On the HiHope boards, we have a single port with a single endpoint defined
as below:
....
rsnd_port: port {
rsnd_endpoint: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint>;
frame-master = <&rsnd_endpoint>;
playback = <&ssi2>;
};
};
....
With commit 547b02f74e ("ASoC: rsnd: enable multi Component support for
Audio Graph Card/Card2"), support for multiple ports was added. This caused
probe failures on HiHope boards, as the endpoint could not be retrieved due
to incorrect device node pointers being used.
This patch fixes the issue by updating the `rsnd_dai_of_node()` and
`rsnd_dai_probe()` functions to use the correct device node pointers based
on the port names ('port' or 'ports'). It ensures that the endpoint is
properly parsed for both single and multi-port configurations, restoring
compatibility with HiHope boards.
Fixes: 547b02f74e ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241010141432.716868-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd is implementing own DMAEngine code, but we can replace it with
pcm_dmaengine code, because these are almost same.
Let's use existing and stable code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cymvk3t5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_mod_confirm_ssi() confirms mod sanity, it should always be
confirmed, not only when DEBUG. This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ed7bk4qt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The static arrays passed as 'auto_selectable_formats' are not modified
by the drivers nor by the core code, so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://msgid.link/r/20240617125735.582963-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-24-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
R-Car Gen1 and Gen4 doesn't have SCU, and current driver checks Gen1
(only) on each devices (A). But these drivers are assuming it might be
not enabled after that (B).
/* This driver doesn't support Gen1 at this point */
(A) if (rsnd_is_gen1(priv))
return 0;
(B) node = rsnd_src_of_node(priv);
if (!node)
return 0; /* not used is not error */
Gen4 DT doesn't have these device settings. (A) check doesn't work for
it, but (B) check handling it.
Gen1 DT doesn't have these device settings either, and (A) is handling
it, but (B) only is very enough. (A) is no longer needed.
This patch removes (A)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87v850a4dl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC today.
In general, driver uses flag to handling SoC difference. But in Renesas
Sound case, the differences are very specific, if you try to make it
general, the code will become be very complicated.
Some of them can use flag to handling, but we can find-out all diffence
by using "grep rsnd_is_gen" today. It is not so good, but not so bad so
far. So we will keep current style for a while.
This patch cares Gen1/Gen2 exception by using negative handling to makes no
more update for this part when we support Gen5 or later.
- if (rsnd_is_gen3() || rsnd_is_gen4() || rsnd_is_gen5() || ...)
+ if (!rsnd_is_gen1() && !rsnd_is_gen2())
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87wmpga4ds.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC except rsnd_is_e3(). Let's put same rule for E3 as well.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87y19wa4dy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All SoC has reg-name, no need to support getting resource from ID
any more. Remove it. To get physical address for DMA settings,
it still need to know the index, but it is no longer fixed.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87zfuca4e6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
R-Car Sound is using almost same register mapping on each generation,
therefore we can share it. Here indicates some memo/comments.
SSI/SSIU/SCU have multi channels (SSI0 - SSI9 etc), but ADG is single,
so, we don't need to have multi channel settings for it
- rsnd_gen_regmap_init(..., 10, ..ADG, ...);
+ rsnd_gen_regmap_init(..., 1, ..ADG, ...);
Gen4 added new SSI_BUSIF, but it is not used
Gen4 calls rsnd_gen_regmap_init() for SDMC, but the address is calculated
by rsnd_gen4_dma_addr(). It needs physical address, but other info are
not needed. use NULL conf for it.
- rsnd_gen_regmap_init(..., 10, ..SDMC, conf_sdmc);
+ rsnd_gen_regmap_init(..., 1, ..SDMC, conf_null);
Gen4 have only SSI0/SSIU0, we don't need to have multi channel settings.
- rsnd_gen_regmap_init(..., 10, ..SSI, ...);
+ rsnd_gen_regmap_init(..., 1, ..SSI, ...);
SSI_MODE2 address is different between Gen2/3 and Gen4, but it is not
used on Gen4. Thus we can share same regmap table.
