From fe358e57afebc33b083551aed5e0093a7ec6db14 Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis Date: Mon, 10 Jun 2024 01:38:22 +0200 Subject: [PATCH] iio: chemical: bme680: Modify startup procedure Modify the startup procedure to reflect the procedure of the Bosch BME68x Sensor API. The initial readings and configuration of the sensor need to happen in the following order: 1) Read calibration data [1,2] 2) Chip general configuration [3] 3) Gas configuration [4] After the chip configuration it is necessary to ensure that the sensor is in sleeping mode, in order to apply the gas configuration settings [5]. Also, after the soft reset, it is advised to wait for 5ms [6]. Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L162 # [1] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L44 # [2] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L53 # [3] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L60 # [4] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L640 # [5] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L294 # [6] Signed-off-by: Vasileios Amoiridis Link: https://patch.msgid.link/20240609233826.330516-12-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/chemical/bme680.h | 2 ++ drivers/iio/chemical/bme680_core.c | 21 ++++++++++++++------- 2 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h index 7d0ff294725a..b2c547ac8d34 100644 --- a/drivers/iio/chemical/bme680.h +++ b/drivers/iio/chemical/bme680.h @@ -63,6 +63,8 @@ #define BME680_MEAS_TRIM_MASK GENMASK(24, 4) +#define BME680_STARTUP_TIME_US 5000 + /* Calibration Parameters */ #define BME680_T2_LSB_REG 0x8A #define BME680_H2_MSB_REG 0xE1 diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c index a54460fddc91..0390c298fdd8 100644 --- a/drivers/iio/chemical/bme680_core.c +++ b/drivers/iio/chemical/bme680_core.c @@ -531,6 +531,11 @@ static int bme680_gas_config(struct bme680_data *data) int ret; u8 heatr_res, heatr_dur; + /* Go to sleep */ + ret = bme680_set_mode(data, false); + if (ret < 0) + return ret; + heatr_res = bme680_calc_heater_res(data, data->heater_temp); /* set target heater temperature */ @@ -866,6 +871,8 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap, return ret; } + usleep_range(BME680_STARTUP_TIME_US, BME680_STARTUP_TIME_US + 1000); + ret = regmap_read(regmap, BME680_REG_CHIP_ID, &data->check); if (ret < 0) { dev_err(dev, "Error reading chip ID\n"); @@ -878,6 +885,13 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap, return -ENODEV; } + ret = bme680_read_calib(data, &data->bme680); + if (ret < 0) { + dev_err(dev, + "failed to read calibration coefficients at probe\n"); + return ret; + } + ret = bme680_chip_config(data); if (ret < 0) { dev_err(dev, "failed to set chip_config data\n"); @@ -890,13 +904,6 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap, return ret; } - ret = bme680_read_calib(data, &data->bme680); - if (ret < 0) { - dev_err(dev, - "failed to read calibration coefficients at probe\n"); - return ret; - } - return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_NS_GPL(bme680_core_probe, IIO_BME680);