Picking the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
c850897b6c |
tools include UAPI: Sync sound/asound.h copy with the kernel sources
Picking the changes from:
|
||
|
Ian Rogers
|
424aafb61a |
perf vdso: Missed put on 32-bit dsos
If the dso type doesn't match then NULL is returned but the dso should
be put first.
Fixes:
|
||
|
Namhyung Kim
|
5363c30678 |
perf symbol: Set binary_type of dso when loading
For the kernel dso, it sets the binary type of dso when loading the symbol table. But it seems not to do that for user DSOs. Actually it sets the symtab type only. It's not clear why we want to maintain the two separately but it uses the binary type info before getting the disassembly. Let's use the symtab type as binary type too if it's not set. I think it's ok to set the binary type when it founds a symsrc whether or not it has actual symbols. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Alexander Monakov <amonakov@ispras.ru> Link: https://lore.kernel.org/r/20240426215139.1271039-1-namhyung@kernel.org Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: LKML <linux-kernel@vger.kernel.org> Cc: <linux-perf-users@vger.kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
1de5b5dcb8 |
perf trace: Mark the 'head' arg in the set_robust_list syscall as coming from user space
With that it uses the generic BTF based pretty printer:
This one we need to think about, not being acquainted with this syscall,
should we _traverse_ that list somehow? Would that be useful?
root@number:~# perf trace -e set_robust_list sleep 1
0.000 ( 0.004 ms): sleep/1206493 set_robust_list(head: (struct robust_list_head){.list = (struct robust_list){.next = (struct robust_list *)0x7f48a9a02a20,},.futex_offset = (long int)-32,}, len: 24) =
root@number:~#
strace prints the default integer args:
root@number:~# strace -e set_robust_list sleep 1
set_robust_list(0x7efd99559a20, 24) = 0
+++ exited with 0 +++
root@number:~#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org
Link: https://lore.kernel.org/lkml/ZuH6MquMraBvODRp@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
0c1019e346 |
perf trace: Mark the 'rseq' arg in the rseq syscall as coming from user space
With that it uses the generic BTF based pretty printer:
root@number:~# grep -w rseq /sys/kernel/tracing/events/syscalls/sys_enter_rseq/format
field:struct rseq * rseq; offset:16; size:8; signed:0;
print fmt: "rseq: 0x%08lx, rseq_len: 0x%08lx, flags: 0x%08lx, sig: 0x%08lx", ((unsigned long)(REC->rseq)), ((unsigned long)(REC->rseq_len)), ((unsigned long)(REC->flags)), ((unsigned long)(REC->sig))
root@number:~#
Before:
root@number:~# perf trace -e rseq
0.000 ( 0.017 ms): Isolated Web C/1195452 rseq(rseq: 0x7ff0ecfe6fe0, rseq_len: 32, sig: 1392848979) = 0
74.018 ( 0.006 ms): :1195453/1195453 rseq(rseq: 0x7f2af20fffe0, rseq_len: 32, sig: 1392848979) = 0
1817.220 ( 0.009 ms): Isolated Web C/1195454 rseq(rseq: 0x7f5c9ec7dfe0, rseq_len: 32, sig: 1392848979) = 0
2515.526 ( 0.034 ms): :1195455/1195455 rseq(rseq: 0x7f61503fffe0, rseq_len: 32, sig: 1392848979) = 0
^Croot@number:~#
After:
root@number:~# perf trace -e rseq
0.000 ( 0.019 ms): Isolated Web C/1197258 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)4,.cpu_id = (__u32)4,.mm_cid = (__u32)5,}, rseq_len: 32, sig: 1392848979) = 0
1663.835 ( 0.019 ms): Isolated Web C/1197259 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)24,.cpu_id = (__u32)24,.mm_cid = (__u32)2,}, rseq_len: 32, sig: 1392848979) = 0
4750.444 ( 0.018 ms): Isolated Web C/1197260 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)8,.cpu_id = (__u32)8,.mm_cid = (__u32)4,}, rseq_len: 32, sig: 1392848979) = 0
4994.132 ( 0.018 ms): Isolated Web C/1197261 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)10,.cpu_id = (__u32)10,.mm_cid = (__u32)1,}, rseq_len: 32, sig: 1392848979) = 0
4997.578 ( 0.011 ms): Isolated Web C/1197263 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)16,.cpu_id = (__u32)16,.mm_cid = (__u32)4,}, rseq_len: 32, sig: 1392848979) = 0
4997.462 ( 0.014 ms): Isolated Web C/1197262 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)17,.cpu_id = (__u32)17,.mm_cid = (__u32)3,}, rseq_len: 32, sig: 1392848979) = 0
^Croot@number:~#
We'll probably need to come up with some way for using the BTF info to
synthesize a test that then gets used and captures the output of the
'perf trace' output to check if the arguments are the ones synthesized,
randomically, for now, lets make do manually:
root@number:~# cat ~acme/c/rseq.c
#include <sys/syscall.h> /* Definition of SYS_* constants */
#include <linux/rseq.h>
#include <errno.h>
#include <string.h>
#include <unistd.h>
#include <stdint.h>
#include <stdio.h>
/* Provide own rseq stub because glibc doesn't */
__attribute__((weak))
int sys_rseq(struct rseq *rseq, __u32 rseq_len, int flags, __u32 sig)
{
return syscall(SYS_rseq, rseq, rseq_len, flags, sig);
}
int main(int argc, char *argv[])
{
struct rseq rseq = {
.cpu_id_start = 12,
.cpu_id = 34,
.rseq_cs = 56,
.flags = 78,
.node_id = 90,
.mm_cid = 12,
};
