The ranges description states that "at least one non-prefetchable memory
and one or both of prefetchable memory and IO space may also be provided."
However, it should not limit the maximum number of ranges to 3.
Freescale LS1028 and iMX95 use more than 3 ranges because the space splits
some discontinuous prefetchable and non-prefetchable segments.
Drop minItems and maxItems. The number of entries will be limited to 32
in pci-bus-common.yaml in dtschema, which should be sufficient.
Fixes this CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: pcie@1f0000000: ranges: [[2181038080, 1, 4160749568, 1, 4160749568, 0, 1441792], [3254779904, 1, 4162191360, 1, 4162191360, 0, 458752], [2181038080, 1, 4162650112, 1, 4162650112, 0, 131072], [3254779904, 1, 4162781184, 1, 4162781184, 0, 131072], [2181038080, 1, 4162912256, 1, 4162912256, 0, 131072], [3254779904, 1, 4163043328, 1, 4163043328, 0, 131072], [2181038080, 1, 4227858432, 1, 4227858432, 0, 4194304]] is too long
Link: https://lore.kernel.org/r/20240704164019.611454-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Add a way for firmware to tell the OS that ATS is supported by the PCI
root complex. An endpoint with ATS enabled may send Translation Requests
and Translated Memory Requests, which look just like Normal Memory
Requests with a non-zero AT field. So a root controller that ignores the
AT field may simply forward the request to the IOMMU as a Normal Memory
Request, which could end badly. In any case, the endpoint will be
unusable.
The ats-supported property allows the OS to only enable ATS in endpoints
if the root controller can handle ATS requests. Only add the property to
pcie-host-ecam-generic for the moment. For non-generic root controllers,
availability of ATS can be inferred from the compatible string.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20240607105415.2501934-3-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
dtschema package with core schemas deprecated pci-bus.yaml schema in
favor of pci-host-bridge.yaml. Update all bindings to use the latter
one.
The difference between pci-bus.yaml and pci-host-bridge.yaml is only in
lack of "reg" property defined by the latter, which should not have any
effect here, because all these bindings define the "reg".
The change is therefore quite trivial, however it requires dtschema
package v2024.02 or newer.
Link: https://lore.kernel.org/linux-pci/20240413151617.35630-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # Renesas
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Allow 'iommu-map', 'iommu-map-mask', and 'msi-parent' properties for
generic host. This fixes unevaluated property warnings on Arm Juno, AMD
Seattle, and FSL LS1028a.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220728175137.1172841-1-robh@kernel.org
This doesn't yet do anything in the tools, but make it explicit so we can
check either 'unevaluatedProperties' or 'additionalProperties' is present
in schemas.
'unevaluatedProperties' is appropriate when including another schema (via
'$ref') and all possible properties and/or child nodes are not
explicitly listed in the schema with the '$ref'.
This is in preparation to add a meta-schema to check for missing
'unevaluatedProperties' or 'additionalProperties'. This has been a
constant source of review issues.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the generic PCI host binding to DT schema. The derivative Juno,
PLDA XpressRICH3-AXI, and Designware ECAM bindings all just vary in
their compatible strings. The simplest way to convert those to
schema is just add them into the common generic PCI host schema.
The HiSilicon ECAM and Cavium ThunderX PEM bindings have an additional
'reg' entry, but are otherwise the same binding as well.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrew Murray <andrew.murray@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Rob Herring <robh@kernel.org>
