The SM2 algorithm has a single user in the kernel. However, it's
never been integrated properly with that user: asymmetric_keys.
The crux of the issue is that the way it computes its digest with
sm3 does not fit into the architecture of asymmetric_keys. As no
solution has been proposed, remove this algorithm.
It can be resubmitted when it is integrated properly into the
asymmetric_keys subsystem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with a large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new API type lskcipher designed for taking straight kernel
pointers instead of SG lists. Its relationship to skcipher will
be analogous to that between shash and ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Split out the sign/verify functionality from the existing akcipher
interface. Most algorithms in akcipher either support encryption
and decryption, or signing and verify. Only one supports both.
As a signature algorithm may not support encryption at all, these
two should be spearated.
For now sig is simply a wrapper around akcipher as all algorithms
remain unchanged. This is a first step and allows users to start
allocating sig instead of akcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Give geniv its own Kconfig option so that its dependencies are
distinct from that of the AEAD API code. This also allows it
to be disabled if no IV generators (seqiv/echainiv) are enabled.
Remove the obsolete select on RNG2 by SKCIPHER2 as skcipher IV
generators disappeared long ago.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The test interface allows a privileged process to capture the raw
unconditioned noise that is collected by the Jitter RNG for statistical
analysis. Such testing allows the analysis how much entropy
the Jitter RNG noise source provides on a given platform. The obtained
data is the time stamp sampled by the Jitter RNG. Considering that
the Jitter RNG inserts the delta of this time stamp compared to the
immediately preceding time stamp, the obtained data needs to be
post-processed accordingly to obtain the data the Jitter RNG inserts
into its entropy pool.
The raw entropy collection is provided to obtain the raw unmodified
time stamps that are about to be added to the Jitter RNG entropy pool
and are credited with entropy. Thus, this patch adds an interface
which renders the Jitter RNG insecure. This patch is NOT INTENDED
FOR PRODUCTION SYSTEMS, but solely for development/test systems to
verify the available entropy rate.
Access to the data is given through the jent_raw_hires debugfs file.
The data buffer should be multiples of sizeof(u32) to fill the entire
buffer. Using the option jitterentropy_testing.boot_raw_hires_test=1
the raw noise of the first 1000 entropy events since boot can be
sampled.
This test interface allows generating the data required for
analysis whether the Jitter RNG is in compliance with SP800-90B
sections 3.1.3 and 3.1.4.
If the test interface is not compiled, its code is a noop which has no
impact on the performance.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The gf128mul library does not depend on the crypto API at all, so it can
be moved into lib/crypto. This will allow us to use it in other library
code in a subsequent patch without having to depend on CONFIG_CRYPTO.
While at it, change the Kconfig symbol name to align with other crypto
library implementations. However, the source file name is retained, as
it is reflected in the module .ko filename, and changing this might
break things for users.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It renames aria to aria_generic and exports some functions such as
aria_set_key(), aria_encrypt(), and aria_decrypt() to be able to be
used by aria-avx implementation.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It turns out that gcc-12.1 has some nasty problems with register
allocation on a 32-bit x86 build for the 64-bit values used in the
generic blake2b implementation, where the pattern of 64-bit rotates and
xor operations ends up making gcc generate horrible code.
As a result it ends up with a ridiculously large stack frame for all the
spills it generates, resulting in the following build problem:
crypto/blake2b_generic.c: In function ‘blake2b_compress_one_generic’:
crypto/blake2b_generic.c:109:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
on the same test-case, clang ends up generating a stack frame that is
just 296 bytes (and older gcc versions generate a slightly bigger one at
428 bytes - still nowhere near that almost 3kB monster stack frame of
gcc-12.1).
The issue is fixed both in mainline and the GCC 12 release branch [1],
but current release compilers end up failing the i386 allmodconfig build
due to this issue.
Disable the warning for now by simply raising the frame size for this
one file, just to keep this issue from having people turn off WERROR.
Link: https://lore.kernel.org/all/CAHk-=wjxqgeG2op+=W9sqgsWqCYnavC+SRfVyopu9-31S6xw+Q@mail.gmail.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105930 [1]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARIA(RFC 5794) is a symmetric block cipher algorithm.
This algorithm is being used widely in South Korea as a standard cipher
algorithm.
This code is written based on the ARIA implementation of OpenSSL.
The OpenSSL code is based on the distributed source code[1] by KISA.
ARIA has three key sizes and corresponding rounds.
ARIA128: 12 rounds.