int err = sys_rseq(&rseq, sizeof(rseq), 98765, 0xdeadbeaf);
printf("sys_rseq({ .cpu_id_start = 12, .cpu_id = 34, .rseq_cs = 56, .flags = 78, .node_id = 90, .mm_cid = 12, }, %d, 0) = %d (%s)\n", sizeof(rseq), err, strerror(errno));
return err;
}
root@number:~# perf trace -e rseq ~acme/c/rseq
sys_rseq({ .cpu_id_start = 12, .cpu_id = 34, .rseq_cs = 56, .flags = 78, .node_id = 90, .mm_cid = 12, }, 32, 0) = -1 (Invalid argument)
0.000 ( 0.003 ms): rseq/1200640 rseq(rseq: (struct rseq){}, rseq_len: 32, sig: 1392848979) =
0.064 ( 0.001 ms): rseq/1200640 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)12,.cpu_id = (__u32)34,.rseq_cs = (__u64)56,.flags = (__u32)78,.node_id = (__u32)90,.mm_cid = (__u32)12,}, rseq_len: 32, flags: 98765, sig: 3735928495) = -1 EINVAL (Invalid argument)
root@number:~#root@number:~# cat ~acme/c/rseq.c
#include <sys/syscall.h> /* Definition of SYS_* constants */
#include <linux/rseq.h>
#include <errno.h>
#include <string.h>
#include <unistd.h>
#include <stdint.h>
#include <stdio.h>
/* Provide own rseq stub because glibc doesn't */
__attribute__((weak))
int sys_rseq(struct rseq *rseq, __u32 rseq_len, int flags, __u32 sig)
{
return syscall(SYS_rseq, rseq, rseq_len, flags, sig);
}
int main(int argc, char *argv[])
{
struct rseq rseq = {
.cpu_id_start = 12,
.cpu_id = 34,
.rseq_cs = 56,
.flags = 78,
.node_id = 90,
.mm_cid = 12,
};
int err = sys_rseq(&rseq, sizeof(rseq), 98765, 0xdeadbeaf);
printf("sys_rseq({ .cpu_id_start = 12, .cpu_id = 34, .rseq_cs = 56, .flags = 78, .node_id = 90, .mm_cid = 12, }, %d, 0) = %d (%s)\n", sizeof(rseq), err, strerror(errno));
return err;
}
root@number:~# perf trace -e rseq ~acme/c/rseq
sys_rseq({ .cpu_id_start = 12, .cpu_id = 34, .rseq_cs = 56, .flags = 78, .node_id = 90, .mm_cid = 12, }, 32, 0) = -1 (Invalid argument)
0.000 ( 0.003 ms): rseq/1200640 rseq(rseq: (struct rseq){}, rseq_len: 32, sig: 1392848979) =
0.064 ( 0.001 ms): rseq/1200640 rseq(rseq: (struct rseq){.cpu_id_start = (__u32)12,.cpu_id = (__u32)34,.rseq_cs = (__u64)56,.flags = (__u32)78,.node_id = (__u32)90,.mm_cid = (__u32)12,}, rseq_len: 32, flags: 98765, sig: 3735928495) = -1 EINVAL (Invalid argument)
root@number:~#
Interesting, glibc seems to be using rseq here, as in addition to the
totally fake one this test case uses, we have this one, around these
other syscalls:
0.175 ( 0.001 ms): rseq/1201095 set_tid_address(tidptr: 0x7f6def759a10) = 1201095 (rseq)
0.177 ( 0.001 ms): rseq/1201095 set_robust_list(head: 0x7f6def759a20, len: 24) = 0
0.178 ( 0.001 ms): rseq/1201095 rseq(rseq: (struct rseq){}, rseq_len: 32, sig: 1392848979) =
0.231 ( 0.005 ms): rseq/1201095 mprotect(start: 0x7f6def93f000, len: 16384, prot: READ) = 0
0.238 ( 0.003 ms): rseq/1201095 mprotect(start: 0x403000, len: 4096, prot: READ) = 0
0.244 ( 0.004 ms): rseq/1201095 mprotect(start: 0x7f6def99c000, len: 8192, prot: READ)
Matches strace (well, not really as the strace in fedora:40 doesn't know
about rseq, printing just integer values in hex):
set_robust_list(0x7fbc6acc7a20, 24) = 0
rseq(0x7fbc6acc8060, 0x20, 0, 0x53053053) = 0
mprotect(0x7fbc6aead000, 16384, PROT_READ) = 0
mprotect(0x403000, 4096, PROT_READ) = 0
mprotect(0x7fbc6af0a000, 8192, PROT_READ) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
munmap(0x7fbc6aebd000, 81563) = 0
rseq(0x7fff15bb9920, 0x20, 0x181cd, 0xdeadbeaf) = -1 EINVAL (Invalid argument)
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(0x88, 0x9), ...}) = 0
getrandom("\xd0\x34\x97\x17\x61\xc2\x2b\x10", 8, GRND_NONBLOCK) = 8
brk(NULL) = 0x18ff4000
brk(0x19015000) = 0x19015000
write(1, "sys_rseq({ .cpu_id_start = 12, ."..., 136sys_rseq({ .cpu_id_start = 12, .cpu_id = 34, .rseq_cs = 56, .flags = 78, .node_id = 90, .mm_cid = 12, }, 32, 0) = -1 (Invalid argument)
) = 136
exit_group(-1) = ?
+++ exited with 255 +++
root@number:~#
And also the focus for the v6.13 should be to have a better, strace
like BTF pretty printer as one of the outputs we can get from the libbpf
BTF dumper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZuH2K1LLt1pIDkbd@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Kan Liang
|
edf3ce0ed3 |
perf env: Find correct branch counter info on hybrid
No event is printed in the "Branch Counter" column on hybrid machines.
For example,
$ perf record -e "{cpu_core/branch-instructions/pp,cpu_core/branches/}:S" -j any,counter
$ perf report --total-cycles
# Branch counter abbr list:
# cpu_core/branch-instructions/pp = A
# cpu_core/branches/ = B
# '-' No event occurs
# '+' Event occurrences may be lost due to branch counter saturated
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles Branch Counter
# ............... .............. ........... .......... ..............
44.54% 727.1K 0.00% 1 |+ |+ |
36.31% 592.7K 0.00% 2 |+ |+ |
17.83% 291.1K 0.00% 1 |+ |+ |
The branch counter information (br_cntr_width and br_cntr_nr) in the
perf_env is retrieved from the CPU_PMU_CAPS. However, the CPU_PMU_CAPS
is not available on hybrid machines. Without the width information, the
number of occurrences of an event cannot be calculated.
