master
520 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Alice Ryhl
|
2313ab74c3 |
cfi: tweak llvm version for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
The llvm fix [1] did not make it for 19.0.0, but ended up getting
backported to llvm 19.1.3 [2]. Thus, fix the version requirement to
correctly specify which versions have the bug.
Link: https://github.com/llvm/llvm-project/pull/104826 [1]
Link: https://github.com/llvm/llvm-project/pull/113938 [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202410281414.c351044e-oliver.sang@intel.com
Fixes:
|
||
|
Alice Ryhl
|
8b8ca9c25f |
cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
The HAVE_CFI_ICALL_NORMALIZE_INTEGERS option has some tricky conditions
when KASAN or GCOV are turned on, as in that case we need some clang and
rustc fixes [1][2] to avoid boot failures. The intent with the current
setup is that you should be able to override the check and turn on the
option if your clang/rustc has the fix. However, this override does not
work in practice. Thus, use the new RUSTC_LLVM_VERSION to correctly
implement the check for whether the fix is available.
Additionally, remove KASAN_HW_TAGS from the list of incompatible
options. The CFI_ICALL_NORMALIZE_INTEGERS option is incompatible with
KASAN because LLVM will emit some constructors when using KASAN that are
assigned incorrect CFI tags. These constructors are emitted due to use
of -fsanitize=kernel-address or -fsanitize=kernel-hwaddress that are
respectively passed when KASAN_GENERIC or KASAN_SW_TAGS are enabled.
However, the KASAN_HW_TAGS option relies on hardware support for MTE
instead and does not pass either flag. (Note also that KASAN_HW_TAGS
does not `select CONSTRUCTORS`.)
Link: https://github.com/llvm/llvm-project/pull/104826 [1]
Link: https://github.com/rust-lang/rust/pull/129373 [2]
Fixes:
|
||
|
Alice Ryhl
|
4c66f8307a |
cfi: encode cfi normalized integers + kasan/gcov bug in Kconfig
There is a bug in the LLVM implementation of KASAN and GCOV that makes
these options incompatible with the CFI_ICALL_NORMALIZE_INTEGERS option.
The bug has already been fixed in llvm/clang [1] and rustc [2]. However,
Kconfig currently has no way to gate features on the LLVM version inside
rustc, so we cannot write down a precise `depends on` clause in this
case. Instead, a `def_bool` option is defined for whether
CFI_ICALL_NORMALIZE_INTEGERS is available, and its default value is set
to false when GCOV or KASAN are turned on. End users using a patched
clang/rustc can turn on the HAVE_CFI_ICALL_NORMALIZE_INTEGERS option
directly to override this.
An alternative solution is to inspect a binary created by clang or rustc
to see whether the faulty CFI tags are in the binary. This would be a
precise check, but it would involve hard-coding the *hashed* version of
the CFI tag. This is because there's no way to get clang or rustc to
output the unhased version of the CFI tag. Relying on the precise
hashing algorithm using by CFI seems too fragile, so I have not pursued
this option. Besides, this kind of hack is exactly what lead to the LLVM
bug in the first place.
If the CFI_ICALL_NORMALIZE_INTEGERS option is used without CONFIG_RUST,
then we actually can perform a precise check today: just compare the
clang version number. This works since clang and llvm are always updated
in lockstep. However, encoding this in Kconfig would give the
HAVE_CFI_ICALL_NORMALIZE_INTEGERS option a dependency on CONFIG_RUST,
which is not possible as the reverse dependency already exists.
HAVE_CFI_ICALL_NORMALIZE_INTEGERS is defined to be a `def_bool` instead
of `bool` to avoid asking end users whether they want to turn on the
option. Turning it on explicitly is something only experts should do, so
making it hard to do so is not an issue.
I added a `depends on CFI_CLANG` clause to the new Kconfig option. I'm
not sure whether that makes sense or not, but it doesn't seem to make a
big difference.
In a future kernel release, I would like to add a Kconfig option similar
to CLANG_VERSION/RUSTC_VERSION for inspecting the version of the LLVM
inside rustc. Once that feature lands, this logic will be replaced with
a precise version check. This check is not being introduced here to
avoid introducing a new _VERSION constant in a fix.
Link: https://github.com/llvm/llvm-project/pull/104826 [1]
Link: https://github.com/rust-lang/rust/pull/129373 [2]
Fixes:
|
||
|
Linus Torvalds
|
5701725692 |
Rust changes for v6.12
Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool
warnings), teach objtool about 'noreturn' Rust symbols and mimic
'___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be
objtool-warning-free, so enable it to run for all Rust object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on change.
- Split helpers file into several files in a folder, to avoid conflicts
in it. Eventually those files will be moved to the right places with
the new build system. In addition, remove the need to manually export
the symbols defined there, reusing existing machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc'
exists using an atomic), 'ListLinks' (the prev/next pointers for an
item in a linked list), 'List' (the linked list itself), 'Iter' (an
iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows
to remove elements), 'ListArcField' (a field exclusively owned by a
'ListArc'), as well as support for heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the upcoming
Rust Binder. This includes 'RBTree' (the red-black tree itself),
'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation
for a node), 'Iter' and 'IterMut' (immutable and mutable iterators),
'Cursor' (bidirectional cursor that allows to remove elements), as
well as an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite'
trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmbzNz4ACgkQGXyLc2ht
IW3muA/9HcPL0QqVB5+SqSRqcatmrFU/wq8Oaa6Z/No0JaynqyikK+R1WNokUd/5
WpQi4PC1OYV+ekyAuWdkooKmaSqagH5r53XlezNw+cM5zo8y7p0otVlbepQ0t3Ky
pVEmfDRIeSFXsKrg91BJUKyJf70TQlgSggDVCExlanfOjPz88C1+s3EcJ/XWYGKQ
cRk/XDdbF5eNaldp2MriVF0fw7XktgIrmVzxt/z0lb4PE7RaCAnO6gSQI+90Vb2d
zvyOYKS4AkqE3suFvDIIUlPUv+8XbACj0c4wvBZHH5uZGTbgWUffqygJ45GqChEt
c4fS/+E8VaM1z0EvxNczC0nQkfLwkTc1mgbP+sG3VZJMPVCJ2zQan1/ond7GqCpw
pt6uQaGvDsAvllm7sbiAIVaAY81icqyYWKfNBXLLEL7DhY5je5Wq+E83XQ8d5u5F
EuapnZhW3y12d6UCsSe9bD8W45NFoWHPXky1TzT+whTxnX1yH9YsPXbJceGSbbgd
Lw3GmUtZx2bVAMToVjNFD2lPA3OmPY1e2lk0jwzTuQrEXfnZYuzbjqs3YUijb7xR
AlsWfIb0IHBwHWpB7da24ezqWP2VD4eaDdD8/+LmDSj6XLngxMNWRLKmXT000eTW
vIFP9GJrvag2R3YFPhrurgGpRsp8HUTLtvcZROxp2JVQGQ7Z4Ww=
=52BN
-----END PGP SIGNATURE-----
Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
|
||
|
Linus Torvalds
|
726e2d0cf2 |
dma-mapping updates for linux 6.12
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmbr2BALHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYNheA/6A453SQy2kFvspFRvEp8ztEqtvxwxGLAUMIyvmU+a
9b37KlMwUnpbMsXK5+KtYdTLRoIvtl89uIkdZq7pYYKj0uoPZvF9QVnKtrJWAvqK
fFuauokZznuD3ZSd6v6uY4ijb29ImGfx5kZopQf1zWoYLENxM7mWqRU+eqxDozev
FbyfYhJzMBhpHveen9+Q7PEfi/90ZdEqtJhSK2AOzuV9ZvbYiSFCrcnT/4wM30DS
2OxjGa8tKcGYZ9ah0rF2V5hboaRuYedTFgXoKfUSJINJkzmBlTXdxVx5Xr3kQtyC
7S/xv2y79CXkDKck2+IY7xkhwwBsXPrTAyTzWAIJqOEmaMJ4KqEW54JOsK+VHfmO
29UKBnASOK0xvfCzakm2631iOzEZF743RgpQiOGeMcnph789Mwu8EUCcqeEW/fJy
Xh7B0z3/XgJz8BtTG/64IhmqO63Cwa/o7DSQdLr9dh5F/mPBzqrnRov97KL7mH1q
VSO0Z7+8J0x9ALcYutpth/IzG/lXtXn/pfR1sj6dBHvjf5SwjuT8MKUHgh0l6N+C
BWZn8swwrZaJ2Li2Gv3CpnCzVQZCkL6ns9VqAWiWq7VfGhDLndMqfi/jHCyGH83i
E3dMtqf81XaQ7JRDPCs7Jx/4Zkn/iNkkZe8IQsByMc1BY4oeD7/Z2s8mkK8MbNla
/CA=
=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
||
|
Alice Ryhl
|
ce4a262098 |
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
