master
9 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andrii Nakryiko
|
81eff2e364 |
bpf: simplify tnum output if a fully known constant
Emit tnum representation as just a constant if all bits are known. Use decimal-vs-hex logic to determine exact format of emitted constant value, just like it's done for register range values. For that move tnum_strn() to kernel/bpf/log.c to reuse decimal-vs-hex determination logic and constants. Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231202175705.885270-12-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
67420501e8 |
bpf: generalize reg_set_min_max() to handle non-const register comparisons
Generalize bounds adjustment logic of reg_set_min_max() to handle not just register vs constant case, but in general any register vs any register cases. For most of the operations it's trivial extension based on range vs range comparison logic, we just need to properly pick min/max of a range to compare against min/max of the other range. For BPF_JSET we keep the original capabilities, just make sure JSET is integrated in the common framework. This is manifested in the internal-only BPF_JSET + BPF_X "opcode" to allow for simpler and more uniform rev_opcode() handling. See the code for details. This allows to reuse the same code exactly both for TRUE and FALSE branches without explicitly handling both conditions with custom code. Note also that now we don't need a special handling of BPF_JEQ/BPF_JNE case none of the registers are constants. This is now just a normal generic case handled by reg_set_min_max(). To make tnum handling cleaner, tnum_with_subreg() helper is added, as that's a common operator when dealing with 32-bit subregister bounds. This keeps the overall logic much less noisy when it comes to tnums. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://lore.kernel.org/r/20231112010609.848406-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Harishankar Vishwanathan
|
05924717ac |
bpf, tnums: Provably sound, faster, and more precise algorithm for tnum_mul
This patch introduces a new algorithm for multiplication of tristate numbers (tnums) that is provably sound. It is faster and more precise when compared to the existing method. Like the existing method, this new algorithm follows the long multiplication algorithm. The idea is to generate partial products by multiplying each bit in the multiplier (tnum a) with the multiplicand (tnum b), and adding the partial products after appropriately bit-shifting them. The new algorithm, however, uses just a single loop over the bits of the multiplier (tnum a) and accumulates only the uncertain components of the multiplicand (tnum b) into a mask-only tnum. The following paper explains the algorithm in more detail: https://arxiv.org/abs/2105.05398. A natural way to construct the tnum product is by performing a tnum addition on all the partial products. This algorithm presents another method of doing this: decompose each partial product into two tnums, consisting of the values and the masks separately. The mask-sum is accumulated within the loop in acc_m. The value-sum tnum is generated using a.value * b.value. The tnum constructed by tnum addition of the value-sum and the mask-sum contains all possible summations of concrete values drawn from the partial product tnums pairwise. We prove this result in the paper. Our evaluations show that the new algorithm is overall more precise (producing tnums with less uncertain components) than the existing method. As an illustrative example, consider the input tnums A and B. The numbers in the parenthesis correspond to (value;mask). A = 000000x1 (1;2) B = 0010011x (38;1) A * B (existing) = xxxxxxxx (0;255) A * B (new) = 0x1xxxxx (32;95) Importantly, we present a proof of soundness of the new algorithm in the aforementioned paper. Additionally, we show that this new algorithm is empirically faster than the existing method. Co-developed-by: Matan Shachnai <m.shachnai@rutgers.edu> Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu> Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu> Signed-off-by: Matan Shachnai <m.shachnai@rutgers.edu> Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu> Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu> Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@rutgers.edu> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://arxiv.org/abs/2105.05398 Link: https://lore.kernel.org/bpf/20210531020157.7386-1-harishankar.vishwanathan@rutgers.edu |
||
|
John Fastabend
|
3f50f132d8 |
bpf: Verifier, do explicit ALU32 bounds tracking
It is not possible for the current verifier to track ALU32 and JMP ops
correctly. This can result in the verifier aborting with errors even though
the program should be verifiable. BPF codes that hit this can work around
it by changin int variables to 64-bit types, marking variables volatile,
etc. But this is all very ugly so it would be better to avoid these tricks.
But, the main reason to address this now is do_refine_retval_range() was
assuming return values could not be negative. Once we fixed this code that
was previously working will no longer work. See do_refine_retval_range()
patch for details. And we don't want to suddenly cause programs that used
to work to fail.
The simplest example code snippet that illustrates the problem is likely
this,
53: w8 = w0 // r8 <- [0, S32_MAX],
// w8 <- [-S32_MIN, X]
54: w8 <s 0 // r8 <- [0, U32_MAX]
// w8 <- [0, X]
The expected 64-bit and 32-bit bounds after each line are shown on the
right. The current issue is without the w* bounds we are forced to use
the worst case bound of [0, U32_MAX]. To resolve this type of case,
jmp32 creating divergent 32-bit bounds from 64-bit bounds, we add explicit
32-bit register bounds s32_{min|max}_value and u32_{min|max}_value. Then
from branch_taken logic creating new bounds we can track 32-bit bounds
explicitly.
The next case we observed is ALU ops after the jmp32,
53: w8 = w0 // r8 <- [0, S32_MAX],
// w8 <- [-S32_MIN, X]
54: w8 <s 0 // r8 <- [0, U32_MAX]
// w8 <- [0, X]
55: w8 += 1 // r8 <- [0, U32_MAX+1]
// w8 <- [0, X+1]
In order to keep the bounds accurate at this point we also need to track
ALU32 ops. To do this we add explicit ALU32 logic for each of the ALU
ops, mov, add, sub, etc.