For a hybrid machine, the caps information should be retrieved from the
PMU_CAPS, and stored in the perf_env->pmu_caps.
Add a perf_env__find_br_cntr_info() to return the correct branch counter
information from the corresponding fields.
Committer notes:
While testing I couldn't s ee those "Branch counter" columns enabled by
pressing 'B' on the TUI, after reporting it to the list Kan explained
the situation:
<quote Kan Liang>
For a hybrid client, the "Branch Counter" feature is only supported
starting from the just released Lunar Lake. Perf falls back to only
"ANY" on your Raptor Lake.
The "The branch counter is not available" message is expected.
Here is the 'perf evlist' result from my Lunar Lake machine,
# perf evlist -v
cpu_core/branch-instructions/pp: type: 4 (cpu_core), size: 136, config: 0xc4 (branch-instructions), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|READ|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID|GROUP|LOST, disabled: 1, freq: 1, enable_on_exec: 1, precise_ip: 2, sample_id_all: 1, exclude_guest: 1, branch_sample_type: ANY|COUNTERS
#
</quote>
Fixes:
|
||
|
Kan Liang
|
9953807c9e |
perf evlist: Print hint for group
An event group is a critical relationship. There is a -g option that can
display the relationship. But it's hard for a user to know when should
this option be applied.
If there is an event group in the perf record, print a hint to suggest
the user apply the -g to display the group information.
With the patch,
$ perf record -e "{cycles,instructions},instructions" sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.024 MB perf.data (4 samples) ]
$
$ perf evlist
cycles
instructions
instructions
# Tip: use 'perf evlist -g' to show group information
$ perf evlist -g
{cycles,instructions}
instructions
$
Committer testing:
So for a perf.data file _with_ a group:
root@number:~# perf evlist -g
{cpu_core/branch-instructions/pp,cpu_core/branches/}
dummy:u
root@number:~# perf evlist
cpu_core/branch-instructions/pp
cpu_core/branches/
dummy:u
# Tip: use 'perf evlist -g' to show group information
root@number:~#
Then for something _without_ a group, no hint:
root@number:~# perf record ls
<SNIP>
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.035 MB perf.data (7 samples) ]
root@number:~# perf evlist
cpu_atom/cycles/P
cpu_core/cycles/P
dummy:u
root@number:~#
No suggestion, good.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Closes: https://lore.kernel.org/lkml/ZttgvduaKsVn1r4p@x1/
Link: https://lore.kernel.org/r/20240908202847.176280-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Sam James
|
eb9b9a6f5a |
tools: Drop nonsensical -O6
-O6 is very much not-a-thing. Really, this should've been dropped
entirely in
|
||
|
Ian Rogers
|
89c0a55e55 |
perf pmu: To info add event_type_desc
All PMU events are assumed to be "Kernel PMU event", however, this isn't true for fake PMUs and won't be true with the addition of more software PMUs. Make the PMU's type description name configurable - largely for printing callbacks. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240907050830.6752-5-irogers@google.com Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: James Clark <james.clark@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
f08cc25843 |
perf evsel: Add accessor for tool_event
Currently tool events use a dedicated variable within the evsel. Later changes will move this to the unused struct perf_event_attr config for these events. Add an accessor to allow the later change to be well typed and avoid changing all uses. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240907050830.6752-4-irogers@google.com Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: James Clark <james.clark@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
925320737a |
perf pmus: Fake PMU clean up
Rather than passing a fake PMU around, just pass that the fake PMU should be used - true when doing testing. Move the fake PMU into pmus.[ch] and try to abstract the PMU's properties in pmu.c, ie so there is less "if fake_pmu" in non-PMU code. Give the fake PMU a made up type number. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20240907050830.6752-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
d3d5c1a00f |
perf list: Avoid potential out of bounds memory read
If a desc string is 0 length then -1 will be out of bounds, add a check. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20240907050830.6752-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Andrew Kreimer
|
4ae354d73a |
perf help: Fix a typo ("bellow")
Fix a typo in comments. Reported-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Link: https://lore.kernel.org/r/20240907131006.18510-1-algonell@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Changbin Du
|
74298dd8ac |
perf ftrace: Detect whether ftrace is enabled on system
To make error messages more accurate, this change detects whether ftrace is enabled on system by checking trace file "set_ftrace_pid". Before: # perf ftrace failed to reset ftrace # After: # perf ftrace ftrace is not supported on this system # Committer testing: Doing it in an unprivileged toolbox container on Fedora 40: Before: acme@number:~/git/perf-tools-next$ toolbox enter perf ⬢[acme@toolbox perf-tools-next]$ sudo su - ⬢[root@toolbox ~]# ~acme/bin/perf ftrace failed to reset ftrace ⬢[root@toolbox ~]# After this patch: ⬢[root@toolbox ~]# ~acme/bin/perf ftrace ftrace is not supported on this system ⬢[root@toolbox ~]# Maybe we could check if we are in such as situation, inside an unprivileged container, and provide a HINT line? Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Changbin Du <changbin.du@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240911100126.900779-1-changbin.du@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
83420d5f58 |
perf test shell probe_vfs_getname: Remove extraneous '=' from probe line number regex
Thomas reported the vfs_getname perf tests failing on s/390, it seems it was just to some extraneous '=' somehow getting into the regexp, remove it, now: root@x1:~# perf test getname 91: Add vfs_getname probe to get syscall args filenames : Ok 93: Use vfs_getname probe to get syscall args filenames : FAILED! 126: Check open filename arg using perf trace + vfs_getname : Ok root@x1:~# Second one remains a mistery, have to take some time to nail it down. Reported-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vasily Gorbik <gor@linux.ibm.com>, Link: https://lore.kernel.org/lkml/1d7f3b7b-9edc-4d90-955c-9345428563f1@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
9327f0ecad |
perf build: Require at least clang 16.0.6 to build BPF skeletons
Howard reported problems using perf features that use BPF:
perf $ clang -v
Debian clang version 15.0.6
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /bin
Found candidate GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Selected GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Candidate multilib: .;@m64
Selected multilib: .;@m64
perf $ ./perf trace -e write --max-events=1
libbpf: prog 'sys_enter_rename': BPF program load failed: Permission denied
libbpf: prog 'sys_enter_rename': -- BEGIN PROG LOAD LOG --
0: R1=ctx() R10=fp0
But it works with:
perf $ clang -v
Debian clang version 16.0.6 (15~deb12u1)
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /bin
Found candidate GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Selected GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Candidate multilib: .;@m64
Selected multilib: .;@m64
perf $ ./perf trace -e write --max-events=1
0.000 ( 0.009 ms): gmain/1448 write(fd: 4, buf: \1\0\0\0\0\0\0\0, count: 8) = 8 (kworker/0:0-eve)
perf $
So lets make that the required version, if you happen to have a slightly
older version where this work, please report so that we can adjust the
minimum required version.