Introduce a Kconfig option for enabling the experimental option to normalize integer types. This ensures that integer types of the same size and signedness are considered compatible by the Control Flow Integrity sanitizer. The security impact of this flag is minimal. When Sami Tolvanen looked into it, he found that integer normalization reduced the number of unique type hashes in the kernel by ~1%, which is acceptable. This option exists for compatibility with Rust, as C and Rust do not have the same set of integer types. There are cases where C has two different integer types of the same size and signedness, but Rust only has one integer type of that size and signedness. When Rust calls into C functions using such types in their signature, this results in CFI failures. One example is 'unsigned long long' and 'unsigned long' which are both 64-bit on LP64 targets, so on those targets this flag will give both types the same CFI tag. This flag changes the ABI heavily. It is not applied automatically when CONFIG_RUST is turned on to make sure that the CONFIG_RUST option does not change the ABI of C code. For example, some build may need to make other changes atomically with toggling this flag. Having it be a separate option makes it possible to first turn on normalized integer tags, and then later turn on CONFIG_RUST. Similarly, when turning on CONFIG_RUST in a build, you may need a few attempts where the RUST=y commit gets reverted a few times. It is inconvenient if reverting RUST=y also requires reverting the changes you made to support normalized integer tags. To avoid having this flag impact builds that don't care about this, the next patch in this series will make CONFIG_RUST turn on this option using `select` rather than `depends on`. Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com> Acked-by: Kees Cook <kees@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20240801-kcfi-v2-1-c93caed3d121@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Christoph Hellwig
|
de6c85bf91 |
dma-mapping: clearly mark DMA ops as an architecture feature
DMA ops are a helper for architectures and not for drivers to override the DMA implementation. Unfortunately driver authors keep ignoring this. Make the fact more clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers overriding their dma_ops depend on that. These drivers should probably be marked broken, but we can give them a bit of a grace period for that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6 Acked-by: Robin Murphy <robin.murphy@arm.com> |
||
|
Valentin Schneider
|
d65d411c92 |
treewide: context_tracking: Rename CONTEXT_* into CT_STATE_*
Context tracking state related symbols currently use a mix of the CONTEXT_ (e.g. CONTEXT_KERNEL) and CT_SATE_ (e.g. CT_STATE_MASK) prefixes. Clean up the naming and make the ctx_state enum use the CT_STATE_ prefix. Suggested-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Valentin Schneider <vschneid@redhat.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> |
||
|
Linus Torvalds
|
14d7c92f8d |
Revert "mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default"
This reverts commit |
||
|
Rafael Aquini
|
3afb76a66b |
mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default
An ASLR regression was noticed [1] and tracked down to file-mapped areas
being backed by THP in recent kernels. The 21-bit alignment constraint
for such mappings reduces the entropy for randomizing the placement of
64-bit library mappings and breaks ASLR completely for 32-bit libraries.
The reported issue is easily addressed by increasing vm.mmap_rnd_bits and
vm.mmap_rnd_compat_bits. This patch just provides a simple way to set
ARCH_MMAP_RND_BITS and ARCH_MMAP_RND_COMPAT_BITS to their maximum values
allowed by the architecture at build time.
[1] https://zolutal.github.io/aslrnt/
[akpm@linux-foundation.org: default to `y' if 32-bit, per Rafael]
Link: https://lkml.kernel.org/r/20240606180622.102099-1-aquini@redhat.com
Fixes:
|
||
|
Samuel Holland
|
6cbd1d6d36 |
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
Several architectures provide an API to enable the FPU and run floating-point SIMD code in kernel space. However, the function names, header locations, and semantics are inconsistent across architectures, and FPU support may be gated behind other Kconfig options. provide a standard way for architectures to declare that kernel space FPU support is available. Architectures selecting this option must implement what is currently the most common API (kernel_fpu_begin() and kernel_fpu_end(), plus a new function kernel_fpu_available()) and provide the appropriate CFLAGS for compiling floating-point C code. Link: https://lkml.kernel.org/r/20240329072441.591471-2-samuel.holland@sifive.com Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: WANG Xuerui <git@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (IBM)
|
7582b7be16 |
kprobes: remove dependency on CONFIG_MODULES
kprobes depended on CONFIG_MODULES because it has to allocate memory for code. Since code allocations are now implemented with execmem, kprobes can be enabled in non-modular kernels. Add #ifdef CONFIG_MODULE guards for the code dealing with kprobes inside modules, make CONFIG_KPROBES select CONFIG_EXECMEM and drop the dependency of CONFIG_KPROBES on CONFIG_MODULES. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> [mcgrof: rebase in light of NEED_TASKS_RCU ] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Mike Rapoport (IBM)
|
223b5e57d0 |
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
Extend execmem parameters to accommodate more complex overrides of module_alloc() by architectures. This includes specification of a fallback range required by arm, arm64 and powerpc, EXECMEM_MODULE_DATA type required by powerpc, support for allocation of KASAN shadow required by s390 and x86 and support for late initialization of execmem required by arm64. The core implementation of execmem_alloc() takes care of suppressing warnings when the initial allocation fails but there is a fallback range defined. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Song Liu <song@kernel.org> Tested-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Linus Torvalds
|
92f74f7f40 |
execve updates for 6.10-rc1
- Provide knob to change (previously fixed) coredump NOTES size (Allen Pais) - Add sched_prepare_exec tracepoint (Marco Elver) - Make /proc/$pid/auxv work under binfmt_elf_fdpic (Max Filippov) - Convert ARCH_HAVE_EXTRA_ELF_NOTES to proper Kconfig (Vignesh Balasubramanian) - Leave a gap between .bss and brk -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmY/xb8WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJvVnEACTW/db647prqm9FsoPB0rjjNIu JM50Z7M1Euj8FN/v4p7QjFY2v0vwk8XLfOVNncqvl0BCoAWuNVbt+tFdz0Teguza nIkMuJrtRA5q0dKaM49HiIABpEIZSpJuWwYiJhyZ5KIxc5KdzHmI7HrZDNO0ISgO iwIzAfW/2PrpsdY7Eq20gyVlSWIUZxe7gAUN/WIMn3JaYT+7d+D8pnNz8IGOrKR/ Xe9Gq1S0+8KUOJbxNsrdIA688dYsyS1XhadrOc0MPxOOyvQFein0pE6JfZRB+oLi p3FfECZgHhmvswaNeDKtLyfI0q7tXnlQugLuueRGNEJNMln0EUe813qRQvimMOWc cQY8lqN7uEIynhZZLoRxWcRFWmJ71Af32RkRdlM47+Vmv9CdHO/VCVaI9GIObx5Z DwtUlE28sz2J5xlnysm6zUxyeZibGYumFgHIUrjZR+fNgpYp8CggbKpWorI7dlaq UmJlziWLkXJmHzTv+AoaktRKbfDbpE1M3ym1KeA5y9KuEH+FejamBigGPzo+t9O7 TA2AgP5N8Fjs/dzUE0yqrQMxnjjCEXWKvPQA0A0CmyFbK9Xb0TJ6OmYcodKbmG7y /z9n01rnuK/UtXiyGfnwxbcKKOqC3wRepyw1wc8eX8pwuERUw+ztyTOyMdaxq+Ba mONnCNda7XD+wzoA7g== =GNfU -----END PGP SIGNATURE----- Merge tag 'execve-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Provide knob to change (previously fixed) coredump NOTES size (Allen Pais) - Add sched_prepare_exec tracepoint (Marco Elver) - Make /proc/$pid/auxv work under binfmt_elf_fdpic (Max Filippov) - Convert ARCH_HAVE_EXTRA_ELF_NOTES to proper Kconfig (Vignesh Balasubramanian) - Leave a gap between .bss and brk * tag 'execve-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: fs/coredump: Enable dynamic configuration of max file note size binfmt_elf_fdpic: fix /proc/<pid>/auxv binfmt_elf: Leave a gap between .bss and brk Replace macro "ARCH_HAVE_EXTRA_ELF_NOTES" with kconfig tracing: Add sched_prepare_exec tracepoint |
||
|
Linus Torvalds
|
2e57d1d606 |
sparc32,parisc,csky: Provide one-byte and two-byte cmpxchg() support
This series provides native one-byte and two-byte cmpxchg() support
for sparc32 and parisc, courtesy of Al Viro. This support is provided
by the same hashed-array-of-locks technique used for the other atomic
operations provided for these two platforms.
