1
Commit Graph

159 Commits

Author SHA1 Message Date
Michael Mueller
5a44bb061d KVM: s390: fix validity interception issue when gisa is switched off
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).

The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.

To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.

The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.

kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
           000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
           000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
           000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259	larl	%r2,000003d93de7e5c4
           000003d93deb0118: c0e53fa8beac	brasl	%r14,000003d9bd3c7e70
          #000003d93deb011e: af000000		mc	0,0
          >000003d93deb0122: a728ffea		lhi	%r2,-22
           000003d93deb0126: a7f4fe24		brc	15,000003d93deafd6e
           000003d93deb012a: 9101f0b0		tm	176(%r15),1
           000003d93deb012e: a774fe48		brc	7,000003d93deafdbe
           000003d93deb0132: 40a0f0ae		sth	%r10,174(%r15)
Call Trace:
 [<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
 [<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
 [<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
 [<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
 [<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
 [<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
 [<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
 [<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
 [<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
 [<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0

Cc: stable@vger.kernel.org
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: fe0ef00304 ("KVM: s390: sort out physical vs virtual pointers usage")
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801123109.2782155-1-mimu@linux.ibm.com
Message-ID: <20240801123109.2782155-1-mimu@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2024-08-06 06:33:18 +00:00
Christian Borntraeger
4c6abb7f7b KVM: s390: fix LPSWEY handling
in rare cases, e.g. for injecting a machine check we do intercept all
load PSW instructions via ICTL_LPSW. With facility 193 a new variant
LPSWEY was added. KVM needs to handle that as well.

Fixes: a3efa84292 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com>
2024-07-01 14:31:15 +02:00
Janosch Frank
4a59932874 KVM: s390: introduce kvm_s390_fpu_(store|load)
It's a bit nicer than having multiple lines and will help if there's
another re-work since we'll only have to change one location.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-21 15:09:13 +01:00
Tony Krowiak
fb5040ef7f KVM: s390: export kvm_s390_pv*_is_protected functions
Export the kvm_s390_pv_is_protected and kvm_s390_pv_cpu_is_protected
functions so that they can be called from other modules that carry a
GPL-compatible license.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Link: https://lore.kernel.org/r/20230815184333.6554-12-akrowiak@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18 15:24:35 +02:00
Sean Christopherson
6c30cd2ef4 KVM: s390: Mark __kvm_s390_init() and its descendants as __init
Tag __kvm_s390_init() and its unique helpers as __init.  These functions
are only ever called during module_init(), but could not be tagged
accordingly while they were invoked from the common kvm_arch_init(),
which is not __init because of x86.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20221130230934.1014142-29-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-29 15:41:22 -05:00
Paolo Bonzini
1e79a9e3ab - Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address support
 - Removal of a unused function
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmN/eYwACgkQ41TmuOI4
 ufjoxA/9Et38aXO/IhmUt8v0QhA4yec+sc5GSFfQSYehej/1Vqhw0DXx+ORUiRgg
 +rtiXJSSqkuD2dL+BDffY2xoul6nzNdVf4AbkcnrWscfWr6xwVYlPvuL0ymGI6J2
 U/IPedRoKw0bHw/wHs05yV5PubrRwDFERKhtyXWYGbPJhX0w2n3IFOoKH1oWBhLW
 Dc8jEs6t3gDbJ71Er0xoeBUoiuu+PgZG06cpOvzBZ0KclRgjADXyISqqk8/4mu8w
 R+/Wf8NcrbQYV1jfCeq5zIsKC8uvnFj25UuyTLumn5vh+dNNsvE72Khe4tz7LI0I
 ZPZ+GZuemu7Yi12dKjw4Sw3ui0ejWH/5XL1SVB0X/xYIWrBqOot+Lq6538GCng+c
 tJt+zsu64VFgXCCZ8O9qO4uE4DBL70H3ThT7VZxIghSTZtY0xh3uFc64f3/3d9dy
 K4WTJHrmMxhXaA/rqtIa8I53JvFl8CztofZATiQQesyPuc7lZ01w1Co5el4xYaxe
 YknyMTq11qf/iYqVOW7sjoWW/YRuuMZ4+FhpI3o/SllVdN98iTwkk1kP3wcoBO5P
 bvzpm+WXHbv9OxifPrqkqv34+upbjfEmSogHudQzagBX4vl3rZRfBCdQGCAha0Uc
 ZYyg68kiil5sWmHI/Ln/ZjANYfbS5sF0CreuWxnmqcwKl2NSN/E=
 =/1yt
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address support
- Removal of a unused function
2022-11-28 13:34:47 -05:00
Claudio Imbrenda
fb491d5500 KVM: s390: pv: asynchronous destroy for reboot
Until now, destroying a protected guest was an entirely synchronous
operation that could potentially take a very long time, depending on
the size of the guest, due to the time needed to clean up the address
space from protected pages.