Reported-by: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZuGL9ROeTV2uXoSp@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
4c1af9bf97 |
perf trace: If a syscall arg is marked as 'const', assume it is coming _from_ userspace
We need to decide where to copy syscall arg contents, if at the
syscalls:sys_entry hook, meaning is something that is coming from
user to kernel space, or if it is a response, i.e. if it is something
the _kernel_ is filling in and thus going to userspace.
Since we have 'const' used in those syscalls, and unsure about this
being consistent, doing:
root@number:~# echo $(grep const /sys/kernel/tracing/events/syscalls/sys_enter_*/format | grep struct | cut -c47- | cut -d'/' -f1)
clock_nanosleep clock_settime epoll_pwait2 futex io_pgetevents landlock_create_ruleset listmount mq_getsetattr mq_notify mq_timedreceive mq_timedsend preadv2 preadv prlimit64 process_madvise process_vm_readv process_vm_readv process_vm_writev process_vm_writev pwritev2 pwritev readv rt_sigaction rt_sigtimedwait semtimedop statmount timerfd_settime timer_settime vmsplice writev
root@number:~#
Seems to indicate that we can use that for the ones that have the
'const' to mark it as coming from user space, do it.
Most notable/frequent syscall that now gets BTF pretty printed in a
system wide 'perf trace' session is:
root@number:~# perf trace
21.160 ( ): MediaSu~isor #/1028597 futex(uaddr: 0x7f49e1dfe964, op: WAIT_BITSET|PRIVATE_FLAG, utime: (struct __kernel_timespec){.tv_sec = (__kernel_time64_t)50290,.tv_nsec = (long long int)810362837,}, val3: MATCH_ANY) ...
21.166 ( 0.000 ms): RemVidChild/6995 futex(uaddr: 0x7f49fcc7fa00, op: WAKE|PRIVATE_FLAG, val: 1) = 0
21.169 ( 0.001 ms): RemVidChild/6995 sendmsg(fd: 25<socket:[78915]>, msg: 0x7f49e9af9da0, flags: DONTWAIT) = 280
21.172 ( 0.289 ms): RemVidChild/6995 futex(uaddr: 0x7f49fcc7fa58, op: WAIT_BITSET|PRIVATE_FLAG|CLOCK_REALTIME, val3: MATCH_ANY) = 0
21.463 ( 0.000 ms): RemVidChild/6995 futex(uaddr: 0x7f49fcc7fa00, op: WAKE|PRIVATE_FLAG, val: 1) = 0
21.467 ( 0.001 ms): RemVidChild/6995 futex(uaddr: 0x7f49e28bb964, op: WAKE|PRIVATE_FLAG, val: 1) = 1
21.160 ( 0.314 ms): MediaSu~isor #/1028597 ... [continued]: futex()) = 0
21.469 ( ): RemVidChild/6995 futex(uaddr: 0x7f49fcc7fa5c, op: WAIT_BITSET|PRIVATE_FLAG|CLOCK_REALTIME, val3: MATCH_ANY) ...
21.475 ( 0.000 ms): MediaSu~isor #/1028597 futex(uaddr: 0x7f49d0223040, op: WAKE|PRIVATE_FLAG, val: 1) = 0
21.478 ( 0.001 ms): MediaSu~isor #/1028597 futex(uaddr: 0x7f49e26ac964, op: WAKE|PRIVATE_FLAG, val: 1) = 1
^Croot@number:~#
root@number:~# cat /sys/kernel/tracing/events/syscalls/sys_enter_futex/format
name: sys_enter_futex
ID: 454
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int __syscall_nr; offset:8; size:4; signed:1;
field:u32 * uaddr; offset:16; size:8; signed:0;
field:int op; offset:24; size:8; signed:0;
field:u32 val; offset:32; size:8; signed:0;
field:const struct __kernel_timespec * utime; offset:40; size:8; signed:0;
field:u32 * uaddr2; offset:48; size:8; signed:0;
field:u32 val3; offset:56; size:8; signed:0;
print fmt: "uaddr: 0x%08lx, op: 0x%08lx, val: 0x%08lx, utime: 0x%08lx, uaddr2: 0x%08lx, val3: 0x%08lx", ((unsigned long)(REC->uaddr)), ((unsigned long)(REC->op)), ((unsigned long)(REC->val)), ((unsigned long)(REC->utime)), ((unsigned long)(REC->uaddr2)), ((unsigned long)(REC->val3))
root@number:~#
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fWnuQrrBoTn6Rrn6vM_xQ2fCoc9i-AitD7abTcNi-4o1Q@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Yang Li
|
e37b315c17 |
perf parse-events: Remove duplicated include in parse-events.c
The header files parse-events.h is included twice in parse-events.c, so one inclusion of each can be removed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10822 Link: https://lore.kernel.org/r/20240910005522.35994-1-yang.lee@linux.alibaba.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
02b2705017 |
perf callchain: Allow symbols to be optional when resolving a callchain
In uses like 'perf inject' it is not necessary to gather the symbol for each call chain location, the map for the sample IP is wanted so that build IDs and the like can be injected. Make gathering the symbol in the callchain_cursor optional. For a 'perf inject -B' command this lowers the peak RSS from 54.1MB to 29.6MB by avoiding loading symbols. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anne Macedo <retpolanne@posteo.net> Cc: Casey Chen <cachen@purestorage.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Link: https://lore.kernel.org/r/20240909203740.143492-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
64eed019f3 |
perf inject: Lazy build-id mmap2 event insertion
Add -B option that lazily inserts mmap2 events thereby dropping all
mmap events without samples. This is similar to the behavior of -b
where only build_id events are inserted when a dso is accessed in a
sample.