This series also provides emulated one-byte cmpxchg() support for csky
using a new cmpxchg_emu_u8() function that uses a four-byte cmpxchg()
to emulate the one-byte variant.
Similar patches for emulation of one-byte cmpxchg() for arc, sh, and
xtensa have not yet received maintainer acks, so they are slated for
the v6.11 merge window.
-----BEGIN PGP SIGNATURE-----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=AEPy
-----END PGP SIGNATURE-----
Merge tag 'cmpxchg.2024.05.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull cmpxchg updates from Paul McKenney:
"Provide one-byte and two-byte cmpxchg() support on sparc32, parisc,
and csky
This provides native one-byte and two-byte cmpxchg() support for
sparc32 and parisc, courtesy of Al Viro. This support is provided by
the same hashed-array-of-locks technique used for the other atomic
operations provided for these two platforms.
There is also emulated one-byte cmpxchg() support for csky using a new
cmpxchg_emu_u8() function that uses a four-byte cmpxchg() to emulate
the one-byte variant.
Similar patches for emulation of one-byte cmpxchg() for arc, sh, and
xtensa have not yet received maintainer acks, so they are slated for
the v6.11 merge window"
* tag 'cmpxchg.2024.05.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
csky: Emulate one-byte cmpxchg
lib: Add one-byte emulation function
parisc: add u16 support to cmpxchg()
parisc: add missing export of __cmpxchg_u8()
parisc: unify implementations of __cmpxchg_u{8,32,64}
parisc: __cmpxchg_u32(): lift conversion into the callers
sparc32: add __cmpxchg_u{8,16}() and teach __cmpxchg() to handle those sizes
sparc32: unify __cmpxchg_u{32,64}
sparc32: make the first argument of __cmpxchg_u64() volatile u64 *
sparc32: make __cmpxchg_u32() return u32
|
||
|
Linus Torvalds
|
c0b9620bc3 |
RCU pull request for v6.10
This pull request contains the following branches: fixes.2024.04.15a: Fix a lockdep complain for lazy-preemptible kernel, remove redundant BH disable for TINY_RCU, remove redundant READ_ONCE() in tree.c, fix false positives KCSAN splat and fix buffer overflow in the print_cpu_stall_info(). misc.2024.04.12a: Misc updates related to bpf, tracing and update the MAINTAINERS file. rcu-sync-normal-improve.2024.04.15a: An improvement of a normal synchronize_rcu() call in terms of latency. It maintains a separate track for sync. users only. This approach bypasses per-cpu nocb-lists thus sync-users do not depend on nocb-list length and how fast regular callbacks are processed. rcu-tasks.2024.04.15a: RCU tasks, switch tasks RCU grace periods to sleep at TASK_IDLE priority, fix some comments, add some diagnostic warning to the exit_tasks_rcu_start() and fix a buffer overflow in the show_rcu_tasks_trace_gp_kthread(). rcutorture.2024.04.15a: Increase memory to guest OS, fix a Tasks Rude RCU testing, some updates for TREE09, dump mode information to debug GP kthread state, remove redundant READ_ONCE(), fix some comments about RCU_TORTURE_PIPE_LEN and pipe_count, remove some redundant pointer initialization, fix a hung splat task by when the rcutorture tests start to exit, fix invalid context warning, add '--do-kvfree' parameter to torture test and use slow register unregister callbacks only for rcutype test. -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEEu6QRe/mAUYNn5U0PBYqkjnKWLM8FAmYzsmUACgkQBYqkjnKW LM/FAwv+LcIJ9lO/wzUpnH3d3djBOPmyu7Us8ERNY5lcVZ+neS2m3vxq0kOk/cnV RGgZc7qjWqMQ9hAx/MmIodmiw036ceRDe5CP/Ec/TYx68m+NPG3VnP08s/xLXLlx n8aSJJu37y0ElMQMwvuQaoNJ2xqlZ8AHCR6iaqJtzmPBR6zHLyeCPVpdPJQfcSO7 +9ABzqo8isGxeuaAE7y0WUp0ZsSpdYvdext5SStjtvZ+hKERdVluhBF+OxZIZByp RSBoZJrbTKKpzTUBSE0ci+mlfqBPmSVjjqvygscuwOoKhm+601E51DYb1QXkGujq vuc1f/c7VjTAXyvs9k4An2x3XcN5SFhA6Bhc+L6aU/UJBzAWrJJkVOwS79gHNSn1 qshyhpDLE8MiBEi0QxaEmBZLkz3BX1aYbQA0+5wvgoz0u8QglrpRrPRIWUWC0wvq SOLIibZkJuPUOZuD5AP4tg80swTuSCvyWuiKUVRnJK9FsYKdcyNUCnOLIwUzQlrg 1/hatlvS =cq8V -----END PGP SIGNATURE----- Merge tag 'rcu.next.v6.10' of https://github.com/urezki/linux Pull RCU updates from Uladzislau Rezki: - Fix a lockdep complain for lazy-preemptible kernel, remove redundant BH disable for TINY_RCU, remove redundant READ_ONCE() in tree.c, fix false positives KCSAN splat and fix buffer overflow in the print_cpu_stall_info(). - Misc updates related to bpf, tracing and update the MAINTAINERS file. - An improvement of a normal synchronize_rcu() call in terms of latency. It maintains a separate track for sync. users only. This approach bypasses per-cpu nocb-lists thus sync-users do not depend on nocb-list length and how fast regular callbacks are processed. - RCU tasks: switch tasks RCU grace periods to sleep at TASK_IDLE priority, fix some comments, add some diagnostic warning to the exit_tasks_rcu_start() and fix a buffer overflow in the show_rcu_tasks_trace_gp_kthread(). - RCU torture: Increase memory to guest OS, fix a Tasks Rude RCU testing, some updates for TREE09, dump mode information to debug GP kthread state, remove redundant READ_ONCE(), fix some comments about RCU_TORTURE_PIPE_LEN and pipe_count, remove some redundant pointer initialization, fix a hung splat task by when the rcutorture tests start to exit, fix invalid context warning, add '--do-kvfree' parameter to torture test and use slow register unregister callbacks only for rcutype test. * tag 'rcu.next.v6.10' of https://github.com/urezki/linux: (48 commits) rcutorture: Use rcu_gp_slow_register/unregister() only for rcutype test torture: Scale --do-kvfree test time rcutorture: Fix invalid context warning when enable srcu barrier testing rcutorture: Make stall-tasks directly exit when rcutorture tests end rcutorture: Removing redundant function pointer initialization rcutorture: Make rcutorture support print rcu-tasks gp state rcutorture: Use the gp_kthread_dbg operation specified by cur_ops rcutorture: Re-use value stored to ->rtort_pipe_count instead of re-reading rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment rcutorture: Remove extraneous rcu_torture_pipe_update_one() READ_ONCE() rcu: Allocate WQ with WQ_MEM_RECLAIM bit set rcu: Support direct wake-up of synchronize_rcu() users rcu: Add a trace event for synchronize_rcu_normal() rcu: Reduce synchronize_rcu() latency rcu: Fix buffer overflow in print_cpu_stall_info() rcu: Mollify sparse with RCU guard rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow rcu-tasks: Fix the comments for tasks_rcu_exit_srcu_stall_timer rcu-tasks: Replace exit_tasks_rcu_start() initialization with WARN_ON_ONCE() rcu: Remove redundant CONFIG_PROVE_RCU #if condition ... |
||
|
Sean Christopherson
|
fe42754b94 |
cpu: Re-enable CPU mitigations by default for !X86 architectures
Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it
on for all architectures exception x86. A recent commit to turn
mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta
missed that "cpu_mitigations" is completely generic, whereas
SPECULATION_MITIGATIONS is x86-specific.
Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it
select CPU_MITIGATIONS, as having two configs for the same thing is
unnecessary and confusing. This will also allow x86 to use the knob to
manage mitigations that aren't strictly related to speculative
execution.
Use another Kconfig to communicate to common code that CPU_MITIGATIONS
is already defined instead of having x86's menu depend on the common
CPU_MITIGATIONS. This allows keeping a single point of contact for all
of x86's mitigations, and it's not clear that other architectures *want*
to allow disabling mitigations at compile-time.
Fixes:
|
||
|
Vignesh Balasubramanian
|
a9c3475dd6 |
Replace macro "ARCH_HAVE_EXTRA_ELF_NOTES" with kconfig
"ARCH_HAVE_EXTRA_ELF_NOTES" enables an extra note section in the core dump. Kconfig variable is preferred over ARCH_HAVE_* macro. Co-developed-by: Jini Susan George <jinisusan.george@amd.com> Signed-off-by: Jini Susan George <jinisusan.george@amd.com> Signed-off-by: Vignesh Balasubramanian <vigbalas@amd.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20240412062138.1132841-2-vigbalas@amd.com Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Linus Torvalds
|
d5cf50dafc |
Kconfig: add some hidden tabs on purpose
Commit |
||
|
Paul E. McKenney
|
a88d970c8b |
lib: Add one-byte emulation function
Architectures are required to provide four-byte cmpxchg() and 64-bit architectures are additionally required to provide eight-byte cmpxchg(). However, there are cases where one-byte cmpxchg() would be extremely useful. Therefore, provide cmpxchg_emu_u8() that emulates one-byte cmpxchg() in terms of four-byte cmpxchg(). Note that this emulations is fully ordered, and can (for example) cause one-byte cmpxchg_relaxed() to incur the overhead of full ordering. If this causes problems for a given architecture, that architecture is free to provide its own lighter-weight primitives. [ paulmck: Apply Marco Elver feedback. ] [ paulmck: Apply kernel test robot feedback. ] [ paulmck: Drop two-byte support per Arnd Bergmann feedback. ] Link: https://lore.kernel.org/all/0733eb10-5e7a-4450-9b8a-527b97c842ff@paulmck-laptop/ Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Marco Elver <elver@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <linux-arch@vger.kernel.org> |
||
|
Paul E. McKenney
|
900da4d2a5 |
arch: Select new NEED_TASKS_RCU Kconfig option
Currently, if a Kconfig option depends on TASKS_RCU, it conditionally does "select TASKS_RCU if PREEMPTION". This works, but requires any change in this enablement logic to be replicated across all such "select" clauses. A new NEED_TASKS_RCU Kconfig option has been created to allow this enablement logic to be in one place in kernel/rcu/Kconfig. Therefore, select the new NEED_TASKS_RCU Kconfig option instead of the old TASKS_RCU option. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Douglas Anderson <dianders@chromium.org> Cc: Ankur Arora <ankur.a.arora@oracle.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> |
||
|
Linus Torvalds
|
b71871395c |
hardening fixes for v6.9-rc1
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck) - Fix needless UTF-8 character in arch/Kconfig (Liu Song) - Improve __counted_by warning message in LKDTM (Nathan Chancellor) - Refactor DEFINE_FLEX() for default use of __counted_by - Disable signed integer overflow sanitizer on GCC < 8 -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmX+Gj8WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJg1fD/4zrQ3MmMpK/GaNCziayLuCJiMu urS85FkRaGkmf3d3PDVVOBw5wFae408O+i4a1b10k2L/At79Z5oi/RqKYtPXthGr davVIJt+ZBuTC5l7jUHeK6XAJ/8/28Xsq4dMQjy7pUstYU14sl2a1z+IuV7I+jxm hlVqvj7Q0dsPijyF9YAuoWhvXIGs3/p6oaq/p4+p0sGpbbjNEpNka9qgR9vl1NFe WrByHrFMxl6gmLPTilNvgdD50id4x7OYEtROdDP8tXK+dx8YGaEXAuPzYkpzmuOb 9UjhGitxRX6VfWBy7N/TWtDryV493Jq2VFVsrEc2zNr2HR34/vTYCjMyfLlJNXVu hD3vZ/tO2tDnDhBeMKigIsbTtev4qn60IElmc4BXudgVbWehjVsJk+kGbKEIkIy6 ww7vF4OPWEKNTBVsDtFJwKNZixb/NMX3nS1xCALffzNgh3o8qP28gESOKImHeKhI U7ZhoWLob3ayEcjCVhCaBEC+fK9a5Eva6L5lTUoObPqzXwoysi2yGEQTqHlYwdfg unQuZUaiWEE9w1GG7CEx5xB9VmaY2U9bF7thUw6qMNmvCzqJr2goUcJ8E6y90s4w fR71YYkfYsXMuL1MnxCp/xOS5EbodYWskyLicNee7SlBAqInraaQG8syBGUFb+4S zvILMp7Zc1sBIxhATA== =1LW2 -----END PGP SIGNATURE----- Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more hardening updates from Kees Cook: - CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck) - Fix needless UTF-8 character in arch/Kconfig (Liu Song) - Improve __counted_by warning message in LKDTM (Nathan Chancellor) - Refactor DEFINE_FLEX() for default use of __counted_by - Disable signed integer overflow sanitizer on GCC < 8 * tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm/bugs: Improve warning message for compilers without counted_by support overflow: Change DEFINE_FLEX to take __counted_by member Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST" arch/Kconfig: eliminate needless UTF-8 character in Kconfig help ubsan: Disable signed integer overflow sanitizer on GCC < 8 |
||
|
Linus Torvalds
|
1d35aae78f |
Kbuild updates for v6.9
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
-----BEGIN PGP SIGNATURE-----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=tFdl
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
||
|
Liu Song
|
c4ca2276f1 |
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
Use "find ./linux/* | grep Kconfig | xargs file | grep UTF", can find files with utf-8 encoded characters, these files will display garbled characters in menuconfig, except for characters with special meanings that cannot be modified, modify the characters with obvious errors to eliminate the wrong display under meunconfig. Signed-off-by: Liu Song <liusong@linux.alibaba.com> Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/lkml/1659435153-119538-1-git-send-email-liusong@linux.alibaba.com/ Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Arnd Bergmann
|
ba89f9c8cc |
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
These four architectures define the same Kconfig symbols for configuring the page size. Move the logic into a common place where it can be shared with all other architectures. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Petr Pavlu
|
5270316c9f |
kbuild: Use -fmin-function-alignment when available
GCC recently added option -fmin-function-alignment, which should appear in GCC 14. Unlike -falign-functions, this option causes all functions to be aligned at the specified value, including the cold ones. In particular, when an arm64 kernel is built with DYNAMIC_FTRACE_WITH_CALL_OPS=y, the 8-byte function alignment is required for correct functionality. This was done by -falign-functions=8 and having workarounds in the kernel to force the compiler to follow this alignment. The new -fmin-function-alignment option directly guarantees it. Detect availability of -fmin-function-alignment and use it instead of -falign-functions when present. Introduce CC_HAS_SANE_FUNCTION_ALIGNMENT and enable __cold to work as expected when it is set. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Samuel Holland
|
6f9dc684ca |
scs: add CONFIG_MMU dependency for vfree_atomic()
The shadow call stack implementation fails to build without CONFIG_MMU:
ld.lld: error: undefined symbol: vfree_atomic
>>> referenced by scs.c
>>> kernel/scs.o:(scs_free) in archive vmlinux.a
Link: https://lkml.kernel.org/r/20240122175204.2371009-1-samuel.holland@sifive.com
Fixes:
|
||
|
Linus Torvalds
|
0dde2bf67b |
IOMMU Updates for Linux v6.8
Including:
- Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to
a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
- ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm SMMU
implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
- Intel VT-d driver:
- Cleanup and refactoring
- AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
- Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
- Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
- Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes
-----BEGIN PGP SIGNATURE-----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=q751
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
|
||
|
Linus Torvalds
|
9f2a635235 |
Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
conversions for file paths".
- Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
Folio conversions for directory paths".
- IA64 remnant removal in Heiko Carstens's "Remove unused code after
IA-64 removal".
- Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
in "Treewide: enable -Wmissing-prototypes". This had some followup
fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
"hexagon: Fix up instances of -Wmissing-prototypes".
- Nathan also addressed some s390 warnings in "s390: A couple of
fixes for -Wmissing-prototypes".
- Arnd Bergmann addresses the same warnings for MIPS in his series
"mips: address -Wmissing-prototypes warnings".
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series "kexec_file: Load kernel at top of
system RAM if required"
- Baoquan He has also added the self-explanatory "kexec_file: print out
debugging message if required".
- Some checkstack maintenance work from Tiezhu Yang in the series
"Modify some code about checkstack".
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is "watchdog:
Better handling of concurrent lockups".
- Yuntao Wang has contributed some maintenance work on the crash code in
"crash: Some cleanups and fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
=kQw+
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
||
|
Kinsey Ho
|
71ce1ab54a |
mm/mglru: add CONFIG_ARCH_HAS_HW_PTE_YOUNG
Patch series "mm/mglru: Kconfig cleanup", v4.
This series is the result of the following discussion:
https://lore.kernel.org/47066176-bd93-55dd-c2fa-002299d9e034@linux.ibm.com/
It mainly avoids building the code that walks page tables on CPUs that
use it, i.e., those don't support hardware accessed bit. Specifically,
it introduces a new Kconfig to guard some of functions added by
commit
|
||
|
Jason Gunthorpe
|
8f23f5dba6 |
iommu: Change kconfig around IOMMU_SVA
Linus suggested that the kconfig here is confusing: https://lore.kernel.org/all/CAHk-=wgUiAtiszwseM1p2fCJ+sC4XWQ+YN4TanFhUgvUqjr9Xw@mail.gmail.com/ Let's break it into three kconfigs controlling distinct things: - CONFIG_IOMMU_MM_DATA controls if the mm_struct has the additional fields for the IOMMU. Currently only PASID, but later patches store a struct iommu_mm_data * - CONFIG_ARCH_HAS_CPU_PASID controls if the arch needs the scheduling bit for keeping track of the ENQCMD instruction. x86 will select this if IOMMU_SVA is enabled - IOMMU_SVA controls if the IOMMU core compiles in the SVA support code for iommu driver use and the IOMMU exported API This way ARM will not enable CONFIG_ARCH_HAS_CPU_PASID Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20231027000525.1278806-2-tina.zhang@intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Heiko Carstens
|
0eb5085c38 |
arch: remove ARCH_TASK_STRUCT_ON_STACK
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ON_STACK. IA-64 was removed with commit |
||
|
Heiko Carstens
|
3888750e21 |
arch: remove ARCH_TASK_STRUCT_ALLOCATOR
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ALLOCATOR.
IA-64 was removed with commit
|
||
|
Heiko Carstens
|
f72709ab69 |
arch: remove ARCH_THREAD_STACK_ALLOCATOR
Patch series "Remove unused code after IA-64 removal".
While looking into something different I noticed that there are a couple
of Kconfig options which were only selected by IA-64 and which are now
unused.
So remove them and simplify the code a bit.
This patch (of 3):
IA-64 was the only architecture which selected ARCH_THREAD_STACK_ALLOCATOR.