This patch implements an asynchronous destroy mechanism, that allows a
protected guest to reboot significantly faster than previously.

This is achieved by clearing the pages of the old guest in background.
In case of reboot, the new guest will be able to run in the same
address space almost immediately.

The old protected guest is then only destroyed when all of its memory
has been destroyed or otherwise made non protected.

Two new PV commands are added for the KVM_S390_PV_COMMAND ioctl:

KVM_PV_ASYNC_CLEANUP_PREPARE: set aside the current protected VM for
later asynchronous teardown. The current KVM VM will then continue
immediately as non-protected. If a protected VM had already been
set aside for asynchronous teardown, but without starting the teardown
process, this call will fail. There can be at most one VM set aside at
any time. Once it is set aside, the protected VM only exists in the
context of the Ultravisor, it is not associated with the KVM VM
anymore. Its protected CPUs have already been destroyed, but not its
memory. This command can be issued again immediately after starting
KVM_PV_ASYNC_CLEANUP_PERFORM, without having to wait for completion.

KVM_PV_ASYNC_CLEANUP_PERFORM: tears down the protected VM previously
set aside using KVM_PV_ASYNC_CLEANUP_PREPARE. Ideally the
KVM_PV_ASYNC_CLEANUP_PERFORM PV command should be issued by userspace
from a separate thread. If a fatal signal is received (or if the
process terminates naturally), the command will terminate immediately
without completing. All protected VMs whose teardown was interrupted
will be put in the need_cleanup list. The rest of the normal KVM
teardown process will take care of properly cleaning up all remaining
protected VMs, including the ones on the need_cleanup list.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111170632.77622-2-imbrenda@linux.ibm.com
Message-Id: <20221111170632.77622-2-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-11-23 09:06:50 +00:00
Nico Boehr
6973091d1b KVM: s390: pv: don't allow userspace to set the clock under PV
When running under PV, the guest's TOD clock is under control of the
ultravisor and the hypervisor isn't allowed to change it. Hence, don't
allow userspace to change the guest's TOD clock by returning
-EOPNOTSUPP.

When userspace changes the guest's TOD clock, KVM updates its
kvm.arch.epoch field and, in addition, the epoch field in all state
descriptions of all VCPUs.

But, under PV, the ultravisor will ignore the epoch field in the state
description and simply overwrite it on next SIE exit with the actual
guest epoch. This leads to KVM having an incorrect view of the guest's
TOD clock: it has updated its internal kvm.arch.epoch field, but the
ultravisor ignores the field in the state description.

Whenever a guest is now waiting for a clock comparator, KVM will
incorrectly calculate the time when the guest should wake up, possibly
causing the guest to sleep for much longer than expected.

With this change, kvm_s390_set_tod() will now take the kvm->lock to be
able to call kvm_s390_pv_is_protected(). Since kvm_s390_set_tod_clock()
also takes kvm->lock, use __kvm_s390_set_tod_clock() instead.

The function kvm_s390_set_tod_clock is now unused, hence remove it.
Update the documentation to indicate the TOD clock attr calls can now
return -EOPNOTSUPP.

Fixes: 0f30350471 ("KVM: s390: protvirt: Do only reset registers that are accessible")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011160712.928239-2-nrb@linux.ibm.com
Message-Id: <20221011160712.928239-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-11-07 10:14:15 +01:00
Nico Boehr
fe0ef00304 KVM: s390: sort out physical vs virtual pointers usage
Fix virtual vs physical address confusion (which currently are the same).

Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20221020143159.294605-4-nrb@linux.ibm.com
Message-Id: <20221020143159.294605-4-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-10-26 14:27:41 +02:00
Claudio Imbrenda
be48d86f77 KVM: s390: pv: Add kvm_s390_cpus_from_pv to kvm-s390.h and add documentation
Future changes make it necessary to call this function from pv.c.

While we are at it, let's properly document kvm_s390_cpus_from_pv() and
kvm_s390_cpus_to_pv().

