When receiving data in cyclic mode from PDMA peripherals, where reload
count is set to infinite, any TR in the set can potentially be the last
one of the overall transfer. In such cases, the EOP flag needs to be set
in each TR and PDMA's Static TR "Z" parameter should be set, matching
the size of the TR.
This is required for the teardown to function properly and cleanup the
internal state memory. This only affects platforms using BCDMA and not
those using UDMA-P, which could set EOP flag in the teardown TR
automatically.
Similarly when transmitting data in cyclic mode to PDMA peripherals, the
EOP flag needs to be set to get the teardown completion signal
correctly.
Fixes: 0177947397 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <jai.luthra@linux.dev>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240930-z_cnt-v2-1-9d38aba149a2@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma
-----BEGIN PGP SIGNATURE-----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=beF+
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
With the new __counted_by annocation, the "sglen" struct member must
be set before accessing the "sg" array. This initialization was done in
other places where a new struct omap_desc is allocated, but these cases
were missed. Set "sglen" after allocation.
Fixes: b85178611c ("dmaengine: ti: omap-dma: Annotate struct omap_desc with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716215702.work.802-kees@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using dma
vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings, sprd sc9860 dma
binding
- Altera msgdma updates for descriptor management
-----BEGIN PGP SIGNATURE-----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=h0hh
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/k3-udma.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/k3-udma-glue.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/k3-psil-lib.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-dma-ti-v1-1-b1154603f341@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With ARCH=arm, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/cppi41.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-arm-drivers-dma-ti-v1-1-496d243158dd@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Unlike other channel counts in CAPx registers, BCDMA BCHAN CNT doesn't
include UHC and HC BC channels. So include them explicitly to arrive at
total BC channel in the instance.
Fixes: 8844898028 ("dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240607-bcdma_chan_cnt-v2-1-bf1a55529d91@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The of_k3_udma_glue_parse_chn_by_id() helper function erroneously
invokes "of_node_put()" on the "udmax_np" device-node passed to it,
without having incremented its reference count at any point. Fix it.
Fixes: 81a1f90f20 ("dmaengine: ti: k3-udma-glue: Add function to parse channel by ID")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Peter Ujfalusi@gmail.com
Link: https://lore.kernel.org/r/20240602013319.2975894-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the k3_udma_glue_rx_get_irq() function returns either negative
error codes or zero on error. Generally, in the kernel, zero means
success so this be confusing and has caused bugs in the past. Also the
"tx" version of this function only returns negative error codes. Let's
clean this "rx" function so both functions match.
This patch has no effect on runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/idxd/idxd.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/omap-dma.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/dmatest.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ioat/ioatdma.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240606-md-drivers-dma-v2-1-0770dfdf74dd@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs
-----BEGIN PGP SIGNATURE-----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=DZRZ
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs:
* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: of: constify of_phandle_args in of_dma_find_controller()
dmaengine: pl08x: constify pointer to char in filter function
MAINTAINERS: change in AMD ptdma maintainer
MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
dmaengine: idxd: constify the struct device_type usage
dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
dmaengine: idxd: make dsa_bus_type const
dmaengine: fsl-edma: integrate TCD64 support for i.MX95
dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
dmaengine: fsl-edma: fix spare build warning
dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
dt-bindings: mmp-dma: convert to YAML
dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
...
The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can
have up to 32 threads per instance. J721S2 has two instances of the
subsystem, so there are 64 threads total, Add them to the endpoint map.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240125111449.855876-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing function k3_udma_glue_request_remote_rx_chn() supports
requesting an RX DMA channel and flow by the name of the RX DMA channel.
Add support to request RX DMA channel for a given thread ID in the form of
a new function named k3_udma_glue_request_remote_rx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the RX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_remote_rx_chn_for_thread_id()
reuses most of the code in k3_udma_glue_request_remote_rx_chn(), create a
new function named k3_udma_glue_request_remote_rx_chn_common() for the
common code.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-5-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing function k3_udma_glue_request_tx_chn() supports requesting
a TX DMA channel by its name. Add a new function to request TX DMA channel
for a given thread ID, named k3_udma_glue_request_tx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the TX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_tx_chn_for_thread_id() reuses
most of the code in k3_udma_glue_request_tx_chn(), create a new function
for the common code, named k3_udma_glue_request_tx_chn_common().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-4-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A single RX Channel can have multiple flows. It is possible that a
single device requests multiple flows on the same RX Channel. In such
cases, the existing implementation of naming the device on the basis of
the RX Channel can result in duplicate names. The existing implementation
only uses the RX Channel source thread when naming, which implies duplicate
names when different flows are being requested on the same RX Channel.