ARIA192: 14 rounds.
ARIA245: 16 rounds.
[1] https://seed.kisa.or.kr/kisa/Board/19/detailView.do (Korean)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
BLAKE2s has no currently known use as an shash. Just remove all of this
unnecessary plumbing. Removing this shash was something we talked about
back when we were making BLAKE2s a built-in, but I simply never got
around to doing it. So this completes that project.
Importantly, this fixs a bug in which the lib code depends on
crypto_simd_disabled_for_test, causing linker errors.
Also add more alignment tests to the selftests and compare SIMD and
non-SIMD compression functions, to make up for what we lose from
testmgr.c.
Reported-by: gaochao <gaochao49@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6048fdcc5f ("lib/crypto: blake2s: include as built-in")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.
This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'
Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1 ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for HCTR2 as a template. HCTR2 is a length-preserving
encryption mode that is efficient on processors with instructions to
accelerate AES and carryless multiplication, e.g. x86 processors with
AES-NI and CLMUL, and ARM processors with the ARMv8 Crypto Extensions.
As a length-preserving encryption mode, HCTR2 is suitable for
applications such as storage encryption where ciphertext expansion is
not possible, and thus authenticated encryption cannot be used.
Currently, such applications usually use XTS, or in some cases Adiantum.
XTS has the disadvantage that it is a narrow-block mode: a bitflip will
only change 16 bytes in the resulting ciphertext or plaintext. This
reveals more information to an attacker than necessary.
HCTR2 is a wide-block mode, so it provides a stronger security property:
a bitflip will change the entire message. HCTR2 is somewhat similar to
Adiantum, which is also a wide-block mode. However, HCTR2 is designed
to take advantage of existing crypto instructions, while Adiantum
targets devices without such hardware support. Adiantum is also
designed with longer messages in mind, while HCTR2 is designed to be
efficient even on short messages.
HCTR2 requires POLYVAL and XCTR as components. More information on
HCTR2 can be found here: "Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for POLYVAL, an ε-Δ-universal hash function similar to
GHASH. This patch only uses POLYVAL as a component to implement HCTR2
mode. It should be noted that POLYVAL was originally specified for use
in AES-GCM-SIV (RFC 8452), but the kernel does not currently support
this mode.
POLYVAL is implemented as an shash algorithm. The implementation is
modified from ghash-generic.c.
For more information on POLYVAL see:
Length-preserving encryption with HCTR2:
https://eprint.iacr.org/2021/1441.pdf
AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption:
https://datatracker.ietf.org/doc/html/rfc8452
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a generic implementation of XCTR mode as a template. XCTR is a
blockcipher mode similar to CTR mode. XCTR uses XORs and little-endian
addition rather than big-endian arithmetic which has two advantages: It
is slightly faster on little-endian CPUs and it is less likely to be
implemented incorrect since integer overflows are not possible on
practical input sizes. XCTR is used as a component to implement HCTR2.
More information on XCTR mode can be found in the HCTR2 paper:
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lib/crypto libraries live in lib because they are used by various
drivers of the kernel. In contrast, the various helper functions in
crypto are there because they're used exclusively by the crypto API. The
SM3 and SM4 helper functions were erroniously moved into lib/crypto/
instead of crypto/, even though there are no in-kernel users outside of
the crypto API of those functions. This commit moves them into crypto/.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware specific features may be able to calculate a crc64, so provide
a framework for drivers to register their implementation. If nothing is
registered, fallback to the generic table lookup implementation. The
implementation is modeled after the crct10dif equivalent.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SP800-108 defines three KDFs - this patch provides the counter KDF
implementation.
The KDF is implemented as a service function where the caller has to
maintain the hash / HMAC state. Apart from this hash/HMAC state, no
additional state is required to be maintained by either the caller or
the KDF implementation.
The key for the KDF is set with the crypto_kdf108_setkey function which
is intended to be invoked before the caller requests a key derivation
operation via crypto_kdf108_ctr_generate.
SP800-108 allows the use of either a HMAC or a hash as crypto primitive
for the KDF. When a HMAC primtive is intended to be used,
crypto_kdf108_setkey must be used to set the HMAC key. Otherwise, for a
hash crypto primitve crypto_kdf108_ctr_generate can be used immediately
after allocating the hash handle.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
is A NIST cryptographic standard algorithm. Only signature verification
is implemented.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Salsa20 is not used anywhere in the kernel, is not suitable for disk
encryption, and widely considered to have been superseded by ChaCha20.