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-9-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-9-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-07-13 14:42:11 +00:00
Christian Borntraeger
d41b5e0176 KVM: s390/pci: enable zPCI for interpretive execution
Add the necessary code in s390 base, pci and KVM to enable interpretion
 of PCI pasthru.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+SKTgaM0CPnbq/vKEXu8gLWmHHwFAmLL7HcACgkQEXu8gLWm
 HHz0JA/8C/pG5JdeOfKA6ZgWuUtxh8NRAmn+XEh+sAPpdK1cmEc1Qt/UKteSFel4
 cmqfaCELalq/BaFxtPS7Wn8Rf4pY8/GwEzwM0dNiS09pTWv0YMXql6+013nr1TJU
 hWx5Pm9Za+T/UnbbHqlyJfjMf7/HELHmQYemDpCr6n1sIYMjsWIJI/P6ZsQiG/8V
 iDZQGIM8mfUC+PMzxsYAQZQB3nm6noZfnWlAcuChDCmgk2ZxdXSdZlHneiLLiYlb
 yZPOyTysA0H2iFgRGfXMI4Oz6vegr6xAcZ2c9mkc8lM42yKHQNpPa0PqEY+EzVV8
 0iaMT3LKWQRdjzTq6E4I5wb74KQn/t1TbTzM5wznOQ6GySRhPvnXVLOuYyUf5d+0
 PwtnfKyx2C5UtOn47Xuujp5FClP8NI8Se5uq6Myei5OtYAvrQtOFxiJAixLx8nCb
 ca/migenYr+R5zYn5g3o6oo2BUJfF3Y1Q8nazz602JRu42aZzVFu2GNB062YjleK
 w7SfIZNTh0picxSmoehSOQMVaiGY/C/ow7Xa+bLaCITQC3s8HY73m3gynaVOB23X
 2umrC3HkTnH2ymqvDC6O/5QG7IUlSfjbWzN0TdmPfV5KeM7BmBvP4vxqxRYyTY7b
 7UhFg820fZKZu4Ul740a2+HBNw73T8fc4xbZVJ6glJo3AdWQD5s=
 =YD+W
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-pci-5.20' into kernelorgnext

KVM: s390/pci: enable zPCI for interpretive execution

Add the necessary code in s390 base, pci and KVM to enable interpretion
of PCI pasthru.
2022-07-11 11:28:57 +02:00
Matthew Rosato
3f4bbb4342 KVM: s390: mechanism to enable guest zPCI Interpretation
The guest must have access to certain facilities in order to allow
interpretive execution of zPCI instructions and adapter event
notifications.  However, there are some cases where a guest might
disable interpretation -- provide a mechanism via which we can defer
enabling the associated zPCI interpretation facilities until the guest
indicates it wishes to use them.

Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-15-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
2022-07-11 09:54:31 +02:00
Janosch Frank
8aba09588d KVM: s390: Add CPU dump functionality
The previous patch introduced the per-VM dump functions now let's
focus on dumping the VCPU state via the newly introduced
KVM_S390_PV_CPU_COMMAND ioctl which mirrors the VM UV ioctl and can be
extended with new commands later.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517163629.3443-8-frankja@linux.ibm.com
Message-Id: <20220517163629.3443-8-frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
2022-06-01 16:57:14 +02:00
Janosch Frank
0460eb35b4 KVM: s390: Add configuration dump functionality
Sometimes dumping inside of a VM fails, is unavailable or doesn't
yield the required data. For these occasions we dump the VM from the
outside, writing memory and cpu data to a file.

Up to now PV guests only supported dumping from the inside of the
guest through dumpers like KDUMP. A PV guest can be dumped from the
hypervisor but the data will be stale and / or encrypted.

To get the actual state of the PV VM we need the help of the
Ultravisor who safeguards the VM state. New UV calls have been added
to initialize the dump, dump storage state data, dump cpu data and
complete the dump process. We expose these calls in this patch via a
new UV ioctl command.

The sensitive parts of the dump data are encrypted, the dump key is
derived from the Customer Communication Key (CCK). This ensures that
only the owner of the VM who has the CCK can decrypt the dump data.

The memory is dumped / read via a normal export call and a re-import
after the dump initialization is not needed (no re-encryption with a
dump key).