File size savings can be significant in system-wide mode, consider:
$ perf record -g -a -o perf.data sleep 1
$ perf inject -B -i perf.data -o perf.new.data
$ ls -al perf.data perf.new.data
5147049 perf.data
2248493 perf.new.data
Give test coverage of the new option in pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
d762ba020d |
perf inject: Add new mmap2-buildid-all option
Add an option that allows all mmap or mmap2 events to be rewritten as mmap2 events with build IDs. This is similar to the existing -b/--build-ids and --buildid-all options except instead of adding a build_id event an existing mmap/mmap2 event is used as a template and a new mmap2 event synthesized from it. As mmap2 events are typical this avoids the insertion of build_id events. Add test coverage to the pipe test. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anne Macedo <retpolanne@posteo.net> Cc: Casey Chen <cachen@purestorage.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Link: https://lore.kernel.org/r/20240909203740.143492-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
ae39ba1655 |
perf inject: Fix build ID injection
Build ID injection wasn't inserting a sample ID and aligning events to 64 bytes rather than 8. No sample ID means events are unordered and two different build_id events for the same path, as happens when a file is replaced, can't be differentiated. Add in sample ID insertion for the build_id events alongside some refactoring. The refactoring better aligns the function arguments for different use cases, such as synthesizing build_id events without needing to have a dso. The misc bits are explicitly passed as with callchains the maps/dsos may span user and kernel land, so using sample->cpumode isn't good enough. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anne Macedo <retpolanne@posteo.net> Cc: Casey Chen <cachen@purestorage.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Link: https://lore.kernel.org/r/20240909203740.143492-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
02648783c2 |
perf annotate-data: Add pr_debug_scope()
The pr_debug_scope() is to print more information about the scope DIE during the instruction tracking so that it can help finding relevant debug info and the source code like inlined functions more easily. $ perf --debug type-profile annotate --data-type ... ----------------------------------------------------------- find data type for 0(reg0, reg12) at set_task_cpu+0xdd CU for kernel/sched/core.c (die:0x1268dae) frame base: cfa=1 fbreg=7 scope: [3/3] (die:12b6d28) [inlined] set_task_rq <<<--- (here) bb: [9f - dd] var [9f] reg3 type='struct task_struct*' size=0x8 (die:0x126aff0) var [9f] reg6 type='unsigned int' size=0x4 (die:0x1268e0d) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240909214251.3033827-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
c8b9358778 |
perf annotate: Treat 'call' instruction as stack operation
I found some portion of mem-store events sampled on CALL instruction which has no memory access. But it actually saves a return address into stack. It should be considered as a stack operation like RET instruction. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240909214251.3033827-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
206dcfca1f |
perf build: Autodetect minimum required llvm-dev version
The new LLVM addr2line feature requires a minimum version of 13 to
compile. Add a feature check for the version so that NO_LLVM=1 doesn't
need to be explicitly added. Leave the existing llvm feature check
intact because it's used by tools other than Perf.
This fixes the following compilation error when the llvm-dev version
doesn't match:
util/llvm-c-helpers.cpp: In function 'char* llvm_name_for_code(dso*, const char*, u64)':
util/llvm-c-helpers.cpp:178:21: error: 'std::remove_reference_t<llvm::DILineInfo>' {aka 'struct llvm::DILineInfo'} has no member named 'StartAddress'
178 | addr, res_or_err->StartAddress ? *res_or_err->StartAddress : 0);
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
375f9262ac |
perf trace: Mark the rlim arg in the prlimit64 and setrlimit syscalls as coming from user space
With that it uses the generic BTF based pretty printer:
root@number:~# perf trace -e prlimit64
0.000 ( 0.004 ms): :3417020/3417020 prlimit64(resource: NOFILE, old_rlim: 0x7fb8842fe3b0) = 0
0.126 ( 0.003 ms): Chroot Helper/3417022 prlimit64(resource: NOFILE, old_rlim: 0x7fb8842fdfd0) = 0
12.557 ( 0.005 ms): firefox/3417020 prlimit64(resource: STACK, old_rlim: 0x7ffe9ade1b80) = 0
26.640 ( 0.006 ms): MainThread/3417020 prlimit64(resource: STACK, old_rlim: 0x7ffe9ade1780) = 0
27.553 ( 0.002 ms): Web Content/3417020 prlimit64(resource: AS, old_rlim: 0x7ffe9ade1660) = 0
29.405 ( 0.003 ms): Web Content/3417020 prlimit64(resource: NOFILE, old_rlim: 0x7ffe9ade0c80) = 0
30.471 ( 0.002 ms): Web Content/3417020 prlimit64(resource: RTTIME, old_rlim: 0x7ffe9ade1370) = 0
30.485 ( 0.001 ms): Web Content/3417020 prlimit64(resource: RTTIME, new_rlim: (struct rlimit64){.rlim_cur = (__u64)50000,.rlim_max = (__u64)200000,}) = 0
31.779 ( 0.001 ms): Web Content/3417020 prlimit64(resource: STACK, old_rlim: 0x7ffe9ade1670) = 0
^Croot@number:~#
Better than before, still needs improvements in the configurability of
the libbpf BTF dumper to get it to the strace output standard.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZuBQI-f8CGpuhIdH@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
f3f16112c6 |
perf trace: Support collecting 'union's with the BPF augmenter
And reuse the BTF based struct pretty printer, with that we can offer
initial support for the 'bpf' syscall's second argument, a 'union
bpf_attr' pointer.