In order to avoid duplicate names, include the RX flow as well in the name.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-3-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing helper function of_k3_udma_glue_parse() fetches the DMA
Channel thread ID from the device-tree node. This makes it necessary to
have a device-tree node with the Channel thread IDs populated. However,
in the case where the thread ID is known by alternate methods (an
example being that of Firmware running on remote core sharing details of
the thread IDs), there is no equivalent function to implement the
functionality of the existing of_k3_udma_glue_parse() function. In such
cases, the driver utilizing the DMA APIs might not even have a
device-tree node to begin with, since it could be probed with other
methods (RPMsg-Bus for example).
Add the of_k3_udma_glue_parse_chn_by_id() helper function which accepts
the thread ID as an argument, thereby making it unnecessary to have a
device-tree node for obtaining the thread ID.
Since of_k3_udma_glue_parse() and of_k3_udma_glue_parse_chn_by_id()
share a lot of code in common, create a new function to handle the
common code which is named as of_k3_udma_glue_parse_chn_common().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-2-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Propagate the TR response status to the device using BCDMA
split-channels. For example CSI-RX driver should be able to check if a
frame was not transferred completely (short packet) and needs to be
discarded.
Fixes: 25dcb5dd7b ("dmaengine: ti: New driver for K3 UDMA")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240103-tr_resp_err-v1-1-2fdf6d48ab92@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240118031929.192192-1-chentao@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add PSIL thread information and enable UDMA support for AM62P
and J722S SoC. J722S SoC family is a superset of AM62P, thus
common PSIL thread ID map is reused for both devices.
For those interested, more details about the SoC can be found
in the Technical Reference Manual here:
AM62P - https://www.ti.com/lit/pdf/spruj83
J722S - https://www.ti.com/lit/zip/sprujb3
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231213081318.26203-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads.
This also fixes the thread numbers.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 5ac6bfb587 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The k3_udma_glue_tx_get_irq() function currently returns negative error
codes on error, zero on error and positive values for success. This
complicates life for the callers who need to propagate the error code.
Also GCC will not warn about unsigned comparisons when you check:
if (unsigned_irq <= 0)
All the callers have been fixed now but let's just make this easy going
forward.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error. So this check for valid IRQs should only
accept values > 0.
Fixes: 2b6b3b7420 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct omap_desc.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230817235859.49846-18-keescook@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct edma_desc.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230817235859.49846-17-keescook@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230919133207.1400430-53-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230919133207.1400430-52-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230919133207.1400430-51-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143138.1066177-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers
-----BEGIN PGP SIGNATURE-----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=pGmA
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
We get a warning when PM is not set:
../drivers/dma/ti/k3-udma.c:5552:12: warning: 'udma_pm_resume' defined but not used [-Wunused-function]
5552 | static int udma_pm_resume(struct device *dev)
| ^~~~~~~~~~~~~~
../drivers/dma/ti/k3-udma.c:5530:12: warning: 'udma_pm_suspend' defined but not used [-Wunused-function]
5530 | static int udma_pm_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Fix this by annotating pm function with __maybe_unused
Fixes: fbe05149e4 ("dmaengine: ti: k3-udma: Add system suspend/resume support")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20230516174311.117264-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
J721S2 has dedicated BCDMA instance for Camera Serial Interface RX
and TX. The BCDMA instance supports RX and TX channels but block copy
channels are not present, add support for the same.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230505143929.28131-3-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
clang with W=1 reports
drivers/dma/ti/edma.c:321:20: error: unused function
'edma_and' [-Werror,-Wunused-function]
static inline void edma_and(struct edma_cc *ecc, int offset, unsigned and)
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230320231209.1728940-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Per [1], UDMA TR15 transactions may hang if ICNT0 is less than 64B
Work around is to set EOL flag is to 1 for ICNT0.
Since, there is no performance penalty / side effects of setting EOL
flag event ICNTO > 64B, just set the flag for all UDMAP TR15
descriptors.