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517163629.3443-7-frankja@linux.ibm.com
Message-Id: <20220517163629.3443-7-frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
2022-06-01 16:57:14 +02:00
Paolo Bonzini
3b53f5535d KVM: s390: Fix, test and feature for 5.18 part 2
- memop selftest
 - fix SCK locking
 - adapter interruptions virtualization for secure guests
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+SKTgaM0CPnbq/vKEXu8gLWmHHwFAmIvW8IACgkQEXu8gLWm
 HHx4Bw/+PgXvGCbrxnOL2Y7zzIRrniFag1cPcxNXCjWAH4UnzU9u+5MJ0PpM4119
 S+Ch8b+fScXpjBmDkLhjsmm4MlVMZ6/1DpbB+XmalSqDEimLAigbT+7+xViCpLja
 jajMbIIFUhcmcSjIz47jbtDDeKvBvCD8O7J0nP5fMFV2hxpm9or5JW89BIuJRJiE
 jrfG4T3FhCTVH0wpWtZm6suJMJ/SjQ9d8LD6e2i5Fx+1OVMpDJF9umnAVwBMyiKN
 uCbAkMftMmTXYhFwM2CWS65QoWTpDNSYoln1sxNpDgapoQxw+3kAYyMSz0tVMElY
 yRTBJ3HoIZAyW0bzaK4BSF2bbiewcZqI3o2LMPBIlBCvJaRzJsbH48l02lWsAT3S
 iO3i4ZpHQLNgOdT1G7w0Xk5XaUCCtWVPSqvjy79u5L5YALKf1DZaW6vgHUQeeHpA
 oogVE5hjDZof0F5Uuve3lqNh8UhC9CYRVcGkSooFZ12Yf/dsWrUWQe0c5hij+hGH
 3lWK7KfNwK18X0QBntg7gzsuc+cO4smTNb20ILsK3n1CvDrWtlpxnY/F8mT9fVxp
 sUybn+1FD0LA06E7i13rM+a2b0XAsqvGtlA94nt1WtuyshdBsufyhKg7To9+KAUe
 YMKhZriwdls+/BXSYNlE6nxMmCkmfciMVFiz6LW2e29V5WArydU=
 =cjy5
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-5.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix, test and feature for 5.18 part 2

- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
2022-03-15 17:19:02 -04:00
Claudio Imbrenda
c0573ba5c5 KVM: s390x: fix SCK locking
When handling the SCK instruction, the kvm lock is taken, even though
the vcpu lock is already being held. The normal locking order is kvm
lock first and then vcpu lock. This is can (and in some circumstances
does) lead to deadlocks.

The function kvm_s390_set_tod_clock is called both by the SCK handler
and by some IOCTLs to set the clock. The IOCTLs will not hold the vcpu
lock, so they can safely take the kvm lock. The SCK handler holds the
vcpu lock, but will also somehow need to acquire the kvm lock without
relinquishing the vcpu lock.

The solution is to factor out the code to set the clock, and provide
two wrappers. One is called like the original function and does the
locking, the other is called kvm_s390_try_set_tod_clock and uses
trylock to try to acquire the kvm lock. This new wrapper is then used
in the SCK handler. If locking fails, -EAGAIN is returned, which is
eventually propagated to userspace, thus also freeing the vcpu lock and
allowing for forward progress.

This is not the most efficient or elegant way to solve this issue, but
the SCK instruction is deprecated and its performance is not critical.

The goal of this patch is just to provide a simple but correct way to
fix the bug.

Fixes: 6a3f95a6b0 ("KVM: s390: Intercept SCK instruction")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220301143340.111129-1-imbrenda@linux.ibm.com
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
2022-03-14 16:12:27 +01:00
Sean Christopherson
cc65c3a110 KVM: s390: Replace KVM_REQ_MMU_RELOAD usage with arch specific request
Add an arch request, KVM_REQ_REFRESH_GUEST_PREFIX, to deal with guest
prefix changes instead of piggybacking KVM_REQ_MMU_RELOAD.  This will
allow for the removal of the generic KVM_REQ_MMU_RELOAD, which isn't
actually used by generic KVM.

No functional change intended.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225182248.3812651-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-01 08:58:25 -05:00
Michael Mueller
ee6a569d3b KVM: s390: pv: make use of ultravisor AIV support
This patch enables the ultravisor adapter interruption vitualization
support indicated by UV feature BIT_UV_FEAT_AIV. This allows ISC
interruption injection directly into the GISA IPM for PV kvm guests.

Hardware that does not support this feature will continue to use the
UV interruption interception method to deliver ISC interruptions to
PV kvm guests. For this purpose, the ECA_AIV bit for all guest cpus
will be cleared and the GISA will be disabled during PV CPU setup.