But this is not that satisfactory as the libbpf btf dumper will pretty
print _all_ the union, we need to have a way to say that the first arg
selects the type for the union member to be pretty printed, something
like what pahole does translating the PERF_RECORD_ selector into a name,
and using that name to find a matching struct.
In the case of 'union bpf_attr' it would map PROG_LOAD to one of the
union members, but unfortunately there is no such mapping:
root@number:~# pahole bpf_attr
union bpf_attr {
struct {
__u32 map_type; /* 0 4 */
__u32 key_size; /* 4 4 */
__u32 value_size; /* 8 4 */
__u32 max_entries; /* 12 4 */
__u32 map_flags; /* 16 4 */
__u32 inner_map_fd; /* 20 4 */
__u32 numa_node; /* 24 4 */
char map_name[16]; /* 28 16 */
__u32 map_ifindex; /* 44 4 */
__u32 btf_fd; /* 48 4 */
__u32 btf_key_type_id; /* 52 4 */
__u32 btf_value_type_id; /* 56 4 */
__u32 btf_vmlinux_value_type_id; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
__u64 map_extra; /* 64 8 */
__s32 value_type_btf_obj_fd; /* 72 4 */
__s32 map_token_fd; /* 76 4 */
}; /* 0 80 */
struct {
__u32 map_fd; /* 0 4 */
/* XXX 4 bytes hole, try to pack */
__u64 key; /* 8 8 */
union {
__u64 value; /* 16 8 */
__u64 next_key; /* 16 8 */
}; /* 16 8 */
__u64 flags; /* 24 8 */
}; /* 0 32 */
struct {
__u64 in_batch; /* 0 8 */
__u64 out_batch; /* 8 8 */
__u64 keys; /* 16 8 */
__u64 values; /* 24 8 */
__u32 count; /* 32 4 */
__u32 map_fd; /* 36 4 */
__u64 elem_flags; /* 40 8 */
__u64 flags; /* 48 8 */
} batch; /* 0 56 */
struct {
__u32 prog_type; /* 0 4 */
__u32 insn_cnt; /* 4 4 */
__u64 insns; /* 8 8 */
__u64 license; /* 16 8 */
__u32 log_level; /* 24 4 */
__u32 log_size; /* 28 4 */
__u64 log_buf; /* 32 8 */
__u32 kern_version; /* 40 4 */
__u32 prog_flags; /* 44 4 */
char prog_name[16]; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
__u32 prog_ifindex; /* 64 4 */
__u32 expected_attach_type; /* 68 4 */
__u32 prog_btf_fd; /* 72 4 */
__u32 func_info_rec_size; /* 76 4 */
__u64 func_info; /* 80 8 */
__u32 func_info_cnt; /* 88 4 */
__u32 line_info_rec_size; /* 92 4 */
__u64 line_info; /* 96 8 */
__u32 line_info_cnt; /* 104 4 */
__u32 attach_btf_id; /* 108 4 */
union {
__u32 attach_prog_fd; /* 112 4 */
__u32 attach_btf_obj_fd; /* 112 4 */
}; /* 112 4 */
__u32 core_relo_cnt; /* 116 4 */
__u64 fd_array; /* 120 8 */
/* --- cacheline 2 boundary (128 bytes) --- */
__u64 core_relos; /* 128 8 */
__u32 core_relo_rec_size; /* 136 4 */
__u32 log_true_size; /* 140 4 */
__s32 prog_token_fd; /* 144 4 */
}; /* 0 152 */
struct {
__u64 pathname; /* 0 8 */
__u32 bpf_fd; /* 8 4 */
__u32 file_flags; /* 12 4 */
__s32 path_fd; /* 16 4 */
}; /* 0 24 */
struct {
union {
__u32 target_fd; /* 0 4 */
__u32 target_ifindex; /* 0 4 */
}; /* 0 4 */
__u32 attach_bpf_fd; /* 4 4 */
__u32 attach_type; /* 8 4 */
__u32 attach_flags; /* 12 4 */
__u32 replace_bpf_fd; /* 16 4 */
union {
__u32 relative_fd; /* 20 4 */
__u32 relative_id; /* 20 4 */
}; /* 20 4 */
__u64 expected_revision; /* 24 8 */
}; /* 0 32 */
struct {
__u32 prog_fd; /* 0 4 */
__u32 retval; /* 4 4 */
__u32 data_size_in; /* 8 4 */
__u32 data_size_out; /* 12 4 */
__u64 data_in; /* 16 8 */
__u64 data_out; /* 24 8 */
__u32 repeat; /* 32 4 */
__u32 duration; /* 36 4 */
__u32 ctx_size_in; /* 40 4 */
__u32 ctx_size_out; /* 44 4 */
__u64 ctx_in; /* 48 8 */
__u64 ctx_out; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
__u32 flags; /* 64 4 */
__u32 cpu; /* 68 4 */
__u32 batch_size; /* 72 4 */
} test; /* 0 80 */
struct {
union {
__u32 start_id; /* 0 4 */
__u32 prog_id; /* 0 4 */
__u32 map_id; /* 0 4 */
__u32 btf_id; /* 0 4 */
__u32 link_id; /* 0 4 */
}; /* 0 4 */
__u32 next_id; /* 4 4 */
__u32 open_flags; /* 8 4 */
}; /* 0 12 */
struct {
__u32 bpf_fd; /* 0 4 */
__u32 info_len; /* 4 4 */
__u64 info; /* 8 8 */
} info; /* 0 16 */
struct {
union {
__u32 target_fd; /* 0 4 */
__u32 target_ifindex; /* 0 4 */
}; /* 0 4 */
__u32 attach_type; /* 4 4 */
__u32 query_flags; /* 8 4 */
__u32 attach_flags; /* 12 4 */
__u64 prog_ids; /* 16 8 */
union {
__u32 prog_cnt; /* 24 4 */
__u32 count; /* 24 4 */
}; /* 24 4 */
/* XXX 4 bytes hole, try to pack */
__u64 prog_attach_flags; /* 32 8 */
__u64 link_ids; /* 40 8 */
__u64 link_attach_flags; /* 48 8 */
__u64 revision; /* 56 8 */
} query; /* 0 64 */
struct {
__u64 name; /* 0 8 */
__u32 prog_fd; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 cookie; /* 16 8 */
} raw_tracepoint; /* 0 24 */
struct {
__u64 btf; /* 0 8 */
__u64 btf_log_buf; /* 8 8 */
__u32 btf_size; /* 16 4 */
__u32 btf_log_size; /* 20 4 */
__u32 btf_log_level; /* 24 4 */
__u32 btf_log_true_size; /* 28 4 */
__u32 btf_flags; /* 32 4 */
__s32 btf_token_fd; /* 36 4 */
}; /* 0 40 */
struct {