So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tiger is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This new module implement the SM2 public key algorithm. It was
published by State Encryption Management Bureau, China.
List of specifications for SM2 elliptic curve public key cryptography:
* GM/T 0003.1-2012
* GM/T 0003.2-2012
* GM/T 0003.3-2012
* GM/T 0003.4-2012
* GM/T 0003.5-2012
IETF: https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
oscca: http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml
scctc: http://www.gmbz.org.cn/main/bzlb.html
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of the deprecated ablkcipher interface have been
moved to the skcipher interface, ablkcipher is no longer used and
can be removed.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the generic Curve25519 library via the crypto API KPP interface.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wire up our newly added Blake2s implementation via the shash API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If aead is built as a module along with cryptomgr, it creates a
dependency loop due to the dependency chain aead => crypto_null =>
cryptomgr => aead.
This is due to the presence of the AEAD geniv code. This code is
not really part of the AEAD API but simply support code for IV
generators such as seqiv. This patch moves the geniv code into
its own module thus breaking the dependency loop.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all "blkcipher" algorithms have been converted to "skcipher",
remove the blkcipher algorithm type.
The skcipher (symmetric key cipher) algorithm type was introduced a few
years ago to replace both blkcipher and ablkcipher (synchronous and
asynchronous block cipher). The advantages of skcipher include:
- A much less confusing name, since none of these algorithm types have
ever actually been for raw block ciphers, but rather for all
length-preserving encryption modes including block cipher modes of
operation, stream ciphers, and other length-preserving modes.
- It unified blkcipher and ablkcipher into a single algorithm type
which supports both synchronous and asynchronous implementations.
Note, blkcipher already operated only on scatterlists, so the fact
that skcipher does too isn't a regression in functionality.
- Better type safety by using struct skcipher_alg, struct
crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc.
- It sometimes simplifies the implementations of algorithms.
Also, the blkcipher API was no longer being tested.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch brings support of several BLAKE2 variants (2b with various
digest lengths). The keyed digest is supported, using tfm->setkey call.
The in-tree user will be btrfs (for checksumming), we're going to use
the BLAKE2b-256 variant.
The code is reference implementation taken from the official sources and
modified in terms of kernel coding style (whitespace, comments, uintXX_t
-> uXX types, removed unused prototypes and #ifdefs, removed testing
code, changed secure_zero_memory -> memzero_explicit, used own helpers
for unaligned reads/writes and rotations).
Further changes removed sanity checks of key length or output size,
these values are verified in the crypto API callbacks or hardcoded in
shash_alg and not exposed to users.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The next version of Clang will start policing compiler command line
options, and will reject combinations of -march and -mfpu that it
thinks are incompatible.
This results in errors like
clang-10: warning: ignoring extension 'crypto' because the 'armv7-a'
architecture does not support it [-Winvalid-command-line-argument]
/tmp/aegis128-neon-inner-5ee428.s: Assembler messages:
/tmp/aegis128-neon-inner-5ee428.s:73: Error: selected
processor does not support `aese.8 q2,q14' in ARM mode
when buiding the SIMD aegis128 code for 32-bit ARM, given that the
'armv7-a' -march argument is considered to be compatible with the
ARM crypto extensions. Instead, we should use armv8-a, which does
allow the crypto extensions to be enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
implementation details that do not belong in DM crypt. The wrapper
template for ESSIV generation that was factored out will also be used
by fscrypt in the future.
- Add root hash pkcs#7 signature verification to the DM verity target.
- Add a new "clone" DM target that allows for efficient remote
replication of a device.
- Enhance DM bufio's cache to be tailored to each client based on use.
Clients that make heavy use of the cache get more of it, and those
that use less have reduced cache usage.
- Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the
version number of a DM target (even if the associated module isn't yet
loaded).
- Fix invalid memory access in DM zoned target.
- Fix the max_discard_sectors limit advertised by the DM raid target; it
was mistakenly storing the limit in bytes rather than sectors.
- Small optimizations and cleanups in DM writecache target.
- Various fixes and cleanups in DM core, DM raid1 and space map portion
of DM persistent data library.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl2D7ycTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWp9QCACwTkVGzPGMCbAaCVlCACo8B5JyY4OO
FNxucqUlt1MHKuBbzJd4XwNGlLg68xjMUKVPYPlgina7TaDl+wvlTbHchaJS8nak
x1zyhDSywy0F9f6HHiXJi/vshmAfa0xnIM6fQXVPM346S6xf9u7hqOJQMCrdvY92
w4FhuW9nVt5xizo8iC/3LzoWbhrWncT7dyZUZtG3/tmglhkEK7QwctlgQxcD7tXg
H1lhntQzHzpxQAVBefWWdw7ubuDd6XCHuQMaxRhyR++c62P3eKDR8ck9hhd3hZKv
E481gtxcsjKuYLxwULjqFJZaNFitWFNMJ7gppQyKRqCzn2zlGAL6npl8
=m6zD
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- crypto and DM crypt advances that allow the crypto API to reclaim
implementation details that do not belong in DM crypt. The wrapper
template for ESSIV generation that was factored out will also be used
by fscrypt in the future.
- Add root hash pkcs#7 signature verification to the DM verity target.
- Add a new "clone" DM target that allows for efficient remote
replication of a device.
- Enhance DM bufio's cache to be tailored to each client based on use.
Clients that make heavy use of the cache get more of it, and those
that use less have reduced cache usage.
- Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the
version number of a DM target (even if the associated module isn't
yet loaded).
- Fix invalid memory access in DM zoned target.
- Fix the max_discard_sectors limit advertised by the DM raid target;
it was mistakenly storing the limit in bytes rather than sectors.
- Small optimizations and cleanups in DM writecache target.
- Various fixes and cleanups in DM core, DM raid1 and space map portion
of DM persistent data library.
* tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
dm: introduce DM_GET_TARGET_VERSION
dm bufio: introduce a global cache replacement
dm bufio: remove old-style buffer cleanup
dm bufio: introduce a global queue
dm bufio: refactor adjust_total_allocated
dm bufio: call adjust_total_allocated from __link_buffer and __unlink_buffer
dm: add clone target
dm raid: fix updating of max_discard_sectors limit
dm writecache: skip writecache_wait for pmem mode
dm stats: use struct_size() helper
dm crypt: omit parsing of the encapsulated cipher
dm crypt: switch to ESSIV crypto API template
crypto: essiv - create wrapper template for ESSIV generation
dm space map common: remove check for impossible sm_find_free() return value
dm raid1: use struct_size() with kzalloc()
dm writecache: optimize performance by sorting the blocks for writeback_all
dm writecache: add unlikely for getting two block with same LBA
dm writecache: remove unused member pointer in writeback_struct
dm zoned: fix invalid memory access
dm verity: add root hash pkcs#7 signature verification
...
Implement a template that wraps a (skcipher,shash) or (aead,shash) tuple
so that we can consolidate the ESSIV handling in fscrypt and dm-crypt and
move it into the crypto API. This will result in better test coverage, and
will allow future changes to make the bare cipher interface internal to the
crypto subsystem, in order to increase robustness of the API against misuse.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Provide a version of the core AES transform to the aegis128 SIMD
code that does not rely on the special AES instructions, but uses
plain NEON instructions instead. This allows the SIMD version of
the aegis128 driver to be used on arm64 systems that do not
implement those instructions (which are not mandatory in the
architecture), such as the Raspberry Pi 3.
Since GCC makes a mess of this when using the tbl/tbx intrinsics
to perform the sbox substitution, preload the Sbox into v16..v31
in this case and use inline asm to emit the tbl/tbx instructions.
Clang does not support this approach, nor does it require it, since
it does a much better job at code generation, so there we use the
intrinsics as usual.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an accelerated implementation of aegis128 by wiring up the
SIMD hooks in the generic driver to an implementation based on NEON
intrinsics, which can be compiled to both ARM and arm64 code.
This results in a performance of 2.2 cycles per byte on Cortex-A53,
which is a performance increase of ~11x compared to the generic
code.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add some plumbing to allow the AEGIS128 code to be built with SIMD
routines for acceleration.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Recent clang-9 snapshots double the kernel stack usage when building
this file with -O0 -fsanitize=kernel-hwaddress, compared to clang-8
and older snapshots, this changed between commits svn364966 and
svn366056:
crypto/jitterentropy.c:516:5: error: stack frame size of 2640 bytes in function 'jent_entropy_init' [-Werror,-Wframe-larger-than=]
int jent_entropy_init(void)
^
crypto/jitterentropy.c:185:14: error: stack frame size of 2224 bytes in function 'jent_lfsr_time' [-Werror,-Wframe-larger-than=]
static __u64 jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt)
^
I prepared a reduced test case in case any clang developers want to
take a closer look, but from looking at the earlier output it seems
that even with clang-8, something was very wrong here.
Turn off any KASAN and UBSAN sanitizing for this file, as that likely
clashes with -O0 anyway. Turning off just KASAN avoids the warning
already, but I suspect both of these have undesired side-effects
for jitterentropy.
Link: https://godbolt.org/z/fDcwZ5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit ecc8bc81f2
("crypto: aegis128 - provide a SIMD implementation based on NEON
intrinsics") and commit 7cdc0ddbf7
("crypto: aegis128 - add support for SIMD acceleration").
They cause compile errors on platforms other than ARM because
the mechanism to selectively compile the SIMD code is broken.
Repoted-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an accelerated implementation of aegis128 by wiring up the
SIMD hooks in the generic driver to an implementation based on NEON
intrinsics, which can be compiled to both ARM and arm64 code.
This results in a performance of 2.2 cycles per byte on Cortex-A53,
which is a performance increase of ~11x compared to the generic
code.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add some plumbing to allow the AEGIS128 code to be built with SIMD
routines for acceleration.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Three variants of AEGIS were proposed for the CAESAR competition, and
only one was selected for the final portfolio: AEGIS128.
The other variants, AEGIS128L and AEGIS256, are not likely to ever turn
up in networking protocols or other places where interoperability
between Linux and other systems is a concern, nor are they likely to
be subjected to further cryptanalysis. However, uninformed users may
think that AEGIS128L (which is faster) is equally fit for use.
So let's remove them now, before anyone starts using them and we are
forced to support them forever.
Note that there are no known flaws in the algorithms or in any of these
implementations, but they have simply outlived their usefulness.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MORUS was not selected as a winner in the CAESAR competition, which
is not surprising since it is considered to be cryptographically
broken [0]. (Note that this is not an implementation defect, but a
flaw in the underlying algorithm). Since it is unlikely to be in use
currently, let's remove it before we're stuck with it.
[0] https://eprint.iacr.org/2019/172.pdf
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
xxhash is currently implemented as a self-contained module in /lib.
This patch enables that module to be used as part of the generic kernel
crypto framework. It adds a simple wrapper to the 64bit version.
I've also added test vectors (with help from Nick Terrell). The upstream
xxhash code is tested by running hashing operation on random 222 byte
data with seed values of 0 and a prime number. The upstream test
suite can be found at https://github.com/Cyan4973/xxHash/blob/cf46e0c/xxhsum.c#L664
Essentially hashing is run on data of length 0,1,14,222 with the
aforementioned seed values 0 and prime 2654435761. The particular random
222 byte string was provided to me by Nick Terrell by reading
/dev/random and the checksums were calculated by the upstream xxsum
utility with the following bash script:
dd if=/dev/random of=TEST_VECTOR bs=1 count=222
for a in 0 1; do
for l in 0 1 14 222; do
for s in 0 2654435761; do
echo algo $a length $l seed $s;
head -c $l TEST_VECTOR | ~/projects/kernel/xxHash/xxhsum -H$a -s$s
done
done
done
This produces output as follows:
algo 0 length 0 seed 0
02cc5d05 stdin
algo 0 length 0 seed 2654435761
02cc5d05 stdin
algo 0 length 1 seed 0
25201171 stdin
algo 0 length 1 seed 2654435761
25201171 stdin
algo 0 length 14 seed 0
c1d95975 stdin
algo 0 length 14 seed 2654435761
c1d95975 stdin
algo 0 length 222 seed 0
b38662a6 stdin
algo 0 length 222 seed 2654435761
b38662a6 stdin
algo 1 length 0 seed 0
ef46db3751d8e999 stdin
algo 1 length 0 seed 2654435761
ac75fda2929b17ef stdin
algo 1 length 1 seed 0
27c3f04c2881203a stdin
algo 1 length 1 seed 2654435761
4a15ed26415dfe4d stdin
algo 1 length 14 seed 0
3d33dc700231dfad stdin
algo 1 length 14 seed 2654435761
ea5f7ddef9a64f80 stdin
algo 1 length 222 seed 0
5f3d3c08ec2bef34 stdin
algo 1 length 222 seed 2654435761
6a9df59664c7ed62 stdin
algo 1 is xx64 variant, algo 0 is the 32 bit variant which is currently
not hooked up.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kcrypto_wq is only used by cryptd, so move it into cryptd.c and change
the workqueue name from "crypto" to "cryptd".
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