In addition a check in __inject_io() has been removed. That reduces the
required instructions for interruption handling for PV and traditional
kvm guests.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220209152217.1793281-2-mimu@linux.ibm.com
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
2022-02-25 14:30:13 +01:00
Paolo Bonzini
5e4e84f112 KVM: s390: Fix and cleanup
- fix sigp sense/start/stop/inconsistency
 - cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+SKTgaM0CPnbq/vKEXu8gLWmHHwFAmHAaOoACgkQEXu8gLWm
 HHzRrQ/6A+Q2KDk5GJ5ISE3fhNn6Cur33muo+YqeGvTIiJXqJcM8Blk/iFZKBslm
 D61C8XMZnR3Svbfct7k80bx2WYMjji+gTBksgb9EbEtzFaQLfF9F/aYYcvIKpFoA
 0D9KpE6oeKLpoMgWsRBJb7uq8AKO4sBZR0juLuHAIzIzAZPC0cALuUP8R1MH3qmG
 7kR8rke8+KRH4NQYSX16IB+9pZNZzyt+HqNUY23plv06bMkX0lp+zaJCQO8wn6Bb
 n4iWp7uJTQWEOPoKVk6FLIMC5xQFNWR0LDxMR4ucNTRxc4do6R/AS9MtyC9UDtDx
 weAu4z37vfPaElHO1+51QJ1hoYa0u8kcIeiug+GkkYK3TdrkMyJMF4JERnoV/WqR
 6XxtEdkPl/HDVU+azjK64jGORj8WQkYhpuW/dvxeu7GLw0m9OvnCcbk9pSUAgiyz
 b3U1uEKRBlwlejmFv6+d470l2BPjdi3OKQFCsOMD7XXwnm4NrDYqTAXVeHP/KN4B
 0+oAoDc1EQN8lUhRu+G9YrpUklnwx9bsmhfNAWbX6wy8rShwXn6hOK9CreqpkEc1
 YaRJ1b/UbKV64faMGzZU2AyJ7T4z21g0tK1ZOUNlKqd5WTjrGitN2ogVebuk1I4V
 2L61tZeLs7Tn7iHM7UG5c+xYNP9Go3ikK2IAgGtFdsKwiFf3EuQ=
 =+F7q
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix and cleanup

- fix sigp sense/start/stop/inconsistency
- cleanups
2021-12-21 12:59:53 -05:00
Eric Farman
812de04661 KVM: s390: Clarify SIGP orders versus STOP/RESTART
With KVM_CAP_S390_USER_SIGP, there are only five Signal Processor
orders (CONDITIONAL EMERGENCY SIGNAL, EMERGENCY SIGNAL, EXTERNAL CALL,
SENSE, and SENSE RUNNING STATUS) which are intended for frequent use
and thus are processed in-kernel. The remainder are sent to userspace
with the KVM_CAP_S390_USER_SIGP capability. Of those, three orders
(RESTART, STOP, and STOP AND STORE STATUS) have the potential to
inject work back into the kernel, and thus are asynchronous.

Let's look for those pending IRQs when processing one of the in-kernel
SIGP orders, and return BUSY (CC2) if one is in process. This is in
agreement with the Principles of Operation, which states that only one
order can be "active" on a CPU at a time.

Cc: stable@vger.kernel.org
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211213210550.856213-2-farman@linux.ibm.com
[borntraeger@linux.ibm.com: add stable tag]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
2021-12-17 14:52:47 +01:00
Maciej S. Szmigiero
a54d806688 KVM: Keep memslots in tree-based structures instead of array-based ones
The current memslot code uses a (reverse gfn-ordered) memslot array for
keeping track of them.

Because the memslot array that is currently in use cannot be modified
every memslot management operation (create, delete, move, change flags)
has to make a copy of the whole array so it has a scratch copy to work on.

Strictly speaking, however, it is only necessary to make copy of the
memslot that is being modified, copying all the memslots currently present
is just a limitation of the array-based memslot implementation.

Two memslot sets, however, are still needed so the VM continues to run
on the currently active set while the requested operation is being
performed on the second, currently inactive one.

In order to have two memslot sets, but only one copy of actual memslots
it is necessary to split out the memslot data from the memslot sets.

The memslots themselves should be also kept independent of each other
so they can be individually added or deleted.

These two memslot sets should normally point to the same set of
memslots. They can, however, be desynchronized when performing a
memslot management operation by replacing the memslot to be modified
by its copy.  After the operation is complete, both memslot sets once
again point to the same, common set of memslot data.

This commit implements the aforementioned idea.

For tracking of gfns an ordinary rbtree is used since memslots cannot
overlap in the guest address space and so this data structure is
sufficient for ensuring that lookups are done quickly.

The "last used slot" mini-caches (both per-slot set one and per-vCPU one),
that keep track of the last found-by-gfn memslot, are still present in the
new code.

Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
2021-12-08 04:24:34 -05:00
Maciej S. Szmigiero
6a656832aa KVM: s390: Introduce kvm_s390_get_gfn_end()
And use it where s390 code would just access the memslot with the highest
gfn directly.

No functional change intended.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <42496041d6af1c23b1cbba2636b344ca8d5fc3af.1638817641.git.maciej.szmigiero@oracle.com>
2021-12-08 04:24:33 -05:00
Marc Zyngier
46808a4cb8 KVM: Use 'unsigned long' as kvm_for_each_vcpu()'s index
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.

Let's bite the bullet and repaint all of it in one go.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08 04:24:15 -05:00
Eric Farman
67cf68b6a5 KVM: s390: Add a routine for setting userspace CPU state
This capability exists, but we don't record anything when userspace
enables it. Let's refactor that code so that a note can be made in
the debug logs that it was enabled.

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211008203112.1979843-7-farman@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-25 09:20:39 +02:00
Sean Christopherson
4eeef24241 KVM: x86: Query vcpu->vcpu_idx directly and drop its accessor
Read vcpu->vcpu_idx directly instead of bouncing through the one-line
wrapper, kvm_vcpu_get_idx(), and drop the wrapper.  The wrapper is a
remnant of the original implementation and serves no purpose; remove it
before it gains more users.

Back when kvm_vcpu_get_idx() was added by commit 497d72d80a ("KVM: Add
kvm_vcpu_get_idx to get vcpu index in kvm->vcpus"), the implementation
was more than just a simple wrapper as vcpu->vcpu_idx did not exist and
retrieving the index meant walking over the vCPU array to find the given
vCPU.

When vcpu_idx was introduced by commit 8750e72a79 ("KVM: remember
position in kvm->vcpus array"), the helper was left behind, likely to
avoid extra thrash (but even then there were only two users, the original
arm usage having been removed at some point in the past).

No functional change intended.

Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210910183220.2397812-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22 10:33:11 -04:00
Halil Pasic
a3e03bc136 KVM: s390: index kvm->arch.idle_mask by vcpu_idx
While in practice vcpu->vcpu_idx ==  vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.

Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
                vcpu = kvm_get_vcpu(kvm, vcpu_id);
		do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id.  The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.

Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx.  To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.

Fixes: 1ee0bc559d ("KVM: s390: get rid of local_int array")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-08-27 18:35:41 +02:00
Pierre Morel
87e28a15c4 KVM: s390: diag9c (directed yield) forwarding
When we intercept a DIAG_9C from the guest we verify that the
target real CPU associated with the virtual CPU designated by
the guest is running and if not we forward the DIAG_9C to the
target real CPU.

To avoid a diag9c storm we allow a maximal rate of diag9c forwarding.

The rate is calculated as a count per second defined as a new
parameter of the s390 kvm module: diag9c_forwarding_hz .

The default value of 0 is to not forward diag9c.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/1613997661-22525-2-git-send-email-pmorel@linux.ibm.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-09 10:16:26 +01:00
Janosch Frank
fe28c7868f KVM: s390: protvirt: Report CPU state to Ultravisor
VCPU states have to be reported to the ultravisor for SIGP
interpretation, kdump, kexec and reboot.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27 19:47:12 +01:00
Janosch Frank
29b40f105e KVM: s390: protvirt: Add initial vm and cpu lifecycle handling
This contains 3 main changes:
1. changes in SIE control block handling for secure guests
2. helper functions for create/destroy/unpack secure guests
3. KVM_S390_PV_COMMAND ioctl to allow userspace dealing with secure
machines

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27 19:47:11 +01:00
Janosch Frank
3e6c556899 KVM: s390: protvirt: Add UV debug trace
Let's have some debug traces which stay around for longer than the
guest.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27 19:47:10 +01:00
Michael Mueller
1282c21eb3 KVM: s390: add the GIB and its related life-cyle functions
The Guest Information Block (GIB) links the GISA of all guests
that have adapter interrupts pending. These interrupts cannot be
delivered because all vcpus of these guests are currently in WAIT
state or have masked the respective Interruption Sub Class (ISC).
If enabled, a GIB alert is issued on the host to schedule these
guests to run suitable vcpus to consume the pending interruptions.

This mechanism allows to process adapter interrupts for currently
not running guests.

The GIB is created during host initialization and associated with
the Adapter Interruption Facility in case an Adapter Interruption
Virtualization Facility is available.