__u32 pid; /* 0 4 */
__u32 fd; /* 4 4 */
__u32 flags; /* 8 4 */
__u32 buf_len; /* 12 4 */
__u64 buf; /* 16 8 */
__u32 prog_id; /* 24 4 */
__u32 fd_type; /* 28 4 */
__u64 probe_offset; /* 32 8 */
__u64 probe_addr; /* 40 8 */
} task_fd_query; /* 0 48 */
struct {
union {
__u32 prog_fd; /* 0 4 */
__u32 map_fd; /* 0 4 */
}; /* 0 4 */
union {
__u32 target_fd; /* 4 4 */
__u32 target_ifindex; /* 4 4 */
}; /* 4 4 */
__u32 attach_type; /* 8 4 */
__u32 flags; /* 12 4 */
union {
__u32 target_btf_id; /* 16 4 */
struct {
__u64 iter_info; /* 16 8 */
__u32 iter_info_len; /* 24 4 */
}; /* 16 16 */
struct {
__u64 bpf_cookie; /* 16 8 */
} perf_event; /* 16 8 */
struct {
__u32 flags; /* 16 4 */
__u32 cnt; /* 20 4 */
__u64 syms; /* 24 8 */
__u64 addrs; /* 32 8 */
__u64 cookies; /* 40 8 */
} kprobe_multi; /* 16 32 */
struct {
__u32 target_btf_id; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
__u64 cookie; /* 24 8 */
} tracing; /* 16 16 */
struct {
__u32 pf; /* 16 4 */
__u32 hooknum; /* 20 4 */
__s32 priority; /* 24 4 */
__u32 flags; /* 28 4 */
} netfilter; /* 16 16 */
struct {
union {
__u32 relative_fd; /* 16 4 */
__u32 relative_id; /* 16 4 */
}; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
__u64 expected_revision; /* 24 8 */
} tcx; /* 16 16 */
struct {
__u64 path; /* 16 8 */
__u64 offsets; /* 24 8 */
__u64 ref_ctr_offsets; /* 32 8 */
__u64 cookies; /* 40 8 */
__u32 cnt; /* 48 4 */
__u32 flags; /* 52 4 */
__u32 pid; /* 56 4 */
} uprobe_multi; /* 16 48 */
struct {
union {
__u32 relative_fd; /* 16 4 */
__u32 relative_id; /* 16 4 */
}; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
__u64 expected_revision; /* 24 8 */
} netkit; /* 16 16 */
}; /* 16 48 */
} link_create; /* 0 64 */
struct {
__u32 link_fd; /* 0 4 */
union {
__u32 new_prog_fd; /* 4 4 */
__u32 new_map_fd; /* 4 4 */
}; /* 4 4 */
__u32 flags; /* 8 4 */
union {
__u32 old_prog_fd; /* 12 4 */
__u32 old_map_fd; /* 12 4 */
}; /* 12 4 */
} link_update; /* 0 16 */
struct {
__u32 link_fd; /* 0 4 */
} link_detach; /* 0 4 */
struct {
__u32 type; /* 0 4 */
} enable_stats; /* 0 4 */
struct {
__u32 link_fd; /* 0 4 */
__u32 flags; /* 4 4 */
} iter_create; /* 0 8 */
struct {
__u32 prog_fd; /* 0 4 */
__u32 map_fd; /* 4 4 */
__u32 flags; /* 8 4 */
} prog_bind_map; /* 0 12 */
struct {
__u32 flags; /* 0 4 */
__u32 bpffs_fd; /* 4 4 */
} token_create; /* 0 8 */
};
root@number:~#
So this is one case where BTF gets us only that far, not getting all
the way to automate the pretty printing of unions designed like 'union
bpf_attr', we will need a custom pretty printer for this union, as using
the libbpf union BTF dumper is way too verbose:
root@number:~# perf trace --max-events 1 -e bpf bpftool map
0.000 ( 0.054 ms): bpftool/3409073 bpf(cmd: PROG_LOAD, uattr: (union bpf_attr){(struct){.map_type = (__u32)1,.key_size = (__u32)2,.value_size = (__u32)2755142048,.max_entries = (__u32)32764,.map_flags = (__u32)150263906,.inner_map_fd = (__u32)21920,},(struct){.map_fd = (__u32)1,.key = (__u64)140723063628192,(union){.value = (__u64)94145833392226,.next_key = (__u64)94145833392226,},},.batch = (struct){.in_batch = (__u64)8589934593,.out_batch = (__u64)140723063628192,.keys = (__u64)94145833392226,},(struct){.prog_type = (__u32)1,.insn_cnt = (__u32)2,.insns = (__u64)140723063628192,.license = (__u64)94145833392226,},(struct){.pathname = (__u64)8589934593,.bpf_fd = (__u32)2755142048,.file_flags = (__u32)32764,.path_fd = (__s32)150263906,},(struct){(union){.target_fd = (__u32)1,.target_ifindex = (__u32)1,},.attach_bpf_fd = (__u32)2,.attach_type = (__u32)2755142048,.attach_flags = (__u32)32764,.replace_bpf_fd = (__u32)150263906,(union){.relative_fd = (__u32)21920,.relative_id = (__u32)21920,},},.test = (struct){.prog_fd = (__u32)1,.retval = (__u32)2,.data_size_in = (__u32)2755142048,.data_size_out = (__u32)32764,.data_in = (__u64)94145833392226,},(struct){(union){.start_id = (__u32)1,.prog_id = (__u32)1,.map_id = (__u32)1,.btf_id = (__u32)1,.link_id = (__u32)1,},.next_id = (__u32)2,.open_flags = (__u32)2755142048,},.info = (struct){.bpf_fd = (__u32)1,.info_len = (__u32)2,.info = (__u64)140723063628192,},.query = (struct){(union){.target_fd = (__u32)1,.target_ifindex = (__u32)1,},.attach_type = (__u32)2,.query_flags = (__u32)2755142048,.attach_flags = (__u32)32764,.prog_ids = (__u64)94145833392226,},.raw_tracepoint = (struct){.name = (__u64)8589934593,.prog_fd = (__u32)2755142048,.cookie = (__u64)94145833392226,},(struct){.btf = (__u64)8589934593,.btf_log_buf = (__u64)140723063628192,.btf_size = (__u32)150263906,.btf_log_size = (__u32)21920,},.task_fd_query = (struct){.pid = (__u32)1,.fd = (__u32)2,.flags = (__u32)2755142048,.buf_len = (__u32)32764,.buf = (__u64)94145833392226,},.link_create = (struct){(union){.prog_fd = (__u32)1,.map_fd = (__u32)1,},(u) = 3