IA-64 was removed with commit
|
||
|
Ard Biesheuvel
|
cf8e865810 |
arch: Remove Itanium (IA-64) architecture
The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Linus Torvalds
|
df57721f9a |
Add x86 shadow stack support
Convert IBT selftest to asm to fix objtool warning -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTv1QQACgkQaDWVMHDJ krAUwhAAn6TOwHJK8BSkHeiQhON1nrlP3c5cv0AyZ2NP8RYDrZrSZvhpYBJ6wgKC Cx5CGq5nn9twYsYS3KsktLKDfR3lRdsQ7K9qtyFtYiaeaVKo+7gEKl/K+klwai8/ gninQWHk0zmSCja8Vi77q52WOMkQKapT8+vaON9EVDO8dVEi+CvhAIfPwMafuiwO Rk4X86SzoZu9FP79LcCg9XyGC/XbM2OG9eNUTSCKT40qTTKm5y4gix687NvAlaHR ko5MTsdl0Wfp6Qk0ohT74LnoA2c1g/FluvZIM33ci/2rFpkf9Hw7ip3lUXqn6CPx rKiZ+pVRc0xikVWkraMfIGMJfUd2rhelp8OyoozD7DB7UZw40Q4RW4N5tgq9Fhe9 MQs3p1v9N8xHdRKl365UcOczUxNAmv4u0nV5gY/4FMC6VjldCl2V9fmqYXyzFS4/ Ogg4FSd7c2JyGFKPs+5uXyi+RY2qOX4+nzHOoKD7SY616IYqtgKoz5usxETLwZ6s VtJOmJL0h//z0A7tBliB0zd+SQ5UQQBDC2XouQH2fNX2isJMn0UDmWJGjaHgK6Hh 8jVp6LNqf+CEQS387UxckOyj7fu438hDky1Ggaw4YqowEOhQeqLVO4++x+HITrbp AupXfbJw9h9cMN63Yc0gVxXQ9IMZ+M7UxLtZ3Cd8/PVztNy/clA= =3UUm -----END PGP SIGNATURE----- Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 shadow stack support from Dave Hansen: "This is the long awaited x86 shadow stack support, part of Intel's Control-flow Enforcement Technology (CET). CET consists of two related security features: shadow stacks and indirect branch tracking. This series implements just the shadow stack part of this feature, and just for userspace. The main use case for shadow stack is providing protection against return oriented programming attacks. It works by maintaining a secondary (shadow) stack using a special memory type that has protections against modification. When executing a CALL instruction, the processor pushes the return address to both the normal stack and to the special permission shadow stack. Upon RET, the processor pops the shadow stack copy and compares it to the normal stack copy. For more information, refer to the links below for the earlier versions of this patch set" Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/ Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/ * tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/shstk: Change order of __user in type x86/ibt: Convert IBT selftest to asm x86/shstk: Don't retry vm_munmap() on -EINTR x86/kbuild: Fix Documentation/ reference x86/shstk: Move arch detail comment out of core mm x86/shstk: Add ARCH_SHSTK_STATUS x86/shstk: Add ARCH_SHSTK_UNLOCK x86: Add PTRACE interface for shadow stack selftests/x86: Add shadow stack test x86/cpufeatures: Enable CET CR4 bit for shadow stack x86/shstk: Wire in shadow stack interface x86: Expose thread features in /proc/$PID/status x86/shstk: Support WRSS for userspace x86/shstk: Introduce map_shadow_stack syscall x86/shstk: Check that signal frame is shadow stack mem x86/shstk: Check that SSP is aligned on sigreturn x86/shstk: Handle signals for shadow stack x86/shstk: Introduce routines modifying shstk x86/shstk: Handle thread shadow stack x86/shstk: Add user-mode shadow stack support ... |
||
|
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
||
|
Jakob Koschel
|
349fde599d |
arch: enable HAS_LTO_CLANG with KASAN and KCOV
Both KASAN and KCOV had issues with LTO_CLANG if DEBUG_INFO is enabled. With LTO inlinable function calls are required to have debug info if they are inlined into a function that has debug info. Starting with LLVM 17 this will be fixed ([1],[2]) and enabling LTO with KASAN/KCOV and DEBUG_INFO doesn't cause linker errors anymore. Link: |
||
|
Eric DeVolder
|
89cde45591 |
kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
Patch series "refactor Kconfig to consolidate KEXEC and CRASH options", v6. The Kconfig is refactored to consolidate KEXEC and CRASH options from various arch/<arch>/Kconfig files into new file kernel/Kconfig.kexec. The Kconfig.kexec is now a submenu titled "Kexec and crash features" located under "General Setup". The following options are impacted: - KEXEC - KEXEC_FILE - KEXEC_SIG - KEXEC_SIG_FORCE - KEXEC_IMAGE_VERIFY_SIG - KEXEC_BZIMAGE_VERIFY_SIG - KEXEC_JUMP - CRASH_DUMP Over time, these options have been copied between Kconfig files and are very similar to one another, but with slight differences. The following architectures are impacted by the refactor (because of use of one or more KEXEC/CRASH options): - arm - arm64 - ia64 - loongarch - m68k - mips - parisc - powerpc - riscv - s390 - sh - x86 More information: In the patch series "crash: Kernel handling of CPU and memory hot un/plug" https://lore.kernel.org/lkml/20230503224145.7405-1-eric.devolder@oracle.com/ the new kernel feature introduces the config option CRASH_HOTPLUG. In reviewing, Thomas Gleixner requested that the new config option not be placed in x86 Kconfig. Rather the option needs a generic/common home. To Thomas' point, the KEXEC and CRASH options have largely been duplicated in the various arch/<arch>/Kconfig files, with minor differences. This kind of proliferation is to be avoid/stopped. https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/ To that end, I have refactored the arch Kconfigs so as to consolidate the various KEXEC and CRASH options. Generally speaking, this work has the following themes: - KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec - These items from arch/Kconfig: CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC - These items from arch/x86/Kconfig form the common options: KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP - These items from arch/arm64/Kconfig form the common options: KEXEC_IMAGE_VERIFY_SIG - The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec - The Kconfig.kexec is now a submenu titled "Kexec and crash features" and is now listed in "General Setup" submenu from init/Kconfig. - To control the common options, each has a new ARCH_SUPPORTS_<option> option. These gateway options determine whether the common options options are valid for the architecture. - To account for the slight differences in the original architecture coding of the common options, each now has a corresponding ARCH_SELECTS_<option> which are used to elicit the same side effects as the original arch/<arch>/Kconfig files for KEXEC and CRASH options. An example, 'make menuconfig' illustrating the submenu: > General setup > Kexec and crash features [*] Enable kexec system call [*] Enable kexec file based system call [*] Verify kernel signature during kexec_file_load() syscall [ ] Require a valid signature in kexec_file_load() syscall [ ] Enable bzImage signature verification support [*] kexec jump [*] kernel crash dumps [*] Update the crash elfcorehdr on system configuration changes In the process of consolidating the common options, I encountered slight differences in the coding of these options in several of the architectures. As a result, I settled on the following solution: - Each of the common options has a 'depends on ARCH_SUPPORTS_<option>' statement. For example, the KEXEC_FILE option has a 'depends on ARCH_SUPPORTS_KEXEC_FILE' statement. This approach is needed on all common options so as to prevent options from appearing for architectures which previously did not allow/enable them. For example, arm supports KEXEC but not KEXEC_FILE. The arch/arm/Kconfig does not provide ARCH_SUPPORTS_KEXEC_FILE and so KEXEC_FILE and related options are not available to arm. - The boolean ARCH_SUPPORTS_<option> in effect allows the arch to determine when the feature is allowed. Archs which don't have the feature simply do not provide the corresponding ARCH_SUPPORTS_<option>. For each arch, where there previously were KEXEC and/or CRASH options, these have been replaced with the corresponding boolean ARCH_SUPPORTS_<option>, and an appropriate def_bool statement. For example, if the arch supports KEXEC_FILE, then the ARCH_SUPPORTS_KEXEC_FILE simply has a 'def_bool y'. This permits the KEXEC_FILE option to be available. If the arch has a 'depends on' statement in its original coding of the option, then that expression becomes part of the def_bool expression. For example, arm64 had: config KEXEC depends on PM_SLEEP_SMP and in this solution, this converts to: config ARCH_SUPPORTS_KEXEC def_bool PM_SLEEP_SMP - In order to account for the architecture differences in the coding for the common options, the ARCH_SELECTS_<option> in the arch/<arch>/Kconfig is used. This option has a 'depends on <option>' statement to couple it to the main option, and from there can insert the differences from the common option and the arch original coding of that option. For example, a few archs enable CRYPTO and CRYTPO_SHA256 for KEXEC_FILE. These require a ARCH_SELECTS_KEXEC_FILE and 'select CRYPTO' and 'select CRYPTO_SHA256' statements. Illustrating the option relationships: For each of the common KEXEC and CRASH options: ARCH_SUPPORTS_<option> <- <option> <- ARCH_SELECTS_<option> <option> # in Kconfig.kexec ARCH_SUPPORTS_<option> # in arch/<arch>/Kconfig, as needed ARCH_SELECTS_<option> # in arch/<arch>/Kconfig, as needed For example, KEXEC: ARCH_SUPPORTS_KEXEC <- KEXEC <- ARCH_SELECTS_KEXEC KEXEC # in Kconfig.kexec ARCH_SUPPORTS_KEXEC # in arch/<arch>/Kconfig, as needed ARCH_SELECTS_KEXEC # in arch/<arch>/Kconfig, as needed To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be enabled, and the ARCH_SELECTS_<option> handles side effects (ie. select statements). Examples: A few examples to show the new strategy in action: ===== x86 (minus the help section) ===== Original: config KEXEC bool "kexec system call" select KEXEC_CORE config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE select HAVE_IMA_KEXEC if IMA depends on X86_64 depends on CRYPTO=y depends on CRYPTO_SHA256=y config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE config KEXEC_SIG bool "Verify kernel signature during kexec_file_load() syscall" depends on KEXEC_FILE config KEXEC_SIG_FORCE bool "Require a valid signature in kexec_file_load() syscall" depends on KEXEC_SIG config KEXEC_BZIMAGE_VERIFY_SIG bool "Enable bzImage signature verification support" depends