Gen2/3 : 0x808
Gen4 : 0xa0c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://msgid.link/r/871q7obiyt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Timing select registers for SRC and CMD are by default
referring to the corresponding SSI word select.
The calculation rule from HW spec skips SSI8, which has
no clock connection.
>From section 43.2.18 CMD Output Timing Select Register (CMDOUT_TIMSEL),
of R-Car Series, 3rd Generation Hardware User’s Manual Rev.2.20:
CMD0_OUT_DIVCLK_ Output Timing
SEL [4:0] Signal Select
B'0 0110: ssi_ws0
B'0 0111: ssi_ws1
B'0 1000: ssi_ws2
B'0 1001: ssi_ws3
B'0 1010: ssi_ws4
B'0 1011: ssi_ws5
B'0 1100: ssi_ws6
B'0 1101: ssi_ws7
<GAP>
B'0 1110: ssi_ws9
B'0 1111: Setting prohibited
Fix the erroneous prohibited setting of timsel value 1111 (0xf) for SSI9
by using timsel value 1110 (0xe) instead. This is possible because SSI8
is not connected as shown by <GAP> in the table above.
[21.695055] rcar_sound ec500000.sound: b adg[0]-CMDOUT_TIMSEL (32):00000f00/00000f1f
Correct the timsel assignment.
Fixes: 629509c5bc ("ASoC: rsnd: add Gen2 SRC and DMAEngine support")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andreas Pape <Andreas.Pape4@bosch.com>
Signed-off-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
Tested-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
[erosca: massage commit description]
Signed-off-by: Eugeniu Rosca <eugeniu.rosca@bosch.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240301085003.3057-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cyyos25y.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The loop is not using "node", of_node_put(node) is not needed.
Cc: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8734zlilmd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230907095521.14053-11-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Current adg.c will configure BRGCKR/BRRA/BRRB to output clock
when it start sound. OTAH, rsnd_adg_clk_enable() will enables
clk_a/b/c when driver was probed.
But it is strange, these should be set in the same time.
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6oqzlei.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current adg has default division for BRRA/BRRB, but it was created at
very beginning of the driver implementation, and is now an unnecessary
settings.
Because it has this default division, unexpected clockout might
be selected. For example if it requests only 44.1kHz base clockout,
unrequested 48kHz base clockout also will be selected.
This patch remove default division of clock out
Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87il96zlep.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current adg.c doesn't assume that requested clock out divide condition
doesn't match. In such case, it will indicate strange message, and will
register NULL clock, etc. It is just a DT setting miss, but is
confusable. This patch check all conditions for it.
Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lee2zlf7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Basically Renesas sound ADG is assuming that it has accurately
divisible input clock. But sometimes / some board might not have it.
The clk_i from CPG is used for such case. It can't calculate accurate
division, but can be used as approximate rate.
This patch enable clk_i for such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Adnan Ali <adnan.ali@bp.renesas.com>
Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de>
Tested-by: Patrick Keil <patrick.keil@conti-engineering.com>
Link: https://lore.kernel.org/r/87msyizlfd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to call of_node_put() when break from
for_each_child_of_node(). This patch add missing
of_node_put().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkfh9g68.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It calls rsnd_dai_of_node() to know it was called from Audio Graph
Card/Card2, or from Simple Audio Card. And after that, it gets
number of related DAIs.
To be more simple code, this patch merges these.
This is prepare for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8eab1md.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd is using DAI ID to get own priv data without setting
driver->id. It was no problem for Single Component, but will be problem
in case of Multi Component, because it is not a DAI serial number.
struct snd_soc_dai *snd_soc_register_dai(...)
{
...
if (dai_drv->id)
dai->id = dai_drv->id;
else
dai->id = component->num_dai;
...