The GIB initialization and thus the activation of the related code
will be done in an upcoming patch of this series.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-10-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05 14:29:23 +01:00
Michael Mueller
246b72183b KVM: s390: move bitmap idle_mask into arch struct top level
The vcpu idle_mask state is used by but not specific
to the emulated floating interruptions. The state is
relevant to gisa related interruptions as well.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-4-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05 14:29:22 +01:00
David Hildenbrand
9ea5972865 KVM: s390: vsie: simulate VCPU SIE entry/exit
VCPU requests and VCPU blocking right now don't take care of the vSIE
(as it was not necessary until now). But we want to have synchronous VCPU
requests that will also be handled before running the vSIE again.

So let's simulate a SIE entry of the VCPU when calling the sie during
vSIE handling and check for PROG_ flags. The existing infrastructure
(e.g. exit_sie()) will then detect that the SIE (in form of the vSIE) is
running and properly kick the vSIE CPU, resulting in it leaving the vSIE
loop and therefore the vSIE interception handler, allowing it to handle
VCPU requests.

E.g. if we want to modify the crycb of the VCPU and make sure that any
masks also get applied to the VSIE crycb shadow (which uses masks from the
VCPU crycb), we will need a way to hinder the vSIE from running and make
sure to process the updated crycb before reentering the vSIE again.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180925231641.4954-2-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 09:13:20 +02:00
Tony Krowiak
20c922f04b KVM: s390: reset crypto attributes for all vcpus
Introduces a new function to reset the crypto attributes for all
vcpus whether they are running or not. Each vcpu in KVM will
be removed from SIE prior to resetting the crypto attributes in its
SIE state description. After all vcpus have had their crypto attributes
reset the vcpus will be restored to SIE.

This function is incorporated into the kvm_s390_vm_set_crypto(kvm)
function to fix a reported issue whereby the crypto key wrapping
attributes could potentially get out of synch for running vcpus.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-05-17 09:02:10 +02:00
Christian Borntraeger
c3b9e3e1ea KVM: s390: implement CPU model only facilities
Some facilities should only be provided to the guest, if they are
enabled by a CPU model. This allows us to avoid capabilities and
to simply fall back to the cpumodel for deciding about a facility
without enabling it for older QEMUs or QEMUs without a CPU
model.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-09 09:44:17 +00:00
David Hildenbrand
0e7def5fb0 KVM: s390: provide only a single function for setting the tod (fix SCK)
Right now, SET CLOCK called in the guest does not properly take care of
the epoch index, as the call goes via the old kvm_s390_set_tod_clock()
interface. So the epoch index is neither reset to 0, if required, nor
properly set to e.g. 0xff on negative values.

Fix this by providing a single kvm_s390_set_tod_clock() function. Move
Multiple-epoch facility handling into it.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea7 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-20 20:51:28 +00:00
Christian Borntraeger
cb7485da3e KVM: s390: use switch vs jump table in intercept.c
Instead of having huge jump tables for function selection,
let's use normal switch/case statements for the instruction
handlers in intercept.c We can now also get rid of
intercept_handler_t.

This allows the compiler to make the right decision depending
on the situation (e.g. avoid jump-tables for thunks).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-14 13:53:43 +00:00
Michael Mueller
d7c5cb0105 KVM: s390: exploit GISA and AIV for emulated interrupts
The adapter interruption virtualization (AIV) facility is an
optional facility that comes with functionality expected to increase
the performance of adapter interrupt handling for both emulated and
passed-through adapter interrupts. With AIV, adapter interrupts can be
delivered to the guest without exiting SIE.

This patch provides some preparations for using AIV for emulated adapter
interrupts (including virtio) if it's available. When using AIV, the
interrupts are delivered at the so called GISA by setting the bit
corresponding to its Interruption Subclass (ISC) in the Interruption
Pending Mask (IPM) instead of inserting a node into the floating interrupt
list.

To keep the change reasonably small, the handling of this new state is
deferred in get_all_floating_irqs and handle_tpi. This patch concentrates
on the code handling enqueuement of emulated adapter interrupts, and their
delivery to the guest.

Note that care is still required for adapter interrupts using AIV,
because there is no guarantee that AIV is going to deliver the adapter
interrupts pending at the GISA (consider all vcpus idle). When delivering
GISA adapter interrupts by the host (usual mechanism) special attention
is required to honor interrupt priorities.

Empirical results show that the time window between making an interrupt
pending at the GISA and doing kvm_s390_deliver_pending_interrupts is
sufficient for a guest with at least moderate cpu activity to get adapter
interrupts delivered within the SIE, and potentially save some SIE exits
(if not other deliverable interrupts).

The code will be activated with a follow-up patch.

