All of the config data files and all of the register definition
files (plus a few others) use GSI_EE_AP, which is defined in
"ipa_version.h". Include that header where it's needed.
All of the IPA register definition files include "../ipa.h", though
none of them need anything defined there. Similarly, all of the GSI
register definition files include "../gsi.h", but don't need anything
defined there. Remove these unnneded includes.
All of the configuration data files include "../gsi.h", though none
of them need anything defined there, so remove these includes.
Remove other includes of local header files that are not required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some IPA header files use types defined in <linux/types.h>, but do
not include that file:
- In "ipa_mem.h", the ipa_mem structure has u16 and u32 fields
- In "ipa_power.h", ipa_power_retention() takes a bool argument,
and ipa_core_clock_rate() returns u32
- In "ipa_version.h", ipa_version_supported() returns bool
Include it in these files to satisfy their dependencies.
The ipa_qmi structure (defined in "ipa_qmi.h") contains a work
structure, so include <linux/workqueue.h> in there.
All of the data and register definition files, as well as "reg.h",
use the ARRAY_SIZE() macro. Include <linux/array_size.h> everywhere
it's used.
Similarly, all register definition files (and a few others) use the
GENMASK() macro, so include <linux/bits.h> to ensure it's defined
where used. BIT() becomes available by including this file also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we explicitly define each register field width there is no
need to have a special encoding function for the event ring length.
Add a field for this to the EV_CH_E_CNTXT_1 GSI register, and use it
in place of ev_ch_e_cntxt_1_length_encode() (which can be removed).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Starting at IPA v4.5, almost all GSI registers had their offsets
changed by a fixed amount (shifted downward by 0xd000). Rather than
defining offsets for all those registers dependent on version, an
adjustment was applied for most register accesses. This was
implemented in commit cdeee49f3e ("net: ipa: adjust GSI register
addresses"). It was later modified to be a bit more obvious about
the adjusment, in commit 571b1e7e58 ("net: ipa: use a separate
pointer for adjusted GSI memory").
We now are able to define every GSI register with its own offset, so
there's no need to implement this special adjustment.
So get rid of the "virt_raw" pointer, and just maintain "virt" as
the (non-adjusted) base address of I/O mapped GSI register memory.
Redefine the offsets of all GSI registers (other than the INTER_EE
ones, which were not subject to the adjustment) for IPA v4.5+,
subtracting 0xd000 from their defined offsets instead.
Move the ERROR_LOG and ERROR_LOG_CLR definitions further down in the
register definition files so all registers are defined in order of
their offset.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Define field IDs for the remaining GSI registers, and populate the
register definition files accordingly. Use the reg_*() functions to
access field values for those regiters, and get rid of the previous
field definition constants.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define field IDs for the EV_CH_E_CNTXT_0 and EV_CH_E_CNTXT_8 GSI
registers, and populate the register definition files accordingly.
Use the reg_*() functions to access field values for those regiters,
and get rid of the previous field definition constants.
The remaining EV_CH_E_CNTXT_* registers are written with full 32-bit
values (and have no fields).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Beyond the CH_C_QOS register, two other registers whose offset is
related to channel number have fields within them.
Define the fields within the CH_C_CNTXT_0 GSI register, using an
enumerated type to identify the register's fields, and define an
array of field masks to use for that register's reg structure.
For the CH_C_CNTXT_1 GSI register, ch_c_cntxt_1_length_encode()
previously hid the difference in bit width in the channel ring
length field. Instead, define a new field CH_R_LENGTH and encode
the ring size with reg_encode().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define the fields within the CH_C_QOS GSI register using an array of
field masks in that register's reg structure. Use the reg functions
for encoding values in those fields.
One field in the register is present for IPA v4.0-4.2 only, two
others are present starting at IPA v4.5, and one more is there
starting at IPA v4.9.
Drop the "GSI_" prefix in symbols defined in the gsi_prefetch_mode
enumerated type, and define their values using decimal rather than
hexidecimal values.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the remaining GSI register offset definitions. Use gsi_reg()
rather than the corresponding GSI_*_OFFSET() macros to get the
offsets for these registers, and get rid of the macros.
Note that we are now defining information for the HW_PARAM_2
register, and that doesn't appear until IPA v3.5.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definitions of the offsets for IRQ-related GSI registers. Use
gsi_reg() rather than the corresponding GSI_CNTXT_*_OFFSET() macros
to get the offsets for these registers, and get rid of the macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definitions of the offsets and strides for registers whose
offset depends on an event ring ID, and use gsi_reg() and its
returned value to determine offsets for these registers. Get
rid of the corresponding GSI_EV_CH_E_*_OFFSET() macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Continue populating with GSI register definitions, adding remaining
registers whose offset depends on a channel ID. Use gsi_reg() and
reg_n_offset() to determine offsets for those registers, and get rid
of the corresponding GSI_CH_C_*_OFFSET() macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a new register definition file in the "reg" subdirectory,
and begin populating it with GSI register definitions based on IPA
version. The GSI registers haven't changed much, so several IPA
versions can share the same GSI register definitions.
As with IPA registers, an array of pointers indexed by GSI register ID
refers to these register definitions, and a new "regs" field in the
GSI structure is initialized in gsi_reg_init() to refer to register
information based on the IPA version (though for now there's only
one). The new function gsi_reg() returns register information for
a given GSI register, and the result can be used to look up that
register's offset.
This patch is meant only to put the infrastructure in place, so only
eon register (CH_C_QOS) is defined for each version, and only the
offset and stride are defined for that register. Use new function
gsi_reg() to look up that register's information to get its offset,
This makes the GSI_CH_C_QOS_OFFSET() unnecessary, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