[1] https://www.ti.com/lit/er/sprz455a/sprz455a.pdf
Errata doc for J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0
(Rev. A)
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[j-choudhary@ti.com: minor cleanups]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20230323120107.27638-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The K3 platforms configure the DMA resources with the
help of the TI's System Firmware's Device Manager(DM)
over TISCI. The group of DMA related Resource Manager[1]
TISCI messages includes: INTA, RINGACC, UDMAP, and PSI-L.
This configuration however, does not persist in the DM
after leaving from Suspend-to-RAM state. We have to restore
the DMA channel configuration over TISCI for all configured
channels when returning from suspend.
The TISCI resource management calls for each DMA type (UDMA,
PKTDMA, BCDMA) happen in device_free_chan_resources() and
device_alloc_chan_resources(). In pm_suspend() we store
the current udma_chan_config for channels that still have
attached clients and call device_free_chan_resources().
In pm_resume() restore the udma_channel_config from backup
and call device_alloc_chan_resources() for those channels.
Drivers like CPSW that use k3-udma-glue already do their own
DMA resource management so use the late system suspend/resume hooks.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/index.html#resource-management-rm
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[g-vlaev@ti.com: Add patch description and config backup]
[g-vlaev@ti.com: Supend only channels with clients]
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230329155349.2566010-1-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- TI AM62Ax controller support
- Xilinx xdma driver
- Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller
Updates:
- Runtime pm support for at_xdmac driver
- IMX sdma binding conversion to yaml and HDMI audio support
- IMX mxs binding conversion to yaml
-----BEGIN PGP SIGNATURE-----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=xtfI
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A new driver, couple of device support and binding conversion along
with bunch of driver updates are the main features of this.
New hardware support:
- TI AM62Ax controller support
- Xilinx xdma driver
- Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller
Updates:
- Runtime pm support for at_xdmac driver
- IMX sdma binding conversion to yaml and HDMI audio support
- IMX mxs binding conversion to yaml"
* tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dmaengine: idma64: Update bytes_transferred field
dmaengine: imx-sdma: Set DMA channel to be private
dmaengine: dw: Move check for paused channel to dwc_get_residue()
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
dmaengine: dw-axi-dmac: Do not dereference NULL structure
dmaengine: idxd: Fix default allowed read buffers value in group
dmaengine: sf-pdma: pdma_desc memory leak fix
dmaengine: Simplify dmaenginem_async_device_register() function
dmaengine: use sysfs_emit() to instead of scnprintf()
dmaengine: Make an order in struct dma_device definition
dt-bindings: dma: cleanup examples - indentation, lowercase hex
dt-bindings: dma: drop unneeded quotes
dmaengine: xilinx: xdma: Add user logic interrupt support
dmaengine: xilinx: xdma: Add xilinx xdma driver
dmaengine: drivers: Use devm_platform_ioremap_resource()
dmaengine: at_xdmac: remove empty line
dmaengine: at_xdmac: add runtime pm support
dmaengine: at_xdmac: align properly function members
dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs
dmaengine: sun6i: Set the maximum segment size
...
platform_get_resource() and devm_ioremap_resource() are wrapped up in the
devm_platform_ioremap_resource() helper. Use the helper and get rid of the
local variable for struct resource *. We now have a function call less.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221110152528.7821-1-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop the non-fatal probe deferral log for getting MSI domain.
This makes the kernel log clean and we do not get recurring logs
stating: "Failed to get MSI domain".
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230117051855.29644-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
PSIL_EP_NATIVE endpoints may not have PEER registers for BCNT and thus
udma_decrement_byte_counters() should not try to decrement these counters.
This fixes the issue of crypto IPERF testing where the client side (EVM)
hangs without transfer of packets to the server side, seen since this
function was added.
Fixes: 7c94dcfa8f ("dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221128085005.489964-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
BCDMA CSI RX present on AM62Ax SoC is a dedicated DMA for servicing
Camera Serial Interface (CSI) IP. Add support for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-6-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AM62A SoC has a BCDMA and PKTDMA as systems DMAs for service various
peripherals similar to AM64 SoC. Add support for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-5-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reusing loop iterator fails if BCHAN is not present as iterator is
uninitialized
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