Finally there is a question of how and when to merge bounds. The cases
enumerate here,
1. MOV ALU32 - zext 32-bit -> 64-bit
2. MOV ALU64 - copy 64-bit -> 32-bit
3. op ALU32 - zext 32-bit -> 64-bit
4. op ALU64 - n/a
5. jmp ALU32 - 64-bit: var32_off | upper_32_bits(var64_off)
6. jmp ALU64 - 32-bit: (>> (<< var64_off))
Details for each case,
For "MOV ALU32" BPF arch zero extends so we simply copy the bounds
from 32-bit into 64-bit ensuring we truncate var_off and 64-bit
bounds correctly. See zext_32_to_64.
For "MOV ALU64" copy all bounds including 32-bit into new register. If
the src register had 32-bit bounds the dst register will as well.
For "op ALU32" zero extend 32-bit into 64-bit the same as move,
see zext_32_to_64.
For "op ALU64" calculate both 32-bit and 64-bit bounds no merging
is done here. Except we have a special case. When RSH or ARSH is
done we can't simply ignore shifting bits from 64-bit reg into the
32-bit subreg. So currently just push bounds from 64-bit into 32-bit.
This will be correct in the sense that they will represent a valid
state of the register. However we could lose some accuracy if an
ARSH is following a jmp32 operation. We can handle this special
case in a follow up series.
For "jmp ALU32" mark 64-bit reg unknown and recalculate 64-bit bounds
from tnum by setting var_off to ((<<(>>var_off)) | var32_off). We
special case if 64-bit bounds has zero'd upper 32bits at which point
we can simply copy 32-bit bounds into 64-bit register. This catches
a common compiler trick where upper 32-bits are zeroed and then
32-bit ops are used followed by a 64-bit compare or 64-bit op on
a pointer. See __reg_combine_64_into_32().
For "jmp ALU64" cast the bounds of the 64bit to their 32-bit
counterpart. For example s32_min_value = (s32)reg->smin_value. For
tnum use only the lower 32bits via, (>>(<<var_off)). See
__reg_combine_64_into_32().
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560419880.10843.11448220440809118343.stgit@john-Precision-5820-Tower
|
||
|
Daniel Borkmann
|
0af2ffc93a |
bpf: Fix incorrect verifier simulation of ARSH under ALU32
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (85) call bpf_get_socket_cookie#46 1: R0_w=invP(id=0) R10=fp0 1: (57) r0 &= 808464432 2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 2: (14) w0 -= 810299440 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 3: (c4) w0 s>>= 1 4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 4: (76) if w0 s>= 0x30303030 goto pc+216 221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 221: (95) exit processed 6 insns (limit 1000000) [...] Taking a closer look, the program was xlated as follows: # ./bpftool p d x i 12 0: (85) call bpf_get_socket_cookie#7800896 1: (bf) r6 = r0 2: (57) r6 &= 808464432 3: (14) w6 -= 810299440 4: (c4) w6 s>>= 1 5: (76) if w6 s>= 0x30303030 goto pc+216 6: (05) goto pc-1 7: (05) goto pc-1 8: (05) goto pc-1 [...] 220: (05) goto pc-1 221: (05) goto pc-1 222: (95) exit Meaning, the visible effect is very similar to |
||
|
Thomas Gleixner
|
457c899653 |
treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Yonghong Song
|
9cbe1f5a32 |
bpf/verifier: improve register value range tracking with ARSH
When helpers like bpf_get_stack returns an int value
and later on used for arithmetic computation, the LSH and ARSH
operations are often required to get proper sign extension into
64-bit. For example, without this patch:
54: R0=inv(id=0,umax_value=800)
54: (bf) r8 = r0
55: R0=inv(id=0,umax_value=800) R8_w=inv(id=0,umax_value=800)
55: (67) r8 <<= 32
56: R8_w=inv(id=0,umax_value=3435973836800,var_off=(0x0; 0x3ff00000000))
56: (c7) r8 s>>= 32
57: R8=inv(id=0)
With this patch:
54: R0=inv(id=0,umax_value=800)
54: (bf) r8 = r0
55: R0=inv(id=0,umax_value=800) R8_w=inv(id=0,umax_value=800)
55: (67) r8 <<= 32
56: R8_w=inv(id=0,umax_value=3435973836800,var_off=(0x0; 0x3ff00000000))
56: (c7) r8 s>>= 32
57: R8=inv(id=0, umax_value=800,var_off=(0x0; 0x3ff))
With better range of "R8", later on when "R8" is added to other register,
e.g., a map pointer or scalar-value register, the better register
range can be derived and verifier failure may be avoided.
In our later example,
......
usize = bpf_get_stack(ctx, raw_data, max_len, BPF_F_USER_STACK);
if (usize < 0)
return 0;
ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
......
Without improving ARSH value range tracking, the register representing
"max_len - usize" will have smin_value equal to S64_MIN and will be
rejected by verifier.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Edward Cree
|
b03c9f9fdc |
bpf/verifier: track signed and unsigned min/max values
Allows us to, sometimes, combine information from a signed check of one bound and an unsigned check of the other. We now track the full range of possible values, rather than restricting ourselves to [0, 1<<30) and considering anything beyond that as unknown. While this is probably not necessary, it makes the code more straightforward and symmetrical between signed and unsigned bounds. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Edward Cree
|
f1174f77b5 |
bpf/verifier: rework value tracking
Unifies adjusted and unadjusted register value types (e.g. FRAME_POINTER is now just a PTR_TO_STACK with zero offset). Tracks value alignment by means of tracking known & unknown bits. This also replaces the 'reg->imm' (leading zero bits) calculations for (what were) UNKNOWN_VALUEs. If pointer leaks are allowed, and adjust_ptr_min_max_vals returns -EACCES, treat the pointer as an unknown scalar and try again, because we might be able to conclude something about the result (e.g. pointer & 0x40 is either 0 or 0x40). Verifier hooks in the netronome/nfp driver were changed to match the new data structures. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> |