on KEXEC_SIG depends on SIGNED_PE_FILE_VERIFICATION select SYSTEM_TRUSTED_KEYRING config CRASH_DUMP bool "kernel crash dumps" depends on X86_64 || (X86_32 && HIGHMEM) config KEXEC_JUMP bool "kexec jump" depends on KEXEC && HIBERNATION help becomes... New: config ARCH_SUPPORTS_KEXEC def_bool y config ARCH_SUPPORTS_KEXEC_FILE def_bool X86_64 && CRYPTO && CRYPTO_SHA256 config ARCH_SELECTS_KEXEC_FILE def_bool y depends on KEXEC_FILE select HAVE_IMA_KEXEC if IMA config ARCH_SUPPORTS_KEXEC_PURGATORY def_bool KEXEC_FILE config ARCH_SUPPORTS_KEXEC_SIG def_bool y config ARCH_SUPPORTS_KEXEC_SIG_FORCE def_bool y config ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG def_bool y config ARCH_SUPPORTS_KEXEC_JUMP def_bool y config ARCH_SUPPORTS_CRASH_DUMP def_bool X86_64 || (X86_32 && HIGHMEM) ===== powerpc (minus the help section) ===== Original: config KEXEC bool "kexec system call" depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP) select KEXEC_CORE config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE select HAVE_IMA_KEXEC if IMA select KEXEC_ELF depends on PPC64 depends on CRYPTO=y depends on CRYPTO_SHA256=y config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE config CRASH_DUMP bool "Build a dump capture kernel" depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP) select RELOCATABLE if PPC64 || 44x || PPC_85xx becomes... New: config ARCH_SUPPORTS_KEXEC def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP) config ARCH_SUPPORTS_KEXEC_FILE def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y config ARCH_SUPPORTS_KEXEC_PURGATORY def_bool KEXEC_FILE config ARCH_SELECTS_KEXEC_FILE def_bool y depends on KEXEC_FILE select KEXEC_ELF select HAVE_IMA_KEXEC if IMA config ARCH_SUPPORTS_CRASH_DUMP def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP) config ARCH_SELECTS_CRASH_DUMP def_bool y depends on CRASH_DUMP select RELOCATABLE if PPC64 || 44x || PPC_85xx Testing Approach and Results There are 388 config files in the arch/<arch>/configs directories. For each of these config files, a .config is generated both before and after this Kconfig series, and checked for equivalence. This approach allows for a rather rapid check of all architectures and a wide variety of configs wrt/ KEXEC and CRASH, and avoids requiring compiling for all architectures and running kernels and run-time testing. For each config file, the olddefconfig, allnoconfig and allyesconfig targets are utilized. In testing the randconfig has revealed problems as well, but is not used in the before and after equivalence check since one can not generate the "same" .config for before and after, even if using the same KCONFIG_SEED since the option list is different. As such, the following script steps compare the before and after of 'make olddefconfig'. The new symbols introduced by this series are filtered out, but otherwise the config files are PASS only if they were equivalent, and FAIL otherwise. The script performs the test by doing the following: # Obtain the "golden" .config output for given config file # Reset test sandbox git checkout master git branch -D test_Kconfig git checkout -B test_Kconfig master make distclean # Write out updated config cp -f <config file> .config make ARCH=<arch> olddefconfig # Track each item in .config, LHSB is "golden" scoreboard .config # Obtain the "changed" .config output for given config file # Reset test sandbox make distclean # Apply this Kconfig series git am <this Kconfig series> # Write out updated config cp -f <config file> .config make ARCH=<arch> olddefconfig # Track each item in .config, RHSB is "changed" scoreboard .config # Determine test result # Filter-out new symbols introduced by this series # Filter-out symbol=n which not in either scoreboard # Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL The script was instrumental during the refactoring of Kconfig as it continually revealed problems. The end result being that the solution presented in this series passes all configs as checked by the script, with the following exceptions: - arch/ia64/configs/zx1_config with olddefconfig This config file has: # CONFIG_KEXEC is not set CONFIG_CRASH_DUMP=y and this refactor now couples KEXEC to CRASH_DUMP, so it is not possible to enable CRASH_DUMP without KEXEC. - arch/sh/configs/* with allyesconfig The arch/sh/Kconfig codes CRASH_DUMP as dependent upon BROKEN_ON_MMU (which clearly is not meant to be set). This symbol is not provided but with the allyesconfig it is set to yes which enables CRASH_DUMP. But KEXEC is coded as dependent upon MMU, and is set to no in arch/sh/mm/Kconfig, so KEXEC is not enabled. This refactor now couples KEXEC to CRASH_DUMP, so it is not possible to enable CRASH_DUMP without KEXEC. While the above exceptions are not equivalent to their original, the config file produced is valid (and in fact better wrt/ CRASH_DUMP handling). This patch (of 14) The config options for kexec and crash features are consolidated into new file kernel/Kconfig.kexec. Under the "General Setup" submenu is a new submenu "Kexec and crash handling". All the kexec and crash options that were once in the arch-dependent submenu "Processor type and features" are now consolidated in the new submenu. The following options are impacted: - KEXEC - KEXEC_FILE - KEXEC_SIG - KEXEC_SIG_FORCE - KEXEC_BZIMAGE_VERIFY_SIG - KEXEC_JUMP - CRASH_DUMP The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP. Architectures specify support of certain KEXEC and CRASH features with similarly named new ARCH_SUPPORTS_<option> config options. Architectures can utilize the new ARCH_SELECTS_<option> config options to specify additional components when <option> is enabled. To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be enabled, and the ARCH_SELECTS_<option> handles side effects (ie. select statements). Link: https://lkml.kernel.org/r/20230712161545.87870-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230712161545.87870-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Cc. "H. Peter Anvin" <hpa@zytor.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> # for x86 Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Juerg Haefliger <juerg.haefliger@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marc Aurèle La France <tsi@tuyoix.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Xin Li <xin3.li@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Michael Ellerman
|
38253464bc |
cpu/SMT: Create topology_smt_thread_allowed()
Some architectures allows partial SMT states, i.e. when not all SMT threads are brought online. To support that, add an architecture helper which checks whether a given CPU is allowed to be brought online depending on how many SMT threads are currently enabled. Since this is only applicable to architecture supporting partial SMT, only these architectures should select the new configuration variable CONFIG_SMT_NUM_THREADS_DYNAMIC. For the other architectures, not supporting the partial SMT states, there is no need to define topology_cpu_smt_allowed(), the generic code assumed that all the threads are allowed or only the primary ones. Call the helper from cpu_smt_enable(), and cpu_smt_allowed() when SMT is enabled, to check if the particular thread should be onlined. Notably, also call it from cpu_smt_disable() if CPU_SMT_ENABLED, to allow offlining some threads to move from a higher to lower number of threads online. [ ldufour: Slightly reword the commit's description ] [ ldufour: Introduce CONFIG_SMT_NUM_THREADS_DYNAMIC ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20230705145143.40545-7-ldufour@linux.ibm.com |
||
|
Rick Edgecombe
|
2f0584f3f4 |
mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma()
The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(), create a new arch config HAS_HUGE_PAGE that can be used to tell if pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the compiler would not be able to find pmd_mkwrite_novma(). No functional change. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/ Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com |
||
|
Linus Torvalds
|
77b1a7f7a0 |
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories. - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs. - Zhen Lei has enhanced kexec's ability to support two crash regions. - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries. - And the usual bunch of singleton patches in various places. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU= =F293 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ... |
||
|
Linus Torvalds
|
26642864f8 |
Landlock updates for v6.5-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZJlO/xAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbS/FwA/A5GFGtKnLzFpIAXgc1G3kr8c+J/WF7RVUD+ PJNEsH6PAP41l3BTqVSeVZ+tdLSC7NbesoX0MTd+rCgAWnr+Pko2Cw== =KqpG -----END PGP SIGNATURE----- Merge tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "Add support for Landlock to UML. To do this, this fixes the way hostfs manages inodes according to the underlying filesystem [1]. They are now properly handled as for other filesystems, which enables Landlock support (and probably other features). This also extends Landlock's tests with 6 pseudo filesystems, including hostfs" [1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/ * tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add hostfs tests selftests/landlock: Add tests for pseudo filesystems selftests/landlock: Make mounts configurable selftests/landlock: Add supports_filesystem() helper selftests/landlock: Don't create useless file layouts hostfs: Fix ephemeral inodes |
||
|
Linus Torvalds
|
9244724fbf |
A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to shorten
the (kexec) reboot time of cloud servers to reduce the downtime of the
VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary() on
x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending on
the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to come
up and apply microcode. That's more than 80% of the actual onlining
procedure.