root@number:~# 2: prog_array name hid_jmp_table flags 0x0
key 4B value 4B max_entries 1024 memlock 8440B
owner_prog_type tracing owner jited
13: hash_of_maps name cgroup_hash flags 0x0
key 8B value 4B max_entries 2048 memlock 167584B
pids systemd(1)
960: array name libbpf_global flags 0x0
key 4B value 32B max_entries 1 memlock 280B
961: array name pid_iter.rodata flags 0x480
key 4B value 4B max_entries 1 memlock 8192B
btf_id 1846 frozen
pids bpftool(3409073)
962: array name libbpf_det_bind flags 0x0
key 4B value 32B max_entries 1 memlock 280B
root@number:~#
For simpler unions this may be better than not seeing any payload, so
keep it there.
Acked-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZuBLat8cbadILNLA@x1
[ Removed needless parenteses in the if block leading to the trace__btf_scnprintf() call, as per Howard's review comments ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Howard Chu
|
3278024540 |
perf trace: Add --force-btf for debugging
If --force-btf is enabled, prefer btf_dump general pretty printer to
perf trace's customized pretty printers.
Mostly for debug purposes.
Committer testing:
diff before/after shows we need several improvements to be able to
compare the changes, first we need to cut off/disable mutable data such
as pids and timestamps, then what is left are the buffer addresses
passed from userspace, returned from kernel space, maybe we can ask
'perf trace' to go on making those reproducible.
That would entail a Pointer Address Translation (PAT) like for
networking, that would, for simple, reproducible if not for these
details, workloads, that we would then use in our regression tests.
Enough digression, this is one such diff:
openat(dfd: CWD, filename: "/usr/share/locale/locale.alias", flags: RDONLY|CLOEXEC) = 3
-fstat(fd: 3, statbuf: 0x7fff01f212a0) = 0
-read(fd: 3, buf: 0x5596bab2d630, count: 4096) = 2998
-read(fd: 3, buf: 0x5596bab2d630, count: 4096) = 0
+fstat(fd: 3, statbuf: 0x7ffc163cf0e0) = 0
+read(fd: 3, buf: 0x55b4e0631630, count: 4096) = 2998
+read(fd: 3, buf: 0x55b4e0631630, count: 4096) = 0
close(fd: 3) = 0
openat(dfd: CWD, filename: "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo") = -1 ENOENT (No such file or directory)
openat(dfd: CWD, filename: "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo") = -1 ENOENT (No such file or directory)
@@ -45,7 +45,7 @@
openat(dfd: CWD, filename: "/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo") = -1 ENOENT (No such file or directory)
openat(dfd: CWD, filename: "/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo") = -1 ENOENT (No such file or directory)
openat(dfd: CWD, filename: "/usr/share/locale/en/LC_MESSAGES/coreutils.mo") = -1 ENOENT (No such file or directory)
-{ .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7fff01f21990) = 0
+(struct __kernel_timespec){.tv_sec = (__kernel_time64_t)1,}, rmtp: 0x7ffc163cf7d0) =
The problem more close to our hands is to make the libbpf BTF pretty
printer to have a mode that closely resembles what we're trying to
resemble: strace output.
Being able to run something with 'perf trace' and with 'strace' and get
the exact same output should be of interest of anybody wanting to have
strace and 'perf trace' regression tested against each other.
That last part is 'perf trace' shot at being something so useful as
strace... ;-)
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240824163322.60796-8-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Howard Chu
|
a68fd6a6cd |
perf trace: Collect augmented data using BPF
Include trace_augment.h for TRACE_AUG_MAX_BUF, so that BPF reads TRACE_AUG_MAX_BUF bytes of buffer maximum. Determine what type of argument and how many bytes to read from user space, us ing the value in the beauty_map. This is the relation of parameter type and its corres ponding value in the beauty map, and how many bytes we read eventually: string: 1 -> size of string (till null) struct: size of struct -> size of struct buffer: -1 * (index of paired len) -> value of paired len (maximum: TRACE_AUG_ MAX_BUF) After reading from user space, we output the augmented data using bpf_perf_event_output(). If the struct augmenter, augment_sys_enter() failed, we fall back to using bpf_tail_call(). I have to make the payload 6 times the size of augmented_arg, to pass the BPF verifier. Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240815013626.935097-10-howardchu95@gmail.com Link: https://lore.kernel.org/r/20240824163322.60796-7-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |