master
625 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mario Limonciello
|
b79276dcac |
ACPI: processor: Move arch_init_invariance_cppc() call later
arch_init_invariance_cppc() is called at the end of acpi_cppc_processor_probe() in order to configure frequency invariance based upon the values from _CPC. This however doesn't work on AMD CPPC shared memory designs that have AMD preferred cores enabled because _CPC needs to be analyzed from all cores to judge if preferred cores are enabled. This issue manifests to users as a warning since commit |
||
|
Linus Torvalds
|
19a519ca87 |
xen: branch for v6.12-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZuu+BAAKCRCAXGG7T9hj vs3bAP4mp0NnxnDbvPObWoPKmLk5OvHdfY9cV+/M+r/UObfyswD+OYaZH0hVCHP6 L96RzSHE+Q1pKPNpQfMOPcCDFmO3wwI= =cN0H -----END PGP SIGNATURE----- Merge tag 'for-linus-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - fix a boot problem as a Xen dom0 on some AMD systems - fix Xen PVH boot problems with KASAN enabled - fix for a build warning - fixes to swiotlb-xen * tag 'for-linus-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/swiotlb: fix allocated size xen/swiotlb: add alignment check for dma buffers xen/pci: Avoid -Wflex-array-member-not-at-end warning xen/xenbus: Convert to use ERR_CAST() xen, pvh: fix unbootable VMs by inlining memset() in xen_prepare_pvh() x86/cpu: fix unbootable VMs by inlining memcmp() in hypervisor_cpuid_base() xen, pvh: fix unbootable VMs (PVH + KASAN - AMD_MEM_ENCRYPT) xen: tolerate ACPI NVS memory overlapping with Xen allocated memory xen: allow mapping ACPI data using a different physical address xen: add capability to remap non-RAM pages to different PFNs xen: move max_pfn in xen_memory_setup() out of function scope xen: move checks for e820 conflicts further up xen: introduce generic helper checking for memory map conflicts xen: use correct end address of kernel for conflict checking |
||
|
Juergen Gross
|
9221222c71 |
xen: allow mapping ACPI data using a different physical address
When running as a Xen PV dom0 the system needs to map ACPI data of the host using host physical addresses, while those addresses can conflict with the guest physical addresses of the loaded linux kernel. The same problem might apply in case a PV guest is configured to use the host memory map. This conflict can be solved by mapping the ACPI data to a different guest physical address, but mapping the data via acpi_os_ioremap() must still be possible using the host physical address, as this address might be generated by AML when referencing some of the ACPI data. When configured to support running as a Xen PV domain, have an implementation of acpi_os_ioremap() being aware of the possibility to need above mentioned translation of a host physical address to the guest physical address. This modification requires to #include linux/acpi.h in some sources which need to include asm/acpi.h directly. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Rafael J. Wysocki
|
9bcf30348f |
second round of amd-pstate changes for 6.12 (second try):
* Move the calculation of the AMD boost numerator outside of amd-pstate, correcting acpi-cpufreq on systems with preferred cores * Harden preferred core detection to avoid potential false positives * Add extra unit test coverage for mode state machine -----BEGIN PGP SIGNATURE----- iQJOBAABCgA4FiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmbhviEaHG1hcmlvLmxp bW9uY2llbGxvQGFtZC5jb20ACgkQLRkspiR3AnYqDA//TrvmXcpk1mnVJw3Y7MG0 /n8dsLpxqVtEf+USnlGR+iRhgSQ/W/Kr7b5a+jmdCwpHChuWHt2FnNgcHLIxDnZC vmEJ02/2BCRoPKvcvV4VTh0ATu3O9nqwQiBVWBdNjDy+Dzr0pzA+SQopt1hCIsO2 mzUodhpiBqYKlMf/i6+aM1gZCGGqoRC40aGqnJsgegb61vl7zIc2ZcbTxUQlyTfv t6J73IXLx8+YtrjejBYc7mRHhMQ2hCKy92C/8cNoGocj5faSKsAA3OUDcWq8qX0U zK3GGGdW8MLHSbt3VyntstnfiLL7TnzowcjvrMudIWpjC1987GlE9BApbN9VRZ8e ARN3Y7/ltjut/1fRB97BwjI9aDpzA0122Qzy4UOcK8o+be1eIr+ihV3Z9EN/snWg 0L/oq5+rGHvvIzf1BwGhoPSvgBIu7eMIYDcRxKPlEiKsbXrL4DdJC/nXgaZ/HiGO eHx1dNy7LFrdnEwVI1frZWC6ZuZcpmOBdhnfU+leVxzB3Z++Qc266rsxKBsc5taZ PPV18pxfbbl3iL85KDIbuBUCmA0aY8WEdCKtfXpl7zlB5g0fZQLyYeUbvahK08Sk vyQAnPECbX/4v1Vx54Z70GPk0XD2+TXdg8yApnXrmRc36z/SLdprk5hPKbKhZu/r iPxFUnvd0HCtjsLrsq/qUiQ= =R4HZ -----END PGP SIGNATURE----- Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Merge the second round of amd-pstate changes for 6.12 from Mario Limonciello: "* Move the calculation of the AMD boost numerator outside of amd-pstate, correcting acpi-cpufreq on systems with preferred cores * Harden preferred core detection to avoid potential false positives * Add extra unit test coverage for mode state machine" * tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue cpufreq/amd-pstate-ut: Add test case for mode switches cpufreq/amd-pstate: Export symbols for changing modes amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking` cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore` cpufreq: amd-pstate: Optimize amd_pstate_update_limits() cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator() x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator() x86/amd: Move amd_get_highest_perf() out of amd-pstate ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn ACPI: CPPC: Drop check for non zero perf ratio x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator() ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c |
||
|
Mario Limonciello
|
ad4caad58d |
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
The special case in amd_pstate_highest_perf_set() is the value used for calculating the boost numerator. Merge this into amd_get_boost_ratio_numerator() and then use that to calculate boost ratio. This allows dropping more special casing of the highest perf value. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Mario Limonciello
|
279f838a61 |
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
AMD systems that support preferred cores will use "166" as their numerator for max frequency calculations instead of "255". Add a function for detecting preferred cores by looking at the highest perf value on all cores. If preferred cores are enabled return 166 and if disabled the value in the highest perf register. As the function will be called multiple times, cache the values for the boost numerator and if preferred cores will be enabled in global variables. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Mario Limonciello
|
2819bfef64 |
x86/amd: Move amd_get_highest_perf() out of amd-pstate
amd_pstate_get_highest_perf() is a helper used to get the highest perf value on AMD systems. It's used in amd-pstate as part of preferred core handling, but applicable for acpi-cpufreq as well. Move it out to cppc handling code as amd_get_highest_perf(). Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Mario Limonciello
|
21fb59ab4b |
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
If the boost ratio isn't calculated properly for the system for any reason this can cause other problems that are non-obvious. Raise all messages to warn instead. Suggested-by: Perry Yuan <Perry.Yuan@amd.com> Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Mario Limonciello
|
3355ac2541 |
ACPI: CPPC: Drop check for non zero perf ratio
perf_ratio is a u64 and SCHED_CAPACITY_SCALE is a large number. Shifting by one will never have a zero value. Drop the check. Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.sheoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Mario Limonciello
|
6c09e3b445 |
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
The function name is ambiguous because it returns an intermediate value for calculating maximum frequency rather than the CPPC 'Highest Perf' register. Rename the function to clarify its use and allow the function to return errors. Adjust the consumer in acpi-cpufreq to catch errors. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Mario Limonciello
|
2bcec09cc4 |
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
To prepare to let amd_get_highest_perf() detect preferred cores it will require CPPC functions. Move amd_get_highest_perf() to cppc.c to prepare for 'preferred core detection' rework. No functional changes intended. Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Zhiquan Li
|
ab84ba647f |
x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
On a platform using the "Multiprocessor Wakeup Structure"[1] to startup
secondary CPUs the control processor needs to memremap() the physical
address of the MP Wakeup Structure mailbox to the variable
acpi_mp_wake_mailbox, which holds the virtual address of mailbox.
To wake up the AP the control processor writes the APIC ID of AP, the
wakeup vector and the ACPI_MP_WAKE_COMMAND_WAKEUP command into the mailbox.
Current implementation doesn't consider the case which restricts boot time
CPU bringup to 1 with the kernel parameter "maxcpus=1" and brings other
CPUs online later from user space as it sets acpi_mp_wake_mailbox to
read-only after init. So when the first AP is tried to brought online
after init, the attempt to update the variable results in a kernel panic.
The memremap() call that initializes the variable cannot be moved into
acpi_parse_mp_wake() because memremap() is not functional at that point in
the boot process. Also as the APs might never be brought up, keep the
memremap() call in acpi_wakeup_cpu() so that the operation only takes place
when needed.
Fixes:
|
||
|
Kirill A. Shutemov
|
1ceebe2e46 |
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
MADT Multiprocessor Wakeup structure version 1 brings support for CPU offlining: BIOS provides a reset vector where the CPU has to jump to for offlining itself. The new TEST mailbox command can be used to test whether the CPU offlined itself which means the BIOS has control over the CPU and can online it again via the ACPI MADT wakeup method. Add CPU offlining support for the ACPI MADT wakeup method by implementing custom cpu_die(), play_dead() and stop_this_cpu() SMP operations. CPU offlining makes it possible to hand over secondary CPUs over kexec, not limiting the second kernel to a single CPU. The change conforms to the approved ACPI spec change proposal. See the Link. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kai Huang <kai.huang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Tao Liu <ltao@redhat.com> Link: https://lore.kernel.org/all/13356251.uLZWGnKmhe@kreacher Link: https://lore.kernel.org/r/20240614095904.1345461-19-kirill.shutemov@linux.intel.com |
||
|
Kirill A. Shutemov
|
db0936830a |
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
ACPI MADT doesn't allow to offline a CPU after it was onlined. This limits kexec: the second kernel won't be able to use more than one CPU. To prevent a kexec kernel from onlining secondary CPUs, invalidate the mailbox address in the ACPI MADT wakeup structure which prevents a kexec kernel to use it. This is safe as the booting kernel has the mailbox address cached already and acpi_wakeup_cpu() uses the cached value to bring up the secondary CPUs. Note: This is a Linux specific convention and not covered by the ACPI specification. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Tao Liu <ltao@redhat.com> Link: https://lore.kernel.org/r/20240614095904.1345461-16-kirill.shutemov@linux.intel.com |
||
|
Kirill A. Shutemov
|
6630cbce7c |
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
In order to support MADT wakeup structure version 1, provide more appropriate names for the fields in the structure. Rename 'mailbox_version' to 'version'. This field signifies the version of the structure and the related protocols, rather than the version of the mailbox. This field has not been utilized in the code thus far. Rename 'base_address' to 'mailbox_address' to clarify the kind of address it represents. In version 1, the structure includes the reset vector address. Clear and distinct naming helps to prevent any confusion. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Tao Liu <ltao@redhat.com> Link: https://lore.kernel.org/r/20240614095904.1345461-15-kirill.shutemov@linux.intel.com |
||
|
Kirill A. Shutemov
|
66e48e491d |
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
ACPI MADT doesn't allow to offline a CPU after it has been woken up. Currently, CPU hotplug is prevented based on the confidential computing attribute which is set for Intel TDX. But TDX is not the only possible user of the wake up method. Any platform that uses ACPI MADT wakeup method cannot offline CPU. Disable CPU offlining on ACPI MADT wakeup enumeration. This has no visible effects for users: currently, TDX guest is the only platform that uses the ACPI MADT wakeup method. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Tao Liu <ltao@redhat.com> Link: https://lore.kernel.org/r/20240614095904.1345461-5-kirill.shutemov@linux.intel.com |
||
|
Kirill A. Shutemov
|
24dd05da8c |
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
acpi_mp_wake_mailbox_paddr and acpi_mp_wake_mailbox are initialized once during ACPI MADT init and never changed. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Baoquan He <bhe@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kai Huang <kai.huang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Tao Liu <ltao@redhat.com> Link: https://lore.kernel.org/r/20240614095904.1345461-3-kirill.shutemov@linux.intel.com |
||
|
Kirill A. Shutemov
|
2b5e22afae |
x86/acpi: Extract ACPI MADT wakeup code into a separate file
In order to prepare for the expansion of support for the ACPI MADT wakeup method, move the relevant code into a separate file. Introduce a new configuration option to clearly indicate dependencies without the use of ifdefs. There have been no functional changes. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Baoquan He <bhe@redhat.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Kai Huang <kai.huang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Tao Liu <ltao@redhat.com> Link: https://lore.kernel.org/r/20240614095904.1345461-2-kirill.shutemov@linux.intel.com |
||
|
Linus Torvalds
|
9434467959 |
ACPI updates for 6.9-rc1
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki).
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki).
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki).
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu).
- Constify acpi_bus_type (Ricardo Marliere).
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki).
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye).
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf).
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus).
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King).
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede).
- Make the ACPI backlight code handle fetching EDID that is longer than
256 bytes (Mario Limonciello).
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik).
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König).
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki).
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath).
- Fix register width information handling during system memory
accesses in the ACPI CPPC library (Jarred White).
- Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
library (Perry Yuan).
-----BEGIN PGP SIGNATURE-----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=Yngi
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These modify the ACPI device events and processor enumeration code to
take the 'enabled' _STA bit into account as mandated by the ACPI
specification, convert several platform drivers to using a remove
callback that returns void, add some new quirks for ACPI IRQ override
and other things, address assorted issues and clean up code.
Specifics:
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki)
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki)
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki)
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu)
- Constify acpi_bus_type (Ricardo Marliere)
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki)
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye)
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf)
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus)
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King)
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede)
- Make the ACPI backlight code handle fetching EDID that is longer
than 256 bytes (Mario Limonciello)
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik)
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König)
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki)
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath)
- Fix register width information handling during system memory
accesses in the ACPI CPPC library (Jarred White)
- Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
library (Perry Yuan)"
* tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
ACPI: resource: Use IRQ override on Maibenben X565
ACPI: CPPC: Use access_width over bit_width for system memory accesses
ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: scan: Consolidate Device Check and Bus Check notification handling
ACPI: scan: Rework Device Check and Bus Check notification handling
ACPI: scan: Make acpi_processor_add() check the device enabled bit
ACPI: scan: Relocate acpi_bus_trim_one()
ACPI: scan: Fix device check notification handling
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: APEI: GHES: Convert to platform remove callback returning void
ACPI: property: Polish ignoring bad data nodes
ACPI: thermal_lib: Initialize temp_decik to zero
...
|
||
|
Linus Torvalds
|
07abb19a9b |
Power management updates for 6.9-rc1
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
- Fix a couple of warnings in the OPP core code related to W=1
builds (Viresh Kumar).
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg).
-----BEGIN PGP SIGNATURE-----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=UePT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
||
|
Linus Torvalds
|
685d982112 |
Core x86 changes for v6.9:
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
||
|
He Rongguang
|
6b8e288f49 |
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
According to x86 spec ([1] and [2]), MWAIT hint_address[7:4] plus 1 is the corresponding C-state, and 0xF means C0. ACPI C-state table usually only contains C1+, but nothing prevents ACPI firmware from presenting a C-state (maybe C1+) but using MWAIT address C0 (i.e., 0xF in ACPI FFH MWAIT hint address). And if this is the case, Linux erroneously treat this cstate as C16, while actually this should be valid C0 instead of C16, as per the specifications. Since ACPI firmware is out of Linux kernel scope, fix the kernel handling of 0xF ->(to) C0 in this situation. This is found when a tweaked ACPI C-state table is presented by Qemu to VM. Also modify the intel_idle case for code consistency. [1]. Intel SDM Vol 2, Table 4-11. MWAIT Hints Register (EAX): "Value of 0 means C1; 1 means C2 and so on Value of 01111B means C0". [2]. AMD manual Vol 3, MWAIT: "The processor C-state is EAX[7:4]+1, so to request C0 is to place the value F in EAX[7:4] and to request C1 is to place the value 0 in EAX[7:4].". Signed-off-by: He Rongguang <herongguang@linux.alibaba.com> [ rjw: Subject and changelog edits, whitespace fixups ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Perry Yuan
|
a51ab63b29 |
ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
As there are some AMD processors which only support CPPC V2 firmware and
BIOS implementation, the amd_pstate driver will be failed to load when
system booting with below kernel warning message:
[ 0.477523] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
To make the amd_pstate driver can be loaded on those TR40 processors, it
needs to match x86_model from 0x30 to 0x7F for family 17H.
With the change, the system can load amd_pstate driver as expected.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Gino Badouri <badouri.g@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218171
Fixes:
|
||
|
Thomas Gleixner
|
354da4cf57 |
x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
It turns out that XEN/PV Dom0 has halfways usable CPUID/MADT enumeration
except that it cannot deal with CPUs which are enumerated as disabled in
MADT.
DomU has no MADT and provides at least rudimentary topology information in
CPUID leaves 1 and 4.
For both it's important that there are not more possible Linux CPUs than
vCPUs provided by the hypervisor.
As this is ensured by counting the vCPUs before enumeration happens:
- lift the restrictions in the CPUID evaluation and the MADT parser
- Utilize MADT registration for Dom0
- Keep the fake APIC ID registration for DomU
- Fix the XEN APIC fake so the readout of the local APIC ID works for
Dom0 via the hypercall and for DomU by returning the registered
fake APIC IDs.
With that the XEN/PV fake approximates usefulness.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.626195405@linutronix.de
|
||
|
Thomas Gleixner
|
cab8e164a4 |
x86/acpi: Dont invoke topology_register_apic() for XEN PV
The MADT table for XEN/PV dom0 is not really useful and registering the APICs is momentarily a pointless exercise because XENPV does not use an APIC at all. It overrides the x86_init.mpparse.parse_smp_config() callback, resets num_processors and counts how many of them are provided by the hypervisor. This is in the way of cleaning up the APIC registration. Prevent MADT registration for XEN/PV temporarily until the rework is completed and XEN/PV can use the MADT again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20240213210251.885489468@linutronix.de |
||
|
Thomas Gleixner
|
ff37b09c84 |
x86/acpi: Use new APIC registration functions
Use the new topology registration functions and make the early boot code path __init. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20240213210251.664738831@linutronix.de |
||
|
Ingo Molnar
|
03c11eb3b1 |
Linux 6.8-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXJK4UeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHsYH/jKmzKXDRsBCcw/Q HGUvFtpohWBOpN6efdf0nxilQisuyQrqKB9fnwvfcdE60VpqMJXFMdlFh/fonxPl JMbpk9y5uw48IJZA43NwTxUrjZ4wyWzv4ZF6YWa+5WdTAJpPLEPhhnLxcHOKklMr 5Cm/7B/M7eB2BXBfc45b1pkKN22q9OXvjaKxZ+5wYmiMxS+GC8l8jiJ/WlHX78PR eLgsa1v732f2D7YF75wVhaoYepR+QzA9wTKqhjMNCEaVc2PQhA2JRsBXEt84qEIa FZigmf7LLc4ed9YA2XjRBZhAehe3cZVJZ1lasW37IATS921La2WfKuiysICJOtyT bGjK8tk= =Pt7W -----END PGP SIGNATURE----- Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch Conflicts: arch/x86/include/asm/percpu.h arch/x86/include/asm/text-patching.h Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Thomas Gleixner
|
d5a10b976e |
x86/acpi: Handle bogus MADT APIC tables gracefully
The recent fix to ignore invalid x2APIC entries inadvertently broke
systems with creative MADT APIC tables. The affected systems have APIC
MADT tables where all entries have invalid APIC IDs (0xFF), which means
they register exactly zero CPUs.
But the condition to ignore the entries of APIC IDs < 255 in the X2APIC
MADT table is solely based on the count of MADT APIC table entries.
As a consequence, the affected machines enumerate no secondary CPUs at
all because the APIC table has entries and therefore the X2APIC table
entries with APIC IDs < 255 are ignored.
Change the condition so that the APIC table preference for APIC IDs <
255 only becomes effective when the APIC table has valid APIC ID
entries.
IOW, an APIC table full of invalid APIC IDs is considered to be empty
which in consequence enables the X2APIC table entries with a APIC ID
< 255 and restores the expected behaviour.
Fixes:
|
||
|
Uros Bizjak
|
0978d64f94 |
x86/acpi: Use %rip-relative addressing in wakeup_64.S
This is a "nice-to-have" change with minor code generation benefits: - Instruction with %rip-relative address operand is one byte shorter than its absolute address counterpart, - it is also compatible with position independent executable (-fpie) builds, - it is also consistent with what the compiler emits by default when a symbol is accessed. No functional changes intended. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20231103104900.409470-1-ubizjak@gmail.com |
||
|
Linus Torvalds
|
cd557bc0a2 |
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in use - A documentation fix - Add Kirill as TDX maintainer -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmVaChkACgkQEsHwGGHe VUraNQ/+KyCyJgG6bdIB3tS9qKr0Z4REaXQ+UQ7DfAjlhrzw7C6f4VReNLp3ohEv RdxNjKLEueYFQAo+v8uKGkqYIT6H1ob9uW+RjtjN+OJqWN/3AfK7CTx8HI1bJsW5 wKM+Ey81cID0iQDiNPAdzRnu7suKKjF5jLwztAw6EYOsTRfUnLZ8Ct84uHBWd58v kZ+WkEyeOyeJo+Vdx07d/LEcCJ+S9G6WfA0AnhHPOZxRZTn2RhqNsnJvqTeOvWUM PSN9NjxFk0ymidwnhR1urw1wHGgTT990vNsPIHLE72TwXrWEOM14Xkq1XNI4PfD1 Bp74ySpF0YUQrvgBW4V3qXgBFls4DkKys1amd2kK5KQGEpcXZm7ZPnI5w2NKMsY4 1Tk379W/1jPY8cyZjIqn92eFEkAjfID4eHICLj5IJhVMUusNEPmxgoycvKDqI8sK NihF1wUjyfRibh4ujYaurqKUBgxVHo2dyXPPo7UNzeaMfvqkFaxgwNJVF0gQ+MyI 5BzeY71RCFb8ZKtCT6SVN6oUeWLg+QAZApoJVDDnhF9InG+wJj+D400T7pZnNHbo ag6L2gJFJ2+XsV8DJhiaII0gfbf9cUppn4G7RcvQfL2HivYnZV3q1dBKf6C35H44 Kpz5w/eoJPOIcuZ48a6ph80zuRpuN6MSBigZ0G2Q7IwrmFx1Vcg= =PGYO -----END PGP SIGNATURE----- Merge tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Ignore invalid x2APIC entries in order to not waste per-CPU data - Fix a back-to-back signals handling scenario when shadow stack is in use - A documentation fix - Add Kirill as TDX maintainer * tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/acpi: Ignore invalid x2APIC entries x86/shstk: Delay signal entry SSP write until after user accesses x86/Documentation: Indent 'note::' directive for protocol version number note MAINTAINERS: Add Intel TDX entry |
||
|
Zhang Rui
|
ec9aedb2aa |
x86/acpi: Ignore invalid x2APIC entries
Currently, the kernel enumerates the possible CPUs by parsing both ACPI MADT Local APIC entries and x2APIC entries. So CPUs with "valid" APIC IDs, even if they have duplicated APIC IDs in Local APIC and x2APIC, are always enumerated. Below is what ACPI MADT Local APIC and x2APIC describes on an Ivebridge-EP system, [02Ch 0044 1] Subtable Type : 00 [Processor Local APIC] [02Fh 0047 1] Local Apic ID : 00 ... [164h 0356 1] Subtable Type : 00 [Processor Local APIC] [167h 0359 1] Local Apic ID : 39 [16Ch 0364 1] Subtable Type : 00 [Processor Local APIC] [16Fh 0367 1] Local Apic ID : FF ... [3ECh 1004 1] Subtable Type : 09 [Processor Local x2APIC] [3F0h 1008 4] Processor x2Apic ID : 00000000 ... [B5Ch 2908 1] Subtable Type : 09 [Processor Local x2APIC] [B60h 2912 4] Processor x2Apic ID : 00000077 As a result, kernel shows "smpboot: Allowing 168 CPUs, 120 hotplug CPUs". And this wastes significant amount of memory for the per-cpu data. Plus this also breaks https://lore.kernel.org/all/87edm36qqb.ffs@tglx/, because __max_logical_packages is over-estimated by the APIC IDs in the x2APIC entries. According to https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-local-x2apic-structure: "[Compatibility note] On some legacy OSes, Logical processors with APIC ID values less than 255 (whether in XAPIC or X2APIC mode) must use the Processor Local APIC structure to convey their APIC information to OSPM, and those processors must be declared in the DSDT using the Processor() keyword. Logical processors with APIC ID values 255 and greater must use the Processor Local x2APIC structure and be declared using the Device() keyword." Therefore prevent the registration of x2APIC entries with an APIC ID less than 255 if the local APIC table enumerates valid APIC IDs. [ tglx: Simplify the logic ] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230702162802.344176-1-rui.zhang@intel.com |
||
|
Linus Torvalds
|
eb55307e67 |
X86 core code updates:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have a
model ID less than 4. The newer models have the topology CPUID leaf 0xB
correctly implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By chance
a XEN/PV boot ends up with smp_num_siblings == 2, which makes the
hotplug control stay at its default value "enabled". So the mask is
never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core to
deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or even
non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned long
or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die
IDs. That's really not the right place simply because cpuinfo is
subject to be reinitialized when a CPU goes through an offline/online
cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
-----BEGIN PGP SIGNATURE-----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=xrz8
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
|
||
|
Thomas Gleixner
|
128b0c9781 |
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes:
|
||
|
Thomas Gleixner
|
db4a4086a2 |
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
APIC IDs are used with random data types u16, u32, int, unsigned int, unsigned long. Make it all consistently use u32 because that reflects the hardware register width. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de |
||
|
Thomas Gleixner
|
9ff4275bc8 |
x86/apic: Use BAD_APICID consistently
APIC ID checks compare with BAD_APICID all over the place, but some initializers and some code which fiddles with global data structure use -1[U] instead. That simply cannot work at all. Fix it up and use BAD_APICID consistently all over the place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.862835121@linutronix.de |
||
|
Linus Torvalds
|
1687d8aca5 |
* Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
* Use static_calls() instead of indirect calls for apic->foo()
* Tons of cleanups an crap removal along the way
-----BEGIN PGP SIGNATURE-----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=eoKm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
|
||
|
Hans de Goede
|
c6a1fd910d |
ACPI: resource: Honor MADT INT_SRC_OVR settings for IRQ1 on AMD Zen
On AMD Zen acpi_dev_irq_override() by default prefers the DSDT IRQ 1
settings over the MADT settings.
This causes the keyboard to malfunction on some laptop models
(see Links), all models from the Links have an INT_SRC_OVR MADT entry
for IRQ 1.
Fixes:
|
||
|
Thomas Gleixner
|
2744a7ce34 |
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
Switch them over to apic_update_callback() and remove the code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) |
||
|
Thomas Gleixner
|
9132d720eb |
x86/apic: Wrap APIC ID validation into an inline
Prepare for removing the callback and making this as simple comparison to an upper limit, which is the obvious solution to do for limit checks... Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) |
||
|
Thomas Gleixner
|
249ada2c82 |
x86/apic: Remove the pointless APIC version check
This historical leftover is really uninteresting today. Whatever MPTABLE or MADT delivers we only trust the hardware anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) |
||
|
Thomas Gleixner
|
ecf600f894 |
x86/apic/ioapic: Rename skip_ioapic_setup
Another variable name which is confusing at best. Convert to bool. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) |
||
|
Linus Torvalds
|
19300488c9 |
- Address -Wmissing-prototype warnings
- Remove repeated 'the' in comments - Remove unused current_untag_mask() - Document urgent tip branch timing - Clean up MSR kernel-doc notation - Clean up paravirt_ops doc - Update Srivatsa S. Bhat's maintained areas - Remove unused extern declaration acpi_copy_wakeup_routine() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmSZ6xIACgkQaDWVMHDJ krB9aQ/+NjB4CiWLbrnOYj9QYG6p1GE7lfu2dzIDdmcNuiai8htopXys54Igy3Rq BbIoW4E0SGK5E2OD7nLe4fBA/LpsYZTwDhGUu3SiovxLOoC5qkF0Q+6aVypPJE5o q7kn0Eo9IDL1dO0EbJptFDJRjk3K5caEoyXJRelarjIfPRbDEhUFaybVRykMZN9I 4AOxrlb9WFggT4gUE4+N0kWyEqdgI9/aguavmasaG4lBHZ5JAHNQPNIa8bkVSAPL wULAzsrGp96V3tVxdjDCzD9aumk4xlJq7gk+v7mfx013dg7Cjs074Xoi2Y+TmaC7 fdIZiGPJIkNToW+nENVO7BYtACSQhXeVTGxLQO/HNTDc//ZWiIUoJT2U4qu/6e6F aAIGoLwv68H4BghS2qx6Gz+BTIfl35mcPUb75MQhu+D84QZoZWrdamCYhsvHeZzc uC3nojrb6PBOth9nJsRae+j1zpRe/DT2LvHSWPJgK6EygOAi05ZfYUll/6sb0vze IXkUrVV1BvDDVpY9/HnE8RpDCDolP0/ezK9zsw48arZtkc+Qmw2WlD/2D98E+pSb MJPelbVmpzWTaoR4jDzXJCXkWe7CQJ5uPQj5azAE9l7YvnxgCQP5xnm5sLU9eyLu RsOwRzss0+3z44x5rJi9nSxQJ0LHfTAzW8/ZmNSZGHzi0ClszK0= =N82i -----END PGP SIGNATURE----- Merge tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Dave Hansen: "As usual, these are all over the map. The biggest cluster is work from Arnd to eliminate -Wmissing-prototype warnings: - Address -Wmissing-prototype warnings - Remove repeated 'the' in comments - Remove unused current_untag_mask() - Document urgent tip branch timing - Clean up MSR kernel-doc notation - Clean up paravirt_ops doc - Update Srivatsa S. Bhat's maintained areas - Remove unused extern declaration acpi_copy_wakeup_routine()" * tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine() Documentation: virt: Clean up paravirt_ops doc x86/mm: Remove unused current_untag_mask() x86/mm: Remove repeated word in comments x86/lib/msr: Clean up kernel-doc notation x86/platform: Avoid missing-prototype warnings for OLPC x86/mm: Add early_memremap_pgprot_adjust() prototype x86/usercopy: Include arch_wb_cache_pmem() declaration x86/vdso: Include vdso/processor.h x86/mce: Add copy_mc_fragile_handle_tail() prototype x86/fbdev: Include asm/fb.h as needed x86/hibernate: Declare global functions in suspend.h x86/entry: Add do_SYSENTER_32() prototype x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled() x86/mm: Include asm/numa.h for set_highmem_pages_init() x86: Avoid missing-prototype warnings for doublefault code x86/fpu: Include asm/fpu/regset.h x86: Add dummy prototype for mk_early_pgtbl_32() x86/pci: Mark local functions as 'static' x86/ftrace: Move prepare_ftrace_return prototype to header ... |
||
|
YueHaibing
|
b360cbd254 |
x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
This is now unused, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/20230620094519.15300-1-yuehaibing%40huawei.com |
||
|
David Woodhouse
|
7e75178a09 |
x86/smpboot: Support parallel startup of secondary CPUs
In parallel startup mode the APs are kicked alive by the control CPU quickly after each other and run through the early startup code in parallel. The real-mode startup code is already serialized with a bit-spinlock to protect the real-mode stack. In parallel startup mode the smpboot_control variable obviously cannot contain the Linux CPU number so the APs have to determine their Linux CPU number on their own. This is required to find the CPUs per CPU offset in order to find the idle task stack and other per CPU data. To achieve this, export the cpuid_to_apicid[] array so that each AP can find its own CPU number by searching therein based on its APIC ID. Introduce a flag in the top bits of smpboot_control which indicates that the AP should find its CPU number by reading the APIC ID from the APIC. This is required because CPUID based APIC ID retrieval can only provide the initial APIC ID, which might have been overruled by the firmware. Some AMD APUs come up with APIC ID = initial APIC ID + 0x10, so the APIC ID to CPU number lookup would fail miserably if based on CPUID. Also virtualization can make its own APIC ID assignements. The only requirement is that the APIC IDs are consistent with the APCI/MADT table. For the boot CPU or in case parallel bringup is disabled the control bits are empty and the CPU number is directly available in bit 0-23 of smpboot_control. [ tglx: Initial proof of concept patch with bitlock and APIC ID lookup ] [ dwmw2: Rework and testing, commit message, CPUID 0x1 and CPU0 support ] [ seanc: Fix stray override of initial_gs in common_cpu_up() ] [ Oleksandr Natalenko: reported suspend/resume issue fixed in x86_acpi_suspend_lowlevel ] [ tglx: Make it read the APIC ID from the APIC instead of using CPUID, split the bitlock part out ] Co-developed-by: Thomas Gleixner <tglx@linutronix.de> Co-developed-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Helge Deller <deller@gmx.de> # parisc Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/20230512205257.411554373@linutronix.de |
||
|
Linus Torvalds
|
de10553fce |
x86 APIC updates:
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the lower
bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as that
must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer interrupt
on x86. The return value is unchecked in the core code, so it ends up
to allocate interrupt number 0 which is subsequently considered to be
invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems years
ago, but that missed - or did not envision - the zero IO/APIC case.
Consolidate the zero check and return the provided "from" argument to the
core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU in a
cluster must allocate a new cluster CPU mask. As this happens during the
early startup of a CPU, where memory allocations cannot be done, the
mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and if
the to be brought up CPU is the first in a cluster the CPU takes over
this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which is
used today, but would fail completely for parallel bringup of CPUs.
The cluster association of a CPU can be computed from the APIC ID which
is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront and
the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux CPU
number. The CPU number allows it to retrieve the rest of the required
data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs provide
a new variable smpboot_control which contains the Linux CPU number for
now. The starting CPU can retrieve and compute all required information
for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via the
APIC ID, when smpboot_control has the corresponding control bit set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor because
confidental computing platforms need special treatment in the early
startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to late
discoveries of fundamental issue with those patches these commits never
happened.
The merge commit is unfortunately in the middle of the APIC commits so
unraveling it would have required a rebase or revert. As the parallel
bringup seems to be well on its way for 6.5 this would be just pointless
churn. As the commit does not contain any functional change it's not a
risk to keep it.
-----BEGIN PGP SIGNATURE-----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=IQWG
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the
lower bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as
that must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer
interrupt on x86. The return value is unchecked in the core code, so
it ends up to allocate interrupt number 0 which is subsequently
considered to be invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems
years ago, but that missed - or did not envision - the zero IO/APIC
case.
Consolidate the zero check and return the provided "from" argument to
the core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU
in a cluster must allocate a new cluster CPU mask. As this happens
during the early startup of a CPU, where memory allocations cannot be
done, the mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and
if the to be brought up CPU is the first in a cluster the CPU takes
over this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which
is used today, but would fail completely for parallel bringup of
CPUs.
The cluster association of a CPU can be computed from the APIC ID
which is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront
and the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux
CPU number. The CPU number allows it to retrieve the rest of the
required data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs
provide a new variable smpboot_control which contains the Linux CPU
number for now. The starting CPU can retrieve and compute all
required information for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via
the APIC ID, when smpboot_control has the corresponding control bit
set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor
because confidental computing platforms need special treatment in the
early startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to
late discoveries of fundamental issue with those patches these
commits never happened.
The merge commit is unfortunately in the middle of the APIC commits
so unraveling it would have required a rebase or revert. As the
parallel bringup seems to be well on its way for 6.5 this would be
just pointless churn. As the commit does not contain any functional
change it's not a risk to keep it.
* tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()
x86/apic: Fix atomic update of offset in reserve_eilvt_offset()
x86/coco: Export cc_vendor
x86/smpboot: Reference count on smpboot_setup_warm_reset_vector()
x86/smpboot: Remove initial_gs
x86/smpboot: Remove early_gdt_descr on 64-bit
x86/smpboot: Remove initial_stack on 64-bit
x86/apic/x2apic: Allow CPU cluster_mask to be populated in parallel
|
||
|
Linus Torvalds
|
1699dbebf3 |
- Improve code generation in ACPI's global lock's acquisition function
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGhkcACgkQEsHwGGHe VUq2yQ//W1tCGznJ+xSDBwOPillqwPB9asMrIjN9jSMet6mNZlApu4N44BTMHnD7 Jex+MOfabSbVEgwJ+zUOla065/fWhO2kdPNLdOS9Pui3kftEnMkKwZMbx0v6erk0 3rckg8UVkfMSrskvWkyy1RftJY9D5xiCTVzRmRpIR8GWn6eCFrGdLLINbLzSX5K/ 96cXF5iiTkWzj+nKAJhqsQZaXA+k2ro/bae7onX1gzJ08lR5x+XDDKv1HzJhnPJW Kw9lte4con7FRAEk4X8Q2UPTBvQjtFlfG7F1ho1jayWVwUO7z020tomnL0BO7Umd Whh6j66ZTD3cV+0oG5xu/JIBgHLlLP3q/+gZyePSDIXmoZm8MKmWldQ84Xbv0h8F dRxQUxxDAoRypK6ZN6aZgA/twxeIu6ezYr3paQiX9sjtQzFEa9DKTsOnzgrO0fsi t9nu4nzE4jBQ41DP6+GVlZ+ATujTixmirHNUj72H/sPVnqmniRLKMPGnsMPo9yi+ +J+Yu382nuKl8O5koWC7zfUEZCQWZCPfvX7JCLir6YZl6qV36mPZGJknMX+ogquc CwDor5US71sExmEOSkQTog5YN7ldXKruWRsvuIl2yMH3xHWwCWw0VS0pHCAn3Fqe r/MdKXYjjDr1QOZWB9EyqrAUNbS2ftjI9/zrzq8wNsbT67gEHug= =ObsH -----END PGP SIGNATURE----- Merge tag 'x86_acpi_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 ACPI update from Borislav Petkov: - Improve code generation in ACPI's global lock's acquisition function * tag 'x86_acpi_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ACPI/boot: Improve __acpi_acquire_global_lock |
||
|
Eric DeVolder
|
fed8d8773b |
x86/acpi/boot: Correct acpi_is_processor_usable() check
The logic in acpi_is_processor_usable() requires the online capable
bit be set for hotpluggable CPUs. The online capable bit has been
introduced in ACPI 6.3.
However, for ACPI revisions < 6.3 which do not support that bit, CPUs
should be reported as usable, not the other way around.
Reverse the check.
[ bp: Rewrite commit message. ]
Fixes:
|
||
|
Mario Limonciello
|
a74fabfbd1 |
x86/ACPI/boot: Use FADT version to check support for online capable
ACPI 6.3 introduced the online capable bit, and also introduced MADT
version 5.
Latter was used to distinguish whether the offset storing online capable
could be used. However ACPI 6.2b has MADT version "45" which is for
an errata version of the ACPI 6.2 spec. This means that the Linux code
for detecting availability of MADT will mistakenly flag ACPI 6.2b as
supporting online capable which is inaccurate as it's an ACPI 6.3 feature.
Instead use the FADT major and minor revision fields to distinguish this.
[ bp: Massage. ]
Fixes:
|
||
|
Uros Bizjak
|
22767544e9 |
x86/ACPI/boot: Improve __acpi_acquire_global_lock
Improve __acpi_acquire_global_lock by using a temporary variable. This enables compiler to perform if-conversion and improves generated code from: ... 72a: d1 ea shr %edx 72c: 83 e1 fc and $0xfffffffc,%ecx 72f: 83 e2 01 and $0x1,%edx 732: 09 ca or %ecx,%edx 734: 83 c2 02 add $0x2,%edx 737: f0 0f b1 17 lock cmpxchg %edx,(%rdi) 73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6> 73d: 83 e2 03 and $0x3,%edx 740: 31 c0 xor %eax,%eax 742: 83 fa 03 cmp $0x3,%edx 745: 0f 95 c0 setne %al 748: f7 d8 neg %eax to: ... 72a: d1 e9 shr %ecx 72c: 83 e2 fc and $0xfffffffc,%edx 72f: 83 e1 01 and $0x1,%ecx 732: 09 ca or %ecx,%edx 734: 83 c2 02 add $0x2,%edx 737: f0 0f b1 17 lock cmpxchg %edx,(%rdi) 73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6> 73d: 8d 41 ff lea -0x1(%rcx),%eax BTW: the compiler could generate: lea 0x2(%rcx,%rdx,1),%edx instead of: or %ecx,%edx add $0x2,%edx but unwated conversion from add to or when bits are known to be zero prevents this improvement. This is GCC PR108477. No functional change intended. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/20230320212012.12704-1-ubizjak%40gmail.com |
||
|
Brian Gerst
|
8f6be6d870 |
x86/smpboot: Remove initial_gs
Given its CPU#, each CPU can find its own per-cpu offset, and directly set GSBASE accordingly. The global variable can be eliminated. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Usama Arif <usama.arif@bytedance.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Usama Arif <usama.arif@bytedance.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20230316222109.1940300-9-usama.arif@bytedance.com |