}
This patch sets driver->id, and get serial number.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wmyqb1mm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-133-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546413-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd silently uses default TDM width if it was strange
settings. It is difficult to notice about it.
This patch indicates warning for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lel6ksqn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch is tested on V4H White Hawk + ARD-AUDIO-DA7212
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7qe5ej5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch tidyups rsnd_dma_probe(), but there is no effect.
This is prepare for Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0va5elq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ADG need to know output rate of 44.1kHz/48kHz.
It is using single variable for each, but this patch changes
it to array. Nothing is changed by this patch.
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tu065em3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current adg.c is assuming number of clkin/clkout are fixed, but it is
not correct on Gen4. This patch uses clkin/out_size to handling it.
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8km5em7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves clkout_name to top of the file to handling both
clkin/clkout in the same place.
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn525emc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current adg.c is usig "clk" as clock IN, but is using "clkout" for
clock OUT. This patch arranges "clk" to "clkin".
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1pi5emh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The flag LRCLK_ASYNC / AUDIO_OUT_48 had been added to handling
special case of Salvator-X board, but it is not used on upstream.
It makes code complex today, let's remove these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg9y5emm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some SoC can't handle all requested hw rule. In such case, it will indicate
like below, but it is unclear why it didn't work to user.
This patch indicates warning in such case once, because player will try to
similar rule many times.
# aplay sound.wav
Playing WAVE 'sound.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
aplay: aplay.c: 1359: set_params: Assertion `err >= 0' failed.
Aborted by signal Aborted...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87357q6t7b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_ssi_master_clk_start() indicates error message if it couldn't
handle requested clock/rate, but it is not caring all cases.
This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874js66t7g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b43b8ae87c ("ASoC: rsnd: protect mod->status") removed
RSND_DEBUG_NO_DAI_CALL and rsnd_dbg_dai_call(), but these are still
exist on rsnd.h. This patch removes it.
Fixes: b43b8ae87c ("ASoC: rsnd: protect mod->status")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ycm6t7l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 1f9c82b5ab ("ASoC: rsnd: add debugfs support") added
CONFIG_DEBUG_FS related definitions on rsnd.h, but it should be
added inside of RSND_H. This patch fixup it.
Fixes: 1f9c82b5ab ("ASoC: rsnd: add debugfs support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cx26t7r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd sets "channels_min" which is used from
snd_soc_dai_stream_valid() without checking DT playback/capture property.
Thus, "aplay -l" or "arecord -l" will indicate un-exising device.
This patch checks DT proerty and do nothing playback/capture settings if
not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rhi6t7x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_adg_clk_dbg_info() is using locak clk_name[] to ndicating
clk name, but we don't want to use local clk_name[] everywhere when we
support R-Car Gen4 sound to handling non compatible clk naming.
This patch uses __clk_get_name() instead of local clk_name[] for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8mz8wcs.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-pcm.c is coping fe hw_param to dpcm->hw_param (A),
fixup it (B), and copy it to be (C).
int dpcm_be_dai_hw_params(...)
{
...
for_each_dpcm_be(fe, stream, dpcm) {
...
/* copy params for each dpcm */
(A) memcpy(&dpcm->hw_params, &fe->dpcm[stream].hw_params, ...) ;
/* perform any hw_params fixups */
(B) ret = snd_soc_link_be_hw_params_fixup(be, &dpcm->hw_params);
...
/* copy the fixed-up hw params for BE dai */
(C) memcpy(&be->dpcm[stream].hw_params, &dpcm->hw_params, ...);
...
}
...
}
But here, (1) it is coping hw_params without caring stream (Playback/Capture),
(2) we can get same value from be. We don't need to have dpcm->hw_params.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ogsl6h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit e4d8aef214 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927140948.17696-4-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As rsnd_mod_power_on() can return negative numbers,
it should be better to check the return value and
deal with the exception.
Fixes: e7d850dd10 ("ASoC: rsnd: use mod base common method on SSI-parent")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220902013030.3691266-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
