The sysfb framebuffer handling only operates on graphics devices
that provide the system's firmware framebuffer. If that device is
not known, assume that any graphics device has been initialized by
firmware.
Fixes a problem on i915 where sysfb does not release the firmware
framebuffer after the native graphics driver loaded.
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/dri-devel/SJ1PR11MB6129EFB8CE63D1EF6D932F94B96F2@SJ1PR11MB6129.namprd11.prod.outlook.com/
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12160
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b49420d6a1 ("video/aperture: optionally match the device in sysfb_disable()")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org> # v6.11+
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924084227.262271-1-tzimmermann@suse.de
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
Retrieving the system framebuffer's parent device in sysfb_init()
increments the parent device's reference count. Hence release the
reference before leaving the init function.
Adding the sysfb platform device acquires and additional reference
for the parent. This keeps the parent device around while the system
framebuffer is in use.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9eac534db0 ("firmware/sysfb: Set firmware-framebuffer parent device")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081818.15696-1-tzimmermann@suse.de
This error path accidentally returns success when it should preserve the
error code from sysfb_parent_dev().
Fixes: 4e754597d6 ("firmware/sysfb: Create firmware device only for enabled PCI devices")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/aaaa2e13-849b-41a0-8186-25f3d2a16f86@moroto.mountain
On ARM PCI systems, the PCI hierarchy might be reconfigured during
boot and the firmware framebuffer might move as a result of that.
The values in screen_info will then be invalid.
Work around this problem by tracking the framebuffer's initial
location before it get relocated; then fix the screen_info state
between reloaction and creating the firmware framebuffer's device.
This functionality has been lifted from efifb. See the commit message
of commit 55d728a40d ("efi/fb: Avoid reconfiguration of BAR that
covers the framebuffer") for more information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-8-tzimmermann@suse.de
Test if the firmware framebuffer's parent PCI device, if any, has
been enabled. If not, the firmware framebuffer is most likely not
working. Hence, do not create a device for the firmware framebuffer
on disabled PCI devices.
So far, efifb tracked the status of the PCI parent device internally
and did not bind if it was disabled. This patch implements the
functionality for all PCI-based firmware framebuffers.
v3:
* make commit message more precise (Sui)
v2:
* rework sysfb_pci_dev_is_enabled() (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-6-tzimmermann@suse.de
Set the firmware framebuffer's parent device, which usually is the
graphics hardware's physical device. Integrates the framebuffer in
the Linux device hierarchy and lets Linux handle dependencies among
devices. For example, the graphics hardware won't be suspended while
the firmware device is still active.
v4:
* fix build for CONFIG_SYSFB_SIMPLEFB=n, again
v3:
* fix build for CONFIG_SYSFB_SIMPLEFB=n (Sui)
* test result of screen_info_pci_dev() for errors (Sui)
v2:
* detect parent device in sysfb_parent_dev()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-4-tzimmermann@suse.de
Consider a configuration like this:
1, efifb (or simpledrm) is built-in;
2, a native display driver (such as radeon) is also built-in.
As Javier said, this is not a common configuration (the native display
driver is usually built as a module), but it can happen and cause some
trouble.
In this case, since efifb, radeon and sysfb are all in device_initcall()
level, the order in practise is like this:
efifb registered at first, but no "efi-framebuffer" device yet. radeon
registered later, and /dev/fb0 created. sysfb_init() comes at last, it
registers "efi-framebuffer" and then causes an error message "efifb: a
framebuffer is already registered". Make sysfb_init() to be subsys_
initcall_sync() can avoid this. And Javier Martinez Canillas is trying
to make a more general solution in commit 873eb3b118 ("fbdev: Disable
sysfb device registration when removing conflicting FBs").
However, this patch still makes sense because it can make the screen
display as early as possible (We cannot move to subsys_initcall, since
sysfb_init() should be executed after PCI enumeration).
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220704011704.1418055-1-chenhuacai@loongson.cn
Commit 8633ef82f1 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.
This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.
To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.
Fixes: 8633ef82f1 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: stable@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move the device-creation from vga16fb to sysfb code. The driver's
videomode checks are independent from device creation, so move them
into vga16fb's probe function. This will allow to create the module
init/exit code automatically.
The vga16fb driver requires a screen_info for type VIDEO_TYPE_VGAC
or VIDEO_TYPE_EGAC. Such code is nowhere present in the kernel, except
for some MIPS systems. It's not clear if the vga16fb driver actually
works in practice.
v2:
* keep driver name to "vga16fb" (Javier)
* give rational for moving mode checks (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718072322.8927-3-tzimmermann@suse.de
This can be used by subsystems to unregister a platform device registered
by sysfb and also to disable future platform device registration in sysfb.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com
This function just returned 0 on success or an errno code on error, but it
could be useful for sysfb_init() callers to have a pointer to the device.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-2-javierm@redhat.com
The register_gop_device() function registers an "efi-framebuffer" platform
device to match against the efifb driver, to have an early framebuffer for
EFI platforms.
But there is already support to do exactly the same by the Generic System
Framebuffers (sysfb) driver. This used to be only for X86 but it has been
moved to drivers/firmware and could be reused by other architectures.
Also, besides supporting registering an "efi-framebuffer", this driver can
register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers
on non-X86 EFI platforms. For example, on aarch64 these drivers can only
be used with DT and doesn't have code to register a "simple-frambuffer"
platform device when booting with EFI.
For these reasons, let's remove the register_gop_device() duplicated code
and instead move the platform specific logic that's there to sysfb driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com
The x86 architecture has generic support to register a system framebuffer
platform device. It either registers a "simple-framebuffer" if the config
option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device.
But the code is generic enough to be reused by other architectures and can
be moved out of the arch/x86 directory.
This will allow to also support the simple{fb,drm} drivers on non-x86 EFI
platforms, such as aarch64 where these drivers are only supported with DT.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com