This can be reduced significantly by splitting the bringup mechanism
into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP which
needs to be brought up.
The APs wake up, do their firmware initialization and run the low
level kernel startup code including microcode loading in parallel
up to the first synchronization point. (#1 and #2 above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible in
theory, but it's questionable whether required surgery would be
justified for a pretty small gain.
If the system is large enough the first AP is already waiting at the
first synchronization point when the boot CPU finished the wake-up of
the last AP. That reduces the AP bringup time on that SKL from ~800ms
to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU, microcode
patch size and other factors. There are some opportunities to reduce
the overhead further, but that needs some deep surgery in the x86 CPU
bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to locate
the scheduling and the actual execution points. That allows to measure
IPI delivery time precisely.
-----BEGIN PGP SIGNATURE-----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=Y8if
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
|
||
|
Petr Mladek
|
a5fcc2367e |
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
There are several hardlockup detector implementations and several Kconfig values which allow selection and build of the preferred one. CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit |
||
|
Petr Mladek
|
1356d0b966 |
watchdog/hardlockup: make the config checks more straightforward
There are four possible variants of hardlockup detectors:
+ buddy: available when SMP is set.
+ perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.
+ arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
+ sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.
The check for the sparc64 variant is more complicated because
HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific
and sparc64 specific variant. Therefore it is automatically
selected with HAVE_HARDLOCKUP_DETECTOR_ARCH.
This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH.
It reduces the size of some checks but it makes them harder to follow.
Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH
is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global
HARDLOCKUP_DETECTOR switch is enabled/disabled.
Make the logic more straightforward by the following changes:
+ Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and
HAVE_NMI_WATCHDOG in comments.
+ Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate
HAVE_* for all four hardlockup detector variants.
Use it in the other conditions instead of SMP. It makes it
clear that it is about the buddy detector.
+ Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR
and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand
the conditions between the four hardlockup detector variants.
+ Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY
can be enabled. It explains the dependency on the other
hardlockup detector variants.
Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply".
It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when
the global HARDLOCKUP_DETECTOR switch is changed.
+ Add dependency on HARDLOCKUP_DETECTOR so that the affected variables
disappear when the hardlockup detectors are disabled.
Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
value is not preserved when the global switch is disabled.
The user has to make the decision again when it gets re-enabled.
Link: https://lkml.kernel.org/r/20230616150618.6073-3-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Douglas Anderson
|
6426e8d1f2 |
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
Right now there is one arch (sparc64) that selects HAVE_NMI_WATCHDOG without selecting HAVE_HARDLOCKUP_DETECTOR_ARCH. Because of that one architecture, we have some special case code in the watchdog core to handle the fact that watchdog_hardlockup_probe() isn't implemented. Let's implement watchdog_hardlockup_probe() for sparc64 and get rid of the special case. As a side effect of doing this, code inspection tells us that we could fix a minor bug where the system won't properly realize that NMI watchdogs are disabled. Specifically, on powerpc if CONFIG_PPC_WATCHDOG is turned off the arch might still select CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH which selects CONFIG_HAVE_NMI_WATCHDOG. Since CONFIG_PPC_WATCHDOG was off then nothing will override the "weak" watchdog_hardlockup_probe() and we'll fallback to looking at CONFIG_HAVE_NMI_WATCHDOG. Link: https://lkml.kernel.org/r/20230526184139.2.Ic6ebbf307ca0efe91f08ce2c1eb4a037ba6b0700@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Thomas Gleixner
|
7725acaa4f |
init: Provide arch_cpu_finalize_init()
check_bugs() has become a dumping ground for all sorts of activities to finalize the CPU initialization before running the rest of the init code. Most are empty, a few do actual bug checks, some do alternative patching and some cobble a CPU advertisement string together.... Aside of that the current implementation requires duplicated function declaration and mostly empty header files for them. Provide a new function arch_cpu_finalize_init(). Provide a generic declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub inline otherwise. This requires a temporary #ifdef in start_kernel() which will be removed along with check_bugs() once the architectures are converted over. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de |
||
|
Mickaël Salaün
|
74ce793bcb
|
hostfs: Fix ephemeral inodes
hostfs creates a new inode for each opened or created file, which created useless inode allocations and forbade identifying a host file with a kernel inode. Fix this uncommon filesystem behavior by tying kernel inodes to host file's inode and device IDs. Even if the host filesystem inodes may be recycled, this cannot happen while a file referencing it is opened, which is the case with hostfs. It should be noted that hostfs inode IDs may not be unique for the same hostfs superblock because multiple host's (backed) superblocks may be used. Delete inodes when dropping them to force backed host's file descriptors closing. This enables to entirely remove ARCH_EPHEMERAL_INODES, and then makes Landlock fully supported by UML. This is very useful for testing changes. These changes also factor out and simplify some helpers thanks to the new hostfs_inode_update() and the hostfs_iget() revamp: read_name(), hostfs_create(), hostfs_lookup(), hostfs_mknod(), and hostfs_fill_sb_common(). A following commit with new Landlock tests check this new hostfs inode consistency. Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/r/20230612191430.339153-2-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Thomas Gleixner
|
18415f33e2 |
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
There is often significant latency in the early stages of CPU bringup, and time is wasted by waking each CPU (e.g. with SIPI/INIT/INIT on x86) and then waiting for it to respond before moving on to the next. Allow a platform to enable parallel setup which brings all to be onlined CPUs up to the CPUHP_BP_KICK_AP state. While this state advancement on the control CPU (BP) is single-threaded the important part is the last state CPUHP_BP_KICK_AP which wakes the to be onlined CPUs up. This allows the CPUs to run up to the first sychronization point cpuhp_ap_sync_alive() where they wait for the control CPU to release them one by one for the full onlining procedure. This parallelism depends on the CPU hotplug core sync mechanism which ensures that the parallel brought up CPUs wait for release before touching any state which would make the CPU visible to anything outside the hotplug control mechanism. To handle the SMT constraints of X86 correctly the bringup happens in two iterations when CONFIG_HOTPLUG_SMT is enabled. The control CPU brings up the primary SMT threads of each core first, which can load the microcode without the need to rendevouz with the thread siblings. Once that's completed it brings up the secondary SMT threads. Co-developed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Helge Deller <deller@gmx.de> # parisc Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/20230512205257.240231377@linutronix.de |