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26 11:11:39 +01:00
David Hildenbrand
8d5fb0dc4e KVM: s390: introduce and use kvm_s390_test_cpuflags()
Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24 17:46:42 +01:00
David Hildenbrand
9daecfc660 KVM: s390: introduce and use kvm_s390_clear_cpuflags()
Use it just like kvm_s390_set_cpuflags().

Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24 17:46:42 +01:00
David Hildenbrand
2018224df3 KVM: s390: rename __set_cpuflag() to kvm_s390_set_cpuflags()
No need to make this function special. Move it to a header right away.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24 17:46:41 +01:00
David Hildenbrand
a9f6c9a92f KVM: s390: cleanup struct kvm_s390_float_interrupt
"wq" is not used at all. "cpuflags" can be access directly via the vcpu,
just as "float_int" via vcpu->kvm.
While at it, reuse _set_cpuflag() to make the code look nicer.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180108193747.10818-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-16 16:15:18 +01:00
Greg Kroah-Hartman
940f89a5a3 KVM: s390: Remove redundant license text
Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies
the license in a specific and legally-defined manner.  So the extra GPL
text wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-12-06 09:18:42 +01:00
Greg Kroah-Hartman
d809aa2387 KVM: s390: add SPDX identifiers to the remaining files
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the arch/s390/kvm/ files with the correct SPDX license
identifier based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-12-06 09:18:39 +01:00
QingFeng Hao
b7c92f1a4e s390/sthyi: reorganize sthyi implementation
As we need to support sthyi instruction on LPAR too, move the common code
to kernel part and kvm related code to intercept.c for better reuse.

Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:15:33 +02:00
Collin L. Walling
8fa1696ea7 KVM: s390: Multiple Epoch Facility support
Allow for the enablement of MEF and the support for the extended
epoch in SIE and VSIE for the extended guest TOD-Clock.

A new interface is used for getting/setting a guest's extended TOD-Clock
that uses a single ioctl invocation, KVM_S390_VM_TOD_EXT.  Since the
host time is a moving target that might see an epoch switch or STP sync
checks we need an atomic ioctl and cannot use the exisiting two
interfaces. The old method of getting and setting the guest TOD-Clock is
still retained and is used when the old ioctls are called.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-29 15:15:54 +02:00
QingFeng Hao
4d62fcc0b6 KVM: s390: Inject machine check into the guest
If the exit flag of SIE indicates that a machine check has happened
during guest's running and needs to be injected, inject it to the guest
accordingly.
But some machine checks, e.g. Channel Report Pending (CRW), refer to
host conditions only (the guest's channel devices are not managed by
the kernel directly) and are therefore not injected into the guest.
External Damage (ED) is also not reinjected into the guest because ETR
conditions are gone in Linux and STP conditions are not enabled in the
guest, and ED contains only these 8 ETR and STP conditions.
In general, instruction-processing damage, system recovery,
storage error, service-processor damage and channel subsystem damage
will be reinjected into the guest, and the remain (System damage,
timing-facility damage, warning, ED and CRW) will be handled on the host.

Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-28 12:42:32 +02:00
Farhan Ali
730cd632c4 KVM: s390: Support keyless subset guest mode
If the KSS facility is available on the machine, we also make it
available for our KVM guests.

The KSS facility bypasses storage key management as long as the guest
does not issue a related instruction. When that happens, the control is
returned to the host, which has to turn off KSS for a guest vcpu
before retrying the instruction.

Signed-off-by: Corey S. McQuay <csmcquay@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-04-21 11:08:11 +02:00
Fan Zhang
4e0b1ab72b KVM: s390: gs support for kvm guests
This patch adds guarded storage support for KVM guest. We need to
setup the necessary control blocks, the kvm_run structure for the
new registers, the necessary wrappers for VSIE, as well as the
machine check save areas.
GS is enabled lazily and the register saving and reloading is done in
KVM code.  As this feature adds new content for migration, we provide
a new capability for enablement (KVM_CAP_S390_GS).

Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-03-22 18:59:33 +01:00
David Hildenbrand
0c9d86833d KVM: s390: use defines for execution controls
Let's replace the bitmasks by defines. Reconstructed from code, comments
and commit messages.

Tried to keep the defines short and map them to feature names. In case
they don't completely map to features, keep them in the stye of ICTL
defines.

This effectively drops all "U" from the existing numbers. I think this
should be fine (as similarly done for e.g. ICTL defines).

I am not 100% sure about the ECA_MVPGI and ECA_PROTEXCI bits as they are
always used in pairs.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170313104828.13362-1-david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[some renames, add one missing place]
2017-03-16 13:05:10 +01:00